Hunter Engineering Quick Check System Specification Sheet B424 01 PNT Flush Brake Er Spec
2015-07-28
: Hunter-Engineering Hunter-Engineering-Quick-Check-System-Specification-Sheet-780044 hunter-engineering-quick-check-system-specification-sheet-780044 hunter-engineering pdf
Open the PDF directly: View PDF 
.
Page Count: 2
SPECIFICATIONS
Site Specications
Power Requirements Quick Check Console Supplied
Air Supply Req. (IS Units) 90-150 PSI (6.2-10.3 bar)
Min. Concrete Spec. 3 in. (76 mm) thick,
3000 PSI (20,700kPA) rating
Min. Grout Spec. .2 in. (5 mm) thick below plates
Max. Longitudinal Slope .25 in. per foot (6.4 mm per meter)
Max. Lateral Slope .0625 in. per foot (1.6 mm per meter)
Product Specications
Max. Wheel Weight 3500 lb. (1588 kg) per wheel
Brake Test Entry Speed 4 to 8 mph (7-13 km/h)
Maximum Wheel Base 165 in. (16764 mm)
Minumum Wheel Base 91 in. (9246 mm)
MODEL FEATURES / DIMENSIONS
Continued on Page 2
For inspection information visit:
www.hunter.com/inspection
For local contact visit:
www.hunter.com/company/ndrep.cfm
For general inquiries visit:
www.hunter.com or call 800 448-6848
Because of continuting technological advancements, specications,
models, and options are subject to change without notice.
Flush B424-01-PNT & B424IS-01-PNT
Brake Tester
B424IS-01-PNT
Brake Tester Dimensions
Flush Plates Length (L)246.5 in.
6261 mm
Width (W)87 in.
2210 mm
Inside Width (W1)39 in.
991 mm
Plates w/ Ination Station (W2)94 in.
2388 mm
Runway Width (R)24 in.
610 mm
Depth (D)2 in.
51 mm
Form 6668-T, 06-13
Copyright © 2013, Hunter Engineering Company
R
W
W1
D
W2
L
W1
SPECIFICATIONS
Form 6668-T, 06-13
Copyright © 2013, Hunter Engineering Company
Because of continuting technological advancements, specications,
models, and options are subject to change without notice.
Flush B424-01-PNT & B424IS-01-PNT
Brake Tester
