Husqvarna 300D User Manual To The 62ec26bc 2209 4934 85fe 01407b1a226b

User Manual: Husqvarna 300D to the manual

Open the PDF directly: View PDF .
Page Count: 141 [warning: Documents this large are best viewed by clicking the View PDF Link!]

INSTRUCTION MANUAL

Thank you for purchasing a Canon product.

The EOS DIGITAL REBEL/EOS 300D DIGITAL is a high-performance,

digital AF SLR camera with an ultra-fine CMOS sensor with 6.30 million

effective pixels. It is full-featured for all types of shooting, from fully

automatic snapshooting to highly creative work. You can use all Canon

EF and EF-S lenses and start shooting quickly at any time in any

mode. Images can also be printed directly from the camera.

CompactFlash cards serve as the camera’s recording medium.

Be sure to read this Instruction Manual to familiarize yourself with the

features and proper operation of this camera.

Test the Camera Before Shooting

Before using the camera, be sure to test it first. Check that the images are

properly recorded on the CF card. If the camera or CF card is faulty and the

images cannot be recorded or read by a personal computer, Canon cannot be

held liable for any loss or inconvenience caused.

Copyrights

certain subjects for anything but private enjoyment. Shooting public performances

or exhibitions may also be prohibited.

•Canon and EOS are trademarks of Canon Inc.

•Adobe and Photoshop are trademarks of Adobe Systems Incorporated.

•CompactFlash is a trademark of SanDisk Corporation.

•Windows is a trademark or registered trademark of Microsoft Corporation of

the United States in the United States and other countries.

•Macintosh is a registered trademark of Apple Corporation in the United States

and other countries.

* This digital camera supports Exif 2.2 (also called “Exif Print”). Exif Print is a

standard for enhancing the communication between digital cameras and

printers. By connecting to an Exif Print-compliant printer, the camera’s image

data at the time of shooting is used and optimized, yielding extremely high

quality prints.

Be sure all the following equipment and accessories have been

included with your camera. If anything is missing, contact your dealer.

¢EOS DIGITAL REBEL/EOS 300D DIGITAL camera body (with Eyecup,

body cap and lithium backup battery for the date and time)

¢EF-S18-55mm f/3.5-5.6 (with lens cap and dust cap) * In optional lens kit.

¢Battery Pack BP-511 (includes protective cover)

¢Battery Charger CB-5L

¢Power cord for battery charger

¢Interface Cable IFC-300PCU

¢Video Cable VC-100

¢Neck Strap EW-100DB ll (with eyepiece cover)

¢EOS DIGITAL Solution Disk (CD-ROM)

¢Adobe Photoshop Elements Disk (CD-ROM)

¢Pocket Guide

Quick guide to using the camera.

¢EOS DIGITAL REBEL/EOS 300D DIGITAL Instructions (which you are

reading now)

¢Installing the Software Correctly

Explains the software installation and features.

¢EOS DIGITAL REBEL/EOS 300D DIGITAL Software Instructions

Explains the procedure for transferring images to a personal computer

and for RAW image processing.

¢Battery Pack BP-511 Instructions

¢Warranty card

∗Take care not to lose any of the above items.

∗No CF card is included. Please purchase it separately. CF cards made by

Canon are recommended.

Equipment Check List

Contents

Introduction

Equipment Check List .............. 3

Handling Precautions .............. 8

Nomenclature ........................ 10

Conventions Used

in this Manual ......................... 16

1Before You Start ............... 17

Recharging the Battery .......... 18

Installing and Removing

the Battery ............................. 20

Using a Household

Power Supply ......................... 22

Mounting and Detaching

a Lens .................................... 23

Installing and Removing

the CF Card ........................... 24

Basic Operation ..................... 26

Menu Operations ................... 28

Menu Settings .................... 30

LCD Monitor ....................... 31

Reverting to the

Default Settings .................. 31

Setting the Date

and Time ........................ 32

Replacing the Date/Time

Battery ................................... 33

Cleaning the Image

Sensor (CMOS) ............. 34

Dioptric Adjustment ............... 36

Holding the Camera ............... 36

Fully Automatic Shooting .....

YFully Automatic Shooting .. 38

Programmed Image

Control Modes ....................... 40

Reviewing Images ......... 42

Image Review ..................... 42

Changing the Review Time ...

qSelf-timer Operation .......... 44

KWireless Remote Control ..... 45

Using the Eyepiece Cover ..... 46

3Settings for Shooting ...... 47

Image-Recording

Quality ........................... 48

DSetting the ISO Speed .... 50

6Selecting the White

Balance ........................... 51

Custom White Balance .. 52

White Balance Auto

Bracketing ...................... 53

Selecting the Processing

Parameter ...................... 55

Setting Processing

Parameters .................... 56

File Numbering .............. 58

Setting Auto Rotation .... 59

4Checking Camera

Settings ........................ 60

4Advanced Operations ...... 61

3Selecting an AF Point ....... 62

When Autofocus Fails

(Manual Focusing) ................. 64

Contents

Drive Mode Selection ............ 65

TProgram AE ....................... 66

RShutter-Priority AE ........... 68

EAperture-Priority AE ........ 70

Depth-of-field Preview ........... 71

WManual Exposure .............. 72

QAutomatic

Depth-of-Field AE ........ 74

Setting Exposure

Compensation ....................... 75

Auto Exposure

Bracketing ..................... 76

jAE Lock ............................. 78

Bulb Exposures ..................... 79

Using the Built-in Flash .......... 80

Using Red-eye Reduction .. 82

jFE Lock .......................... 83

Metering Modes ..................... 84

0LCD Panel Illumination ..... 84

5Image Playback ................ 85

Image Playback ..................... 86

]Single image ................. 86

4Image with Shooting

Information ................ 86

ˆIndex Display ................. 88

7/ø Magnified View ......... 89

5Image Jump .............. 90

Automated Playback of

Images (Auto playback) ... 91

Rotating an Image ..... 92

Connecting to a TV ................ 93

Image Protection ........... 94

9Erasing an Image ............... 95

Formatting

the CF Card .................. 97

Direct Printing from the Camera

... 99

Connect the Camera

to the Printer ........................ 100

Printing ................................ 102

DPOF: Digital Print Order Format ...

109

Print Order ................... 110

Direct Printing with DPOF .... 116

8Reference ........................ 121

Function Availability Table .... 122

AF Modes and

Drive Modes ..................... 123

Troubleshooting Guide ......... 124

Error Codes ......................... 127

Major Accessories (optional) ...

128

System Map ......................... 130

Specifications ...................... 132

Index .................................... 138

Safety Warnings

Follow these safeguards and use the equipment properly to prevent injury, death, and

material damage.

Preventing Serious Injury or Death

•To prevent fire, excessive heat, chemical leakage, and explosions, follow the

safeguards below:

- Do not use any batteries, power sources, and accessories not specified in this

booklet. Do not use any home-made or modified batteries.

- Do not short-circuit, disassemble, or modify the battery pack or back-up battery. Do

not apply heat or apply solder to the battery pack or back-up battery. Do not expose

the battery pack or back-up battery to fire or water. And do not subject the battery

pack or back-up battery to strong physical shock.

- Do not install the battery pack or back-up battery in reversed polarity (+

–

). Do not

mix new and old or different types of batteries.

- Do not recharge the battery pack outside the allowable ambient temperature range

of 0˚C - 40˚C (32˚F - 104˚F). Also, do not exceed the recharging time.

- Do not insert any foreign metallic objects into the electrical contacts of the camera,

accessories, connecting cables, etc.

•Keep the back-up battery away from children. If a child swallows the battery, consult

a physician immediately. (Battery chemicals may harm the stomach and intestines.)

•When disposing of a battery pack or back-up battery, insulate the electrical contacts

with tape to prevent contact with other metallic objects or batteries. This is to prevent

fire or an explosion.

• If excessive heat, smoke, or fumes are emitted during battery pack recharging,

immediately unplug the battery charger from the power outlet to stop the recharging

and prevent a fire.

•If the battery pack or back-up battery leaks, changes color, deforms, or emits smoke

or fumes, remove it immediately. Be careful not to get burned in the process.

•Prevent any battery leakage from contacting your eyes, skin, and clothing. It can

cause blindness or skin problems. If the battery leakage contacts your eyes, skin, or

clothing, flush the affected area with lots of clean water without rubbing it. See a

physician immediately.

•During the recharging, keep the equipment away from the reach of children. The cord

can accidentally choke the child or give an electrical shock.

•Do not leave any cords near a heat source. It can deform the cord or melt the

insulation and cause a fire or electrical shock.

•Do not fire the flash at someone driving a car. It may cause an accident.

• Do not fire the flash near a person’s eyes. It may impair the person’s vision. When

using flash to photograph an infant, keep at least 1 meter away.

•Before storing the camera or accessory when not in use, remove the battery pack

and disconnect the power plug. This is to prevent electrical shock, heat generation,

and fire.

•Do not use the equipment where there is flammable gas. This is to prevent an

explosion or fire.

•If you drop the equipment and the casing breaks open to expose the internal parts,

do not touch the internal parts due to the possibility of electrical shock.

• Do not disassemble or modify the equipment. High-voltage internal parts can cause

electrical shock.

•Do not look at the sun or an extremely bright light source through the camera or lens.

Doing so may damage your vision.

•Keep the camera from the reach of small children. The neck strap can accidentally

choke the child.

• Do not store the equipment in dusty or humid places. This is to prevent fire and

electrical shock.

•Before using the camera inside an airplane or hospital, check if it is allowed.

Electromagnetic waves emitted by the camera may interfere with the plane’s

instruments or the hospital’s medical equipment.

•To prevent fire and electrical shock, follow the safeguards below:

- Always insert the power plug all the way in.

- Do not handle a power plug with wet hands.

- When unplugging a power plug, grasp and pull the plug instead of the cord.

- Do not scratch, cut, or excessively bend the cord or put a heavy object on the cord.

Also do not twist or tie the cords.

- Do not connect too many power plugs to the same power outlet.

- Do not use a cord whose insulation has been damaged.

•Occasionally unplug the power plug and use a dry cloth to clean off the dust around

the power outlet. If the surrounding is dusty, humid, or oily, the dust on the power

outlet may become moist and short-circuit the outlet to cause a fire.

Preventing Injury or Equipment Damage

•Do not leave equipment inside a car under the hot sun or near a heat source. The

equipment may become hot and cause skin burns.

• Do not carry the camera around while it is attached to a tripod. Doing so may cause

injury. Also make sure the tripod is sturdy enough to support the camera and lens.

•Do not leave a lens or lens-attached camera under the sun without the lens cap

attached. Otherwise, the lens may concentrate the sun’s rays and cause a fire.

• Do not cover or wrap the battery-recharging apparatus with a cloth. Doing so may

trap heat within and cause the casing to deform or catch fire.

• If you drop the camera in water or if water or metal fragments enter inside the

camera, promptly remove the battery pack and back-up battery. This is to prevent fire

and electrical shock.

• Do not use or leave the battery pack or back-up battery in a hot environment. Doing

so may cause battery leakage or a shorter battery life. The battery pack or back-up

battery can also become hot and cause skin burns.

•Do not use paint thinner, benzene, or other organic solvents to clean the equipment.

Doing so may cause fire or a health hazard.

If the product does not work properly or requires repair, contact

your dealer or your nearest Canon Service Center.

The Camera

•This camera is a precision instrument. Do not drop it or expose it to physical shock.

•

The camera is not waterproof and should not be used in wet conditions or underwater.

If the camera gets wet, take it to your nearest Canon dealer as soon as possible. If

small amounts of water splash onto the camera, wipe it with a clean dry cloth. If the

camera is exposed to salty air, wipe it thoroughly with a slightly damp cloth.

•Never leave the camera close to devices that generate strong magnetic fields, such

as magnets or electric motors. Do not operate or leave the camera in areas where

strong electromagnetic signals are generated, such as near electronic transmission

towers. Exposing the camera to strong electromagnetic signals can cause it to

malfunction and destroy recorded image data.

•Do not leave the camera in hot locations, such as in a car sitting in direct sunlight.

High temperatures can damage the camera.

•The camera contains precision circuits. Never attempt to disassemble the camera or

service it yourself.

•Use a commercially available blower brush to remove any dust that accumulates on

the camera lens, viewfinder, mirror, or focusing screen. Do not use cleaners that

contain organic solvents to wipe off the camera body or lens. If the camera is very

soiled, consult your nearest Canon dealer.

•Do not touch the camera’s electrical contacts with your hands. Doing so could

corrode the contacts and interfere with the camera’s normal operation.

•If the camera is suddenly brought in from the cold into a warm room, condensation

may form on the camera and internal parts. To prevent condensation, first put the

camera in a sealed plastic bag. Let the camera adjust to the warmer temperature

before taking it out of the bag.

•Do not use the camera if condensation forms on it, or you could damage it. If this

occurs, remove the lens, CF card and battery from the camera, and wait until the

condensation has evaporated before using the camera.

• If the camera will not be used for an extended period, remove its battery and store

the camera in a cool, dry, well-ventilated location. While the camera is in storage,

operate its shutter periodically to make sure that it is working.

• Avoid storing the camera in locations where potentially corrosive chemicals are

used, such as in a laboratory.

• If the camera has been in storage for an extended period, check its components

before using it. If you have not used the camera for some time or are planning to take

shots you will not want to lose (overseas vacation, etc.), have the camera checked

by your Canon dealer beforehand, or check for yourself that the camera components

are working properly.

LCD Panel and LCD Monitor

•The LCD monitor is manufactured with very high precision technology. However,

there may be a few dead pixels where a black or red pixel is always displayed. They

number no more than 0.01 percent of all effective pixels. They are not a malfunction

and do not affect the images recorded.

Handling Precautions

•Do not press hard on an LCD display or subject it to impacts, as this can cause

display flaws and damage.

•If an LCD display becomes soiled, clean it with a commercially available blower

brush, or wipe it with a soft cloth, taking care not to scratch the screen. If an LCD

display becomes extremely soiled, consult your nearest Canon dealer.

•By their nature, LCD displays react more slowly at low temperatures, and may

appear dark at high temperatures. The display will return to normal at room

temperature.

Lithium Battery for the Date and Time

•Store lithium batteries out of reach of small children. The chemicals in these

batteries are very dangerous if the battery is accidentally swallowed. If this happens,

seek medical attention at once.

•Do not use metal instruments such as pliers to hold the battery, or you could cause a

short circuit.

•Do not disassemble or heat the battery, or you could rupture it.

CF Card

•The CF card is a precision device. Do not drop CF cards or expose them to

vibrations. Doing so could lose the images recorded on them.

•Do not store or use CF cards near objects that generate magnetic fields, such as

TVs, speakers, or magnets, or in locations affected by static electricity. Doing so

could lose the images recorded on the CF card.

•Do not place CF cards in direct sunlight or close to heating appliances. Doing so can

distort the cards and make them unusable.

•Do not spill liquids onto CF cards.

•Always store your CF cards in a case or cabinet to protect the data stored on them.

•Non-Canon CF cards may not be able to record and playback images. If this

happens, use a CF card made by Canon.

•Do not bend CF cards, or subject them to strong impacts.

•Do not store CF cards in hot, dusty, or humid locations, or in locations exposed to

static electricity or magnetic fields.

Lens Electrical Contacts

After detaching the lens from the camera, attach the lens

caps or put down the lens with the rear end up to avoid

scratching the lens surface and electrical contacts.

Handling Precautions

Contacts

Reference page numbers are indicated by (p.∗∗).

