Humax Ir Free Users Manual
IR-ACE II to the manual 74a75294-b62d-4788-af17-8ff187f43fb4
2015-01-21
: Humax Humax-Ir-Free-Users-Manual-351543 humax-ir-free-users-manual-351543 humax pdf
Open the PDF directly: View PDF 
.
Page Count: 36
| Download | |
| Open PDF In Browser | View PDF |
**
Thank you for purchasing a HUMAX product. Please read this user’s manual carefully to be able to
safely install, use and maintain the product at maximum performance. Keep this user’s manual next
to your product for future reference. The information in this user’s manual is subject to change
without notice.
**
Copyright (Copyright © 2008 HUMAX Corporation)
Not to be copied, used or translated in part or whole without HUMAX’s prior consent in writing
except approval of ownership of copyright and copyright law.
**
Warranty
This warranty does not cover parts which may become defective due to misuse of the information
contained in this manual.
**
Trademarks
Irdeto is a trademark of Irdeto Access B.V.
**
Warnings, Cautions and Notes
Throughout the whole manual, pay special attention to the following marks that indicate hazardous
situations.
**
•
Warning
Indicates a hazardous situation which could result in serious injury.
•
Caution
Indicates a situation which could damage the equipment or other apparatus.
•
Note
Indicates additional information to make the user aware of possible problems and information
of any importance to help understand, use, and maintain the installation.
**
Meaning of Symbols
To reduce the risk of electric shock, do not remove cover(or back). No user
serviceable parts inside. Refer servicing to qualified service personnel.
This symbol indicates dangerous voltage inside the product that presents a risk of
electric shock or personal injury.
This symbol indicates important instructions accompanying the product.
**
Instruction about the ‘WEEE’ Symbol
This product should not be disposed with other household wastes at the end of its
working life. Please separate this from other types of wastes and recycle it responsibly
to promote the sustainable reuse of material resources. This will prevent possible
harm to the environment or human health from uncontrolled waste disposal.
**
Domestic users: Please contact either the retailer where you purchased this product or their local
government office for details of where and how they can take this item for environmentally safe
recycling.
Business users: Contact your supplier and check the terms and conditions of the purchase
contract. This product should not be mixed with other commercial wastes for disposal.
**
This product has been manufactured to comply with international safety standards. Please read the
following safety precautions carefully.
**
Safety Instructions and Precautions
**
1. MAINS SUPPLY
90-250V AC 50/60Hz
• Operate this product only from the type of power supply indicated on the marking label. If
you are not sure of the type of power supplied to your home, consult your local power
company.
•
Disconnect the product from the mains before you start any maintenance or installation
procedures.
2. OVERLOADING
• Do not overload a wall outlet, extension cord or adapter as this may result in electric fire or
shock.
3. LIQUID
• The product should not be exposed to liquid of any kind. In addition, no objects filled with
liquid should be placed on the apparatus.
4. CLEANING
• Disconnect the product from the wall outlet before cleaning.
•
Use a light damp cloth (no solvents) to dust the product.
5. VENTILATION
• The slots on top of the product must be left uncovered to allow proper airflow into the unit.
•
Do not stand the product on soft furnishings or carpets.
•
Do not stack electronic equipments on top of the product.
6. ATTACHMENTS
• Do not use any unsupported attachments as these may be hazardous or cause damage to
the product.
7. CONNECTION TO THE SATELLITE DISH LNB
• Disconnect the product from the mains before connecting or disconnecting the cable from
the satellite dish. Failure to do so can damage the LNB.
8. CONNECTION TO THE TV
• Disconnect the product from the mains before connecting or disconnecting the cable from
the TV. Failure to do so can damage the TV.
9. EARTHING
• The LNB cable must be earthed to the system earth for the satellite dish.
10.LOCATION
• Place the product indoors to avoid exposing it to lightning, rain or sun.
•
Do not place it near a radiator or heat register.
•
Make sure it has more than 10 cm clearance from any appliances susceptible to
electromagnetic influences, such as a TV or a VCR.
•
Do not block the openings with any object, and do not place the product on a bed, sofa,
rug, or other similar surface.
•
If you place the product on a rack or a bookcase, ensure that there is adequate ventilation
and that you have followed the manufacturer’s instructions for mounting.
