Hunter Engineering Quick Check System Specification Sheet QC51/QC52 Spec
2015-07-28
: Hunter-Engineering Hunter-Engineering-Quick-Check-System-Specification-Sheet-780045 hunter-engineering-quick-check-system-specification-sheet-780045 hunter-engineering pdf
Open the PDF directly: View PDF 
.
Page Count: 2
HARDWARE / SPECIFICATIONS / FEATURES
QC51 / QC52
Quick Check® System
HARDWARE
Power Requirements 115/230V, 15 amp*, 50/60 Hz, 1 ph †
Processor 3.06 Ghz Intel® Core™ i3
Memory 4 GB of DDR3 SDRAM
Hard Drive 120 GB Solid State Hard Drive (or greater)
DVD-RW/CD-RW Drive Standard
Monitor Class 24” Widescreen LCD
Wireless Network Module Yes - Standard
Operating System Windows® 7 - 64 Bit
Custom Drawer with Open Printer Standard
Printer HP Color Printer
Wireless Remote Standard
Power Line Filter Standard
Drive-on Camera Compatible Yes
PRODUCTIVITY TOOLS
Hunter QuickCheck® Software Standard
Vehicle Specications (30 plus years) Standard - 2 Years Free Updates
Real-Time Specs Delivered by Web WebSpecs®
VIN Barcode Reader Standard
HunterNet®3 Years Free Access for 1 User
QC Alignment Printout 3 Available Options
Continued on Reverse
Because of continuing technological advancements, specications, models and options are
subject to change without notice.
For aligner information visit:
www.hunter.com/inspection
For local contact visit:
www.hunter.com/company/ndrep.cfm
For general inquiries visit:
www.hunter.com or call 800-448-6848
SPECIFICATIONS
Metal on Metal Contact Non-Contact
Weight of Target 6 lbs (2.72 kg)
Prole of Target 9 in. (228.6 mm)
Installation Time 5 seconds
Wheel Assembly Range 40 in. (1016 mm)
Rolling Compensation Style Forward
Mobile Storage Carts 2
Camera Resolution 2,608 x 1,952
20,000,000 px
Recommended Bay Length 25 ft. (7620 mm)
OPTIONS / ACCESSORIES
Copyright © 2013-2015, Hunter Engineering Company
Form 6681-T, 03-14b
Supersedes Form 6681-T, 07-13
CodeLink® 2 w/o Pod
20-2813-1
Tread Depth Tool
20-2782-1*
XF-2 Pod
20-2072-1
Battery Tester
20-2781-3*
Accessory Bundle
20-2992-1
*20-2072-1 XF-2 Pod Required if kit 20-2785-1 or 20-2796-1 not purchased
*Amperage shown is minimal circuit rating † Isolated Ground Recommended
QC52
QC51
CONSOLE CONFIGURATIONS
QC51 QC51A QC51B QC52 QC52A QC52B
Battery Tester
20-2781-3
Tread Depth Tool
20-2782-1
CodeLink 2 w/ Pod
20-2785-1
Brake Plates
B424-01-PNT
Drive Thru Sensors
Drive Under Sensors
QC51 / QC52
Quick Check® System
Because of continuing technological advancements, specications,
models and options are subject to change without notice.
Copyright © 2013-2015, Hunter Engineering Company
Form 6681-T, 03-14b
Supersedes Form 6681-T, 07-13
D
H
W
H
D
W
QC51 - DRIVE THRU DIMENSIONS
QC52 - DRIVE UNDER DIMENSIONS
QC Drawer QC51
Width (W)22.50 in.
571.5 mm
132 in.
3353 mm
Height (H)20.25 in.
514.35 mm
50 in.
1270 mm
Depth (D)
23.25 in.
590.55 mm
37.25 in.
(fully extended)
946.15 mm
11 in.
279 mm
Sensor
Range
-
78 to 106 in.
1981 to 2692 mm
Shipping
Weight
44 lbs
20 kg
578 lbs
262 kg
QC Drawer QC52
Width (W)22.50 in.
571.5 mm
135 in.
3429 mm
Width (W)
(With Monitor Kit)
-135 in.
3429 mm
Height (H)20.25 in.
514.35 mm
15 in.
381 mm
Height (H)
(With Monitor Kit)
-18 in.
457 mm
Depth (D)
23.25 in.
590.55 mm
37.25 in.
(fully extended)
946.15 mm
15 in.
406 mm
Depth (D)
(With Monitor Kit) -
22 in.
559 mm
Sensor
Range
-
119 in.
3023 mm
Shipping
Weight
44 lbs
20kg
657 lbs
298 kg
H
D
W
QC51 systems offer a custom mounting option for customers unable to incorporate a
standard Quick Check console. Mounting components include monitor / keyboard panel,
drawer tray and drawer slides. QC51 systems Do Not include a cabinet. Components allow
for mounting in service writer’s desk, Shure® #791595 wall mounted cabinet and built in wall
mounted cabinets.
H
D
QC51 systems offer a custom mounting option for customers unable to incorporate a
standard Quick Check console. Mounting components include monitor / keyboard panel,
drawer tray and drawer slides. QC51 systems Do Not include a cabinet. Components allow
for mounting in service writer’s desk, Shure® #791595 wall mounted cabinet and built in
wall mounted cabinets.
W
W
H
D
It is recommended that a
low clearance warning be
suspended at the entrance
of Drive Under
Quick Check® bays.
