Hunter Engineering Winalign Hd Brochure Alignment Systems Fast And Accurate Wheel For Multi Axle Trucks
2015-07-28
: Hunter-Engineering Hunter-Engineering-Winalign-Hd-Brochure-780099 hunter-engineering-winalign-hd-brochure-780099 hunter-engineering pdf
Open the PDF directly: View PDF 
.
Page Count: 12
WinAlign
® HD Alignment Systems
Fast and accurate wheel alignment for multi-axle trucks
NEW!
New DSP760T alignment sensors
Fully Integrated AlignmentTruck Pusher
Rolling Compensation
Six Sensors Live
✔ Auto-locking
turnplates
✔ Built-in turnplate
bridges for rolling
comp
✔ Easily move vehicle
for rolling comp
✔ Rechargeable
battery
✔ Doubles as a wheel
chock
✔ No jacking required
✔ Compensate all
sensors at once
✔ Short roll comp
✔ Three axles live
✔ See all
measurements
at once
✔ Diagnose tire
wear conditions
✔ Reduce setup time through minimal sensor
movement
✔
✔
✔
Hunter's new DSP760T heavy-duty alignment
sensors reduce setup time and provide accurate
alignment readings.
Fully Integrated Alignment
Fully Integrated Alignment
Rolling Compensation
Rolling Compensation
Six Sensors Live
Six Sensors Live
Truck Pusher
Truck Pusher
Cordless Operation
✔ No cumbersome
cables
✔ Hot-swapable
batteries
Trailer Alignment
Self-Centering Adaptors
✔ High versatility for
trucks and buses
with low-hanging
bumpers or air dams
✔ Fits wheels 15
to 28 inches in
diameter
✔
Integrated
electronic
components
enhance reliability
✔ Lightweight,
rubberized design
✔ Impact-prone areas protected by integrated
rubber bumpers
✔
✔
Rugged
✔ Align without
unhooking from
tractor
✔
Align using optional
kingpin adaptor
without tractor
✔ Accurate to 600
inches
Cordless Operation
Cordless Operation
Self-Centering Adaptors
Self-Centering Adaptors
Trailer Alignment
Trailer Alignment
Standard procedures
✔ Position vehicle
✔ Select vehicle type
✔ Jack front axle
✔ Mount front sensors
✔ Compensate each sensor
✔ Pull turnplate pins
✔ Lower front axle
✔ Jack rear axle
✔ Mount rear sensors
✔ Compensate each sensor
✔ Lower rear axle
✔ Steer caster
✔ Jack middle axle
✔ Move fronts to middle
✔ Compensate each sensor
✔ Lower middle axle
✔ Print results
12:00-15:00 Total
sensor movements
axles jacked to compensate
total walking steps
additional minutes required
before adjustment
3
2
203
8+
ACTIVITY TRACKER
Previous setups used valuable shop time…
10 11 121 2 3 4 5 6 7 8 90
10
11
1
2
3
4
5
6
7
8
9
0
12
12
12:00+
…Today, present your results in just 4 minutes!
New procedure
✔ Position vehicle
✔ Select vehicle
✔ Mount sensors
✔ Roll forward to
compensate
✔ Steer caster
✔ Print results
4:00 Total
Fast printouts in 4 minutes!
Use detailed printouts featuring your
company’s logo to sell more work.
sensor movements
axles jacked to compensate
additional minutes required
before adjustment
total walking steps
0
0
8l
0
ACTIVITY TRACKER
1 2 3 40
1
2
3
0
4
4
4:00
Check tire wear angles in under 3 minutes!
Step-by-step procedure for HD alignment checks
1. Pull in vehicle 3. Mount six sensors2. Recall the specs
4. Roll vehicle forward 6. Sell the service5. Retrieve the printout
✔ Get measurements on three axles
✔ Toe and camber on front axle
✔ Thrust and scrub on rear axles
Use detailed printouts featuring your
company’s logo to sell more work
1 2 30
1
2
0
3
3
2:59
Accessories
Truck Pusher*
Hunter’s battery operated pusher easily moves
the vehicle for accurate rolling compensation.
(20-2855-1)
Remote indicator
Remote indicator is designed to provide the
operator with complete control while making
adjustments to the vehicle. (Cordless: 20-2882-1)
Turnplates
Optional HD PowerSlide turnplates automatically
lock and unlock and allow garages to align heavy-
duty vehicles on the floor or with a truck rack.
(Floor: 20-2876-1, Rack: 20-2875-1)
Trailer guage
Trailer alignment gauge tool mounts sensors to
the trailer kingpin. Trailer axles are adjusted to
centerline. (221-738-1)
Sensor storage options
Sensor storage post (left) or cart (right) provides
convenient access to alignment instruments when you
need them and convenient storage when you don’t.
(Post: 20-2886-1, Cart: 20-2850-1)
Self-centering wheel clamps
Standard wheel clamps allow clamping of wheels
15-28" in diameter.
Optional mini clamps allow for mounting sensor to
hub center of front rims (2 required) (175-284-1).
Rack turnplates are also available.
* Standard with WT400
When it comes to heavy-duty software,
WinAlign® HD is unmatched!
The importance of software…
The most extensive vehicle
information database.
Vehicle-specifi c procedures guide your
technicians with step-by-step instructions.
Patented power tools complete the
work accurately the fi rst time, every time.
WinAlign HD maximizes profi t and
productivity in your alignment bay.