•
Do not place the product on an unstable cart, stand, tripod, bracket, or table where it can
fall.
•
A falling product can cause serious injury to a child or adult, and serious damage to the
appliance.
11.LIGHTNING, STORM OR NOT IN USE
• Unplug the product from the wall outlet and disconnect the antenna during a thunderstorm
or when left unattended and unused for long periods of time. This will prevent damage to
the unit due to lightning and power-surges.
12.EXTRANEOUS OBJECTS
• Do not insert anything through the openings in the unit, where they can touch dangerous
voltage points or damage parts.
13.REPLACEMENT OF PARTS
• When replacement of parts is required, be sure the service technician uses replacement
parts specified by the manufacturer or those that have the same characteristics as the
original part. Unauthorized substitution may result in additional damage to the unit.
**
Warning
**
The mains plug, as a disconnection device, shall remain readily accessible by the user.
**
1. To avoid damage of the power cord or plug;
• Do not modify or process the power cord or plug arbitrarily.
•
Do not bend or twist the power cord.
•
Make sure to disconnect the power cord holding the plug.
•
Keep heating appliances as far as possible from the power cord in order to prevent the
cover vinyl from melting.
•
The main plug shall remain readily operable.
2. To avoid electrical shock;
• Do not open the main body.
•
Do not insert metal or inflammable objects inside the product.
•
Do not touch the power plug with wet hands.
•
Disconnect the power cord in case of lightning.
3. To avoid damage of product;
• Do not use the product when it is out of order. If you continue to use the product when
defective, serious damage can be caused to it. Make sure to contact your local product
distributor if the product is out of order.
•
Do not insert metal or alien substance into the slots for the modules or Smartcards. It may
cause damage to the product and reduce its life span.
1. Before Using the Product . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.1 Package Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.2 Front Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.3 Rear Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.4 Remote Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
GB7
GB7
GB8
GB12
GB13
2. Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . GB15
3. Installation Wizard. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
3.1 Language . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
3.2 Humax Auto Search . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
3.3 Time Setting. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
3.4 Result . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
GB16
GB16
GB16
GB17
GB17
4. Channel List . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . GB18
4.1 Simple/Advanced Channel List. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . GB19
4.2 Option in Channel List . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . GB19
5. TV Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . GB20
5.1 Viewing TV Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . GB20
5.2 Using TV Guide. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . GB21
6. Parental Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . GB22
7. Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
7.1 System Setting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
7.2 Organising Channels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
7.3 Channel Search . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
7.4 Status . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
7.5 Default Setting. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
GB23
GB23
GB24
GB25
GB26
GB26
8. Software Update . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . GB27
8.1 OTA (Over the Air) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . GB27
8.2 Software Update from PC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . GB28
9. Appendix . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
9.1 Trouble Shooting. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
9.2 Error Message. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
9.3 Specification . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
9.4 Service and Support. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
GB29
GB29
GB31
GB32
GB34
!
!
This chapter provides detailed instructions on the product and its accessories.
"
Please check all package contents before using your product.
**
**
Note:
• Faults may occur if the remote control is left without battery for a long time. Always keep the
battery inserted in the remote control.
•
Package contents may vary according to area.
•
The front and rear of the product are subject to change without notice.
#
!
$ %
**
**
1. STANDBY LED
Red light is emitted when the product is in standby mode.
**
2. STANDBY BUTTON
Switches between operation and standby modes.
**
3. VOL BUTTON
Display the volume bar.
**
4. CH-/CH+ or VOL-/VOL+ BUTTON
Moves the TV/Radio channel or volume up/down.
**
5. TV LED
Green light is emitted when the product is in TV mode.
**
6. RADIO LED
Amber light is emitted when the product is in radio mode.
**
7. SMARTCARD SLOT
A slot for a Smartcard
**
Note: The front of the product is subject to change without notice.
&
!
**
**
1. STANDBY LED
Red light is emitted when the product is in standby mode.
**
2. STANDBY BUTTON
Switches between operation and standby modes.
**
3. VOL BUTTON
Display the volume bar.
**
4. CH-/CH+ or VOL-/VOL+ BUTTON
Moves the TV/Radio channel or volume up/down.
