User Manual
HD Digital Receiver User’s Manual XI3-H Notice Notice The warranty does not cover parts which may become defective due to misuse of the information contained in this manual. Thank you for purchasing a HUMAX product. Please read this user’s manual carefully to be able to safely install, use and maintain the product at maximum performance. Keep this user’s manual next to your product for future reference. The information in this user’s manual is subject to change without notice. Copyright (Copyright © 2013 HUMAX Corporation) Not to be copied, used or translated in part or whole without HUMAX’s prior consent in writing except approval of ownership of copyright and copyright law. Meaning of Symbols To reduce the risk of electric shock, do not remove cover (or back). No user serviceable parts inside. Refer servicing to qualified service personnel. This symbol indicates dangerous voltage inside the product that presents a risk of electric shock or personal injury. This symbol indicates important instructions accompanying the product. Warnings, Cautions and Notes Throughout the whole manual, pay special attention to the following marks that indicate hazardous situations. ‘WEEE’ Instructions This product should not be disposed with other household wastes at the end of its working life. Please separate this from other types of wastes and recycle it responsibly to promote the sustainable reuse of material resources. This will prevent possible harm to the environment or human health from uncontrolled waste disposal. Domestic users: Please contact either the retailer where you purchased this product or their local government office for details of where and how they can take this item for environmentally safe recycling. Business users: Contact your supplier and check the terms and conditions of the purchase contract. This product should not be mixed with other commercial wastes for disposal. Trademarks Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are trademarks of Dolby Laboratories. HDMI, the HDMI Logo, and High-Definition Multimedia interface are trademarks and registered trademarks of HDMI Licensing LLC. This item incorporates copy protection technology that is protected by U.S. patents and other intellectual property rights of Rovi Corporation. Reverse engineering and disassembly are prohibited. Warning Indicates a hazardous situation which could result in serious injury Caution Indicates a situation which could damage the equipment or other apparatus Note Indicates additional information to make the user aware of possible problems and information of any importance to help understand, use and maintain the installation. Warranty GB1 For Your Safety For Your Safety Safety Instructions 1. POWER SUPPLY • Operate this product only from the type of power supply shown on the marking label. If you do not know the type of power supplied to your home, contact your local power company. • Disconnect the power supply before you start any maintenance or installation procedures. 2. OVERLOADING • Make sure that the wall outlet, extension cord and adapter have a sufficient power rating for the appliance. If not, this can cause an electric fire shock. 3. LIQUID • Do not expose this product to liquids. Do not put objects filled with liquid on the product. 4. CLEANING • Disconnect the product from the wall outlet before you clean it. • Use a moist cloth to clean the product. Do not use solvents. Wipe the surface gently with a soft cloth as it may get scratched. 5. VENTILATION • Make sure that the slots on top of the product are not blocked. It is necessary to have a sufficient airflow into the unit. • Do not put electronic equipment on the product. • Do not put objects on the product. This will block the ventilation or cause damage to the surface. 6. ATTACHMENTS • Do not use any unsupported attachments as these may be hazardous or cause damage to the product. 7. LIGHTNING, STORM OR NOT IN USE • Unplug the product from the wall outlet and disconnect the antenna during a thunderstorm or when left unattended and unused for long periods of time. This will prevent damage to the unit due to lightning and power-surges. GB2 8. EXTRANEOUS OBJECTS • Do not insert anything through the openings in the unit, where they can touch dangerous voltage points or damage parts. 9. REPLACEMENT OF PARTS • When replacement of parts is required, be sure the service technician uses replacement parts specified by the manufacturer or those that have the same characteristics as the original part. Unauthorised substitution may result in additional damage to the unit. 10. CONNECTION TO THE SATELLITE DISH LNB/CABLE TV SIGNAL/AERIAL • Disconnect the power supply before you connect or disconnect the cable from the satellite dish/cable TV signal/aerial. If not, this can cause damage to the LNB/cable TV line/aerial. 11. CONNECTION TO THE TV • Disconnect the power supply before you connect or disconnect the cable from the TV. If not, this can cause damage to the TV. 12. EARTHING (satellite only) • Earth the LNB cable to the system earth for the satellite dish. 13. LOCATION • Place the product indoors to avoid exposure to lightning, rain or sun. Do not place it near a radiator or heat register. • Keep at least 10 cm clearance from any other appliances susceptible to electromagnetic influences such as a TV or a VCR. • If you place the product on a rack or a bookcase, make sure that there is adequate ventilation and that you have followed the manufacturer’s instructions for mounting. • Do not place the product on an unstable surface where it can fall. A falling product can cause serious injury to a personnel and serious damage to the appliance. 14. Environment • Attention should be drawn to the environmental aspects of battery disposal. • Care is required for the use of this apparatus in tropical and/or moderate climates. Cautions and Warnings 1. To avoid damage of the power cord or plug • Do not modify or process the power cord or plug arbitrarily. • Do not bend or twist the power cord. • Make sure to disconnect the power cord while you hold the plug. • Keep heating appliances as far as possible from the power cord to prevent the cover vinyl from melting. • The mains plug, as a disconnection device, shall remain readily accessible by the user. 2. To avoid electrical shock • Do not open the main body. • Do not insert metal or inflammable objects inside the product. • Do not touch the power plug with wet hands. • Disconnect the power cord in case of lightning. • Unplug the power cable before you install the antenna cable. 