Nomenclature

DIGITAL

terminal (p.100)

VIDEO OUT

terminal (p.93)

Remote control

terminal

(for Remote

Switch RS-60E3)

Hot shoe

EF lens mount index (p.23)

EF-S lens mount index

(p.23)

Grip

(

Battery

compartment

)

Remote control

sensor

DC coupler cord

hole (p.22)

Flash-sync contacts

Shutter button

(p.26)

Mode dial (p.14)

Lens lock pin

Lens mount

Contacts (p.9)

Depth-of-field

preview button

(p.71)

Built-in flash (p.80)

Red-eye

reduction

/Self-timer lamp

(p.82/44)

Strap mount

(p.17)

Lens release

button (p.23)

Mirror (p.34)

Drive mode selection

button (p.65)

〈M〉 Flash

button (p.83)

〈l〉 Main dial

(p.27)

EF-S18-55mm f/3.5-5.6 lens

Power switch (p.26)

Focus mode switch Lens mount index

Contacts (p.9)

Hood EW-60C

(optional) mount

58 mm filter

thread

(front of lens)

Focusing ring

Zoom ring

Nomenclature

Tr ipod socket

Battery compartment

cover (p.20)

Date/time battery

(in battery compartment)

(p.33)

Battery

compartment

cover release

lever (p.20)

Viewfinder eyepiece

Eyecup (p.46)

Dioptric adjustment knob (p.36)

Strap mount

(p.17)

Access

lamp (p.25)

CF card slot

cover (p.24)

CF card slot (p.24)

CF card eject button

(p.24)

LCD

monitor

(p.31)

〈

〉 AF point

selector / Enlarge

button (p.62/89,106)

〈

〉 AE lock /

FE lock button /

Index / Reduce button

(p.78/83/88/89,106)

〈m〉 Menu

button (p.28)

〈

〉 Info

button (p.60, 86)

〈

〉 Jump

button (p.90)

〈

]

〉

Playback

button (p.86)

〈

〉 Erase

button (p.95)

White balance button (p.51)

ISO speed set

button (p.50)

〈NO.〉 Body number

〈

〉 Setting button (p.28)

LCD panel (p.12)

〈

〉 LCD panel illumination button (p.84)

〈

∑

〉 Aperture value/Exposure

compensation button (p.72)

〈 〉 Cross keys (p.28)

The actual display will show only the applicable items.

LCD Panel

Nomenclature

Aperture value

AF point selection ( )

CF card full warning ( )

CF card error warning ( )

Error code

Cleaning image sensor ( )

Exposure level indicator

Exposure compensation amount

AEB level

CF card writing status

Drive mode

J Single

HContinuous

´ Self-timer/

Remote control

Image-Recording

quality

Large/Fine

Large/Normal

Medium/Fine

Medium/Normal

Small/Fine

Small/Normal

hRAW

Shots remaining

F Red-eye

reduction

G Beeper

D ISO speed

L AEB

White balance

ZAuto

CDaylight

XShade

VCloudy

BTungsten bulb

NWhite fluorescent light

MFlash

,Custom Battery level

w e r

Shutter speed

Busy ( )

Date/time battery

level warning ( )

ISO Speed

Camera starting ( )

Viewfinder Information

Nomenclature

AF point display indicator 〈.〉

AF points

〈 〉 High-speed sync

(FP flash)

Exposure level indicator

Exposure compensation

amount

AEB level

Red-eye reduction lamp-on

indicator

Focusing screen

Shutter speed

FE lock ( )

Busy ( )

Aperture value

CF card full warning ( )

CF card error warning ( )

〈

〉 AE lock / FE lock

AEB in progress

〈M〉 Flash-ready

Improper FE lock

warning

Maximum burst during

continuous shooting

〈n〉 Focus confirmation

light

1 Basic Zone

•All you do is press the

shutter button.

Y: Full Auto (p.38)

Allows you fully automatic

shooting—the camera

makes all the settings.

Image Zone

Allows you fully automatic

shooting in specific

situations.

U: Portrait (p.40)

I: Landscape (p.40)

O: Close-up (p.40)

P: Sports (p.41)

A: Night Portrait (p.41)

S: Flash off (p.41)

Mode Dial

The Mode Dial is divided into two functional zones.

2 Creative Zone

Lets you make a variety of

settings.

T: Program AE (p.66)

R: Shutter-priority AE

(p.68)

E: Aperture-priority AE

(p.70)

W: Manual exposure

(p.72)

Q: Automatic Depth-of-

field AE (p.74)

Nomenclature

Full Auto

Battery Charger CB-5L

This is a battery pack charger. (p.18)

AC Adaptor Kit ACK-E2 (optional)

Supplies power to the camera from a household power outlet. (p.22)

DC coupler socket

Power cord

DC coupler

side

Power cord

side

Battery pack slot

Power cord socket

AC Adaptor AC-E2

Nomenclature

DC coupler plug

DC coupler cord Power cord

DC coupler DR-400

Red lamp

•The camera control icons and markings in this booklet correspond to

the icons and markings on the camera.

•For more information, reference page numbers are provided in

parentheses (p.00).

•For explanatory purposes, the instructions show the camera

attached with an EF-S18-55mm f/3.5-5.6 lens.

•The menu descriptions assume that the default settings have been

set.

•The

label indicates the menu settings that can be changed.

•The icons (˜), (∫), and (√) indicate that the function

operates on a timer, and remains in effect after the button is

released. The icons represent 4, 6, or 16 seconds respectively.

•These Instructions use the following alert symbols:

: The Caution symbol indicates a warning to prevent shooting

problems.

: The Note symbol gives supplemental information.

Conventions Used in this Manual

•This icon <l> indicates the main dial.

•The <å> and <µ> icons indicate the cross

keys. The <ß>, <∂>, <ƒ>, and <©> icons

indicate the respective cross key (up, down, left,

and right).

•The icon indicates the SET button, used for

setting menu options.

Before You Start

This chapter explains a few preliminary steps and basic

camera operations.

Attaching the Strap

Pass the end of the strap through

the camera’s strap mount from the

bottom. Then pass it through the

strap’s buckle as shown in the

illustration. Pull the strap to make

sure it does not slip out of the

buckle.

•The eyepiece cover is also

attached to the strap. (p.46)

Eyepiece cover

Recharging the Battery

Recharge Level

0–50%

50–75%

75-90%

90% or higher

Red lamp

Blinks once per second

Blinks twice per second

Blinks three times per

second

Stays on

Connect the power cord.

•Connect the power cord to the charger.

•Connect the power plug to an AC

outlet.

Remove the cover.

•If you remove the battery from the

camera, be sure to reattach the cover

to protect against short circuit.

–

> mark Attach the battery.

•Align the battery’s top edge with the

–

> mark on the charger. While

pressing down the battery, slide it in

the direction of the arrow.

•To detach the battery, follow the above

procedure in reverse.

Recharge the battery.

sWhen the battery is attached to the

charger, recharging starts

automatically and the red lamp starts

blinking.

sA completely exhausted battery

takes about 90 minutes to almost

fully recharge.

* The numbers around red lamp and the

blinking frequency correspond to the table

above.

•Do not recharge any battery pack other than Battery Pack BP-511 or

BP-512.

• If the battery is left in the camera for a prolonged period without the

camera being used, a low electrical current may be discharged

excessively and the battery’s service life may be affected.

When not using the camera, remove the battery and attach the

protective cover to prevent shorting. Before using the camera again, be

sure to recharge the battery.

•After the red lamp lights, continue to recharge the battery for an

hour to attain a full charge.

•After recharging the battery, detach it and unplug the power cord from

the power outlet.

•The time required to recharge the battery depends on the ambient

temperature and battery’s power level.

•The battery pack can operate in temperatures from 0°C to 40°C (32°F to

104°F), however for full operating performance, use between 10°C

(50°F) and 30°C (86°F) is recommended. In cold locations such as ski

areas, battery performance is temporarily decreased and operating time

may be reduced.

•If operating time is sharply reduced even after charging normally, the

battery pack may have exceeded its useful life. Replace it with a new

battery pack.

Recharging the Battery

Load a fully charged BP-511 battery pack into the camera.

Battery Pack BP-512 can also be used.

The level of charge remaining is shown in three stages when the Power

switch is set to <1>. (p.26)

w: Charge is sufficient.

e: Charge is low.

r: Battery pack must be recharged.

Installing the Battery

Battery Level Icons

Open the battery compartment

cover.

•Slide the lever in the direction shown

by the arrow in the diagram, and open

the cover.

Insert the battery into the camera.

•Point the battery contacts downward.

•Insert the battery pack until it locks into

place.

Close the cover.

•Press the cover closed until it clicks

shut.

Installing and Removing the Battery

•The number of shots may be less than indicated in some cases, due to

differences in shooting conditions.

•The number of shots is reduced by frequent use of the LCD monitor.

•Holding the shutter button halfway down for long periods to use the AF

function without taking a shot can reduce the number of shots.

•The figures above are based on Canon’s standard testing conditions

(w/fully charged battery, EF-S18-55mm f/3.5-5.6 lens, image review

[ON], review time of [2 sec.], and image quality at [Large a]).

Battery Life

Temperature Shooting conditions

No flash use 50% flash use

Normal (20°C/68°F) Approx. 600 Approx. 400

Low (0°C/32°F) Approx. 450 Approx. 350

Removing the Battery

Installing and Removing the Battery

Open the battery compartment

cover.

•Slide the lever in the direction shown

by the arrow in the diagram, and open

the cover.

Remove the battery pack.

•Slide the battery lock lever in the

direction shown by the arrow, and

remove the battery.

(shots)

Using a Household Power Supply

With AC Adapter Kit ACK-E2 (optional), you can connect the camera to

a household power outlet and not worry about the battery becoming

exhausted.

Place the cord in the groove.

•Carefully insert the cord into the

groove without damaging it.

Insert the DC coupler into the

camera.

•Open the battery compartment cover

and open the DC Coupler cord notch

cover.

•Insert the DC Coupler until the lock

position and put the cord through the

notch.

•Close the cover.

Connect the DC Coupler.

•Connect the DC Coupler’s plug to the

AC adapter’s socket.

Connect the power cord.

•Connect the power cord to the AC

adapter.

•Plug the cord into a power outlet.

•When you are finished, remove the

plug from the power outlet.

Do not connect or disconnect the power cord while the camera's Power

switch is set to <1> .

Remove the caps.

•Remove the rear lens cap and the

body cap by turning them as shown by

the arrow.

Attach the lens.

•Align the EF-S lens with the camera’s

white EF-S lens mount index and turn

the lens as shown by the arrow until it

clicks in place.

•When attaching a lens other than an

EF-S lens, align the lens with the red

EF lens index mark.

While pressing the lens release

button, turn the lens as shown by

the arrow.

•Turn the lens until it stops, then detach

it.

Mounting a Lens

Detaching the Lens

Mounting and Detaching a Lens

The EF-S lens is dedicated to this camera. It cannot be attached to

other EOS cameras.

EF Lens mount index

EF-S Lens mount index

On the lens, set the focus mode

switch to < AF>.

•If the focus mode switch is set to

<MF>, autofocus will not operate.

Remove the front lens cap.

The captured image will be recorded onto the CF card (optional).

Either a Type I or Type II CF card can be inserted into the camera.

Number of remaining shots

The number of remaining shots depends on the remaining capacity of the

CF card and the ISO speed setting.

Installing a CF Card

Installing and Removing the CF Card

Open the cover.

•Slide the cover in the direction shown

by the arrow, and open it.

Insert the CF card.

•Using CF cards made by Canon is

recommended.

•With the CF card label side (the side

with the printed mark) facing toward

the rear of the camera, slide the card

in the direction of the mark, into the

slot.

sThe Eject button pops out.

Close the cover.

•Close the cover and slide it in the

direction shown by the arrow until it

clicks shut.

sWhen you set the Power switch to

<1>, the number of remaining shots

will be displayed on the LCD panel and

in the viewfinder.

mark

Eject button

Label side

•A blinking access lamp indicates that data is being read, written, or

erased on the CF card or that data is being transferred. To prevent

damage to the image data, CF card, or camera, never do the

following while the access lamp is blinking:

• Shake or hit the camera.

• Open the CF card slot cover.

• Remove the battery.

This is to prevent damage to the image data, CF card, or camera.

•The menu cannot be used during image processing after image capture

and while the image is being recorded onto the CF card (access lamp

blinks).

•If “ ”(Error CF) is displayed, see page 98.

•If you use a low-capacity CF card, it might not be able to record large

images.

•A microdrive is vulnerable to vibration and physical shock. If you use a

microdrive, be careful not to subject the camera to vibration or physical

shock especially while recording or displaying images.

Removing the CF Card

Installing and Removing the CF Card

Open the cover.

•Set the Power switch to <2>.

•Check that the “ ” message is not

shown on the LCD panel.

•Make sure the access lamp is off, and

open the cover.

Remove the CF card.

•Press the Eject button.

sThe CF card is ejected.

•Close the cover.

Access lamp

The camera operates only after the Power switch is set to <1>.

<1>:Set to this position when the

camera is in use.

<2>:The camera does not operate.

Set to this position when not

using the camera.

•To save battery power, the camera turns off automatically after 1 minute

of non-operation. To turn on the camera again, just press the shutter

button. You can change the auto power-off time with the menu’s [Auto

power off] setting (∆).

•Immediately after shooting, if you turn the Power switch to <2>, the

access lamp may continue blinking for a few seconds while the CF card

records the image.

After the image recorded to the CF card, the camera turns off automatically.

The shutter button has two stages. You can press it down halfway or

fully. The two levels of shutter button operation are as follows:

Halfway pressing

Pressing the shutter button down halfway

activates autofocusing (AF), and also

activates the automatic exposure (AE)

mechanism and sets the shutter speed

and aperture value.

The exposure (the combination of shutter

speed and aperture value) appears on the

LCD panel and in the viewfinder (˜).

Full pressing

This releases the shutter and shoots.

Power Switch

Shutter Button

Basic Operation

The <l> dial is for setting shooting settings and selecting and

setting menu items.

(1) Press a button and turn the

<l> dial.

When you press a button, its function

remains active while a timer (∫) runs.

During this time you can turn the <l>

dial and view the settings on the LCD

panel. When the timer runs out or you

press the shutter button down halfway,

the camera is ready to shoot.

•You can select the AF point or set the

ISO speed and white balance.

Operating the <l> Dial

(2) Just turn the <l> dial.

While referring to the LCD panel or

viewfinder display, turn the <l> dial to

set the desired setting.

•Use the dial this way to set the shutter

speed and aperture value.

•During image playback, you can turn

the dial to view the next or previous

image.

Using the Electronic Dials

•Camera movement during the moment of exposure is called camera

shake. Camera shake can cause blurred pictures. To prevent blurred

pictures due to camera shake:

·Hold the camera steady.

·Use your finger tip to touch the shutter button, grasp the camera with

your entire right hand, then press the shutter button gently.

•No matter what state the camera is in (image playback, menu operation,

image recording, etc., except during direct printing), pressing the shutter

button halfway will instantly make it ready for shooting.

Basic Operation

The on-screen menus enable you to set various settings such as the

image-recording quality, date and time, etc. Basically, you look at the

LCD monitor and use the <m> button, <5> button, Cross keys

<å> <µ>, and button to proceed to the next step.

<m> button

LCD monitor

<l> Main dial

button

Menu Operations

•Even while the menu is displayed, you can immediately go back to

shooting mode by pressing the shutter button halfway.

•When a Basic Zone mode is set, there are menu items which will not be

displayed (p.30).

•The explanation of menu functions hereinafter will assume that all the

menu items and settings are displayed.

•In some cases. the <l> dial can be used in place of the Cross keys.

<5> button

Cross keys < >

Ta b

Playback menu

Set-up 1 menu

Set-up 2 menuShooting menu

Menu items Menu settings

Setting Procedure

Exit the menu.

•Press the <m> button to exit.

Set the desired setting.

•Press the button. The initial

menu screen will reappear.

Select the menu setting.

•Use the <å> or <µ> keys to

select the desired setting. (Some

settings require one or the other pair of

keys.)

•You can also use the <l> dial to

select the desired setting.

Select a menu item.

•Press the <å> keys to select a menu

item, then press .

•You can also turn the <l> dial to

select a menu item.

•If you press the <5> button now,

another tab will be selected.

Select a tab.

•Press the <5> button to select a

tab.

•When a tab is highlighted, you can

also use the <µ> keys to select

another tab.

Display the menu.

•Press the <m> button to display

the menu. To turn off the menu, press

the button again.

Menu Operations

Quality Large a

Large s

Medium a

Medium s

Small a

Small s

RAW

Red-eye on/off Off

AEB

1/3-stop increments,

±2 stops

WB-BKT

whole-stop

increments, ±3 stops

Beep On

Off

Custom WB Manual setting of

white balance

Parameters Parameter 1

Parameter 2

Adobe RGB

Set 1

Set 2

Set 3

Set up

Languages provided:

English, German, French, Dutch,

Danish, Finnish, Italian, Norwegian,

Swedish, Spanish, Simplified Chinese,

Japanese

Menu Operations

Menu Settings

Protect Erase protection

Rotate Image rotation

Print Order Specifies images to

be printed

Auto Play Auto playback of

imagees

Review Off

On (Info)

Review time 2 sec.

4 sec.

8 sec.

Hold

Auto power off 1min.

2 min.

4 min.

8 min.

15 min.

30 min.