**
5. TV LED
Green light is emitted when the product is in TV mode.
**
6. RADIO LED
Amber light is emitted when the product is in radio mode.
**
7. SMARTCARD SLOT
A slot for a Smartcard
**
Note: The front of the product is subject to change without notice.
'
!
**
**
1. STANDBY LED
Red light is emitted when the product is in standby mode.
**
2. TV LED
Green light is emitted when the product is in TV mode.
**
3. RADIO LED
Amber light is emitted when the product is in radio mode.
**
4. STANDBY BUTTON
Switches between operation and standby modes.
**
5. VOL BUTTON
Display the volume bar.
**
6. CH-/CH+ or VOL-/VOL+ BUTTON
Moves the TV/Radio channel or volume up/down.
**
7. SMARTCARD SLOT
Slots for Smartcards
**
Note: The front of the product is subject to change without notice.
(
!
**
**
1. STANDBY LED
Red light is emitted when the product is in standby mode.
**
2. STANDBY BUTTON
Switches between operation and standby modes.
**
3. VOL BUTTON
Display the volume bar.
**
4. CH-/CH+ or VOL-/VOL+ BUTTON
Moves the TV/Radio channel or volume up/down.
**
5. TV LED
Green light is emitted when the product is in TV mode.
**
6. RADIO LED
Amber light is emitted when the product is in radio mode.
**
7. SMARTCARD SLOT
A slot for a Smartcard
**
Note: The front of the product is subject to change without notice.
!
) %
**
1. LNB IN
Connects a satellite antenna cable.
**
2. LNB OUT
Connects another digital satellite receiver.
**
3. RS-232C
Connects to the PC to update software.
**
4. AUDIO L/R
Connects to the TV or VCR using an RCA cable.
**
5. VIDEO
Connects to the TV or VCR using an RCA cable.
**
6. RF IN
Connects to the general aerial antenna or cable.
**
7. RF OUT
Connects to the RF IN of the TV using an RF cable.
8. POWER CORD
Connects to the power cord.
**
Note: The rear panel of the product is subject to change without notice.
!
) * %
1. SOURCE
Currently not supported
**
2. TV/RADIO
Switches between TV and radio modes.
**
3. NUMERIC(0-9) BUTTONS
Enters a TV/radio channel number.
**
4. MENU
Displays the main menu.
**
5. TIME-WHITE
Displays the reservation box while watching a
programme.
Displays the time box in the guide.
**
6. ARROW BUTTONS
Changes the channel or moves the cursor up,
down, left or right.
**
7. i (INFORMATION)-RED
Displays the channel and programme
information.
**
8. SOUNDTRACK-GREEN
Displays the soundtrack list.
**
9. CH-/CH+ or PAGE-/PAGE+
Changes the channel or page.
**
10.RECALL
Returns to the previous channel.
**
11.FREEZE
Freezes the TV screen you are watching. Does
not cease audio.
**
12.WIDE
Sets the display format.
**
Note: The front of the product is
subject to change without
notice.
13.HEPG
Switches between Humax EPG and Standard
EPG.(Not available in IR-ACE II UBI)
!
**
14.STANDBY
Switches between operation and standby modes.
**
15.GUIDE
Displays the standard EPG.
**
16.EXIT
Closes and returns to the previous menu.
**
17.OK
Selects a menu or confirms the selected
operation. Displays the channel list while
watching a programme.
**
18.ZOOM-BLUE
Enlarges the picture.
**
19.SUBTITLE-YELLOW
Displays the subtitle language list.
**
20.V-/ V+
Adjusts the audio volume.
**
21.MUTE
Mutes or unmutes the audio temporarily.
**
22.?
Currently not supported
**
23.UHF
Displays the UHF menu.
**
24.SLEEP
Sets the sleep time.
**
25.FAV
Displays the favourite list.
!+
!+
**
You can connect the product to the TV with the particular equipments for gaining optimum signal
quality. The product provides various interfaces to connect to the TV, VCR or other devices. Select
the most appropriate procedure depending on the equipment you have.
**
1. Connect the antenna to the LNB IN.
2. Connect the product and the TV using an RCA cable.
3. Connect the product and the TV using an RF cable.
4. Connect the power cord of the product to a wall outlet.
5. Power on by pressing the STANDBY button of the remote control or the STANDBY button at
the front of the product.
