Hunno Technologies MS2600 Fingerprint ID Scanner User Manual EMI Test Report for MS2600 Fingerprint ID Scanner

Hunno Technologies Inc. Fingerprint ID Scanner EMI Test Report for MS2600 Fingerprint ID Scanner

users manual

FingerprintIDMouse MS3500FingerprintIDScanner MS2600User'sManualHunnoTechnologiesInc.
Fingerprint ID Mouse/ScannerMS3500/2600Hunno Technologies Inc.-2-Copyright (c) 1999-2002 Hunno Technologies Inc. All rights reserved.The copyright of this document belongs to Hunno Technologies Inc. No part of this document may becopied or reproduced by any means.MagicSecure is a registered trademark of Hunno Technologies Inc.Microsoft Windows 2000 Professional is a registered trademark of Microsoft Corporation.Microsoft Windows XP Home Edition is a registered trademark of Microsoft Corporation.Microsoft Windows XP Professional Edition is a registered trademark of Microsoft Corporation.All other product names mentioned in this document are the registered trademarks of the correspondingcompanies and are protected by the patent and copyright laws.FCC NoticeThis device complies with Part 15 of the FCC Rules. Operation is subject to thefollowing two conditions: (1) This device may not cause harmful interference,and (2) This device must accept any interference received, includinginterference that may cause undesired operation.This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant topart 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmfulinterference in a residential installation. This equipment generates, uses and can radiate radio frequencyenergy and, if not installed and used in accordance with the instructions, may cause harmful interference toradio communication. However, there is no guarantee that interference will not occur in a particularinstallation. If this equipment does cause harmful interference to radio or television reception, which can bedetermined by turning the equipment off and on, the user is encouraged to try to correct the interference byone or more of the following measures:Reorient or relocate the receiving antenna.Increase the separation between the equipment and receiver.Connect the equipment into an outlet on a circuit difference from that to which the receiver isconnected.Consult the dealer of an experienced radio/TV technician for help.NOTE : The manufacturer is not responsible for any radio or TV interference caused by unauthorizedmodifications to this equipment. Such modifications could void the user's authority to operate theequipment.12F. Sewon Venture Town, 705-18, Yoksam-Dong,Kangnam-Ku, Seoul, 135-080, South KoreaWebsite : http://www.hunno.com/E-mail: support@hunno.com
Fingerprint ID Mouse/ScannerMS3500/MS2600Hunno Technologies Inc. -3-Getting StartedMagicSecure MS3500/MS2600 eliminates the need for user passwords with something can't be stolen orforgotten, tighten network security, simplifies the log-on process, and reduces the costs associated withmanaging corporate networks.MS3500/MS2600, which can be used on almost any surface without a mouse pad, guarantees fastrecognition speed and accuracy.Strong durability of optical sensor shall be efficient for user's Cost Saving Policy.UnpackingMS3500 : USB Fingerprint ID MouseMS3500USB MouseMagicSecureProgram CDSoftwareUser GuideMS2600 : USB Fingerprint ID ScannerMS2600USB ScannerMagicSecureProgram CDSoftwareUser GuideFeaturesWindows 98/ME/2000/XP/NT LogonUSB SupportWeel & Optical Mouse Function, Scroll Function, Zoom FunctionFolder & File EncryptionScreensaver4 Type Security Code (Fingerprint, Password, Fingerprint and/or Password)Boot ProtectionLog Data ManagementWindows XP-Style Icon
/Fingerprint ID Mouse/ScannerMS3500/2600Hunno Technologies Inc.-4-SpecificationsVerification Time : 1.0 secFRR : 0.01%FAR : 0.001%Size of Template : 256 byteResolution : 500 dpiCommunication : USBPower : DC 5V (Bus Power)System requirementsWindows 98/ME, Windows 2000Pentium 133Mhz or above, 32MB RAM, 20MB HDDUSB PortMagicSecure MS3500/MS2600 Part NamesHardware Installation1. Turn on the power of PC1.2. Connecting the MS3500/MS2600.Connect the MS2600 (Fingerprint Identification Device for PC Security) to the USB port of the PC3. Installing Device Drivers.USB InterfaceFingerprint SensorFingerprint SensorUSB InterfaceOptical Sensor