Off

Auto rotate On

Off

LCD Brightness 5 levels

Date/Time Date/time setting

File numbering Continuous

Auto reset

Format CF card Initializes and

erases card

Language 12 languages

Video system NTSC

PAL

Communication Normal

PTP

Clear all camera Resets camera

settings settings to defaults

Sensor clean. Enables sensor

cleaning

Firmware Ver. Displays version info

<˙> (Shooting)

<]> (Playback)

<∆> (Set-up 1)

<˚> (Set-up 2)

Shaded menu items are not displayed

in Basic Zone modes.

The color LCD monitor on the back of the camera enables you to

review and select recorded images and set various menu settings.

•The LCD monitor cannot be used as a viewfinder to shoot.

•The LCD monitor’s brightness can be adjusted with the menu’s [LCD

Brightness] setting (∆).

AF point selection

Drive mode

Exposure compensation

AEB

Automatic

Single

0 (Zero)

Canceled

Shooting Settings Image Recording Settings

Quality

ISO speed

White balance

WB-BKT

Parameters

Auto rotate

File numbering

da (Large/Fine)

100

Z (Auto)

Canceled

Parameter 1

Continuous

LCD Monitor

Reverting to the Default Settings

Select [Clear all camera settings].

•Select the [˚] tab.

•Press the <å> keys to select [Clear

all camera settings], then press

.

Clear the settings.

•Press the <©> key to select [OK], then

press . The camera settings will

then be reset to the default settings.

sThe camera’s default settings will be as

shown below.

Menu Operations

Setting the Date and Time

Set the date and time as shown below.

Select [Date/Time].

•Select the [∆] tab.

•Press the <å> keys to select [Date/

Time], then press .

sThe Date/Time setting screen will

appear.

Each captured image is recorded with the date and time it was taken. If the

date and time are not set, they cannot be recorded correctly. Make sure

you set the date and time correctly.

Set the date and time.

•Press the <å> keys to set the digits,

then press .

•The selection will then shift to the next

item.

Set the date display format.

•Press the <å> keys to set the

desired date format to [mm/dd/yy],

[dd/mm/yy], or [yy/mm/dd].

Press the button.

sThe date and time will be set and the

menu will reappear.

Replacing the Date/Time Battery

The date/time battery maintains the camera’s date and time. The

battery’s service life is about 5 years. When the date/time battery’s

power is low, “ ” will appear on the LCD panel. Replace the battery

with a new CR2016 lithium battery as described below.

The date/time setting will also be reset, so you must set the

correct date/time.

Set the Power switch to < 2>.

Open the cover and remove the

battery.

Take out the battery holder.

Replace the battery in the battery

holder.

•Be sure the battery’s orientation (+ –)

is correct.

Close the cover.

For the date/time battery, be sure to use a CR2016 lithium battery.

(+)

(–)

Cleaning the Image Sensor (CMOS)

The image sensor is like the film in a film-based camera. If any dust or

other foreign matter adheres to the image sensor, it may show up as a

dark speck in the images.

To avoid this, follow the procedure below to clean the image sensor.

Note that the image sensor is a very delicate component. If possible,

you should have it cleaned by a Canon Service Center.

While you clean the image sensor, the camera must be turned on. Use

the AC Adapter Kit ACK-E2 (optional accessory, see page 128) or a

battery. If you use a battery, make sure the battery level is sufficient.

Before cleaning the image sensor, detach the lens from the camera.

Insert the DC coupler (p.22) or a

fully charged battery into the

battery compartment and set the

Power switch to <1>.

Select [Sensor clean.].

•Select the [˚] tab.

•Press the <å> keys to select

[Sensor clean.], then press .

sIf you are using a battery with sufficient

power, the screen shown in step 3 will

appear.

•If the battery is exhausted, a warning

message will appear and you will not

be able to proceed further. Either

recharge the battery or use a DC

coupler and start from step 1 again.

Select [OK].

•Press the <µ> keys to select [OK],

then press .

sThe mirror will lock up and the shutter

will open.

s“” will blink on the LCD panel.

Clean the image sensor.

•Use a rubber blower to carefully blow

away any dust, etc., on the surface of

the image sensor.

Terminate the cleaning.

•Set the Power switch to <2>.

sThe camera will turn off and the shutter

will close. The mirror will also go down.

•Set the Power switch to <1>. You

can start shooting again.

Cleaning the Image sensor (CMOS)

•During the sensor cleaning, never do any of the following that

would turn off the power. If the power is cut off, the shutter will

close and it may damage the shutter curtains and image sensor.

• Do not turn the Power switch to <2>.

• Do not open the CF card slot cover.

• Do not remove the battery.

•Do not insert the blower tip inside the camera beyond the lens mount. If

the power goes out, the shutter will close and the shutter curtains and

image sensor may be damaged.

•Do not use a blower brush. The brush can scratch the CMOS sensor.

•Never use cleaning sprays or blower sprays. The pressure and freezing

action of the spray gas may damage the surface of the image sensor.

•When the battery is exhausted, the beeper will sound and the <π>

icon will blink on the LCD panel. Set the Power switch to <2> and

replace the battery. Then start from step 1 again.

Holding the Camera

By adjusting the diopter to suit your eyesight (with or without

eyeglasses), the viewfinder image will look clearer. The camera’s

adjustable dioptric range is –3 to +1 dpt.

Turn the dioptric adjustment

knob.

•Turn the knob left or right so that the

AF points in the viewfinder look sharp.

•The illustration shows the knob at the

standard setting (–1 dpt).

If the camera’s dioptric adjustment still cannot provide a clear viewfinder

image, using Dioptric Adjustment Lens E (10 types) is recommended.

To obtain sharp images, hold the camera still to minimize camera

shake.

Horizontal shooting Vertical shooting

•Firmly grasp the camera grip with your right hand, and press your

both elbows lightly against your body.

•Hold the lens at the bottom with your left hand.

•Press the camera against your face and look through the viewfinder.

•To maintain a stable stance, place one foot in front of the other

instead of lining up both feet.

Dioptric Adjustment

Fully Automatic

Shooting

This chapter describes how to use the camera’s Basic

Zone modes <Y> < O> <A>

<S> for quick and easy shooting. In these modes, all

you do is point and shoot. In addition, to help prevent

mistakes caused by operating the camera improperly,

the <6> <D> <j> < 3> buttons do not operate

so there is no need to worry about accidental errors.

Set the Mode Dial to <Y>

<O>

<A> or <S>.

•The shooting procedure is

the same as with the “Y Full

Automatic Shooting” on page

38.

Y Fully Automatic Shooting

All you do is point the camera and press the shutter button. Everything

is automatic so it is easy to photograph any subject. With seven AF

points to focus the subject, anyone can just point and shoot.

AF point

Turn the Mode dial to <Y>.

Aim any of the AF points on the

subject.

•The main subject, as determined by

the camera, will be focused by one of

the AF points.

Focus the subject.

•Press the shutter button halfway to

focus.

sWhen focus is achieved, the dot <.>

inside the active AF point will flash in

red, the beeper will sound, and the

focus confirmation light <n> on the

bottom right of the viewfinder will light.

Check the exposure setting.

sThe shutter speed and aperture value

will be set automatically and displayed

in the viewfinder and on the LCD

panel.

Aperture value

Shutter speed

Y Fully Automatic Shooting

Shoot.

•Compose the shot and press the

shutter button fully.

sThe captured image will be displayed

for about 2 sec. on the LCD monitor

(

•When focus is achieved, the autofocus and auto exposure setting will

also be locked.

•If the focus confirmation light <n> blinks, the picture cannot be taken.

(p.64)

•Out of the seven AF points, the one covering the closest subject is

selected automatically to achieve focus.

•The dot in multiple AF points may flash in red. This indicates that focus

has been achieved by all those AF points.

•In the Basic Zone modes (except , and <S> ), the built-in

flash will pop up and fire automatically in low-light or backlit conditions.

To retract the flash, push it back down.

•The focus-confirmation beeper can be silenced with the menu’s [Beep]

setting (˙).

•While focusing with <AF>, do not touch the focusing ring at the front of

the lens.

•If you want to zoom, do it before focusing. Turning the zoom ring after

achieving focus may throw off the focus.

•When the CF card becomes full, the CF Full warning “ ” will

appear on the LCD panel and shooting will be disabled. Replace the CF

card with one that is not full.

•If something obstructed the built-in flash from popping up, < >

will blink on the LCD panel. Fix this by setting the power switch to off

and on.

•Using a non-Canon EF lens with an EOS camera may not result in

proper camera or lens operation.

Programmed Image Control Modes

Select a shooting mode to suit the target subject, and the camera will

be set to obtain the best results.

For the functions available in the Basic Zone modes, see the “Function

Availability Table” (p.122).

This mode blurs the background to make

the human subject stand out.

•Holding down the shutter button executes

continuous shooting.

•To improve the background blur, use a telephoto

lens and fill the frame with the subject or have

the subject stand farther away from the

background.

This is for wide scenic views, night scenes,

etc.

•Using a wide-angle lens will further enhance

the depth and breadth of the image.

Use this mode to take close-up shots of

flowers, insects, etc.

•As much as possible, focus the subject at the

lens’ closest focusing distance.

•To obtain a larger magnification, use the

telephoto end of a zoom lens.

•For better close-ups, an EOS-dedicated macro

lens and Macro Ring Lite (both optional) are

recommended.

Portrait

Landscape

Close-up

Sports

This is for fast-moving subjects when you

want to freeze the action.

•The camera will first track the subject with the

center AF point. Focus tracking will then

continue with any of the seven AF points

covering the subject. When focus is achieved,

the beeper will sound softly.

•While you hold down the shutter button,

focusing will continue for continuous shooting.

You can disable the flash when you do not

want it to fire.

•The built-in flash or any external Speedlite will

not fire.

This mode is for images of people at twilight

or at night.The flash illuminates the subject

while a slow sync speed capture a natural-

looking exposure of the background.

•If you want to shoot only a night scene (without

people), use the mode instead.

•Tell the subject to keep still even after the flash

fires.

Programmed Image Control Modes

Night Portrait

Flash off

In the <A> mode, use a tripod to prevent camera shake. In the or

<S> mode, use a tripod if the shutter speed display blinks.

Reviewing Images

The image can be displayed on the LCD monitor immediately after you

shoot. You can set one of three image review options: [On] to display

the image, [On (Info)] to display both the image and shooting

information, and [Off] to not display the image.

Review [On] setting Review [On (Info)] setting (p.87)

Shooting

information

Histogram

Image Review

Select [Review].

•Select the <]> tab.

•Press the <å> keys to select

[Review], then press .

Set the Review setting.

•Press the <å> keys to select the

desired setting, then press .

Shoot.

sThe captured image will be displayed

on the LCD monitor.

For continuous shooting, the captured images will be displayed in

succession automatically after image processing.

You can set the image review time to [2 sec.], [4 sec.], [8 sec.], or

[Hold] which keeps the image displayed on the LCD monitor.

Reviewing Images

Changing the Review Time

Set the Review time setting.

•Press the <å> keys to select the

desired setting, then press .

Select [Review time].

•Select the <]> tab.

•Press the <å> keys to select

[Review time], then press .

•The [Hold] setting keeps displaying the image until you press the

shutter button halfway. However, if auto power off has been set, the

camera will turn off automatically after the auto power off time elapses.

•To delete the displayed image, press the <9> button and press the

<©> key to [OK]. Then press .

•To view images captured previously, see “Image Playback.” (p.85)

q Self-timer Operation

You can use self-timer in any Basic mode or Creative mode.

We recommend using a tripod when you use the self-timer.

Press the <H•´> button (∫).

•Press the <H•´> button so that

<´> appears on the LCD panel.

Focus the subject.

•The shooting procedure is the same as

for “Fully Automatic Shooting” (p.38).

•Look through the viewfinder and press

the shutter button completely.

sThe beeper will sound and the shot will

be taken 10 sec. later.

During the first 8 sec., the beeper

beeps slowly and the lamp blinks

slowly.

During the final 2 sec., the beeper

beeps quickly and the lamp stays lit.

During the self-timer operation, the LCD

panel counts down the seconds until

the image is captured.

Do not stand in front of the camera when you press the shutter button to

start the self-timer. Doing so prevents the camera from focusing on the

subject.

•To cancel the self-timer after it starts, press the < H•´> button.

•When using the self-timer to shoot only yourself, lock the focus (p.63) on

an object at about the same distance as where you will be.

K Wireless Remote Control

With the optional Remote Controller RC-5 (optional), you can shoot

remotely from up to about 5 meters/16.4 ft. in front of the camera.

Press the <H•´> button (∫).

•Press the <H•´> button so that

<´> appears on the LCD panel.

Shoot.

•Point the signal transmitter toward the

camera’s remote control sensor and

press the signal button.

sThe self-timer lamp will light and the

shot will be taken about 2 sec. later.

•The operation indicators during the 2

sec. will be the same as normal self-

timer operation.

•Remote control shooting cannot be done continuously.

After taking one shot, wait until the access lamp turns off before taking

another shot. The time required until you can take another shot will be

about 5-10 sec. at the <f> or <d> image quality and 10-20 sec. at the

<h> setting.

•Certain types of fluorescent light may cause camera misoperation.

During wireless remote control, try to keep the camera away from

fluorescent light.

Transmit button

Transmitter Battery holder lug

Battery holder

Remote control sensor

Using the Eyepiece Cover

During self-timer or remote control operation when your eye does not

cover the viewfinder eyepiece, stray light may enter the eyepiece and

affect the exposure when the image is captured. To prevent this, use

the eyepiece cover (attached to the neck strap) to cover the eyepiece.

Remove the eyecup.

•From the bottom of the eyecup, push it

upward.

Attach the eyepiece cover.

•Slide the eyepiece cover down into the

eyepiece groove to attach it.

Settings for Shooting

This chapter explains the settings for shooting digital

images: Image-recording quality, ISO speed, white

balance, processing parameters, file numbering, and

auto rotation.

For Basic Zone modes, only the image-recording quality

(except <h>), file numbering, auto rotation, and camera

setting checking will apply in this chapter.

Image-Recording Quality

The widely-used JPEG format is used for image-recording quality

settings other than <h>. Images captured in the <h> format

must later be processed by a personal computer.

For example, when [Large a] is selected, the LCD panel will display

<da>.

Select [Quality].

•Select the <˙> tab.

•Press the <å> keys to select

[Quality], then press .

Select the image-recording

quality.

•Press the <å> keys to select the

desired image-recording quality, then

press .

Image-recording Quality Settings

Large For A4-size (297 x 210 mm) prints. Records a large image

size (approx. 6.30 megapixels).

Medium

For A5 to A4-size prints. Records a medium-size image

(approx. 2.80 megapixels).

Small For A5-size (210 x 148 mm) or smaller prints. Records a

small image size (approx. 1.60 megapixels).

RAW For A4-size (297 x 210 mm) and larger prints. Records a

large image size (approx. 6.30 megapixels) without image

quality degradation.

•This format assumes that the image will be processed by a

personal computer. Special knowledge is required, but you can use

the bundled software to obtain the desired effect.

•RAW images cannot be printed directly from the camera.

•The <a> (Fine) and <s> (Normal) icons indicate the image’s compression

rate. For better image quality, select <a> for low compression. To save space

so you can record more images, select higher compression <s>.

•Processing is the adjustment (such as the white balance and contrast) of the

image from the RAW data.

Image File Size and CF Card Capacity According to

Image-Recording Quality

•The maximum capacity applies to a 128 MB CF card.

•The image size and CF card’s maximum capacity are based on

Canon’s testing standards (at ISO 100 with [Parameter 1] set). The

actual image file size and the CF card’s maximum capacity varies

depending on the subject, shooting mode, ISO speed, and

processing parameters.

•On the LCD panel, you can check how many more images the CF

card can record.

•In the <h> mode, a <fa> JPEG image is also recorded

simultaneously and embedded within the RAW image.

To extract the embedded JPEG image, use the dedicated software.

For details, see the software’s instructions.

•A different image-recording quality can be set separately for the

Basic Zone modes and Creative Zone modes.

Image-Recording

Quality

Image Size (Pixels)

3072 x 2048

(Approx. 6.3 million)

2048 x 1360

(Approx. 2.8 million)

1536 x 1024

(Approx. 1.6 million)

3072 x 2048

(Approx. 6.3 million)

Format

JPEG

3.1 MB

1.8 MB

1.4 MB

7 MB

38 images

65 images

66 images

88 images

16 images

1.2 MB 101 images

0.9 MB 132 images

Image File Size

(Approx.)

Max. Capacity

(Approx.)

