Hunan ZTE ICT Technologies E7 MID User Manual V9

Download:
Mirror Download [FCC.gov]
Document ID	2405568
Application ID	D1kwAqWptTxLqW2MaFPRgw==
Document Description	Users Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	24.01kB (300141 bits)
Date Submitted	2014-09-29 00:00:00
Date Available	2014-09-29 00:00:00
Creation Date	2014-06-05 08:36:09
Producing Software	Microsoft® Office Word 2007
Document Lastmod	2014-09-22 14:37:34
Document Title	V9
Document Creator	Microsoft® Office Word 2007
Document Author:	LHW

E7+
Quick Start Guide
LEGAL INFORMATION
Copyright © 2013HUNAN ZTEICT TECH. CO., LTD
All rights reserved.
No part of this publication may be excerpted, reproduced, translated or utilized in any
form or by any means, electronic or mechanical, including photocopying and microfilm,
without the prior written permission of
HUNAN ZTEICT TECH. CO., LTD
The manual is published by HUNAN ZTEICT TECH. CO., LTD. We reserve the right to
make modifications on print errors or update specifications without prior notice.
Version No. : R1.0
Edition Time :
2014.04
Manual No. :
Overview
Before Getting Started
1.Insert the SIM card
2. Insert the microSD card
Notes:
microSD logo
is a trademark of the SD Card Association.
3. Charge up
Powering On & Off
1.Press and hold the Power Key until the tablet option screen appears.
2.Touch OK to confirm that you want to turn off the tablet.
Switching Your PAD E7+ to Sleep Mode
Sleep Mode suspends your device to a low-power-consumption state while
the display is off to save battery power. Your device also goes into Sleep
Mode automatically when you leave it idle after a certain period of time
To quickly turn your device to sleep mode, press the Power Key.
Waking Up Your PAD E7+ from Sleep Mode
1. Press the Power Key to activate your screen display
2. Drag the lock icon
out of the circle
Declaration of RoHS Compliance
To minimize the environmental impact and take more responsibility to the
earth we live in, this document shall serve as formal declaration that the PAD
E7+ manufactured by HUNAN ZTEICT LTD. is in compliance with the
Directive 2002/95/EC of the European Parliament - RoHS (Restriction of
Hazardous Substances) with respect to the following substances:
(1)Lead (Pb) (2) Mercury (Hg) (3)Cadmium (Cd)
(4) Hexavalent Chromium (Cr (VI)) (5)Polybrominated biphenyls (PBB’s)
(6)Polybrominated biphenyl ethers (PBDE’s)
(Compliance is evidenced by written declaration from our suppliers,
assuring that any potential trace contamination levels of the substances
listed above are below the maximum level set by EU 2002/95/EC, or
are exempt due to their application.)
The PAD E7+ manufactured by HUNAN ZTEICT LTD., meets the requirements
of EU 2002/95/EC
Disposal of Your Old Appliance
1. When this crossed-out wheeled bin symbol is attached
to a product, it means the product is covered by the
European Directive 2002/96/EC.
2. All electrical and electronic products should be
disposed of separately from the municipal waste
stream via designated collection facilities
appointed by the government or the local
authorities.
3. The correct disposal of your old appliance will help
prevent potential negative consequences for the
environment and human health.
For this product’s recycling information based on WEEE directive, please
send an e-mail to weee@zte.com.cn.
10
FCC RF Exposure Information and Statement
The SAR limit of USA (FCC) is 1.6 W/kg averaged over one gram of tissue.
Device types: E7+(FCC ID: 2ACYS-E7) has also been tested against this
SAR limit. The highest SAR value reported under this standard during product
certification for use at the ear is 0.78
7 W/kg and when properly worn on the body
is 0.77 W/kg. This device was tested for typical body-worn operations with the
back of the handset kept 0 cm from the body. To maintain compliance with FCC
RF exposure requirements, use accessories that maintain a 0 cm separation
distance between the user's body and the back of the handset. The use of belt
clips, holsters and similar accessories should not contain metallic components
in its assembly. The use of accessories that do not satisfy these requirements
may not comply with FCC RF exposure requirements, and should be avoided.
This device complies with part 15 of the FCC rules. Operation is subject to the
following two conditions: (1) this device may not cause harmful interference,
and (2) this device must accept any interference received, including
interference that may cause undesired operation.
NOTE: The manufacturer is not responsible for any radio or TV interference
caused by unauthorized modifications to this equipment. Such modifications
could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for
a Class B digital device, pursuant to part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful interference in
a residential installation. This equipment generates uses and can radiate
radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular
installation.
If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the
following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which
the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help.
changes or modifications not expressly approved by the party responsible for
compliance could
void the user's authority to operate the equipment
48

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : No
Warning                         : Invalid secondary xref table
Tagged PDF                      : No
XMP Toolkit                     : Adobe XMP Core 4.0-c316 44.253921, Sun Oct 01 2006 17:14:39
Create Date                     : 2014:06:05 08:36:09Z
Creator Tool                    : Microsoft® Office Word 2007
Modify Date                     : 2014:09:22 14:37:34+08:00
Metadata Date                   : 2014:09:22 14:37:34+08:00
Format                          : application/pdf
Creator                         : LHW
Title                           : V9
Producer                        : Microsoft® Office Word 2007
Document ID                     : uuid:032f6639-9ae4-4b71-a942-d362cd01a183
Instance ID                     : uuid:c1edf77d-ec7d-49f0-8c11-779008cbe1a4
Has XFA                         : No
Page Count                      : 11
Language                        : zh-CN
Author                          : LHW

EXIF Metadata provided by EXIF.tools