Hunter Douglas Window Fashions PIR1 Window Curtain with 2.4GHz User Manual

Download:
Mirror Download [FCC.gov]
Document ID	2581470
Application ID	jcEZbR1wPCcw3+xMNXfdqg==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	91.06kB (1138204 bits)
Date Submitted	2015-04-10 00:00:00
Date Available	2015-04-10 00:00:00
Creation Date	2015-02-04 07:39:41
Document Lastmod	0000-00-00 00:00:00
Document Title	User Manual

Hunwrflaugias
Instructions for PV2 Assembly
ENTER" mm“
{W ‘EHUE’OEU “
Offlffiflb, (NU? CAB L
(an imafimmq}
Connect the Power Source
. Retertn the appropriate secll'arl helaw based on you! alder.
> Fara battery wand, see'll YouHavea Battery Wandm“ lrelvw.
> Fol an npliunal DC power supply see “ll You Have a DC vaer Supply.. '.
lf You Have a Haney Wall
lnslall Batteries Into the Battery Wand
NOTE: Hunter Dnuglas lewmmends AAalkaline narrates he use wlltr are battery—powered assembles. These will prevtde more than one year at
opemllun‘ dependlrlg on usage, Lillllllm and rechargeahle batteries are not recommended.
a Squeeze lhs cap latch to lslease and remove one cap.
I lnslall the Datleltes according to the instructions 0n the battery Wand label
. Replace the cap,
> Allgll the lab wtlh the end 01 lbs wand.
> Press the cap on untrl il latches.
Plug the Powst Cable tnlo the Ballety Wand
- Connect the pawl eanle tearmng fmm (he and or the molar) inla the socket on the battery wand.
I” u Have a DCP WEISU
Connect the Power Supply
I Plug the [towel cable from the motor rule the extenston cable.
I Plug the other end at the extenston cable [Mn the ac pwer supply,
I Plug the DC power supply rnte a standard outlet
WARNING: Keep colds and small pan: (ml 0! Inc lead! alchlldrent They can wrapcolds around lhell‘ necks and STRANGLEJW can also pal
small palls in lhelrrlwlllhs and CHOKE,
WARNlNG: Elecllic shndt and/u! a lire hazard may wcur it [he DC power supply and Games ale not ploperlyinstalled.
Operate the Assembly
Chgcklhg Foyer ourg
I checkm ensure the pawar cam ls nal prmhad
Teslthe Assembly Using lha Manual Control Bullon
Tesllllg lite shade wllll We manual oolllml bulloll will allow you lo enaule lllal
the mater and power suurce are warning culledly.
Press the manual control button to lest operation
> Press the bulloh lo alternately rotate mom“ slept and rotate the other way.
Manual wmnal button
Test the Assembly Uslrlg the Remote
Reler b He PUNEMEN'“ Rem 51MB lu’male l'nlumalnn
To Ilnk a shade to a remote:
‘l
4,
Press and hole I step lursix secunds to put remote in pmgram mode The lights on remote w‘lll pulses to lnoloare it is in
program made.
Press and hold the manual contml bulmn on the assembly,
Whlle continuing to press the manual button. press. Stop on the remote. The molorwlll rotate slightly to Indlcale it has
been linked to the network.
Press and hold I Slop tor slx seconds to exil plogram mode.
To 10]" a shade to a GROUP:
1,
99>
Press and held I stop tor six seoonds to put remote In program mode The lights on remote wlll pulsale to indicate it is in
program moes.
Press desired group number (1 — e) on the remote, The light lor the group number selected will pulsate to show It is
selected,
Press and hold the manual control button on the assembly.
Wblle continuing to press the manual button, Press A Open on the remote. The motor wlll rotate slightly to lndlcale lt
haslalned the group,
Press and hold I stop 1m six seconds lo exit program mode.
To remove a shade frum a group:
1.
Press and hole I Stop lor slx seconds to put remote in pmglam mode The lights on remote wlll pulsate to indicate i| ls ln
program mooe.
Press desired group number t1 — e) on the remote. The llghlfur the group number ssleeted will pulsars to show it is
selecled.
Press and hold the manual control button on the assembly
While wntinulng to press the manual button, press 7 Class on the remote. The shade will log to indicate rt has been
removed from the group.
Radio Contml Overation
Once the assembly has been joined to a group, rsolo wnllol ls used to operate the motor. There ls no need to aim the remote
lowald the assembly being operated. Multiple assemblies can be uperaled at the same time,
Renate Functions:
1.
2.
To wake up remote, press I Stop. The last gmup(s) selected will be hlghllghteo and active.
Press “All" or Groups Hi to select specific shade(s) to move Selecled groups Wlll llghtto show they are selected.
a. Multiple Group number may be selected at s time.
b. To deselect a Group. press the Group number agalrr. The ightlor thatgroup wll go out
Salad (ha A OPEN hutlun to mavs the motor In Dna dirscllorl.
Salem the V CLOSE button to move “19 "10107 in the other directinn
While a motor ls in motion, press A OPEN ar V CLOSE. the uppusile of motor motion to reverse d'lreclion.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : No
Create Date                     : 2015:02:04 07:39:41-05:00
Page Count                      : 3

EXIF Metadata provided by EXIF.tools