RAW

JPEG

Image-Recording Quality

Setting the ISO Speed

The ISO speed is a numeric indication of the sensitivity to light. A

higher ISO speed number indicates a higher sensitivity to light.

Therefore, a high ISO speed is suited for moving subjects or shooting

in low-light conditions. However, the image will contain more noise to

make it look coarse or grainy. On the other hand, a low ISO speed will

make the image look finer, but it is not suited for freezing motion or

shooting in low light.

The ISO speed is set automatically within ISO 100-400. (ISO)

*Automatically set within ISO 100-400. ** For daytime backlit conditions,

ISO 100 is set.

ISO Speed in the Basic Zone Modes

YUIOPAS

Normal (No flash)

Auto*

100

Auto* Auto*

400

Auto* Auto*

With built-in flash 400** 100 400** 400**

With external Speedlite

100 100 100 100 400 100

ISO Speed in the Creative Zone Modes

Press the <D> (ß) button. (∫)

sThe current ISO speed will be

displayed on the LCD panel.

You can set the ISO speed to “ ”, “ ”, “ ”, “ ”, or “ ”.

Set the ISO speed.

•While looking at the LCD panel, turn

the <l> dial to set the desired ISO

speed.

•To return to shooting, press the shutter

button halfway.

•The higher the ISO speed and the higher the ambient temperature, the

more noise the image will contain and the larger the image file size will

be.

•High temperatures, high ISO speeds, or long exposures may cause

irregular colors in the image.

6 Selecting the White Balance

Normally, the <Z> setting will set the optimum white balance

automatically. If natural colors cannot be obtained with <Z>, you

can set the white balance manually to suit the respective light source.

In the Basic Zone modes, <Z> will be set automatically.

The three R (red), G (green), and B (blue) primary colors exist in varying

proportions in a light source depending on its color temperature. When the

color temperature is high, there is more blue. And when the color

temperature is low, there is more red.

To the human eye, a white object still looks white regardless of the type of

lighting. With a digital camera’s white balance setting, you can compensate

for the color temperature so that the colors in the image look more natural.

The subject’s white color is corrected and used as the basis for adjusting

the other colors. The camera’s <Z> feature uses the image sensor for

auto white balance.

Auto Daylight Shade Cloudy, twilight, sunset

Tungusten bulb

White fluorescent

light

FlashCustom

(p.52)

Press the <6> (∂) button. (∫)

Select the white balance setting.

•While looking at the LCD panel, turn

the <l> dial to select the desired

white balance setting.

•To return to shooting, press the shutter

button halfway.

White Balance

Custom White Balance

With custom white balance, you shoot a white object that will serve as

the standard for the white balance. By selecting this image, you import

its white balance data for the white balance setting.

Shoot a white object.

•The plain, white object should fill the

viewfinder center.

•Set the lens focus mode switch to

<MF>, then focus manually (p.64).

•Set any white balance setting. (p.51)

•Shoot the white object so that a

standard exposure is obtained. If it is

underexposed or overexposed, a

correct white balance setting might not

be obtained.

Select [Custom WB].

•Select the <˙> tab.

•Press the <å> keys to select

[Custom WB], then press .

Select an image.

•Press the <µ> keys to select the

image that was taken in step 1, then

press .

sThe image’s white balance data will be

imported.

•Press the <m> button to quit the

menu.

4Select [,].

•Press the <6> (∂) button. (∫)

•Turn the <l> dial to select <,>.

sThe custom white balance will be set.

White Balance Auto Bracketing

With just one shot, three images having a different color tone can be

recorded simultaneously. Based on the current white balance mode’s

standard color temperature, the white balance setting can be changed

from 0 to +/–3 stops in whole-stop increments. This is called white

balance bracketing. One stop is equivalent to 5 Mireds of a color

conversion filter used by film cameras.

Set the image-recording quality to

any setting except [RAW]. (p.48)

Select [WB-BKT].

•Select the <˙> tab.

•Press the <å> keys to select

[WB-BKT], then press .

Set the bracketing amount.

•Press the <µ> keys to select the

bracketing amount, then press .

sThe mark for the selected white

balance level will blink.

sThe number of remaining shots

displayed on the LCD panel will be

one-third the normal count.

Bracketing amount

Custom White Balance /

White Balance Auto Bracketing

•Follow steps 2 and 3 to set the

bracketing amount to < >,

then press .

•You can also set the Power switch to

<2> to cancel white balance

bracketing.

White Balance Auto Bracketing

•During continuous shooting, the number of images recorded will be

three times as many as the number of shots taken.

•Since three images are recorded for one shot, the CF card will take

longer to record the shot.

•White balance bracketing can be used together with auto exposure

bracketing (AEB). (p.76) In this case, the three AEB shots will have three

white balance bracketed images recorded for each shot. Therefore, a

total of nine images will be recorded on the CF card.

White balance bracketing will not work if the image-recording quality is

<h>.

Canceling White Balance Auto Bracketing

Shoot.

sThe bracketing sequence will start with

the standard color temperature

followed by a bluish tone (decreased

compensation) and reddish tone

(increased compensation).

Selecting the Processing Parameter

The image you capture can be processed to look more vivid or more

subdued. The processing parameters can be set according to the

preset Parameter 1, Parameter 2, and Adobe RGB. Or they can be set

to Set 1, 2, or 3 that you can set yourself.

Select [Parameters].

•Select the <˙> tab.

•Press the <å> keys to select

[Parameters], then press .

Select the processing parameter.

•Press the <å> keys to select the

desired parameter, then press .

(The respective settings are shown

below.)

Processing Parameters

* sRGB will be set as the color space for parameters other than Adobe RGB.

Parameter Description

Parameter 1 The image will have vivid and crisp colors. In the Basic

Zone modes, all images will be taken in this way.

Parameter 2 The colors will be more subdued compared to

Parameter 1.

This is mainly used for commercial printing.

Since the image will look very subdued, image

processing will be required. This setting is not

recommended for users who do not know about image

processing and Adobe RGB.

* The ICC profile is not appended. To convert the profile, you

must set Adobe RGB.

Set 1, 2, 3 First set the parameters with [Set up]. (p.56)

Setting Selects Set 1, 2, or 3.

Adobe RGB

Setting Processing Parameters

The image you capture can be processed automatically by the camera

in accordance with the parameter settings you set (five settings each

for [Contrast], [Sharpness], [Saturation], and [Color tone]). You can

Parameter

Contrast

Sharpness

Saturation

Color tone

Minus

Low contrast

Less sharp outline

Low saturation

Reddish skin tone

Plus

High contrast

Sharp outline

High saturation

Yellowish skin tone

Select [Set up].

•Press the <å> keys to select [Set

up], then press .

•The default parameter settings for [Set

1], [Set 2], and [Set 3] are all [0]

(Standard).

Select the Set No.

•Press the <å> keys to select [1], [2],

or [3], then press .

Select [Parameters].

•Select the <˙> tab.

•Press the <å> keys to select

[Parameters], then press .

Setting Processing Parameters

Select the parameter.

•Press the <å> keys to select the

parameter, then press .

Set the parameter.

• Press the <µ> keys to set the

parameter, then press .

Return to the [Parameters] menu.

•Press the <m> button twice to

return to step 1. Then press .

Select the desired Set Number.

•Press the <å> keys to select [Set 1],

[Set 2], or [Set 3], then press .

[Parameter 1] sets the contrast, sharpness, and color saturation by +1

stop. [Parameter 2] sets all the parameters to .

File Numbering

The images you take are automatically assigned a file number from

0001 to 9999 and saved in a folder (created automatically) that can

hold up to 100 images. The file number is akin to the frame number of

film images. The automatic file numbering method can be set to

[Continuous] or [Auto reset].

The file numbering continues in sequence even

after you replace the CF card. Since this

prevents any images from having the same file

number, it makes it easier to manage the

images with a personal computer.

Each time you replace the CF card, the file

numbering will be reset to the first file number

(XXX-0001). Since the file number starts from

0001 in each CF card, you can organize images

according to the CF card.

1Select [File numbering].

•Select the <∆> tab.

•Press the <å> keys to select [File

numbering], then press .

Select the file numbering method.

•Press the <å> keys to select

[Continuous] or [Auto reset], then

press .

Auto Reset

If folder No. 999 is created, [Folder number full] will appear on the LCD

monitor. Then if file No. 9999 is created, “ ” will be displayed on the

LCD panel and in the viewfinder. Replace the CF card with a new one.

Next sequential

file number

File numbering after

changing the CF card

XXX-0001

CF card-1

XXX-0002

CF card-2

File numbering after

changing the CF card

XXX-0001

CF card-1

XXX-0001

CF card-2

File number

is reset

Continuous Numbering

Setting Auto Rotation

Ver tical shots can be rotated automatically so that they are displayed

upright during playback.

Auto rotation will work only with vertical images captured while

[Auto rotate] was [On]. It will not work with vertical images

captured while [Auto rotate] was [Off].

Select [Auto rotate].

•Select the <∆> tab.

•Press the <å> keys to select

[Auto rotate], then press .

Set the Auto rotate setting.

•Press the <å> keys to select [On],

then press .

Take a vertical shot.

•For the image review right after image

capture, the image will not be

displayed vertically on the LCD

monitor.

Playback the image.

•Press the <]> button.

sThe vertical shot will be displayed

vertically as shown on the left.

If a vertical image is taken while the camera is pointed up or down, the

image might not rotate automatically for playback.

When you change the camera’s orientation between horizontal and

vertical, the camera orientation sensor will make a small sound. This is not

a defect.

INFO.

Checking Camera Settings

When the camera is ready to shoot, press the <4> button to view

the current camera settings on the LCD monitor.

Display the camera settings.

•Press the <4> button.

sThe current camera settings appear on

the LCD monitor.

•Press the <4> button again to

clear the LCD monitor.

Camera Setting Information

For viewing image with shooting information during playback, see “Image

with Shooting Information”. (p.86)

Date/time (p.32)

AEB amount (p.76)

WB-BKT amount (p.53)

Processing parameter setting (p.55)

Image review (p.42)

Image review time (p.43)

ISO speed (p.50)

Auto rotate (p.59)

Auto power off time (p.30)

CF card remaining capacity

Advanced Operations

With Creative Zone modes, you can set the desired

shutter speed or aperture value to obtain the exposure

you want. You take control of the camera.

•Depth-of-field preview,

exposure compensation, AEB,

AE lock, bulb, and white

balance bracketing are possible

only in Creative Zone modes.

Before starting, turn the power switch to <ON>.

3Selecting an AF Point

The AF point is used for focusing. The AF point can be selected

automatically by the camera or manually by you. In the Basic Zone

modes and <Q> mode, the AF point selection is automatic only. In

the <T>, <R>, <E>, and <W> modes, the AF point can be

selected either automatically or manually.

The camera selects the AF point automatically according to situation.

You can select any of the seven AF points manually. This is best when

you want to be sure to focus on a particular subject, or to use quick AF

function to help you compose a particular shot quickly.

Automatic AF point Selection

Manual AF point Selection

Press the <3> button. (∫)

sThe current AF point will light.

Select the desired AF point.

•Look at the AF point on the LCD panel

or in the viewfinder and turn the <l>

dial to select the desired AF point.

•After selecting the AF point, press the

shutter button halfway. The camera will

then be ready to shoot.

3Selecting an AF Point

After achieving focus, you can lock the focus on a subject and

recompose the shot. This is called “focus lock.”

Focus Lock

Automatic AF point Selection Manual AF point Selection

Set the camera to a Creative Zone mode.

•Set a Creative Zone mode except <Q>.

Select the desired AF point.

Aim the AF point over the subject and press the

shutter button halfway to focus.

Keep pressing the shutter button halfway and

recompose the image as desired.

Shoot.

Under low-light conditions, the built-in flash fires a brief burst of flashes

when you press the shutter button halfway. This is to illuminate the

subject to enable easier autofocusing.

AF-Assist beam with the Built-in Flash

•The AF-assist beam does not function in the , and <S>

modes.

•The built-in flash’s AF-assist beam is effective up to about 4 meters/13.2

feet.

•In the Creative Zone modes when the built-in flash is popped up with the

<M> button, the AF-assist beam may be emitted.

When Autofocus Fails (Manual Focusing)

Autofocus can fail to achieve focus (the focus confirmation light

<n>

blinks) with certain subjects such as the following:

(a) Low-contrast subjects (blue sky, solid-color walls, etc.).

(b) Subjects in low light.

etc.).

(d) Overlapping near and far objects (animal in a cage, etc.).

In such cases, do one of the following:

1. Focus an object at the same distance as the subject and lock the

focus before recomposing.

2. Set the lens focus mode switch to < MF > and focus manually.

Set the lens focus mode switch to

<MF>.

•

If you press the shutter button halfway during manual focusing, the active

AF point and the focus confirmation light <n> in the viewfinder will light

when focus is achieved.

•If focus cannot be achieved with an external Speedlite’s AF-assist beam,

select the center AF point. An off-center AF point may not be able to

achieve focus.

•<AF> stands for auto focus.

•<MF> stands for manual focus.

Manual Focusing

Focus on the subject.

•Focus by turning the lens focusing ring

until the subject is in focus in the

viewfinder.

Focusing ring

Drive Mode Selection

Press the <H•´> button. (∫)

sThe button toggles between the two

drive modes.

•The continuous drive mode can be

selected in the Creative Zone modes.

The drive mode can be set to single or continuous (2.5 frames per

sec.).

•During continuous shooting, the captured images are first stored in the

camera's internal memory and then successively transferred to the CF

card. When the internal memory becomes full during continuous

shooting, “ ” will be displayed on the LCD panel and in the

viewfinder and the camera cannot take any more shots.

As the captured images are transferred to the CF card, you will be able

to capture more images. Press the shutter button halfway to check in the

viewfinder the current remaining number of maximum burst ( to ) for

continuous shooting. The maximum burst number will not be displayed

when there is no CF card in the camera.

•If you press the shutter button halfway before all the images in the

internal memory are transferred to the CF card (while the access lamp

blinks), the image transfer to the CF card will stop temporarily.

•If “ ” is displayed in the viewfinder and on the LCD panel, wait

until the access lamp turns off, then replace the CF card.

•The number display “ ” - “ ” to the left of the focus confirmation light

> indicates the maximum number of continuous shots (maximum

burst) that can be taken.

•With white balance bracketing (p.53), the four shots can be taken

continuously.

J : Single

H: Continuous

´ : Self-timer/

Remote control

TProgram AE

Like <Y> (Full Auto) mode, this is a

general-purpose shooting mode. The

camera automatically sets the shutter

speed and aperture value to suit the

scene’s brightness. This is called Program

AE.

∗T stands for Program

∗AE stands for Auto Exposure

Set the Mode Dial to <T>.

Focus on the subject.

•Look through the viewfinder and aim

any AF point over the subject. Then

press the shutter button halfway.

Shoot.

•Compose the shot and press the

shutter button fully.

AF point

Shutter speed

Aperture value Check the display.

sThe shutter speed and aperture value

will be set automatically and displayed

in the viewfinder and on the LCD

panel.

•A correct exposure will be obtained as

long as the shutter speed and aperture

value display do not blink.

T Program AE

•Refer the “Function Availability Table” (p.122) for difference between

Creative Zone modes and Basic Zone modes.

Shifting the Program

•In Program AE mode, you can freely change the shutter speed and

aperture value combination (program) set by the camera while

maintaining the same exposure value. This is called shifting the

program.

•To do this, press the shutter button down halfway, then turn the <l>

dial until the shutter speed or aperture value you want is displayed.

•Program shift is canceled automatically after the image is captured.

•If you are using a flash, you cannot shift the program.

•If “ ” and the maximum aperture blink, it indicates

underexposure. Increase the ISO speed or use flash.

•If “ ” and the minimum aperture blink, it indicates

overexposure. Decrease the ISO speed or use an

ND filter to reduce the amount of light entering the

lens.

RShutter-Priority AE

n this mode, you set the shutter speed and the camera automatically

sets the aperture value to suit the brightness of the subject. This is called

Shutter-Priority AE.

A fast shutter speed can freeze the motion of a fast-moving subject and

a slow shutter speed can blur the subject to give the impression of

motion.

∗R stands for “time value.”

Set the Mode Dial to <R>.

Select the desired shutter speed.

•Look at the LCD panel and turn the

<l> dial to set the desired shutter

speed.

Focus on the subject.

•Press the shutter button down halfway.

sThe aperture value is determined

automatically.

Check the viewfinder display and

shoot.

•If the aperture value is not blinking, the

exposure is correct.