Fingerprint ID Mouse/ScannerMS3500/MS2600Hunno Technologies Inc. -5-Software InstallationThere are three device drivers that should be installed when MS3500(device name) is operated on Windows98 : USB composite device, MS3500(driver name), and USB human interface device. Install MS3500 onlywhen MS3500 is operated on Windows 2000/Window XP.There is one device driver that should be installed when MS2600 is operated on Windows 98/ Windows2000/ Windows XP : MS2600For Windows 981. USB composite device (MS3500)At the Add New Hardware Wizard screen shown above, click Next.At the screen shown above, select Search for the best driver for your device (Recommended),andthen click Next.At the screen shown above, select Specify a location, and then click Next.
Fingerprint ID Mouse/ScannerMS3500/2600Hunno Technologies Inc.-6-At the screen shown above, clicking Next will start the installationWhen the driver installation is complete and the screen indicating that Windows has finishedinstalling USB composite device appears, click Finish.2. MS3500/MS2600At the Add New Hardware Wizard screen shown above, click Next.At the screen shown above, select Search for the best driver for your device (Recommended),andthen click Next.
Fingerprint ID Mouse/ScannerMS3500/MS2600Hunno Technologies Inc. -7-At the screen shown above, insert the MagicSecure CD and select CD ROM drive, and then clickNext.Note: If the path to the CD ROM drive is not found1) Ensure that the CD has been inserted.2) After verifying the CD is inserted, click Back to return to the screen where the drive is specified.3) Select Specify a location, and then click Browse....4) At Folder Browse, specify the CD-ROM drive and click OK.At the screen shown above, clicking Next will start the installation.
Fingerprint ID Mouse/ScannerMS3500/2600Hunno Technologies Inc.-8-When the driver installation is complete and the screen indicating that Windows has finishedinstalling MS3500/MS2600 appears, click Finish.3. USB human interface device (MS3500)At the Add New Hardware Wizard screen shown above, click Next.At the screen shown above, select Search for the best driver for your device (Recommended),andthen click Next.At the screen shown above, select Specify a location, and then click Next.
Fingerprint ID Mouse/ScannerMS3500/MS2600Hunno Technologies Inc. -9-At the screen shown above, clicking Next will start the installation.When the driver installation is complete and the screen indicating that Windows has finishedinstalling USB human interface device appears, click Finish.For Windows MEAt the Add New Hardware Wizard screen shown above select Specify the location of the driver(Advanced), and then click Next.At the screen shown above, insert the MagicSecure CD and select Removable media (Floppy,CD-ROM...), and then click Next.At the screen shown above, clicking Next will start the installation.
Fingerprint ID Mouse/ScannerMS3500/2600Hunno Technologies Inc.-10-When the driver installation is complete and the screen indicating that Windows has finishedinstalling MagicSecure3500 appears, click Finish.For Windows 2000 (MS3500/MS2600)At the Found New Hardware Wizard screen shown above, click Next.At the screen shown above, select Search for a suitable driver for my device (Recommended),and then click Next.At the screen shown above, insert the MagicSecure CD and select CD-ROM drive from Optionalsearch locations, and then click Next.
Fingerprint ID Mouse/ScannerMS3500/MS2600Hunno Technologies Inc. -11-At the screen shown above, clicking Next will start the installation.When the driver installation is complete, and the Completing the Found New Hardware Wizardscreen for MS3500/MS2600 appears, click Finish.For Windows XP (MS3500/MS2600)At the Welcome to the Found New Hardware Wizard screen, select Install from a list or specificlocation (Advanced), and then click Next.Insert the MagicSecure CD and select Search removable media (Floppy, CD-ROM...),andthenclick Next.
Fingerprint ID Mouse/ScannerMS3500/2600Hunno Technologies Inc.-12-When the driver installation is complete and the Completing the Fond New Hardware Wizardscreen for MS3500/MS2600 appears, click Finish.

Navigation menu