**
**
Note:
• Connect your aerial or cable to the RF IN to watch analogue channels.
•
Tune the TV to an UHF channel if the product is connected to the TV using an RF cable.
,%% -
,%% -
**
When powering on your product for the first time after purchase, the installation wizard will operate
automatically.
.!
Select the appropriate language from the list and press the
OK button to save. You can also select the language using
the COLOUR buttons.
/!*0 1!
You can search satellite and channels.
Warning: Please note that once you perform Humax Auto Search, all data such as antenna
setting information, channel list and Smartcard information you have already set are
deleted.
1. Select the kind of dish to search satellite. If you select
Motorised dish, channel search will be skipped. You
can configure the setting in the antenna setting
menu.
2. Satellite search will activate.
3. After completing the search operation, the result
window will be displayed.
Note: Humax Auto Search is not available in IR-ACE II
UBI
,%% -
2*
You can set the current time.
Select Current Time/Time Offset/Daylight-Saving Time
and set an option.
Note: Set the current time to receive accurate TV
guide information.
) !%
After all setting is complete, you can view the result screen.
Press the OK button to complete the installation wizard.
#
% .
% .
**
You can display the channel list and switch to other channels.
Five types of channel lists are provided for quick and easy channel search.
**
All (RED)
The list of all TV/radio channels
Favourite (GREEN)
The lists of favourite channels
• Auto : The list of channels classified by frequency in favourite
channel list.
•
Smartcard : The list of channels classified by Smartcard in
favourite channel list (if available).
•
FTA : The list of channels classified by free to air in favourite
channel list.
•
CAS IR : TThe list of channels classified by CAS Irdeto in favourite
channel list.
•
CAS ETC: The list of channels classified by CAS except Irdeto in
favourite channel list.
•
Humax EPG: The list of channels classified by Humax EPG in
favourite channel list.
•
A~D : The list of favourite channels with four subgroups that you
can organize channels by your private taste.
Bouquet (YELLOW)
The lists of channels classified by bouquets
Satellite (BLUE)
The lists of channels classified by satellites
Alphabet (WHITE)
The lists of channels classified by alphabet
**
Note:
• Press the EXIT button to exit the channel list.
•
The sub-groups of favourite channel list exist only after configuration.
•
Each time you press the TV/RADIO button while the channel list is displayed, the channel list
will be switched between TV and radio channel list.
&
% .
*+% 31 4 % .
1. Press the OK button while viewing a programme to
display the channel list. You can also display the
channel list by selecting MENU>Channel
List>Simple/Advanced.
2. Press the COLOUR button to display the
corresponding channel list.
5+ % .
1. Press the MENU button while the channel list is
displayed.
2. Press the EXIT button to save the changes.
**
Add
To add a channel to the favourite groups, select Favourites and select one or more
groups from the four favourite groups. Then press the OK button.
Lock
To lock a channel, select Lock and press the
button. When unlocking a locked
channel, a pop-up requiring your PIN-Code will appear. Enter your PIN-Code.
Skip
To skip a channel, select Skip and press the
Delete
To delete a channel, select Delete and press the OK button. A pop-up will appear.
Select Yes and press the OK button to confirm your choice.
button.
**
Tip:
•
The default PIN-Code is 0000.
•
The default PIN-Code is 8272. (IR-ACE II UBI only)
•
If you have forgotten your PIN-Code, please contact your local product distributor.
'
26
!
26
!
6 7 26
!
You can view the detailed programme information of each channel in time and date order. Press the
GUIDE button or press the MENU button and select TV Guide. Press the EXIT button to exit the TV
guide screen.
**
**
1. Channel & programme information
5. Group name
2. Video preview window and channel number
6. Icon
3. Indication of present time
7. Table date & time range
4. Present date and time
**
Displayed only when there is any information of programme.
Displayed only if the programme is reserved for watching.
Represents parental level. Indicates the minimum level of age for viewing the
programme.
Displayed only when the channel is a scrambled channel.
(
26
!
26
!
**
You can also customise your own programme guide to list the channels or programmes of interest
to you and schedule your viewing using the programme information.