Fast shutter speed Slow shutter speed

• If the maximum aperture blinks, it indicates

underexposure. Turn the <l> dial to set a slower

shutter speed until the blinking stops. Or increase the

ISO speed.

•If the minimum aperture blinks, it indicates

overexposure. Turn the <l> dial to set a faster

shutter speed until the blinking stops. Or decrease

the ISO speed.

R Shutter-Priority AE

Shutter Speed Display

The shutter speeds from “ ” to “ ” indicate the denominator of the

fractional shutter speed. For example, “ ” indicates 1/125 sec. Also,

“” indicates 0.5 sec, and “ ” indicates 15 sec.

E Aperture-Priority AE

In this mode, you set the desired aperture value and the camera sets

the shutter speed automatically to suit the subject brightness.

The larger or brighter the aperture value (lower f/number) the more

blurred the background will become. This effect is ideal for portraits.

The smaller or darker the aperture value (higher f/number), the clearer

the focus will be for both near and far objects (wider depth of field).

∗E is an abbreviation for Aperture value.

Set the Mode Dial to <E>.

Select the desired aperture value.

•Look at the LCD panel and turn the

<l> dial to set the desired aperture

value.

Focus on the subject.

•Press the shutter button down halfway.

sThe shutter speed is determined

automatically.

Check the viewfinder display and

shoot.

•If the shutter speed is not blinking, the

exposure is correct.

With a large aperture value With a small aperture value

Depth-of-field Preview

Press the depth-of-field preview button to

stop down to the current aperture setting.

The diaphragm in the lens will be set to

the current aperture so you can check

the depth of field (range of acceptable

focus) through the viewfinder.

•This feature can be used in the Creative Zone.

•In the <Q> mode, press the shutter button halfway to focus, then

press the depth-of-field preview button while still pressing the shutter

button halfway.

•The exposure is locked (AE lock) while the Depth-of-Field Preview

button is pressed.

E Aperture-Priority AE / Depth-of-field Preview

•If the “ ” shutter speed blinks, it indicates

underexposure. Turn the <l> dial to set a larger

aperture value (smaller f/number) until the blinking

stops. Or increase the ISO speed.

•If the “ ” shutter speed blinks, it indicates

overexposure. Turn the <l> dial to set a smaller

aperture value (larger f/number) until the blinking

stops. Or decrease the ISO speed.

Aperture Value Display

The larger the f/number, the smaller the diaphragm will be. The aperture

display will differ depending on the lens. When no lens is attached to the

camera, “ ” will be display for the aperture value.

f Manual Exposure

In this mode, you set both the shutter

speed and aperture value as desired. To

determine the exposure, refer to the

exposure level indicator in the viewfinder

or use a handheld exposure meter. This

method is called manual exposure.

∗f stands for manual.

Select the desired shutter speed.

•Turn the <l> dial to set the desired

shutter speed.

Select the desired aperture value.

•Hold down the <∑> button and turn

the <l> dial to set the desired

aperture value.

Focus on the subject.

•Press the shutter button down halfway.

sThe exposure setting will be displayed.

•The exposure level icon <v> lets you

see how far you are from the standard

exposure level.

Set the Mode Dial to <f>.

Exposure level mark

Determine the exposure.

•Check the exposure level and set the

desired shutter speed and aperture

value.

Shoot.

f Manual Exposure

If the exposure level mark <v> blinks at the <z> or level, it

indicates that the difference between the standard exposure exceeds +/

–

stops.

Q Automatic Depth-of-Field AE

This mode is for obtaining a wide depth of field automatically between a

near subject and far subject. It is effective for group photos and

landscapes. The camera uses the seven AF points to detect the nearest

and farthest subjects to be in focus.

∗Q stands for Auto-depth of field.

Focus the subject.

•Move the AF point over the subject and

press the shutter button halfway. (˜)

•All the subjects covered by the AF

points which flashed in red will be in

focus.

Set the Mode Dial to <Q>.

Shoot.

•The <Q> mode cannot be used if the lens’ focus mode switch is set

to <MF>.

•If the “ ” shutter speed blinks, it indicates underexposure. Increase

the ISO speed.

•If the “ ” shutter speed blinks, it indicates overexposure. Decrease

the ISO speed.

•If the aperture value blinks, it indicates that the exposure level is correct

but the desired depth of field cannot be achieved. Either use a wide-

angle lens or move further away from the subjects.

•

In this shooting mode, you cannot freely change the shutter speed and

aperture value. If the camera sets a slow shutter speed, hold the camera

steady or use a tripod.

•If you use a flash, the result will be the same as using <T> (Program

AE) mode with flash.

Set the exposure compensation

amount.

•Hold down the <∑> button and turn

the <l> dial to set the desired

exposure compensation amount.

•To cancel the exposure compensation,

set the exposure compensation

amount to < >.

Setting Exposure Compensation

Exposure compensation is used to alter the camera’s standard

exposure setting. You can make the image look lighter (increased

exposure) or darker (decreased exposure). The exposure

compensation amount can be set up to +/–2 stops in 1/3-stop

increments.

Turn the Mode Dial to any Creative

Zone mode except <f>.

Check the exposure setting.

•Press the shutter button halfway and

check the display.

Shoot.

Standard exposure index

Exposure level mark

Decreased

exposure

Increased

exposure

•The exposure compensation amount will remain in effect even after you

turn the Power switch to <2>.

•When the Mode Dial is set to a Basic Zone mode, the exposure

compensation will be canceled automatically.

•If the standard exposure setting is 1/125 sec. and f/5.6, setting the

exposure compensation amount to plus or minus one stop will be the

same as setting the shutter speed or aperture value as follows:

Shutter speed

Aperture value

–1 stop ←0→+1 stop

250 ←125 →60

8.0 ←5.6 →4.0

Auto Exposure Bracketing

With auto exposure bracketing (AEB), the camera automatically

changes the exposure level up to +/

–

2 stops in 1/3-stop increments for

three successive shots.

Standard exposure Decreased exposure Increased exposure

Set the AEB amount.

•Press the <µ> keys to set the

desired AEB amount, then press

.

sThe <L> and AEB level will appear

on the LCD panel.

Select [AEB].

•Select the <˙> tab.

•Press the <å> keys to select [AEB],

then press .

Shoot.

sThe three bracketed shots will be

exposed in the following sequence:

standard exposure, decreased

exposure, and increased exposure.

sAs shown on the left, the respective

bracketing amount will be displayed as

each bracketed shot is taken.

sThe current drive mode will be used for

the bracketing.

standard exposure

decreased exposure

increased exposure

AEB range

•Follow steps 1 and 2 to set the AEB

amount to < >.

•AEB will also be canceled

automatically if you turn the Power

switch to < 2>, change lenses, have

flash-ready, replace the battery, or

replace the CF card.

Canceling AEB

Neither flash nor bulb exposures can be used in AEB mode.

•If the drive mode is set to continuous, the three bracketed shots will be

taken continuously and then the shooting will stop. If the drive mode is

set to single image, you must press the shutter button three times.

•If the self-timer/remote control has been set, the three bracketed shots

will be taken continuously.

•AEB can be combined with exposure compensation.

Auto Exposure Bracketing

jAE Lock

AE lock enables you to lock the exposure at a different place from the

point of focus. After locking the exposure, you can recompose the shot

while maintaining the desired exposure level. This feature is useful for

backlit and spotlighted subjects.

In Creative Zone modes, partial metering will be used automatically for

AE lock.

Focus the subject.

sThe exposure setting will be displayed

in the viewfinder.

Press the <j> button. (˜)

sThe <j> icon will light in the

viewfinder to indicate that the exposure

setting has been locked (AE lock).

•Aim the center of the viewfinder over

the subject where the exposure is to be

locked, then press the <j> button.

•Each time you press the <j> button,

it locks the current exposure setting.

Compose the shot and shoot.

•If you want to maintain the AE lock

while taking more shots, hold down the

<j> button and press the shutter

button to take another shot.

AE lock indicator

Bulb Exposures

When bulb is set, the shutter is open during the time you keep pressing

the shutter button fully. Bulb is useful when a long exposure is

necessary for capturing night scenes, fireworks, the night sky, etc.

Set the Mode Dial to <W>.

Set the shutter speed to “ ”.

•Look at the LCD panel and turn the

<l> dial to select “ ”.

•The next setting after “ ” is “ ”.

Set the aperture value.

•Hold down the <∑> button and turn

the <l> dial to set the desired

aperture value.

Shoot.

•Press and hold the shutter button down

fully.

•Exposure continues as long as you

hold down the shutter button.

∗The LCD panel will display the

elapsed exposure time (sec.).

Since bulb exposures will have more noise than usual, the image will look

rough or grainy.

•For bulb exposures, using Remote Switch RS-60E3 (optional) is

recommended.

•Remote Controller RC-5 (optional) can also be used for bulb exposures.

When you press the transmit button, the exposure will start 2 sec. later.

To stop the exposure, press the button again.

•With a fully-charged battery, a single bulb exposure can be as long as

about 2.5 hours.

Using the Built-in Flash

In the Basic Zone modes (except < S>), the built-in

flash pops up and fires automatically in low-light and backlit conditions.

TSelect <T> mode for full autoflash.

The shutter speed and aperture value are determined

automatically, just as in <Y> (Full Auto) mode.

Select <R> mode to manually set a shutter speed slower than

1/200 second.

The camera then automatically sets the flash aperture value to

provide the proper exposure for your shutter speed.

ESelect <E> mode to manually set the aperture value.

Against dark backgrounds such as the night sky, slow-sync

shooting will be set so that both the subject and background

are exposed correctly. The main subject is captured by the

flash, and the background is captured by long exposure using

a slow shutter speed.

• Because automatic slow-sync shooting uses a slow shutter

speed, always use a tripod.

Select <W> mode to set the shutter speed and the aperture

value manually.

The main subject is exposed properly by the flash. The

background exposure varies according to the shutter speed

and aperture settings.

QThe effect is the same as using flash in < T> mode.

Using the Built-in Flash in the Basic Zone

Using the Built-in Flash in the Creative Zone

When using a Creative Zone mode, press the <M> button to pop up the

built-in flash.

Built-in Flash Range

(using EF-S18-55mm f/3.5-5.6 lens)

Flash Sync Speed and Aperture Settings

Using the Built-in Flash

ISO Speed Wide-angle: 18 mm Telephoto: 55 mm

100 Approx. 0.7-3.7 m (2.3-12.1 ft) Approx. 0.7-2.3 m (2.3-7.5 ft)

200 Approx. 0.7-5.3 m (2.3-17.4 ft) Approx. 0.7-3.3 m (2.3-10.8 ft)

400 Approx. 0.7-7.4 m (2.3-24.3 ft) Approx. 0.7-4.6 m (2.3-15.1 ft)

800 Approx. 0.7-10.5 m (2.3-34.5 ft) Approx. 0.7-6.6 m (2.3-21.6 ft)

1600 Approx. 0.7-14.9 m (2.3-48.9 ft) Approx. 0.7-9.2 m (2.3-30.2 ft)

Mode Shutter speed setting Aperture setting

TAuto (1/60 to 1/200 sec.) Auto

RManual (30 to 1/200 sec.) Auto

EAuto (30 to 1/200 sec.) Manual

WManual (Bulb to 1/200 sec.) Manual

QAuto (1/60 to 1/200 sec.) Auto

•When using an external Speedlite, use an EX-series Speedlite. The

flash cannot be fired with an EZ-, E-, EG-, ML-, or TL-series

Speedlite set in the TTL or A-TTL autoflash mode. Use the

Speedlite’s manual flash mode instead if provided.

•When using an EX-series Speedlite, press the built-in flash back into the

camera before mounting the external flash.

•Use the built-in flash at least 1 m/3.3 ft away from the subject. Closer

distances will have the flash partially obstructed.

•When using the built-in flash, detach any hood attahed to the lens. A

lens hood will partially obstruct the flash coverage.

•When a super telephoto lens or fast, large-aperture lens is attached, the

built-in flash coverage might be obstructed.

•The built-in flash’s coverage is effective with lens focal lengths as short

as 18mm.

Using the Built-in Flash

When flash is used in a low-light environment, the subject’s eyes may

come out red in the image. “Red eye” happens when the light from the

flash reflects off the retina of the eyes. The camera’s red-eye reduction

feature turns on the red-eye reduction lamp to shine a gentle light into

the subject’s eyes to narrow the pupil diameter or iris. A smaller pupil

reduces the chances of red eye from occurring. Red-eye reduction can

be set in any shooting mode except <S>.

Select [Red-eye on/off].

•Select the <˙> tab.

•Press the <å> keys to select [Red-

eye on/off], then press .

Set the red-eye reduction.

•Press the <å> keys to select [On],

then press .

Using Red-eye Reduction

•When you press the shutter button

down halfway, the red-eye reduction

lamp indicator appears in the

viewfinder.

•Red-eye reduction will not work unless the subject

looks at the red-eye reduction lamp. Tell the subject

to watch the lamp.

•To increase the effectiveness of red-eye reduction,

press the shutter button down fully after the red-

eye reduction lamp (which lights for approximately

1.5 seconds) indicator goes off.

•You can shoot anytime by pressing the shutter button down fully, even if

the red-eye reduction lamp is on.

•The effectiveness of red-eye reduction varies from subject to subject.

•Red-eye reduction is more effective in bright interior locations, with the

camera closer to the subject.

Red-eye reduction

lamp indicator

Using the Built-in Flash

FE (flash exposure) lock obtains and locks the correct flash exposure

reading for any part of a subject. It works in Creative Zone modes.

j FE Lock

Focus on the subject.

•Press the shutter button halfway. Keep

pressing the shutter button halfway

until step 4.

Check that the <M> icon is lit.

•Press the <M> button to pop-up the

built-in flash.

•In the viewfinder, check that the <M>

icon is lit.

Press the <j> button. (√)

•Aim the viewfinder center over the

subject where you want to lock the

flash exposure, then press the <j>

button.

sA preflash will fire and the <j> icon

will light in the viewfinder.

• Hold down the <j> button.

Shoot.

•Compose the shot and press the

shutter button fully.

If the subject is too far away and beyond the effective range of the flash,

the <M> icon will blink. Get closer to the subject and repeat steps 2 to 4.

0LCD Panel Illumination

To illuminate the LCD panel, press the

<0> button. To turn off the illumination,

press the button again. The illumination

will turn off when you press the shutter

button halfway.

Metering Modes

The camera has three metering modes: Evaluative, partial, and

centerweighted average metering.

Evaluative metering

This is the camera’s standard metering mode suited

for most subjects even under backlit conditions.

After detecting the main subject’s position,

brightness, background, front and back lighting

conditions, camera orientation (horizontal or

vertical), etc., the camera sets the proper exposure.

Partial metering

This is set automatically during AE lock in the

Creative Zone modes.

This is particularly effective when the background is

much brighter than the subject due to backlighting,

etc. This method uses a center area of

approximately 9% of the screen.

• The area covered by partial metering is shown on

the left.

Centerweighted average metering

This is set automatically in the <W> mode.

The metering is weighted at the center and then

averaged for the entire scene.

Image Playback

This chapter explains how to view and erase images

and how to connect the camera to a TV monitor.

Images not taken with the camera:

The camera might not be able to properly display images

captured with a different camera or edited with a personal

computer for image processing or changing the file name.

Image Playback

You can select any image to view. You can view a single image, the

image information, an index display, or a magnified view.

Press the <4> button.

•As with the single image display mode

explained above, you can use the

cross keys to view another image.

•Pressing the <4> button toggles

between the single image display and

image with shooting information

display.

While an image is displayed on the LCD monitor, press the <4>

button to display the image’s shooting information.

] Single image

Playback the image.

•Press the <]> button.

sThe last captured image will appear on

the LCD monitor.

View another image.

•Press the <ƒ> key to view images

starting with the newest one.

•Press the <©> key to view images

starting with the oldest one.

•To quit the playback, press the <]>

button. The LCD monitor will turn off.

In any image display mode, you can turn the <l> dial to view another

image.

4 Image with Shooting Information

Histogram

A histogram is a graph indicating the image’s

brightness. The horizontal axis indicates the

brightness level (darker on the left and brighter

on the right), while the vertical axis indicates how

many pixels exist for each brightness level.

The more pixels there are toward the left, the

darker the image. And the more pixels there are

toward the right, the brighter the image.

If there are too many pixels on the left, the

shadow portions will lose detail. And if there are

too many pixels on the right, the highlights will be

washed out. The tones in-between will be

reproduced.

By checking the image and its histogram, you can

see the exposure level pattern and the overall

tone reproduction condition.

