HwaCom Systems M210 IP Set top box User Manual
HwaCom Systems Inc. IP Set top box
User manual
1 2 43 5
TVOLUTION M210
Quick Start
1 Your TVOLUTION M210
T
Connecting the power supply adapter to power jack
he HDTV must support 720p or higher.
The fi gures in this guide are for your reference only. The actual
products may vary.
TV
2 Connecting cables
Connecting to an HDTV
Connect one end of the HDMI cable to your M210's HDMI out port and
the other end to the HDTV's HDMI in port.
Connecting to a power supply
Power Jack
After being connected to a power supply, your M210 automatically powers
on.
Switch the TV to HDMI input using the TV remote control. The M210's
home screen is then displayed on the TV.
• If your M210 is idle for 4 minutes,it enters screen saver mode.
• After the M210 enters sleep mode,please press 3 seconds
on your remote control to wake it up again.
Connecting to a set-top box (optional)
Connect one end of the HDMI cable to your M210's HDMI in port and
the other end to the STB's HDMI out port.
You can also connect your M210 to other HDMI source devices,
such as Blue-ray players.
When the STB is powered on. Alternatively, after you complete the initial
setup of your M210, you can choose the HDMI icon in the lower left
corner of the M210's home screen to switch to STB input.
To switch back to the M210's screen, please use the remote control to
control M210.
3 Preparing a remote control
Remote control
1 Menu
2 Task Manager/
Standby and Wakeup,
Press and hold for 3 seconds
to go to the standby or wakeup
3 Up/down
4 Left/Right
5 OK
6
7
Mouse control
: Turn on/off the mouse
function
Back/ Home
Press and hold 1 seconds will
back to Home page
8 Volume down
9 Volume up
10 Status indicator
1
4
6
5
7
2
3
9
10
8
Optional remote control devices
In addition to the dedicated remote control, you can control your M210
using an smartphone, mouse or keyboard.
• Smartphone: Power on the M210 and follow the instructions on the TV
to scan the QR code remote control application. For details, see
the remote control application onscreen instructions.
• Mouse: Connect the mouse to your M210 via USB. The left mouse
button functions as the OK button and the right button as Back. A
wireless RF mouse is recommended.
• Keyboard: Connect the keyboard to your M210 via USB. The Enter
button functions as the OK button, Esc as Back, and up, down, left,
and right buttons as Navigation buttons. Android-compatible keyboards
are recommended.
Pairing the remote control
1. Insert the remote control USB receiver into your M210's USB port.
2. Wait for the system to automatically install the driver. The installation
takes about 20 seconds.
3. Press any key on the remote control and observe indicator status:
• If indicator turns on: The remote control has successfully paired with
your M210 and is working properly.
• If indicator blinks slowly: Press and hold and ,
simultaneously until indicator changes its status from blinking
rapidly to blinking slowly three times until fi nally shutting off.The
remote control then starts working properly.
Next time you only need to perform step 1 before using the remote
control.
Mouse mode
The remote control supports the air mouse function. By waving the
remote control, you can operate the mouse cursor on the TV, such as
moving the mouse cursor and clicking or selecting an item.
• To enter mouse mode, press ,To exit mouse mode, press
again.
• Install two AAA batteries to the remote control.
• Please do not mix old and new batteries.
• Press Back button to close the current dialog box or onscreen
keyboard.
• You can connect your M210 to a game controller via USB.
876 9
I cannot watch TV programs via the STB. What can I do?
Make sure all cables are correctly connected and your M210 is set to
STB input. If the problem persists, disconnect the M210 from the power
supply and restart it.
I cannot access the Internet. What can I do?
Make sure you have entered the correct password for the wireless
network and your wireless router is working properly and is connected
to the Internet. If it is connected to the Internet, disconnect the M210
from the power supply and restart it.
How do I improve my M210's wireless reception?
• Make sure that the TV is not blocking the M210.
• Keep your M210 away from sources of interference, such as
microwaves, electromagnetic ovens, and similar devices.
• Place the M210 near the wireless router.
• Use a device, such as a Wi-Fi repeater, to expand the coverage area.
How do I view the file details for all the devices sharing files with the
M210?