**
Style
Each time you press the RED button, the style of TV guide changes in main,
weekly, quick mode order.
Find
Press the GREEN button to find a programme. You can select Keyword and
Genre using the
button
Schedule
Press the YELLOW button to display the list of the reserved programme.
• Press the RED button to delete the programme.
•
Press the GREEN button to make new reservations.
Group
Press the BLUE button. A pop-up will appear. Press the COLOUR button to
display the corresponding channel group and select the sub channel group.
Humax EPG
You can view the programme information of all channels using Humax EPG. Press
the HEPG button to display the Humax EPG. Press the HEPG button again to
switch to the standard EPG.
**
**
Note:
• All features are similar to those of standard EPG.
•
You can use Humax EPG only when the antenna is set to Nilesat.
•
Humax EPG is not available in IR-ACE II UBI.
% %
% %
**
You can set rating limits for each programme according to the age of the viewer or change your
previous PIN-Code.
**
1. Press the MENU button.
2. Select Parental Control and press the OK button.
You will be prompted to enter your PIN-Code. Enter
the PIN-Code using the NUMERIC(0-9) buttons.
**
Tip:
•
The default PIN-Code is 0000.
•
The default PIN-Code is 1234. (IR-ACE II UBI only)
•
If you have forgotten your PIN-Code, please contact your local product distributor.
# ,%%
# ,%%
**
You can configure the installation setting and perform channel search.
Tip:
•
The default PIN-Code is 0000.
•
The default PIN-Code is 8272. (IR-ACE II UBI only)
•
If you have forgotten your PIN-Code, please contact your local product distributor.
# *
**
1. Press the MENU button.
2. Select Installation and press the OK button.
3. Select System Setting and press the OK button.
OSD Language
can set the default language for menu, audio, and
subtitle.
**
Time Setting
You can set the current time, and turn the product on or
off automatically. Once you set the Wakeup time and
Sleep time, the product is turned on and off everyday.
A/V Output Setting
You can adjust the audio output, match the screen ratio to your TV, select display format
according to the screen ratio, select TV standard.
UHF Tuning
You can select the channels and set the PAL standard and offset to adjust fine tuning setting.
CH21~CH69
PAL I/G for Europe
CH28~CH69
PAL B for Europe/Australia
CH13~CH62
PAL D for China
CH21~CH69
PAL K for Russia
**
Note: You must tune the TV to an UHF channel, if the product is connected to the TV using the
RF cable.
**
Other Settings
You can adjust the OSD transparency, set the display time of the i-plate when switching services
and set OSD skin, screen saver and waiting time.
# ,%%
#
5 %
1. Press the MENU button.
2. Select Installation and press the OK button.
3. Select Organising Channels and press the OK
button.
Organising TV/Radio Channels>Organising All
Channels
You can delete, move, lock, skip or rename the
channels you have chosen.
**
Delete
Press the RED button to select the channel you want to delete.
Move
Press the GREEN button to select the channel you want to move. Move the cursor
to the destination in the channel list and press the OK button.
Lock
Press the YELLOW button to select the channel you want to lock. To watch
locked channels, you will be prompted to enter your PIN-Code.
Skip
Press the BLUE button to select the channel you want to skip. To cancel, press
the BLUE button again.
Rename
Press the WHITE button to select the channel you want to rename. A keyboard
will appear. Enter the name on the keyboard screen. When entering the channel
name is complete, press the YELLOW button.
**
Organising TV/Radio Channels>Organising Favourite Group A~D
You can add channels to favourite list. Select a channel in the channel list you want and press
the OK button.
**
Organising Satellite
You can delete a satellite. Select from the satellite list and press the RED button.
# ,%%
**
# %
1. Press the MENU button.
2. Select Installation and press the OK button.
3. Select Channel Search and press the OK button.
Humax Auto Search
You can automatically search satellites and channels
without entering any other information. Refer to the 3.2
Humax Auto Search.
**
Antenna Setting
You can set antenna and LNB information to search
services.
Fixed Antenna
You can set antenna and LNB information to search services
Motor Antenna
Set Motorised System in antenna setting to Enable before performing
channel search.
**
Automatic Search
You can automatically search the satellite without entering any other information.