Highlight Alert

When the image information is displayed, any overexposed areas of

the image will blink. To obtain more image detail in the overexposed

areas, set the exposure compensation to a negative amount and shoot

again.

Image Playback

Sample Histogram

Dark image

Normal image

Bright image

Image

Flash exposure

compensation amount

Exposure compensation amount

Aperture value

Shutter speed

Images recorded /

Total images recorded

Image-recording quality

Image protect

File No.

Histogram

Audio note

(The camera has no sound

recording feature.)

Metering mode

Shooting mode

ISO speed

WB-BKT

Shooting time

White balance

Shooting date

Image Information

Image Playback

ˆ Index Display

While the index is displayed, press the <5> button and press

the <µ> keys to jump nine images ahead or back. (p.90)

Nine thumbnail images are displayed on one screen.

Display the index.

•Press the <8> button.

sThe selected thumbnail will be

highlighted with a green border.

Set the camera to the playback

mode.

•Press the <]> button.

sThe last captured image will appear on

the LCD monitor.

Select an image.

• Press the cross keys to move the

green frame in the respective direction.

Switching from the index display to another display mode

•To display a single image, press the <]> button.

•To display the image with shooting information, press the <4>

button.

•Pressing the <7> button switches to the single image displaay and

pressing it again switches to magnified view.

The selected image can be magnified by 1.5x to 10x on the LCD

monitor.

Display the image to be

magnified.

•Display the image in the single-image

or image information display mode.

Image Playback

7/ø Magnified View

Scroll around.

•Press the cross keys to scroll around in

the respective direction.

•To quit the magnified display, press the

<]> button.

Magnify the image.

•Press the <7> button.

sThe center of the image will be

magnified.

•To increase the magnification, hold

down the <7> button.

•Press the <8> button to reduce

the magnification. Hold down the

button to continue reducing the

magnification until it reaches the size

in step 1.

While in the magnified view, you can maintain the same

magnified position and magnification when you turn the <l>

dial to view another image.

Magnified portion

While single image, image with shooting information, index, or

magnified image is displayed, you can jump images ahead or back.

Image Playback

5 Image Jump

Jump bar

Set the camera for playback.

•Display a single image, image with

shooting information, index, or

magnified image.

Set jump display.

•Press the <5> button.

sThe jump bar will appear at the bottom

of the screen.

Image jump is also possible during [image protection] and [image

rotation].

Jumping in the single-image, image information, and magnified

view modes:

Press the <ƒ> key to jump ten images backward, or press the <©>

key to jump ten images forward. In the magnified view, the magnified

position and magnification will be maintained during the image jump.

Jumping in the index display mode:

Press the <ƒ> key to jump nine images backward, or press the

<©> key to jump nine images forward.

Jump forward or back.

•Press the <µ> keys. In the

magnified view, turn the <l> dial.

•To quit the image jump, press the

<5> button. The jump bar will

disappear.

This function automatically and continuously displays all images

recorded on the CF card. Each image is displayed for approximately 3

seconds.

Image Playback

Automated Playback of Images (Auto playback)

Start the auto play.

•Press .

sAfter [Loading image...] is displayed

for a few seconds, auto play will start.

•To pause the auto play, press .

•During pause, [ ] will be displayed on

the upper left of the image. Press

again to resume the auto play.

Select [Auto Play].

•Select the <]> tab.

•Press the <å> keys to select [Auto

Play].

Stop the auto play.

•Press the <m> button to stop the

auto play and return to the menu

screen.

•During auto play, auto power off will not work.

•The display time may vary depending on the image.

•If you press the <4> button during auto play, the image information

will be displayed for the auto play. To return to the single-image display,

press the <4> button again.

•During auto play pause, you can press the <µ> keys to display

another image.

The Rotate function can rotate an image 90° or 270˚ clockwise. This

allows you to display images with the correct orientation.

Image Playback

Rotating an Image

Select [Rotate].

•Select the <]> tab.

•Press the <å> keys to select

[Rotate], then press .

sThe image rotation screen will appear.

Rotate the image.

•Press the <µ> keys to select the

image to be rotated, then press .

sEach time you press , the image

will rotate clockwise.

•To rotate another image, repeat step

•To quit the image rotation, press the

<m> button. The menu will

reappear.

•If you have set [Auto rotate] to [On] (p.59) before taking the vertical

shots, you need not rotate the image as described above.

•Image rotation is also possible in the image information, magnified view,

and index display modes.

Connecting to a TV

By connecting the camera to a TV set with the video cable (provided),

you can view the recorded images on a TV set. Always turn off the

camera and the television before connecting or disconnecting them.

Be sure the camera is set to the video system format (NTSC or PAL)

compatible with the TV set. If necessary, set the menu’s [Video

system] setting to [NTSC] or [PAL]. If the proper video system format

is not set, the image will not be displayed properly.

Connect the camera to the TV.

•Open the camera’s terminal cover.

•Use the video cable (provided) to

connect the camera’s <∑> terminal

to the TV monitor’s VIDEO IN terminal.

•Insert the cable plug all the way in.

Turn the TV on, and set the input

switch to Video In.

Turn the camera’s power switch to

<1>.

Press the <]> button.

sThe image will appear on the TV set.

(The camera’s LCD monitor will not

display anything.)

•When you finish, set the Power switch

to <22

2>, turn the TV off, then

disconnect the video cable.

•While looking at the TV monitor, you can view images and set the menu

settings as you can with the LCD monitor.

•Depending on the TV monitor, the image periphery may not appear.

Video input terminal

Image Protection

You can protect images to prevent accidental erasure.

Select [Protect].

•Select the <]> tab.

•Press the <å> keys to select

[Protect], then press .

sThe protect setting screen will appear.

Set the image protection.

•Press the <µ> keys to select the

image to be protected, then press

.

sWhen an image is protected, the <¬>

icon will appear below the image.

•To cancel the image protection, press

again. The <¬> icon will

disappear.

•To protect another image, repeat step

•To quit the image protection, press the

<m> button. The menu will

reappear.

Image protection icon

•Once an image is protected, it cannot be removed by the camera’s

Erase function.

To erase a protected image, you must first remove the protection.

•If you erase all the images (p.96), only the protected images will

remain. This is convenient when you want to erase unnecessary

images all at once.

•Image protection can also be set in the image information, magnified

view, and index display modes.

9 Erasing an Image

You can erase images individually or erase all the images at one time

in the CF card. Only protected images will not be erased.

Once an image is erased, it cannot be recovered. So be

careful when erasing an image. To prevent important images

from being erased accidentally, protect it.

Erasing a Single Image

Set the playback mode and select

the image to be erased.

•Press the <]> button.

•Press the <µ> keys to select the

image to be erased.

Display the erase menu.

•Press the <9> button.

sThe erase menu will appear at the

bottom of the screen.

Erase the image.

•Press the <µ> keys to select

[Erase], then press .

sThe access lamp will blink and the

image will be erased.

•To erase another image, select the

image to be erased and repeat steps 2

and 3.

Set the camera for playback.

•Press the <]> button.

Select [All...].

•Press the <µ> keys to select [All...],

then press .

sThe confirmation dialog will appear.

Erase the images.

•Press the <µ> keys to select [OK],

then press .

sAll unprotected images will be erased.

•While the images are being erased,

you can cancel the erasure by pressing

the button.

9 Erasing an Image

Erasing All Images

Once an image is erased, it cannot be recovered. Make sure you no

longer need the image before erasing it.

Display the erase menu.

•Press the <9> button.

sThe erase menu will appear at the

bottom of the screen.

Formatting the CF Card

Format the CF card before using it in the camera.

Select [Format].

•Select the <∆> tab.

•Press the <å> keys to select

[Format], then press .

sThe confirmation dialog will appear.

Format the CF card.

•Press the <µ> keys to select [OK],

then press .

sThe CF card will be formatted

(initialized).

sWhen the CF card formatting is

completed, the menu will reappear.

Formatting a CF card will erase everything in the card including

protected images. Before formatting a card, make sure there is

nothing you need to retain. If necessary, transfer the images to a

personal computer before formatting the card.

•A non-Canon CF card or a CF card formatted with another camera or

personal computer might not work with the camera. In such a case,

format the CF card with the camera first. Then it might work with the

camera.

•The CF card’s capacity displayed on the formatting screen may be lower

than the capacity indicated on the card.

About the “ ” Error Message

If “ ” (CF error) is displayed on the LCD panel, it indicates a

problem with the CF card that is preventing the image data from being

recorded or read. Use another CF card instead.

Or, if you have a commercially-available CF card reader that can read the

CF card, use it to transfer the images in the card to a personal computer.

After transferring and saving all the images to a personal computer, format

the card. The card might then work properly.

Formatting the CF Card

Direct Printing

from the Camera

By using the dedicated cable to connect the camera to

a Canon printer (optional) compatible with direct

printing, you can easily print images directly from the

camera. The direct printing operation is all done with

the camera.

100

Connect the Camera to the Printer

Turn the Power switch to <2>.

Turn on the printer.

•Certain printers may turn on when the

power cable is connected.

Connect the camera to the printer.

•For information on which cable to use

and how to connect it to the printer,

refer to the printer’s instruction booklet.

•When connecting the cable plug to the

camera’s <œ> terminal, the

cable plug’s <∂> icon must face the

front side of the camera.

Set up the printer.

•For details, refer to the printer’s

manual.

101

Turn the camera’s power switch to

<1>, then press the <]>

button.

sThe image will be displayed, and the

<å> or <ß> icon will appear on the

upper left.

Indicates that a card photo

printer is connected. BJ printer-connected icon

Direct Printing

•For direct printing, using AC Adapter Kit ACK-E2 (optional) to power the

camera is recommended.

•If a battery pack will be used to power the camera, be sure to fully

recharge it first. While printing, monitor the battery level.

•Before disconnecting the cable from the camera’s <œ> terminal,

turn off both the camera and printer. Then grasp and pull the connector

(not the cord) to disconnect it.

•Do not use any cable other than the dedicated interface cable to

connect the camera and printer.

If the camera is connected to the printer and you do not operate it for

approx. 6 minutes, the camera power will turn off automatically. However, if

the auto power off (p.30) time is longer than 8 minutes, then that setting will

take effect instead.

102

Printing

You can specify the printing style (borders on/off, date on/off, etc.), print

quantity, and image trimming.

You do all the printing operations with the camera.

Images in the h format cannot be printed directly from the

camera.

Select the image to be printed.

•Check that the <å> or <ß> icon is

displayed on the upper left of the LCD

monitor.

•Press the <µ> keys to select the

image to be printed.

Press .

sThe print setting screen will appear.

Connected printer icon

Print setting screen

Tr imming frame: Appears when you want to trim the image.

The printing style settings will be

displayed.

<˙> is the date icon.

Sets the printing style.

Sets the trimming area.

Starts the printing.

Returns to step

You can also press the <m> button

to return to step

Sets the quantity to be printed.

103

Select [Style].

•Set the desired settings for [Borders],

[Date], and the BJ printer’s paper size.

•For the setting procedure, see “Setting

the Printing Style” on the next page.

Printing

Print the image.

•Press the <å> keys to select

[PRINT], then press .

sPrinting will start.

•When the printing is completed

properly, the screen returns to step 1.

104

Printing

Setting the Printing Style

Select [Style].

•Press the <å> keys to select [Style],

then press .

sThe [Style] setting menu will appear.

•With BJ printers, [Paper] must be set to the paper size used.

•With card photo printers, [Image] will appear instead of [Paper].

With the [Image] setting, you can print one image on one sheet or

eight identical, smaller images on one sheet. This can be selected

when postcard-size paper is used.

• [Borders] and [Date] can be set in the same way with all printers.

BJ printer Card photo printer

Style setting screen

Select the style option.

•Press the <å> keys to select the

option, then press .

sThe available settings will be

displayed.

105

Printing

[Paper]

(BJ printer)

[Image]

(Card photo printer)

[Borders][Date]

Select the desired setting.

•Press the <å> keys to select the

desired setting, then press .

sThe selected setting will take effect.

•When you are done, press the <m>

to return to the print setting screen.

If you set “Bordered,” certain printers may print the date on the border. The

date may be hard to see on a light background or on the border.

•If [Date] is [On], the date recorded for the image will appear on the print.

•The date will appear on the lower right of the image.

•If you use a card photo printer and selected [Multiple], you will not be

able to set [Borders] and [Date]. The print will be borderless without any

date imprinted. The image will also be trimmed on all sides.

106

Setting the Quantity

Printing

Set the number of copies.

•Press the <å> keys to select

[copies].

•Press the <µ> keys to set the

number of copies.

•Set a number from 1 to 99.

You can trim the image and print only the trimmed portion.

Before starting, you must first set the [Style] settings. If you change the

[Style]/[Borders] after setting the trimming, the trimming setting will be

lost.

Setting the Trimming

Trim the image.

•The image area within the trimming

frame will be printed.

Select [Trimming].

•Press the <å> keys to select

[Trimming], then press .

sThe trimming screen will appear.

Changing the trimming frame size

Press the <7> or <8> button to change the size of the

trimming frame.

Moving the trimming frame

Press the cross keys to move the trimming frame in the respective

direction.

107

Printing

Rotating the trimming frame

Press the <4> button to rotate the trimming frame. The button

toggles between the vertical and horizontal image orientation.

For example, a horizontal shot can be printed as a vertical shot.

Exit the trimming.

•Press to return to the print

setting screen.

•The operation guide disappears while

you trim the image. It will reappear

after 5 sec. of idle time.

•If [Borderless] is set, certain printers might not print the trimmed image

correctly.

•The smaller the trimming frame, the rougher the image quality will be. If

you use a card photo printer and the image quality would look rough due

to trimming, the trimming frame will turn red.

•If you set [Trimming] and then change the [Style]/[Borders] setting, the

[Readjust trimming] message will appear. Set [Trimming] again or

change back the [Borders] setting. Otherwise, the trimming will not take

effect for the printed image.

•When setting the [Trimming], look at the camera’s LCD monitor. If you

look at a TV monitor (p.93) while trimming the image, the trimming frame

may not appear correctly.

The [Trimming] setting will be canceled after the printing is completed or if

you execute [Cancel].

108

Printing

While [Stop] is displayed on the

LCD monitor, press .

sThe printing will stop.

sIf the confirmation dialog appears,

press the <µ> keys to [OK], then

press .

Stopping the Printing

When Stopping the Printing

With a card photo printer:

If only one print is being printed, you cannot stop the printing. If multiple

prints are being printed, the printing will stop after the current print is

finished printing.

With a BJ printer:

The printing will stop and the paper being printed will be discharged.

Resolving Printing Errors

If an error occurs during printing, an error message will appear on the LCD

monitor.

•If [Resume] is displayed, correct the error, then select [Resume] and

press . After you press and “Stop printing?” appears, select

[Cancel] and press . The printing will resume. With certain

printers, the printing may resume automatically.

•If only [Stop] is displayed, press . After correcting the problem,

start over again to print.

109

DPOF: Digital Print

Order Format

With DPOF (Digital Print Order Format), you can specify

which images in the CF card are to be printed and the

quantity. This feature is very convenient when you make

prints with a DPOF-compatible printer or photo lab.

DPOF

DPOF (Digital Print Order Format) is a standard for digital

cameras to record the image selections, quantity of prints, and

other print settings on a CF card or other recording media.

Print settings with a DPOF-compatible digital camera enable

the following:

•By fitting a CF card into a printer

compatible with DPOF, you can make

prints as specified.

•When ordering prints from a photo lab, you do not need to

fill in any order form to specify the image selections,

quantity, etc.

•Printers capable of direct printing

from the camera can print the

images as specified by DPOF.

*The camera uses DPOF Version 1.1.

110

Print Order

First you set the printing options and select the images to be printed.

The printing options give you a choice of making an index print

(multiple, thumbnail images on one print), inserting the date, and

inserting the image file No. The printing options will apply to all the

images selected for printing. (They cannot be set differently for each

image.)

For printing, you can either select images individually or select all the

images.

If you select individual images first and then select all the images,

the image selection will be set to [All].

h images cannot be selected for printing.

Printing Options

Set the print type, date, and file No. options.

Select [Print Order].

•Select the <]> tab.

•Press the <å> keys to select [Print

Order], then press .

sThe print order screen will appear.

Select [Set up].

•Press the <µ> keys to select [Set

up], then press .

sThe set up screen will appear.

Off

Type

˚ Standard

¬ Index

˚¬ Both

Date

Prints one image on the paper.

Multiple, thumbnail images are printed on the paper.