Go to your M210's file manager.
How do I connect the M210 to a computer monitor?
You need an HDMI to VGA or HDMI to DVI cable.
My M210 cannot identify a USB hard disk. What can I do?
Your portable hard disk may not have sufficient power. Connect
the portable hard disk to the USB Y cable's extended port or use another
external power supply.
My M210 cannot detect a USB flash drive or microSD card connected
to it. What can I do?
Reconnect the USB flash drive or microSD card to your M210.
If the problem persists, disconnect the M210 from the power supply and
restart it.
4
TVOLUTION Safety Information
5 FAQs
I connected my TV to the M210, but nothing is displayed.
What can I do?
Make sure your M210 is properly connected to the power supply and
TV. Check that the HDMI port on the TV is working, and that the TV is
set to HDMI input. If the problem persists, your M210 may be in sleep
mode or the HDMI cable may be damaged. Either wake up your M210
by pressing on the remote control, or replace the HDMI cable.
I connected my TV to the M210, but the image is not displayed properly.
I am experiencing issues, such as incorrect aspect ratio, color distortion,
or color bars. What can I do?
Make sure the M210 is securely connected to the HDMI port on your TV.
Then go to Settings > setting to change the
parameters. If the problem persists, the HDMI cable may be damaged.
Please replace the HDMI cable.
After I connected my TV to the M210, the image is displaying properly
but there is not audio output. What can I do?
Check that your TV and M210 are not muted and the volume has not
been turned down too low.
I cannot pair a Bluetooth device with my M210. What can I do?
Check that the batteries have sufficient power and are installed correctly.
If the problem persists, the Bluetooth device may not be compatible with
your M210. Verify this by checking whether other Bluetooth devices
work properly with your M210.
What can I do if the remote control is not responsive?
• Stay within 8 meters of the M210.
• Make sure the USB receiver is properly inserted into your M210's
USB port.
• Observe the indicators on the remote control. If indicator blinks
rapidly, the remote control's batteries have insufficient power. To
address this issue, replace the batteries. If indicator blinks slowly,
the remote control has disconnected from your M210. In this case,
press and hold and ,simultaneously until indicator
changes its status from blinking rapidly to blinking slowly three times
until finally shutting off.
• If the issue persists, restart your M210.
• I cannot install the remote control application. What can I do?
Completely remove the remote control application. The scan the
application and install it again.
microSD
card slot
Holds a microSD card to expand your M210's storage
space.
STB in Connects to an HDMI source device, such as a set-top box
(STB) or Blue-ray player.
Status
indicator
USB port Connects to a mouse, keyboard, flash drive, or other USB
device.
HDMI out Connects to an HDTV or HD display that has an HDMI port.
• Wi-Fi support: Enables the M210 to connect to a wireless network.
• Bluetooth support: Connects to a speaker or other Bluetooth device.
When your M210 has hotspot enabled, other devices, such as
mobile phones, will be able to connect to the M210's wireless
network.
6 Knowing more
This document is for reference only. Nothing in this guide constitutes a
warranty of any kind, expressed or implied.
Status Indicoator
Green : Active
Orange : Standby
Power Jack
MicroSD card slot
USB port
USB port
HDMI OUT
HDMI IN
Ethernet
STB
Steady orange: in sleep mode.
Steady green: in active mode.
QR code
FCC Statement
This equipment has been tested and found to comply with the limits for
a Class B digital device, pursuant to part 15 of FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to
radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment
does cause harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, the user is
encouraged to try to correct
The interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
This device complies with Part 15 of FCC Rules.
Operation is subject to the following two conditions:
This device may not cause harmful interference, and This device must
accept any interference received, including interference that may
cause undesired operation.
Note: The manufacturer is not responsible for any radio or TV
interference caused by unauthorized modifications to this equipment.
such modifications could void the user’s authority to operate this
equipment.
FCC RF Radiation Exposure Statement
This equipment complies with FCC RF radiation exposure limits set
forth for an uncontrolled environment. This equipment should be
installed and operated with a minimum distance of 20 centimeters
between the radiator and your body.
STB HDMI IN
Display / Display Position