**
Manual Search
You can search services of the selected satellite by transponders using the transponder
information.
**
SMATV Search
You can search SMATV automatically or manually.
**
Note: Humax Auto Search is not available in IR-ACE II UBI.
# ,%%
# !
**
1. Press the MENU button.
2. Select Installation and press the OK button.
3. Select Status and press the OK button.
STB Status
You can confirm the information of the STB.
**
Signal Detection
You can display the percentage of signal strength and
quality.
**
Humax SW Update
You can update software automatically or manually. When completing the software update, the
product is automatically powered off and again.
**
Note:
To perform software update, you will be prompted to enter your PIN-Code. Enter the
PIN-Code using the NUMERIC(0~9) buttons.
**
Irdeto SW Update
When OTA is available, Irdeto SW Update is activated.
Conditional Access
You can check the information of the conditional access components.
Mail Message
You can receive mail sent by the broadcasting company.
**
# 8 !%
You can restore the product to the factory default.
**
1. Press the MENU button.
2. 2. Select Installation and press the OK button.
3. Select Default Setting and press the OK button.
4. Enter your PIN-Code.
5. When default setting is completed, the installation wizard pops up automatically and assists
channel search.
& 7 +
& 7 +
In order to maintain proper performance of the product, it is essential to have the most up-to-date
software. Visit the Humax website to check the latest news and newly released software versions. –
http://www.humaxdigital.com. It is recommended that you periodically check for the availability of
software update.
& 521 954 1:
OTA, an abbreviation of Over–the-Air, is a standard for the transmission of software through a
broadcast system.
OTA is simply an alternative method for downloading software versions. However, the
manufacturers reserve the right for deciding the release of the software for their products by
beaming the latest software versions over the air via satellite. Note that OTA is only limited to
certain geographical regions mainly due to different antennas having different footprints(area where
the signal can be received). The software update via satellite will only occur under the following
circumstances.
1. The equipment should have appropriate loader software.
Caution:
• Please note that if normal loader software is not equipped, the product may not be updated or
operate properly after software update.
**
2. The manufacturer decides to release the software via a designated satellite.
3. The equipment must be tuned properly to the same antenna equivalent to that of the
manufacturer.
4. Update software when the signal strength and quality is high. If the weather is not favorable,
and the signal strength and quality are not recommendable, perform the software update
later.
Caution:
• Please be careful to keep the power on and the power cord plugged in during software
update. If the power is off during software update, fatal damage may be caused to the
product.
•
Please be careful not to pull out the signal line (LNB cable) during software update. Update
may be interrupted and the product may not operate.
Caution:
• It may take 5 ~10 minutes to update software.
•
Other functions will not activate while software update takes place.
•
You cannot schedule recording during software update.The installation wizard pops up
automatically and assists channel search.
#
& 7 +
&
7 + *
You can connect your product to the PC directly and update your software by transferring the new
software from the PC. Follow these steps to download new software from PC to this product.
**
1. Download the new software file equivalent for this product model from the Humax website
(http://www.humaxdigital.com).
2. Download and install the download tool.
3. Connect your PC to this product with an RS-232C serial cable.
4. Execute the installed download tool and follow the instructions provided.
5. Power On/Off to start operating.
**
&
' 1++ 0
' 1++ 0
' 2!;%
Before contacting your local service centre, please read the tips below carefully. If the problem
persists after completing the following procedure, please contact your local product distributor or
service centre for further instructions.
1. No message displayed on the front panel. (The product will not switch on.)
• Check the main power cable and make sure it is plugged into a suitable power outlet.
•
Check that the mains supply is switched on.
•
Check that the power switch is on at the rear of the product. (where applicable)
•
Connect the power cable to a different power outlet.
2. No picture on TV set
• Make sure that the product is powered on and in operation mode. (Press the STANDBY
button)
•
Make sure that the AV cable is firmly connected to the TV.
•
Make sure that the antenna cable is properly connected to the product.
•
Make sure that the antenna setting in the menu is correct.
•
Check the brightness level of the TV.
•
Check if the channel is currently on air. Contact the broadcaster to ensure that the channel
is running.
3. Poor picture/sound quality
• Install the antenna in an obstacle-free place.