Prints both the standard and index prints.

File No.

[On] imprints the recorded date on the print.

[On] imprints the file No. on the print.

111

Print Order

Select the set up option.

•Press the <å> keys to select the

option, then press .

sThe set up screen will appear.

[Print Type][Date]

[File No.]

Select the desired setting.

•Press the <å> keys to select the

desired setting, then press .

Exit the set up screen.

•Press the <m> button. The print

order screen will reappear.

•Next, select [Order] or [All] to select

the images to be printed (p.113).

112

Print Order

•Even if [Date] and [File No.] are set to [On], the date or file No. might

not be imprinted depending on the print type setting and printer type.

(See the table below.)

* With BJ printers, the date and file No. will not be imprinted.

•With [Index] prints, both the [Date] and [File No.] cannot be set to [On]

at the same time. Also, the [Date] will not be imprinted even if it is [On].

Only the [File No.] can be set to [On] and imprinted.

•When printing with DPOF, you must use the CF card whose Print Order

specifications have been set. DPOF will not work with any images which

were removed from the CF card without DPOF specification.

•Depending on the DPOF-compatible printer and photo lab, certain

DPOF specifications might not come out in the final prints. For details,

refer to your printer’s instructions or consult your photo lab.

•Do not set DPOF specifications in a CF card containing images taken

with a different camera. Doing so may overwrite any existing DPOF

specifications. Also, certain types of images might not be compatible

with DPOF.

Date

Ye s

Standard

Index*

Both Standard

Index*

File No.

Ye s

Print Type

113

Print Order

Select [Order].

•Press the <µ> keys to select

[Order], then press .

sThe order screen will appear.

Select the image to be printed.

•Press the <µ> keys to select the

desired image.

•Press the <8> button to see a

three-image view. To return to the

single-image view, press the <7>

button.

Three-image view

When the print type is [Standard] or [Both], you can set the number of

copies to be printed for each standard-type print. If [Index] is set, you

can either include or not include the image to the index print.

Selecting Individual Images

114

Set the print settings.

•The settings will be different depending

on the [Print Type] explained in

“Printing Options” on page 110.

Press the <å> keys to set the number

of copies from 1 to 99.

If you want to include the image to the

index print, press the <å> keys to

checkmark the index print checkbox on

the upper left. Or leave it unchecked if

you do not want to include the image to

the index print.

•To select another image, repeat steps

3 and 4.

Print Order

Exit the Order screen.

•Press the <m> button to return to

the Print Order screen.

Press the <m> button again to

save the settings to the CF card and

return to the main menu.

Indication when [Standard]

and [Both] are set.

Indication when [Index] is

set.

115

Print Order

Select [All].

•Press the <µ> keys to select [All],

then press .

sThe All screen will appear.

You can select all the images in the CF card (except

images) for

printing or cancel the [All] selection. For standard-type prints, only a

single print will be available for each image.

Selecting All Images

Exit the Print Order screen.

•On the Print Order screen, press the

<m> button to save the settings to

the CF card. The screen will then

return to the main menu.

Select [Mark all].

•Press the <å> keys to select [Mark

all], then press .

One print each will be specified for all the

images, then the print order screen will

reappear.

•If you select [Clear all], all the images

selected for printing will be deselected.

•If you select [Cancel], the print order

screen will reappear.

•The printing will start with the oldest image.

•Up to 998 images can be selected for printing.

116

Direct Printing with DPOF

With a printer (Optional) compatible with direct printing, you can print

according to the DPOF settings.

Connect the camera to the printer.

(p.100)

Set the printing style.

q Press the <å> keys to select

[Style], then press . The [Style]

screen will then appear.

w Press the <å> keys to select an

option, then press . The available

settings will then appear.

* The options displayed will differ depending

on the type of print and printer. Options

that cannot be set will be dimmed.

e Press the <å> keys to select the

desired setting, then press . The

setting will then take effect.

r Press the <m> button to exit the

print style screen.

•If you are using a BJ printer, be sure to

specify the paper size.

Printing style settings

Select [Print Order].

•Select the <]> tab.

•Press the <å> keys to select [Print

Order], then press .

Select [Print].

•Press the <å> keys to select [Print],

then press .

•[Print] will be displayed only if the

camera is connected to the printer and

printing is possible.

117

Start printing.

•Check the printing options displayed

on the upper left.

•Press the <å> keys to select [OK],

then press .

sThe printing will start.

•When the printing ends, the screen will

return to step 3.

Print Order settings

Direct Printing with DPOF

•If [Print Type] is set to [Index], the number of thumbnail images that can

be printed on the paper depends on the paper size:

Credit card-size paper: 20 images, L size: 42, and postcard size: 63.

As for the number of thumbnail images with a BJ printer, refer to the

printer’s instruction booklet.

•On standard prints, the date is imprinted on the lower right. On index

prints, the file No. is imprinted on the lower center.

If you set “Bordered,” certain printers may print the date on the border. The

date may be hard to see on a light background or on the border.

118

While [Stop] is displayed on the

LCD monitor, press .

sThe printing will stop.

sWhen the confirmation dialog appears,

press the <µ> keys to select [OK],

then press .

Direct Printing with DPOF

Stopping the Printing

With a card photo printer:

If only one print is being printed, the printing cannot be stopped. If two or

more prints are being printed, the printing will stop with the next print.

With BJ printers:

The printing will stop and the paper being printed will be discharged.

Resuming the Printing

•On the direct printing screen, after printing is stopped, press the <å>

keys to select [Resume], then press .

•Printing cannot be resumed in the following cases:

•Before resuming the printing, you changed the printing options.

•Before resuming the printing, you erased an image that was to be

printed.

•When you stopped the printing, CF card’s remaining capacity was

low.

Resolving Printing Errors

If an error occurs during printing, an error message will appear on the LCD

monitor.

•If [Resume] is displayed, correct the error, then select [Resume] and

press . After you press and “Stop printing?” appears, select

[Cancel] and press . The printing will resume. With certain

printers, the printing may resume automatically.

•If only [Stop] is displayed, press . After correcting the problem,

start over again to print.

119

MEMO

120

MEMO

121

Reference

This section will help you understand your camera

better. It covers basic shooting concepts, camera

specifications, system accessories, and other reference

information.

122

Function Availability Table

JPEG

RAW

Auto

Manual

Auto WB

Preset WB

Custom WB

WB-BKT

point

selection

Drive

White

balance

Metering

mode

Exposure Built-in

flash

Quality

ISO

speed

Parameters

Mode Dial

Basic Zone Creative Zone

One-Shot

AI Servo

AI Focus

Auto

Manual

Program shift

Exposure

compensation

AEB

AE lock

Depth-of-field

preview

Evaluative

Partial

Centerweighted

average

Single

Continuous

Auto

Manual

Flash off

Red-eye reduction

FE lock

Camera setting reset

Image sensor cleaning

: Automatic Setting : Selection Possible *With AE lock.

123

Since the image size is smaller than the

35mm-format film format, the equivalent lens

focal length will increase by 1.6x.

Image size

(22.7 x 15.1 mm / 0.89 x 0.59 in)

35 mm image size

(36 x 24 mm / 1.42 x 0.94 in)

AF Modes and Drive Modes

Autofocus tracks the

moving subject, and

the exposure is set

when the shot is

taken.

The above conditions

apply during

continuous shooting.

AF continues during

continuous shooting.

(approx. 2.5 fps, up

to a max. burst of 4

images.)

Drive mode ONE SHOT AF AI Servo AF AI Focus AF

Single

An image cannot be taken

unless focus is achieved.

When focus is achieved, it

is locked. With evaluative

metering, the exposure

setting is also locked. (The

exposure setting is stored

in memory before the shot

is taken.)

The above conditions

apply during continuous

shooting. (approx.2.5 fps

to a max. burst of 4

images.)

Automatically

switches

between

ONE SHOT

AF and AI

Servo AF

according to

the subject

status.

Continuous

Function Availability Table

124

Troubleshooting Guide

If there is a problem, first refer to this Troubleshooting Guide.

“The battery cannot be recharged.”

• You are using the wrong battery.

sUse Battery Pack BP-511 or BP-512.

• The battery is not properly attached to the charger.

sAttach the battery properly to the charger. (p.18)

“The camera does not operate even when the Power switch is set

to <1>.”

• The battery is exhausted.

sChange the battery pack. (p.18)

• The battery is not installed properly.

sInstall the battery properly. (p.20)

• Battery compartment cover is not closed.

sClose the battery compartment cover tightly. (p.20)

• CF card slot cover is not closed.

sLoad the CF card firmly until the CF card eject button pops out, then close

the CF card slot cover tightly. (p.24)

“The access lamp still blinks even when the Power switch is set to

<2>.”

• If you set the Power switch to <OFF> right after shooting, the access

lamp will still blink for a few seconds while the image is recorded onto

the CF card.

sWhen the camera finishes recording the image to the CF card, the access

lamp will stop blinking and the power will turn off.

“The battery becomes exhausted quickly.”

• The battery is not fully charged.

sRecharge the battery fully. (p.18)

• The battery’s service life has expired.

sReplace the battery with a new one.

“The camera turns off by itself.”

• Auto power off is in effect.

sSet the Power switch to <1> again or set auto power off to [Off]. (p.30)

“Only the <π> icon is displayed on the LCD panel.”

• The battery has almost exhausted.

sRecharge the battery. (p.18)

Power Source

125

Troubleshooting Guide

“No images can be shot or recorded.”

• The CF card is not properly loaded.

sLoad the CF card properly. (p.24)

• The CF card is full.

sUse a new CF card or erase unnecessary images. (p.24, 95)

• The battery is exhausted.

sRecharge the battery. (p.18)

• You did not focus well. (The focus confirmation light in the viewfinder

blinked.)

sPress the shutter button halfway and focus the subject. If you still cannot

focus properly, focus manually. (p.26, 64)

“The LCD monitor does not display a clear image.”

• The LCD monitor screen is dirty.

sUse a soft cloth to clean the screen.

• The LCD’s service life has expired.

sConsult your nearest customer service center or dealer.

“The image is out of focus.”

• The lens focus mode switch is set to <MF> or <M>.

sSet the lens focus mode switch to <AF>. (p.23)

• Camera shake occured when you pressed the shutter button.

sTo prevent camera shake, hold the camera still and press the shutter button

gently. (p.26, 36)

“The CF card cannot be used.”

• [ **] is displayed on the LCD panel.

sIf it is [ ], see page 98.

sIf it is [ ], see page 127.

• You are using a non-Canon CF card.

sUsing Canon CF cards is recommended. (p.2, 129)

“The message “ ” appears on the LCD panel.”

• The date/time battery is exhausted.

sReplace the battery with a new one. (p.33)

Shooting

126

Troubleshooting Guide

“The image cannot be erased.”

• The image is protected.

sCancel the protection first. (p.94)

“The date and time is wrong.”

• The correct date and time has not been set.

sSet the correct date and time. (p.32)

“No image appears on the TV screen.”

• Video cable plugs are not inserted fully.

sInsert the video cable plugs firmly all the way. (p.93)

• The correct video format (NTSC or PAL) has not been set.

sSet the camera to the correct video format to match the TV set. (p.30)

Image Review

127

Error Codes

If a camera error occurs, “ xx” will be displayed on the LCD panel.

Follow the instruction below according to the error code.

If the same error occurs often, something is probably wrong with the

camera. Jot down the “xx” error code and take your camera to the

nearest Canon Service Center.

If an error occurs after you shoot, the camera might have missed the

shot. Press the <]> button to see if the image appears on the LCD

monitor.

Error code Countermeasures

Clean the lens contacts. (p.9)

There is a problem with the CF card. Do one of the

following: Remove and reload the CF card, use another

CF card, or format the CF card.

Since the CF card is full, no more images can be

recorded. Erase unnecessary images in the card or

replace the CF card.

Something obstructed the built-in flash’s pop-up

operation.

Tur n < 2> the Power switch and turn it <1> again.

An error other than the above has occurred.

Remove and re-install the battery.

128

Major Accessories (optional)

Compact Power Adapter CA-PS400

Quick charger for Battery Pack BP-511 and BP-512.

Recharging time for one battery pack is about 90

minutes, and two packs can be attached to it at the

same time. DC Coupler DR-400 (optional) can also

be connected to the CA-PS400. Compatible with AC

100 - 240 V.

AC Adapter Kit ACK-E2

Power source kit (AC adapter, DC coupler, power

cord) for supplying power to the camera with a

household power outlet. Compatible with AC 100 -

240 V.

Battery Pack BP-511

Powerful, lithium-ion, recharegable power pack.

When fully recharged, it enables approx. 500 shots

to be taken (at 20˚C/ 68°F with 50% flash use).

Battery Grip BG-E1

Accommodates two Battery Pack BP-511 or BP-

512’s. Equipped with a vertical-grip shutter button,

main dial, AE lock/FE lock button, AF point selector,

and exposure compensation/aperture setting button.

E-Series Dioptric Adjustment Lenses

One of ten E-series dioptric adjustment lenses (– 4 to

+3 diopters) can be attached to the camera’s eyepiece

to further expand the dioptric adjustment range.

Semi-Hard Case EH-16L

Dedicated case to protect the camera.

It can accommodate the camera attached with the

EF-S18-55mm f/3.5-5.6 lens.

129

Major Accessories (optional)

Shoe-mount Speedlites

An EX-series Speedlite can be attached to the

camera’s hot shoe. It provides high-output flash and

features like high-speed sync (FP flash) and FE

lock. Flash shooting is as easy as normal AE

shooting.

Macro Flash

The EX-series Macro Lites are ideal for macro flash

shooting.

You can fire only one flash tube or set a flash ratio

to create sophisticated lighting effects.

CF Card

Data storage device where the captured images are

recorded. CF cards made by Canon are

recommended.

Remote Switch RS-60E3

This is a remote switch with an 60 cm/ 2.0 ft. cord to

prevent camera shake for super-telephoto shots,

macroshooting, and bulb exposures. The switch has

the same effect as pressing the shutter button

halfway or completely. A shutter-release lock is also

provided.

Remote Controller RC-5

This is a remote control transmitter that enables you

to take shots from 5 m/ 16.4 ft. away from the

camera. Press the transmitter button and the shot

will be taken after a 2-sec. delay.

130

System Map

Eyecup Ef

Rubber Frame Ef

Eyepiece Extender

EP-EX15

Angle Finder C

EF lenses

EF-S

lens

Date / time

CR2016 lithium

battery

Remote

Switch

RS-60E3

Remote

Controller

RC-5

E-series Dioptric

Adjustment Lenses

Neck Strap

EW-100DBII

220EXST-E2 420EX 550EX Macro Ring Lite

MR-14EX

Bundled

Accessories

Macro Twin Lite

MT-24EX

Semi-hard Case

EH-16L

Battery Pack

BP-511

Battery Grip

BG-E1

Battery Charger

CB-5L

AC Adapter

AC-E2

DC Coupler

DR-400

AC Adapter

Kit ACK-E2

Compact Power

Adapter

CA-PS400

Battery Pack

BP-512

131

PC card slot

CF card

Card reader

TV/Video

Windows XP

(Home Edition / Professional)

Windows 2000 Professional

Windows ME

Windows 98 Second Edition

Mac OS 9.0-9.2

Mac OS X

PC card adapter

• EOS DIGITAL Solution Disk

• Adobe Photoshop Elements Disk

Interface cable IFC-300PCU

Video Cable

VC-100

USB port

BJ printer for direct printing

Card Photo Printer

Computer

System Map

132

Specifications

• Type

Type: Digital, single-lens reflex, AF/AE camera with built-in

flash

Recording medium: Type I and II CF card

Image size: 22.7 mm x 15.1 mm

Compatible lenses: Canon EF-S and EF lenses

(35mm-equivalent focal length is equal to approx.1.6

times the marked focal length.)

Lens mount: Canon EF mount

• Image Sensor

Type: High-sensitivity, high-resolution, large CMOS sensor

Pixels: Effective pixels: Approx. 6.30 megapixels

(3088x2056)

Total pixels: Approx. 6.50 megapixels (3152x2068)

Aspect ratio: 3:2

Color filter system: RGB primary color filter

Low-pass filter: Located in front of the image sensor, non-removable

• Recording System

Recording format: JPEG supporting Design rule for Camera File

system (except when Adobe RGB is set) and RAW

Image format: JPEG and RAW (12-bit)

File size: (1) Large/Fine: Approx. 3.1 MB (3072x2048 pixels)

(2)

Large/Normal: Approx. 1.8 MB (3072x2048 pixels)

(3) Medium/Fine: Approx. 1.8 MB (2048x1360 pixels)

(4)

Medium/Normal: Approx. 1.2 MB (2048x1360 pixels)

(5) Small/Fine: Approx. 1.4 MB (1536x1024 pixels)

(6)

Small/Normal: Approx. 0.9 MB (1536x1024 pixels)

(7) RAW: Approx. 7 MB (3072x2048 pixels)

Exact file sizes depend on the subject and ISO speed.

