Husqvarna Mulch Kit 60 Pz29 966444701 2011 03 Owner S Manual OM, 60, PZ29, 966444701,
2014-07-06
: Husqvarna Husqvarna-Mulch-Kit-60-Pz29-966444701-2011-03-Owner-S-Manual husqvarna-mulch-kit-60-pz29-966444701-2011-03-owner-s-manual husqvarna pdf
Open the PDF directly: View PDF 
.
Page Count: 3
| Download | |
| Open PDF In Browser | View PDF |
INSTALLATION INSTRUCTIONS 60" MULCH KIT - 966 444701 IMPORTANT: BEFORE PROCEEDING, PLACE ALL CONTROLS IN THE DISENGAGED OR OFF POSITION, REMOVE SPARK PLUG WIRES FROM THE SPARK PLUGS. WARNING! Blades are sharp. Protect your hands with gloves and/or wrap blades with a heavy cloth when handling. 1. Block the front of the mower up to give access to the underside of the front deck. Remove the discharge chute assembly by removing the hardware (1) on the bracket top. Set the assembly and hardware aside for reinstallation when the mulch kit is not being used. 2. Remove the three nuts and bolts that protect the mulch kit fastening locations (2). NOTE: Only two hardware sites are shown in the illustration. 3. Carefully remove the cutting blades, retaining the blade bolts for reuse. Clean any grass out from underneath the deck. 4. Bolt left hand corner mulch baffle to the outside of the deck baffle weldment as shown in the illustration. P/N 115 247027 R1 08/15/09 1 1 2 2 INSTALLATION INSTRUCTIONS 5. Set the left hand baffle in place, with weld bolt up through the deck. Secure baffle to deck with nuts and bolts as shown. Attach right hand baffle with the same procedure. 6. Fasten the mulch cap to the deck and baffle. P/N 115 247027 R1 08/15/09 INSTALLATION INSTRUCTIONS 7. Install the kit mulching blades using the existing blade bolt (torque to 90 ft./lbs.). 8. Rotate the blades by hand and check for clearance of all baffles. 9. Make sure all hardware is tight. 10. Remove blocks and return the mower to its normal position. Mulching Guidelines To ensure acceptable mulching performance: • The length of grass to be cut in one pass should not exceed 1/3 of the total grass height. Example: If grass height is 3", the mower deck cutting height should be set at not less than 2". • Ground speed should normally be reduced to allow clippings to be finely mulched. • Engine RPM should be set at maximum. • Blades must be kept sharp. • The underside of deck should be cleaned out often to prevent grass accumulation. • Conditions must be dry. Wet grass does not mulch well and grass accumulates under deck. P/N 115 247027 R1 08/15/09
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.4 Linearized : No Create Date : 2009:08:18 18:39:41-05:00 Subject : HOEN2011_966444701 Modify Date : 2011:03:02 17:21:51+01:00 Producer : Adobe PDF Library 8.0 Trapped : False Creation Date : 2009:08:18 18:39:41-05:00 Mod Date : 2011:03:02 17:21:51+01:00 Author : HUSQVARNA Metadata Date : 2011:03:02 17:21:51+01:00 Creator Tool : Adobe InDesign CS3 (5.0) Thumbnail Format : JPEG Thumbnail Width : 256 Thumbnail Height : 256 Thumbnail Image : (Binary data 11638 bytes, use -b option to extract) Instance ID : uuid:10c87ef3-28d7-4494-9b17-f433dfd9360e Document ID : adobe:docid:indd:d87d5e29-82a1-11de-9275-d59869887ee6 Rendition Class : proof:pdf Derived From Instance ID : d87d5e28-82a1-11de-9275-d59869887ee6 Derived From Document ID : adobe:docid:indd:d87d5e27-82a1-11de-9275-d59869887ee6 Format : application/pdf Title : OM, Mulch kit 60", PZ29, 966444701, 2011-03 Description : HOEN2011_966444701 Creator : HUSQVARNA Page Count : 3 Page Layout : SinglePage Has XFA : No Page Mode : UseThumbsEXIF Metadata provided by EXIF.tools