•
Make sure there is no mobile phone or microwave oven near the product.
•
Keep the power and the antenna cable for the satellite apart from each other.
•
Check the signal levels and adjust your antenna if the level is too low. The signal level
may be affected by weather conditions.
•
Check that your dish alignment is correct.
•
Change the satellite dish for a larger one as this will increase the signal levels received.
•
Replace the LNB with a lower noise factor in cases where the noise factor is too high.
•
Replace the LNB with a new one in case it is damaged or out of order.
Note: If the antenna is covered with snow or the RF is weakened by heavy rain, the condition
of the sound and picture may temporarily be poor. However, the poor sound and picture
quality due to weather conditions cannot be accepted as a malfunction of product.
'
' 1++ 0
4. No or poor sound
• Check that your AV cable is connected correctly.
•
Check the volume levels of your TV set and the product.
•
Check if the product or TV is on mute.
•
Check audio type or soundtrack option in the AV menu.
5. Remote control does not operate.
• To control the product, the top end of the remote control should point directly towards the
receiving part of the product.
•
Remove and reinsert the batteries in the remote control.
•
Replace the batteries in the remote control for a new set.
6. Cannot make reservations.
• Check that no previous reservations are conflicting with the new reservation.
•
Check that the product is switched on at the time of the reservation.
7. No PIN-Code information is given.
• The default PIN-Code is always 0000.
•
The default PIN-Code is 1234 for Parental Control. (IR-ACE II UBI only)
•
The default PIN-Code is 8272 for Channel List and Installation. (IR-ACE II UBI only)
8. Channel search does not work.
• Make sure that the antenna setting in the menu is correct.
9. Cannot update new software.
• You can get an update. If the product does not show a message requesting update, that
means no software is available.
10.Cannot watch scrambled channels.
• Check that you have the appropriate Smartcard. Reinsert the Smartcard and make sure it
initializes correctly.
•
Check in the menu that the product is detecting the Smartcard.
•
Check in the menu that you have a valid and working subscription to the channels you
wish to view.
•
Ensure that the Smartcard is not damaged.
11.Cannot watch pay channels.
• Check in the menu that you have a valid and working subscription to the channels you
wish to view.
•
(
Contact your network operator for more information.
' 1++ 0
'
< =
Error message
No or bad signal
Possible causes
What to do
The satellite dish is not pointing at Adjust dish alignment.
the satellite.
Signal is too weak.
Increase the LNB voltage or connect a
signal amplifier.
Satellite dish is too small.
Change to a larger dish.
Problem with LNB.
Change the LNB.
Wrong antenna setting.
Set the antenna correctly.
The channel is
The channel has a signal, but no
scrambled or not audio or video is provided.
available.
Confirm if the channel is currently on air.
The channel has not been deleted Remove the channel from the channel list
by broadcasting company.
and check for new transponder details.
The channel is for data
broadcasting.
The channel cannot be viewed with the
appropriate model that supports data
channels.
Smartcard is not plugged in.
Insert Smartcard.
Wrong Smartcard is in use.
Insert the appropriate Smartcard for the
channel(s) you wish to view.
Smartcard is not plugged in
correctly.
Reinsert Smartcard; ensure that it is
inserted correctly.
Smartcard is damaged.
Contact your Smartcard retailer or
channel broadcaster for a Smartcard
replacement.
Audio not
available.
The channel has a video signal,
but no audio is provided.
Press the audio button on your remote
control to confirm that the channel has
audio options.
Short LNB
LNB cable is short.
Replace LNB Cable.
LNB is internally short.
Replace LNB.
LNB In port is inserted by alien
substance or damaged.
Remove the alien substance and contact
local service center in case damage has
occurred.