WinAlign HD maximizes
profi t and productivity
Ordinary systems simply
present alignment readings
ExpressAlign®
Perform every alignment with a streamlined
procedure. ExpressAlign analyzes each job
and presents the optimal action sequence
with the minimum steps required.
Additional power features for light-vehicle work includes:
CAMM® feature • Tools and Kits database • Digital photos/videos* •
ExpressAlign® procedure • Shim Select® II feature • Work Management features
The importance of software…
60+ Axle confi gurations possible
WinAlign HD software supports more than 60
customized truck, trailer and bus alignment procedures
as well as passenger car and light truck alignment.
Automatic Bushing Calculator®
Calculate the proper bushing size and position
adjustment without wasting time with a zero
bushing. Eases the process of servicing Ford
F-150-450's.
Frame Offset Angle Display
Measure frame offset angle and calculate
adjustments to frame centerline, if a frame
reference alignment is needed.
Adjustment Videos
Strengthen technician competency and
extend profit opportunities with helpful
adjustment videos.
Before and after alignment results
can be printed in color.
Before and after alignment results
WinToe®
Ensure a straight steering wheel every time
without repeated adjustments or using a steering
wheel holder. Works with all vehicles on the road
today, from cars to Freightliners.
Rear Axle Adjustment Calculations
Cut adjustment times in half for rear axle
corrections. Graphics let you get it right
on the fi rst try.
DSP700T sensor features
Console confi gurations
WinAlign WT400
Premium
DSP760T
WinAlign WT300
Standard
DSP740T
Intel Core i3 Processor
3.06 GHz (or greater) ✔ ✔
4 GB of DDR3 SDRAM Memory ✔ ✔
120 GB SSD hard drive
(or greater) ✔ ✔
DVD-RW/CD-RW drive ✔ ✔
Windows® 7 operating system ✔ ✔
Car and light truck software* ✔ ✔
2 years of free VID updates ✔ ✔
2 years of free
HunterNet access ✔ ✔
Wireless network module ✔Optional
AlignGuide training ✔Optional
DSP760T support ✔Optional
Rolling compensation ✔Optional
Truck Pusher ✔Optional
Industry-leading hardware and software
Premium
Standard
DSP760T
DSP740T
Axles live 3 2
High-speed wireless communication ✔ ✔
Pro-Comp® continuous compensation ✔ ✔
Rolling compensation option** ✔ ✔
Level Reminder® on-screen leveling ✔ ✔
Sensor locking mechanism ✔ ✔
Interrupted measurement retention ✔ ✔
Light-weight construction ✔ ✔
* Car alignment sensors required.
** Requires WT400 console.
Return on investment
Ten-year return on a $49,000 investment
$4,777,250
$4,294,625
$3,812,000
$3,329,375
$2,846,750
$$2,364,125
$1,881,500
$1,398,875
$916,250
$433,625
10/day
9/day
8/day
7/day
6/day
5/day
4/day
3/day
2/day
1/day
Cash Investment - 1/day
Labor
$160,875
Equip.
$49,000
Net Profi t
$433,625
HD wheel alignment profitability
Alignments per period
Work week (days) 5.5
Alignment RO Total ($225 per align) $225
Cost of labor & parts -25%
Gross Profi t $168.75
Total investment (7 year depreciation) $49,000
Net Profi t $144.26
Cash Purchase
1 = 24 = 286 = 2,860
Per day Per month First year 10 year
$225 $5,358 $64,350 $643,500
-$56 -$1,340 -$16,088 -$160,875
$169 $4,019 $48,263 $482,625
-$24 -$583 -$7,000 -$49,000
$144 $3,435 $41,834 $433,625
340 14.3 1.2
days months years
Alignments per month to break even 3.5
Full Equipment Payback
Ten-year return on a $49,000 investment
Return on investment
HD Quick Check wheel alignment profitability
Copyright © 2014 Hunter Engineering Company
0814WAP5M.62
Form 995-T, 08/14
Supersedes 995-T, 01/14
www.hunter.com
Alignments per period
Work week (days) 5.5
Alignments per day (Core Business) 1
# Non Alignment Traffi c per day 10
# Trucks Needing Alignment: 70% (Ind. Avg.) 7
Add’l Alignments Sold: 25% (or more) +2
Total Alignments per day:
Alignment charge $ 225
Alignment add’l charges (Ind. Avg.) $ 0
Alignment RO Total $ 225
Cost of labor & parts -25%
Gross Profi t $ 168.75
Total investment (7 year depreciation) $ 49,000
Net Profi t $ 160.59
Cash Purchase
3 = 71 = 858 = 8,580
Per day Per month First year 10 year
$ 675 $ 16,075 $ 193,050 $ 1,930,500
$ 0 $ 0 $ 0 $ 0
$ 675 $ 16,075 $ 193,050 $ 1,930,500
-$ 169 -$ 4,019 -$ 48,263 -$ 482,625
$ 506 $ 12,056 $ 144,788 $ 1,447,875
-$ 24 -$ 583 -$ 7,000 -$ 49,000
$ 482 $ 11,473 $ 137,788 $ 1,398,875
102 4.3 0.4
days months years
Alignments per month to break even 3.5
Cash Investment - 3/day
Labor
$482,625
Equip.
$49,000
Net Profi t
$1,398,875
$ 4,777,250
$ 4,294,625
$ 3,812,000
$ 3,329,375
$ 2,846,750
$ 2,364,125
$ 1,881,500
$ 1,398,875
$ 916,250
$ 433,625
10/day
9/day
8/day
7/day
6/day
5/day
4/day
3/day
2/day
1/day
Full Equipment Payback
