Hunter Engineering Center Clamp Brochure TC3700 Family Tire Changer

: Hunter-Engineering Hunter-Engineering-Center-Clamp-Brochure-779994 hunter-engineering-center-clamp-brochure-779994 hunter-engineering pdf

Open the PDF directly: View PDF .
Page Count: 4

L441/ L444 Four-Post Lift

L441/ L444 Four-Post Lift

L441/ L444 Four-Post Lift

TC3700 Family Tire Changer

Easy-to-Use Center-Clamp Tire Changer

Tilted Ergonomic Design

✔ Complete operation performed from one position

✔ Unobstructed access to the lower bead eases

lubrication

Key features at a glance

Motor and Drive

✔ 15- and 7-rpm clockwise speeds, 15 rpm

counterclockwise speed

✔ 850 ft-lbs. of torque

PowerOut™ Bead Loosener

✔ Ergonomic control handle makes large assembly

service easy

✔ Familiar side shovel design with standard

protector sleeve

Blast Inflation

✔ Directs bursts of

compressed air

to easily seat the bead

Moveable Rear Column

✔ Adjustable to handle up to

50-inch diameter tires

OPTIONAL

Bead Press Arm

✔ Assists mounting

diffi cult assemblies

OPTIONAL

✔ Gently loosens

beads

✔ Perform all bead

loosening from an

upright position

Bead Roller System

✔ Simple clamping technique

for all designs

✔ Cam action multiplies

clamping force

✔ Three height positions

Hunter’s TC3700 and Road Force Touch® GSP9700 wheel

balancer eliminate vibration problems, reduce comebacks and

increase customer satisfaction.

The bead rollers safely hold

the tire stationary while the

rim is rotated to complete

match-mounting.

✔ Polymer mount/demount head

resists marring rims

✔ Vertical locking head for wheel

face protection

Intuitive Center Clamp and Adjustable Clamp Support

Match-Mounting Made Easy

Mount/Demount Head

balancer eliminate vibration problems, reduce comebacks and

TC3700SS shown

Bead Roller System

Form 5678-T, 10/14

Copyright © 2014, Hunter Engineering Company

www.hunter.com

Optional wheel lift

eases servicing of

large assemblies.

Allows for more

careful handling of

expensive wheels.

(20-2944-1)

Wheel Lift Package

Flange Plate for Chrome-

Clad and Reverse Wheels

Useful for

chrome-clad

wheels and/or

reverse wheels

where maximum

fi nish protection

is needed. (RP6-G1000A87)

Flange Plate for

Chrome-Clad Wheels

S i m p l i fi e d

fl ange plate for

chrome-clad

wheels only.

(RP6-G1000A123)

19.5" Adaptor

Adapts large

centerbore

wheels to

center-clamp

tire changers.

(20-2341-1)

1014IAP4M.30

Clamping system rotating speed: 7 & 15 CW / 15 CCW

Torque: 850 ft-lbs.

Electrical requirements: 220V, 1 ph, 15 A

Air pressure operating range: 115-175 psi

Tire diameter: 50 in.

Hydraulic bead loosening roller system:

Max. bead roller opening width 21 in.

Diameter range 12-28 in.

Bead roller power; each roller 4,170 lbs. @ 140 psi

(Optional) Side shovel:

Max. bead loosening opening width 17 in.

Shovel power 6,600 lbs. @ 140 psi

Machine weight: 560 lbs.

Max. space dimensions:

Width 43 in.

Height 72 in.

Depth 43 in.

Wheel specifications are based on nominal wheel sizes. Some dimensions,

capacities and

specifications may vary depending on tire and wheel

configurations and optional accessories used.

Specifi cations

Models:

TC3700 – Traditional center-clamp tire changer

TC3700SS – TC3700 with side shovel

TC3715 – TC3700 with press arm

TC3715SS – TC3700 with pres arm and side shovel

(W) Add W to the end of the model number to add Wheel lift

Because of continuing technological advancements,

specifications, models and options are subject to change

without notice.

For additional

information on

Hunter tire changer

accessories, see

Form 4042-T.

Clamping Adaptors

OPTIONAL

OPTIONAL