' 1++ 0
' +
Tuner & Channel
Input Connector
IEC 169-24 female (F-Type)
Frequency Range
950MHz to 2150MHz
Signal Level
-25 to -75 dBmV
LNB Power & Polarization
Vertical: 13.5V
Horizontal: 18V
Current: Max. 500mA, Overload Protection
22kHz Tone
Frequency: 22±4kHz Amplitude: 0.6±0.2V
DiSEqC Control
Version 1.0/1.2/2.0 Compatible, USALS
Demodulation
QPSK
Input Symbol Rate
1~45 Ms/s
FEC Mode
1/2, 2/3, 3/4, 5/6 and 7/8
MPEG Transport Stream A/V Decoding
Transport Stream
MPEG-2 ISO/IEC 13818
Profile Level
MPEG2 MP@ML
Video Input Rate
15 Mbit/s Max
Aspect Ratio
4:3, 16:9
Video Resolution
720 x 576, 720 x 480
Audio Decoding
MPEG-2 Audio/MusiCam Layer I & II
Audio Mode
Single/Dual/Joint stereo/Stereo
Memory
Flash Memory
2 Mbytes
Graphic (MPEG)/System DRAM
16 Mbytes
RF Modulator
RF Input/Loopthrough output
75
Frequency
47 ~ 862 MHz
Output Channel
CH 21~69
TV Standard
PAL B/G/I/D/K
, IEC 169-2
' 1++ 0
A/V & Data In/Out
Video
1 Output RCA (CVBS)
Audio
2 Output RCA (Audio L/R)
RS-232C
9 pin Socket type
Power Supply
Input Voltage
90~250V AC, 50/60Hz
Type
SMPS
Power Consumption
Operation - Max. 30W
Standby – Max. 9W
Protection
Separate internal fuse & Lightning protection
Physical Specifications
Size
260 x 50 x 182 mm
Weight (Net)
1.2 Kg
Operating Temp
0 ºC to +45 ºC
Storage Humidity
5%~95% RH (Non-condensing)
' 1++ 0
' 4 !++
Information concerning troubleshooting, software upgrade and product support is provided in the
following websites and call centers.
Should your product require warranty service, please contact HUMAX to obtain the appropriate
authorization.
/ =1> %%
*
Tel:
01805-778870 (€0,14/min)
Opening Hours:
Mo-Fr 8:00-23:00 Uhr, Sa-So 8:00-20:00 Uhr
E-mail:
support@humax-digital.de
Website:
www.humax-digital.de
Language:
Deutsch/English/Turkish
?
Tel:
0870 247 8800
Opening Hours:
Mon-Fri 8:30-21:00
E-mail:
uksupport@humax-digital.co.uk
Website:
www.humax-digital.co.uk
Language:
English
=
% < 98!;@ 1<:
Tel:
+971 (0)4 359 2323
Opening Hours:
Sat-Wedn 09:00-18:00
Thurs 09:00-14:00 (Closed on Fri)
E-mail:
callcenterME@humaxdigital.com
http://www.humaxdigital.com/arabia/support
Website:
www.humaxdigital.com
Language:
Arabic/English
( 1++ 0
1!%
Tel:
1800 613 011
Opening Hours:
Mon- Fri 9:00-17:30
E-mail:
techinfoau@humaxdigital.com
Website:
www.humaxdigital.com/australia
Language:
English
,%
Tel:
899 100 080 (€1+ VAT/min)
Opening Hours:
Local time in Italy (GMT+1)
Mon-Fri 8:00 – 18:00
Language:
Italian
7
Tel:
+46 (0)550 85527
Opening Hours:
Mon-Fri 8:00-16:30
Language:
Swedish/English
$%
Tel:
+358 9 56186 130
Opening Hours:
Mon-Fri 8:00-16:00
Language:
Finnish/English
1!
Tel:
0820 400675 (€0,14/min)
Opening Hours:
Mon-Sun 8:00-23:00
E-mail:
support@humax-digital.de
Website:
www.humax-digital.de
Language:
Deutsch/English/Turkish
**
Note: For hardware repair, please visit our website.
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.4 Linearized : Yes XMP Toolkit : Adobe XMP Core 4.0-c316 44.253921, Sun Oct 01 2006 17:14:39 Producer : Acrobat Distiller 8.1.0 (Windows) Modify Date : 2008:11:26 11:29:06+09:00 Create Date : 2008:11:26 11:29:06+09:00 Metadata Date : 2008:11:07 19:17:40+09:00 Format : application/pdf Title : untitled Document ID : uuid:63845aa7-218b-4842-809d-def2b40fa51e Instance ID : uuid:94730390-ed29-4d6a-b30d-03f842c9966c Page Count : 36EXIF Metadata provided by EXIF.tools