File numbering: Consecutive numbering, auto reset

Processing parameters: Parameters 1 and 2, Adobe RGB, and three sets of

custom processing parameters (4 parameters with 5

available settings each) can be set

Interface: USB (Standard/PTP)

Video output (NTSC/PAL)

• White Balance

Settings: Auto, daylight, shade, cloudy, tungsten bulb, White

fluorescent light, flash, custom

Auto white balance: Auto white balance with the image sensor

Color temperature compensation:

White balance bracketing: +/–3 stops in whole-stop

increments

133

Specifications

• Viewfinder

Type: Pentamirror, eye-level

Coverage: 95% vertically and horizontally with respect to the

effective pixels

Magnification: 0.8x (–1 diopter with 50mm lens at infinity)

Eye point: 21 mm

Dioptric adjustment range: –3.0 - +1.0 diopter

Focusing screen: Fixed, all-matte screen

Mirror: Quick-return half mirror

(Transmission:reflection ratio of 40:60, no mirror cut-

off with EF 600mm f/4 or shorter lens)

Viewfinder information: AF information (AF points, focus confirmation light),

exposure information (shutter speed, aperture value,

manual exposure, AE lock, exposure level), flash

information (flash ready, red-eye reduction lamp on,

high-speed sync, FE lock), shots remaining, CF card

information

Depth-of-field preview: Enabled with depth-of-field preview button

• Autofocus

Type: TTL-CT-SIR with a CMOS sensor

(TTL secondary image-registration, phase detection)

AF points: 7

AF working range: EV 0.5-18 (at 20˚C/68˚F, ISO 100)

Focusing modes: One-Shot AF, AI Servo AF, AI Focus AF, Manual

focusing (MF)

AF point selection: Automatic selection, manual selection

Active AF point indicator: Superimposed in viewfinder and indicated on LCD

panel

AF-assist beam: Stroboscopic flash

Effective range: Approx. 4.0m/13.1ft. at center,

approx. 3.5m/11.5ft. off-center

• Exposure Control

Metering system: TTL full aperture metering with 35-zone SPC

• Evaluative metering (linkable to any AF point)

•

Partial metering (approx. 9% of viewfinder at center)

• Centerweighted average metering

(Set automatically in manual exposure mode)

Metering range:

EV 1-20 (at 20˚C/68˚F with 50mm f/1.4 lens, ISO 100)

Exposure control systems: Program AE (Full Auto, Portrait, Landscape, Close-

up, Sports, Night Portrait, Flash Off, Program),

shutter-priority AE, aperture-priority AE, depth-of-

field AE, manual exposure, E-TTL autoflash

134

ISO speed: Basic Zone modes: Automatic

Creative Zone modes: Equivalent to ISO 100, 200,

400, 800, 1600

Exposure compensation: AEB: +/–2 stops in 1/3-stop increments

Manual: +/–2 stops in 1/3-stop increments (can be

combined with AEB)

AE lock: Auto: Applied when focus is achieved in the One

Shot AF mode with evaluative metering.

Manual: Applied with AE lock button.

• Shutter

Type: Electronically-controlled focal-plane shutter

Shutter speeds: 1/4000 - 30 sec. (1/3-stop increments), bulb, X-sync

at 1/200 sec.

Shutter release: Soft-touch electromagnetic release

Self-timer: 10-sec. delay

Remote control: Compatible with: Remote Switch RS-60E3

Remote Controller RC-5/RC-1

• Built-in Flash

Type: Auto pop-up E-TTL autoflash (retractable)

Guide No.: 13 (ISO 100, meters), 43 (ISO 100, ft.)

Recycling time: Approx. 3 sec.

Flash-ready indicator: Flash-ready icon lights in viewfinder

Flash coverage: 18mm lens angle covered

Flash metering system: E-TTL autoflash (linked to all AF points)

• External Speedlite

EOS-dedicated Speedlites: E-TTL autoflash set with EX-series Speedlites

• Drive System

Drive modes: Single, continuous, Self-timer/Remote control

Continuous shooting speed: Approx. 2.5 fps (at 1/250 sec. or faster speeds)

Max. burst during continuous shooting: 4 shots

• LCD Monitor

Type: TFT color liquid-crystal monitor

Screen size: 1.8 inches

Pixels: Approx. 118,000

Image coverage: Approx. 100% with respect to the effective pixels

Brightness control: 5 levels

Specifications

135

• Playback

Image display format: Single image, single image (Info), magnified view

(Approx. 1.5x-10x), 9-image index, zoom in, autoplay,

image rotation, and jump

Highlight alert: In the single image and single image (Info) modes,

any overexposed highlight areas with no image

infomation will blink.

• Image Protection and Erase

Protection: Single images can be protected or cancelled.

Erase: Single image or all images in the CF card can be

erased (except protected images).

• Direct Printing from the Camera

Compatible printers: Canon card photo printers and BJ printers for direct

printing from the camera

Printable images: JPEG images

Settings: Print quantity, style (image, paper, borders, date),

and trimming

• Menus

Menu categories: Shooting menu, Playback menu Setup menu

LCD monitor language: 12 languages provided (English, German, French,

Dutch, Danish, Finnish, Italian, Norwegian, Swedish,

Spanish, Simplified Chinese, and Japanese.)

• Power Source

Battery: One Battery Pack BP-511/BP-512

* AC power can be supplied via the DC coupler.

[shots]

Battery life:

*The above figures apply when a fully-charged

Battery Pack BP-511/BP-512 is used.

Battery check: Automatic

Power saving: Provided. Power turns off after 1, 2, 4, 8, 15, or 30

min.

Date/time back-up battery: One CR2016 lithium battery

Specifications

No Flash 50% Flash Use

Shooting Conditions

Temperature

At 20˚C / 68°F

At 0˚C / 32°F

600

450

400

350

136

• Dimensions and Weight

Dimensions (W x H x D): 142 x 99 x 72.9 mm / 5.6 x 3.9 x 2.9 in

Weight: 560 g / 19.7 oz (body only)

• Operating Environment

Operating temperature range:

0 - 40˚C / 32 - 104°F

Operating humidity range: 85% or lower

• Battery Charger CB-5L

Compatible batteries: Battery Pack BP-511/BP-512

Battery mount: 1

Power cord length: Approx. 1.8 m / 5.9 ft.

Recharging time: Approx. 90 min.

Rated input: AC 100-240 V (50/60 Hz)

Rated output: DC 8.4 V

Operating temperature range:

0 - 40˚C / 32 - 104°F

Operating humidity range: 85% or lower

Dimensions (W x H x D): 91.0 x 32.3 x 67.0 mm / 3.6 x 1.3 x 2.6 in

Weight: 105 g / 3.7 oz (excluding power cord)

• EF-S18-55mm f/3.5-5.6

Angle of view: Diagonal extent: 74˚20' - 27˚50'

Horizontal extent: 64˚30' - 23˚20'

Ver tical extent: 45˚30' - 15˚40'

Construction: 11 elements in 9 groups

Minimum aperture: f/22-36

Magnification and field of view:

18mm: 0.1x (248 x 161 mm)

55mm: 0.28x (81 x 54 mm)

Min. focusing distance: 0.28 m

Filter size: 58mm

Hood: EW-60C

Max. diameter x length: 69 x 66.2 mm / 2.7 x 2.6 in

Weight: 190 g / 6.7 oz

Case: LP814

•All the specifications above are based on Canon’s testing standards.

•The camera’s specifications and physical appearance are subject to change

without notice.

Specifications

137

Digital Camera Model DS6041 Systems

This device complies with Part 15 of the FCC Rules. Operation is subject

to the following two conditions: (1) This device may not cause harmful

interference, and (2) this device must accept any interference received,

including interference that may cause undesired operation.

Note: This equipment has been tested and found to comply with the limits

for class B digital devices, pursuant to Part 15 of the FCC Rules.

These limits are designed to provide reasonable protection against

harmful interference in a residential installation. This equipment

generates, uses and can radiate radio frequency energy and, if not

installed and used in accordance with the instructions, may cause

harmful interference to radio communications. However, there is no

guarantee that interference will not occur in a particular installation.

If this equipment does cause harmful interference to radio or

television reception, which can be determined by turning the

equipment off and on, the user is encouraged to try to correct the

interference by one or more of the following measures:

— Reorient or relocate the receiving antenna.

— Increase the separation between the equipment and receiver.

— Connect the equipment into an outlet on a circuit different from

that to which the receiver is connected.

—

Consult the dealer or an experienced radio/TV technician for help.

The cable with the ferrite core provided with the digital camera must be

used with this equipment in order to comply with Class B limits in Subpart

B of Part 15 of the FCC rules.

Do not make any changes or modifications to the equipment unless

otherwise specified in the manual. If such changes or modifications

should be made, you could be required to stop operation of the

equipment.

Canon U.S.A. Inc.

One Canon Plaza, Lake Success, NY 11042, U.S.A.

Tel No. (516)328-5600

The Mark is a directive conformity mark of the

European Community (EC).

This mark indicates that the product complies with

Australia’s EMC regulations.

138

AC Adaptor Kit ...................... 15, 22

Accessories ............................... 128

A-DEP ......................................... 74

Adobe RGB ................................. 55

AE Lock ....................................... 78

AEB (Auto Exposure Bracketing) ...

AF Mode ................................... 123

AF Point ...................................... 62

AF-Assist Beam .......................... 63

AI Focus AF .............................. 123

AI Servo AF ............................... 123

Aperture value ............................. 70

Attaching the Strap ..................... 17

Auto playback .............................. 91

Auto power off ............................. 30

Auto Rotation .............................. 59

Av ................................................ 70

Basic Zone .................................. 14

Battery ........................................ 18

Battery Charger .......................... 15

Battery Level Icons ..................... 20

Battery Life .................................. 21

Bulb Exposures ........................... 79

CF Card .......................... 9, 24, 129

CF card formatting ...................... 97

Changing the Review Time ......... 43

Checking Camera Settings ......... 60

Cleaning the Image Sensor ........ 34

Clear all camera settings ............ 31

Clear camera settings ................. 31

Close-up ...................................... 40

Continuous shooting ................... 65

Creative Zone ............................. 14

Custom White Balance ................ 52

Date/Time ................................... 32

Depth-of-field Preview ................. 71

Dioptric Adjustment ..................... 36

Direct Printing ..................... 99, 116

DPOF ........................................ 109

Drive Mode .................................. 65

Equipment Check List ................... 3

Erasing ........................................ 95

Error Codes ............................... 127

Exposure Compensation ............. 75

Eyepiece Cover ........................... 46

FE Lock ....................................... 83

File Numbering ............................ 58

Flash off ...................................... 41

Focus lock ................................... 63

Full pressing ................................ 26

Fully Automatic ........................... 38

Function Availability Table ......... 122

Halfway pressing ......................... 26

Highlight Alert ............................. 87

Histogram .................................... 87

Holding the Camera .................... 36

Image Information ....................... 86

Image Jump ................................ 90

Image Review ............................. 42

Image Sensor .............................. 34

Image Zone ................................. 14

Index

139

Index

Image-Recording Quality ............ 48

Index Display ............................... 88

ISO Speed .................................. 50

Landscape .................................. 40

Language .................................... 30

LCD Monitor ............................ 9, 31

LCD Panel ............................... 9, 12

LCD Panel Illumination ................ 84

Lens ............................................ 23

Magnified View ............................ 89

Main dial ................................ 16, 27

Manual Focusing ......................... 64

Max. Capacity ............................. 49

Menu Settings ............................. 28

Metering Modes .......................... 84

Mode Dial .................................... 14

Night Portrait ............................... 41

Nomenclature .............................. 10

NTSC .......................................... 93

Number of copies ...................... 106

One-Shot AF ............................. 123

PAL .............................................. 93

Parameters ............................ 55, 56

Portrait ........................................ 40

Power Switch .............................. 26

Print Order ................................ 110

Print Type .................................. 110

Printing Options ........................ 110

Printing Style ............................. 104

Program AE ................................ 66

Protection .................................... 94

RAW ............................................ 48

Recharging the Battery ...

18, 20, 128

Red-eye Reduction ..................... 82

Replacing the Date/Time Battery ...

Rotating an Image ....................... 92

Self-timer ..................................... 44

Shifting the Program ................... 67

shooting modes ........................... 14

Shutter Button ............................. 26

Shutter speed .............................. 68

Single image ............................... 86

Single -image shooting ............... 65

Specifications ............................ 132

Speedlite ..................................... 80

Sports ......................................... 41

System Map .............................. 130

Tr imming ................................... 106

Tv ................................................ 68

Video output ................................ 93

Viewfinder ................................... 13

WB-BKT ...................................... 53

White Balance ............................. 51

White Balance Auto Bracketing ... 53

Wireless Remote Control ............ 45

CANON INC. 30-2, Shimomaruko 3-chome, Ohta-ku, Tokyo 146-8501, Japan

U.S.A. CANON U.S.A. INC.

For all inquiries concerning this camera, call toll free in the U.S.

1-800-OK-CANON or write to: Customer Relations, Canon U.S.A., Inc.

One Canon Plaza, Lake Success, N.Y. 11042-1198

CANADA CANON CANADA INC. HEADQUARTERS

6390 Dixie Road, Mississauga, Ontario L5T 1P7, Canada

CANON CANADA INC. MONTREAL BRANCH

5990, Côte-de-Liesse, Montréal Québec H4T 1V7, Canada

CANON CANADA INC. CALGARY OFFICE

2828, 16th Street, N.E. Calgary, Alberta T2E 7K7, Canada

For all inquiries concerning this camera, call toll free in Canada

1-800-OK-CANON

EUROPE, CANON EUROPA N.V.

AFRICA & Bovenkerkerweg 59-61, P.O. Box 2262, 1180 EG Amstelveen, The Netherlands

MIDDLE EAST CANON COMMUNICATION & IMAGE FRANCE S.A.

102, Avenue du Général de Gaulle 92257 La Garenne-Colombes Cedex, France

CANON UK LTD.

Woodhatch Reigate Surrey RH2 8BF, United Kingdom

CANON DEUTSCHLAND GmbH

Europark Fichtenhain A10, 47807 Krefeld, Germany

CANON ITALIA S.p.A.

Palazzo L, Strada 6, 20089 Rozzano, Milanofiori, Milano, Italy

CANON Schweiz AG

Geschäftsbereich Wiederverkauf, Industriestrasse 12, CH-8305 Dietlikon, Switzerland

CANON G. m. b. H.

Oberlaaerstrasse 233, 4th floor, 1100 Wien, Austria

CANON España, S. A.

C/Joaquín Costa, 41, 28002 Madrid, Spain

SEQUE Soc. Nac. de Equip., Lda.,

Praça da Alegria, 58, 2°, 1269-149 Lisboa, Portugal

CENTRAL & CANON LATIN AMERICA, INC. DEPTO DE VENTAS

SOUTH AMERICA 703 Waterford Way Suite 400 Miami, FL 33126 U.S.A.

CANON LATIN AMERICA, INC. CENTRO DE SERVICIO Y REPARACION

Apartado 2019, Zona Libre de Colón, República de Panamá

ASIA CANON HONGKONG CO., LTD.

9/F, The Hong Kong Club Building, 3A Chater Road, Central, Hong Kong

CANON SINGAPORE PTE. LTD.

79 Anson Road #09-01/06 Singapore 079906

OCEANIA CANON AUSTRALIA PTY. LTD.

1 Thomas Holt Drive, North Ryde, N.S.W. 2113, Australia

CANON NEW ZEALAND LTD.

Akoranga Business Park, Akoranga Drive, Northcote, Auckland, New Zealand

JAPAN CANON SALES CO., INC.

16-6, Kohnan 2-chome, Minato-ku, Tokyo 108-8011, Japan

This Instruction Manual booklet is current as of August 2003. For information on

using the camera with system accessories introduced after this date, contact your

nearest Canon Service Center.

CT1-1244-000

0000Ni0.0

Husqvarna 300D User Manual To The 62ec26bc 2209 4934 85fe 01407b1a226b

Navigation menu

Versions of this User Manual:

Views

Navigation