Hunter Douglas Window Fashions PC Platinum APP Bridge User Manual Platinum App Bridge Kit

Hunter Douglas Window Fashions Platinum APP Bridge Platinum App Bridge Kit

Platinum App Bridge Kit

ABB Platinum™ App Bridge KitTrousse de pont pour  App PlatinumMCQuick Start GuideGuide de  démarrage rapide You’re ready to use the Platinum App.Vous êtes prêt à utiliser l’App Platinum.A.  Platinum App BridgeB.  Platinum RepeaterA.  Pont pour App PlatinumB.  Répéteur Platinum5© 2012 Hunter Douglas. All rights reserved. All trademarks used herein are the property of Hunter Douglas.© 2012 Hunter Douglas. Tous droits réservés. Toutes les marques de commerce utilisées dans ce document  appartiennent à Hunter Douglas.    U.S. Radio Frequency FCC ComplianceThis device complies with Part 15 of the FCC Rules.  Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and  (2) This device must accept any interference received, including interference that may cause undesired operation.This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:• Reorient or relocate the receiving antenna.• Increase the separation between the equipment and receiver.• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.• Consult the dealer or an experienced radio/TV technician for help.Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.5110540056  9/12Industry CanadaUnder Industry Canada regulations, this radio transmitter may only operate using an antenna of a type and maximum (or lesser) gain approved for the transmitter by Industry Canada. To reduce potential radio interference to other users, the antenna type and its gain should be so chosen that the equivalent isotropically radiated power (e.i.r.p.) is not more than that necessary for successful communication.This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.Industrie CanadaConformément à la réglementation d’Industrie Canada, le présent émetteur radio peut fonctionner avec une antenne d’un type et d’un gain maximal (ou inférieur) approuvé pour l’émetteur par Industrie Canada. Dans le but de réduire les risques de brouillage radioélectrique à l’intention des autres utilisateurs, il faut choisir le type d’antenne et son gain de sorte que la puissance isotrope rayonnée équivalente (p.i.r.e.) ne dépasse pas l’intensité nécessaire à l’établissement d’une communication satisfaisante.Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux appareils radio exempts de licence. L’exploitation est autorisée aux deux conditions suivantes : (1) l’appareil ne doit pas produire de brouillage, et (2) l’utilisateur de l’appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d’en compromettre le fonctionnement.Press the     button on the back of the Platinum™ App Bridge. The light on each Platinum Repeater should turn GREEN. Other controls on the back of the bridge include the RESET button,  which reboots the bridge; and the X button, which erases all your data from the bridge when pressed for 6 seconds.Appuyez sur le bouton     à l’arrière du pont pour App PlatinumMC. Le témoin sur chaque répéteur Platinum doit devenir VERT.Les autres commandes à l’arrière du pont comprennent le bouton de remise à l’état initial (RESET) qui réinitialise le pont; le bouton X qui supprime toutes les données du pont lorsque vous l’enfoncez pendant 6 secondes.PPTest signal to repeater(s).Vérifier l’émission d’un signal vers les répéteurs.
1234Connect power to bridge.Connecter le pont à l’alimentation électrique.Check kit contents.Vérifier le contenu de la trousse.Connect bridge to wireless router.Connecter le pont au routeur sans fil.Distribute repeater(s) as needed.Répartir les répéteurs au besoin.A. Platinum™ App BridgeB.  DC Power SupplyC.  USB Power Supply CableD.  Ethernet CableE.  Platinum Repeater Kit 1 Platinum Repeater  1 DC Power SupplyConnect the USB power supply cable to the power supply and bridge. Plug the power supply into an AC outlet or power strip.Connectez le câble d’alimentation USB au bloc d’alimentation et au pont. Branchez le bloc d’alimentation sur une prise c.a. ou une barre multiprise.Connect the Ethernet cable to the bridge and an open LAN port on your router. The light on the front of the Platinum App Bridge will ash RED while it boots up and then change to a solid GREEN.Connectez le câble Ethernet au pont et à un port LAN ouvert sur votre routeur. Le témoin sur le devant du pont pour App Platinum sera ROUGE et clignotera pendant l’initialisation puis deviendra VERT et stable.One repeater per room with PowerRise® 2.1 and/or PowerGlide® 2.1 window coverings is recommended. See the instructions that came with the Platinum Repeater Kit.On recommande d’installer un répéteur par pièce ayant des couvre-fenêtres avec PowerRiseMD 2.1 et/ou PowerGlideMD 2.1. Consultez les instructions qui accompagnent la trousse de répéteur Platinum.A.  Pont pour App PlatinumMCB.  Bloc d’alimentation c.c.C.  Câble d’alimentation USB D.  Câble EthernetE.  Trousse de répéteur Platinum   1 répéteur Platinum  1 bloc d’alimentation c.c.ABEC DABEC DABECDABEC DABEC D

Navigation menu