3. To avoid damage of product • Do not use the product when it is out of order. If you continue to use the product when defective, this may cause serious damage. Make sure to contact the customer service centre if the product is out of order. • Do not insert metal or alien substance into the slots for the modules or Smartcards. It may cause damage to the product and reduce its life span. 4. To avoid damage of the hard disk drive (PVR only) • Do not move the product or turn the power off suddenly while the hard disk drive is running. • The company shall not be liable for any corruption of data on the hard disk drive caused by carelessness or misuse of the user. Safety Important Safety Instructions INFORMATION TO THE USER 1. 2. 3. 4. 5. 6. 7. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: Read these instruction. Keep these instruction. Heed all warnings. Follow all instructions. Do not use this apparatus near water Clean only with dry cloth. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. 8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. 9. Do not defeat the safety purpose of the polarized or grounding-type plug. A plozrized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an delctrician for replacement of the obsolete outlet. 10. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus. 11. Only use attachments/accessories specified by the manufacturer. 12. Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over. 13. Unplug this apparatus during lightning storms or when unused for long periods of time 14. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as powersupply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped. (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operations. WARNING Changes or modifications not expressly approved by the manufacturer could void the user’s authority to operate the equipment. “CAUTION : Exposure to Radio Frequency Radiation. Antenna shall be mounted in such a manner to minimize the potential for human contact during normal operation. The antenna should not be contacted during operation to avoid the possibility of exceeding the FCC radio frequency exposure limit. The minimum separation distance of 20cm from the antenna to the body of user required.” WARNING To reduce the risk of fire or electric shock, do not expose this product to rain or moisture. The apparatus shall not be exposed to dripping or splashing and no objects filled with liquids, such as vases, shall be placed on the apparatus. GB3 Quick Start Guide Front Rear Note: The image may differ from the actual product. Note: The image may differ from the actual product. Power: Switches between operation and standby modes Lights green when the power is on Remote: Lights green when the remote control is in use Data: Lights amber when the product is receiving data Record: Lights red when the recording is in progress SD Card: Insert a SD card Note: • You can find another SD card slot on the bottom of the product. • The product information label is on the bottom of the product. GB4 Cable In: Connect to a coaxial cable from your service provider. To TV: Use a coaxial cable to connect to a TV or VCR for analog video and audio. Digital Audio Out: Use an S/PDIF cable to connect to the digital audio system. HDMI HD To TV: Use an HDMI cable to connect to the TV. HDMI Input: Use an HDMI cable to connect to another HD device. Ethernet: Use an Ethernet cable to connect to the network. USB: Connect a USB storage device. (5V 500mA) Power: Use the AC adaptor to connect to the power supply. Note: • You can find another SD card slot on the bottom of the product. • The USB port on the top is for connecting the Wi-Fi dongle. (5V 750mA) Quick Start Guide Connections This section describes how to connect your product to match your particular devices and to gain optimum signal quality. Warning: Connect all devices before you plug any power cords into the wall outlet. Always turn off the product, TV and other devices before you connect or disconnect any cables. Note: If you encounter any problems setting up your product, please contact your local retailer or HUMAX Customer Service. Coaxial Coaxial HDMI Ethernet TV 2-2 2-1 3-1 Note: Make sure you use an adapter approved by UL. GB5 Quick Start Guide Connecting the Antenna Connect a coaxial cable to the Cable In. Note: This connection will allow you to watch another channel while recording a channel or record programmes from two different channels at the same time. Connecting the TV 2-1 Using an HDMI cable For the best picture quality, use an HDMI cable to connect to the TV. 2-2 Using a coaxial cable For analog video and audio, us e a coaxial cable to connect to the TV or VCR. Note: • Use an S/PDIF cable to connect to the digital audio system. • Connecting your TV directly to the audio/video output of the product will assure a more vivid picture and enhance your viewing enjoyment. Connecting the Network 3-1 Connecting to the LAN 1. Use the Ethernet cable to connect the product and the router. GB6 www.humaxdigital.com
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.4 Linearized : No XMP Toolkit : Adobe XMP Core 5.3-c011 66.145661, 2012/02/06-14:56:27 Instance ID : uuid:07d93fa2-9aee-4232-a785-b6097e02dd1a Original Document ID : adobe:docid:indd:d787ccca-be88-11e0-9666-dcb6fbc67a4b Document ID : xmp.id:C31FF127EC32E211A1F7AC88C4593B59 Rendition Class : proof:pdf History Action : converted History Parameters : from application/x-indesign to application/pdf History Software Agent : Adobe InDesign CS6 (Windows) History Changed : / History When : 2012:11:20 17:28:12+09:00 Derived From Instance ID : xmp.iid:C11FF127EC32E211A1F7AC88C4593B59 Derived From Document ID : adobe:docid:indd:d787ccca-be88-11e0-9666-dcb6fbc67a4b Derived From Original Document ID: adobe:docid:indd:d787ccca-be88-11e0-9666-dcb6fbc67a4b Derived From Rendition Class : default Create Date : 2012:11:20 17:28:12+09:00 Modify Date : 2012:11:20 17:28:13+09:00 Metadata Date : 2012:11:20 17:28:13+09:00 Creator Tool : Adobe InDesign CS6 (Windows) Format : application/pdf Producer : Adobe PDF Library 10.0.1 Trapped : False Page Count : 9 Creator : Adobe InDesign CS6 (Windows)EXIF Metadata provided by EXIF.tools