Hybroad Vision Electronics Technology SP-110 IP STB User Manual

Download:
Mirror Download [FCC.gov]
Document ID	3114666
Application ID	jdK7wxjLSrVtylY/8t//Dg==
Document Description	user manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	17.6kB (220032 bits)
Date Submitted	2016-08-29 00:00:00
Date Available	2016-09-05 00:00:00
Creation Date	2016-08-15 15:15:45
Producing Software	Adobe PDF Library 11.0
Document Lastmod	2016-08-15 15:15:48
Document Title	注意事项
Document Creator	Acrobat PDFMaker 11 Word 版
Document Author:	lixudong

Contents
Attentions .............................................................................. 2
SAFETY GUIDE .................................................................................. 2
SAFETY PRECAUTIONS..................................................................... 2
SERVICING ........................................................................................ 2
INSPECTION OF ALL ATTACHMENTS .................................................. 3
Preparation ............................................................................ 4
FRONT PANEL ................................................................................... 4
REAR PANEL ..................................................................................... 4
REMOTE CONTROLLER ..................................................................... 5
USAGE TIPS ...................................................................................... 5
WAY OF CONNECTION ...................................................................... 6
Technical Specification ......................................................... 7
Attentions
Safety Guide
1. Must correctly select the power supply voltage, and do not
use the power supply outside the provided voltage value.
2. Before opening the power supply, make sure whether the
power cord and all connections are connected correctly and
completely.
3. if the machine is not used for a long time or is cleaned and
maintained, pull the power plug from the power outlet and
pay attention not to pulling the power cord.
4. When unplugging the power cord, should first close the
current power supply, and pull out the insulation part of the
plug with a hand slowly.
Safety Precautions
1. Do not place the machine in direct sunlight or at the place
near a heat radiation device.
2. Should place the machine on the level and solid surface to
prevent vibration affecting the machine to work properly.
3. Should place the machine at a well-ventilated place, where it
is not humid or dusty near.
4. Wipe the surface of the machine gently with a soft cloth, and
do not to use alcohol, gasoline and other organic solvents to
clean it.
5. Do not use the machine under the weight, impact or
vibration.
Servicing
1． Because the machine has complex internal circuits,
non-professionals are not allowed to open the upper cover of
it to avoid damage to it.
2． Users do not dismantle the machine parts freely, and the
warranty tag will expire if the machine is opened to be
repaired.
3． If it is confirmed to be maintained, please contact the local
warranty department to arrange maintenance.
4． If some parts need to be replaced, repair technicians must
select the original devices in line with the provisions of the
manufacturer.
Inspection of all attachments
After unpacking the machine, please check it in accordance with
the packing list and confirm whether the attachments contained
are complete. The picture below shows a reference diagram of
the attachments, and various models are equipped with different
attachments and the details of a packing list shall prevail.
The diagram and the diagrams of the components provided
below are schematic, and the physical appearance of all the
components shall prevail.
Preparation
Front Panel
Rear Panel
Remote controller
Usage Tips
1． Before the use of a set-top box, please start the network
connection device.
2． During the period of use, please do not pull the power plug
from the power outlet. The machine should be in standby
mode.
3． Install the battery
4． Remote controller of the machine is powered by two 7th
batteries, and make sure the positive and negative pole of
the battery in the process of installation.
5． Operating Range
 When the remote controller is in operation, its front-end
should be directed to the infrared receiver window of
the set-top box, and the distance should be less than 6
meters.
6． Attentions
 When the battery lacks of power, replace in timely, or



will affect the sensitivity of the remote control.
If the remote controller is not used for a long time, take
out the battery, so as to avoid corrosion or damage to
the battery caused by liquid leakage.
Do not make the remote control sensor directly
exposed to sunlight or lighting devices, or else it will be
caused to fail.
Do not place the remote controller in the wet or
high-temperature environment, and keep the remote
controller clean.
System Connection
Before connecting to the system, this device and other
relevant equipments should be powered off.
Way of Connection
Connected to the TV
input:
White port - left audio
channel
Red port - right audio
channel
Yellow-port - Video
From STB HDMI
OUT to TV HDMI IN
Technical Specification
H.265/HEVC main profile
Video format
H.264/AVC main and high profile,1080P 60fps
HD MPEG2/ MPEG4P2
MPEG-1 Layer 1, 2 and 3
Audio format
AAC LC, AAC LC+SBR Level 2,
AAC HE Level 2, AAC HE Level 4
Type
Output
Network Card
PAL / NTSC
HDMI output, Mini AV output, USB port
100/1000 Base-T Ethernet NIC
1 RJ45 Interface
Power adapter input AC 110~240V 50/60Hz
Power adapter
output
Power
Dimension
Operating
temperature
DC 12V ~ 1A
12W
122mm (W) × 122mm (D) × 32mm (H)
0℃ ~ 40℃
This device complies with part 15 of the FCC Rules. Operation is
subject to the follow
ing two conditions:
(1) This device may not cause harmful interference.
(2) This device must accept any interference received, including
interference that may cause undesired operation.
Caution the user that changes or modifications not expressly
approved by the party res
ponsible for compliance could void the user's authority to operate
the equipment.
IMPORTANT NOTE:
FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set
forth for an uncontrolled environment. This equipment should be
installed and operated with a minimum distance of 20mm between
the radiator & your body. This transmitter must not be co-located or
operating in conjunction with any other antenna or transmitter.
This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment
generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different from
that to which the re
ceiver is connected.
—Consult the dealer or an experienced radio/TV technician for help.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : Yes
Author                          : lixudong
Create Date                     : 2016:08:15 15:15:45+08:00
Modify Date                     : 2016:08:15 15:15:48+08:00
Subject                         : 
Tagged PDF                      : Yes
XMP Toolkit                     : Adobe XMP Core 5.4-c005 78.147326, 2012/08/23-13:03:03
Metadata Date                   : 2016:08:15 15:15:48+08:00
Creator Tool                    : Acrobat PDFMaker 11 Word 版
Document ID                     : uuid:b01887e0-6d76-40c9-97a6-1ca729fb56a4
Instance ID                     : uuid:3debc916-0a9e-43af-a1ac-9119d22f7343
Format                          : application/pdf
Title                           : 注意事项
Description                     : 
Creator                         : lixudong
Producer                        : Adobe PDF Library 11.0
Keywords                        : 
Source Modified                 : D:20160815071524
Company                         : 
Manager                         : 
Comments                        : 
Category                        : 
Tag Ad Hoc Review Cycle ID      : -1590069263.000000
Tag Email Subject               :  5721A???(20060107)
Tag Author Email                : Tommy.CW.Tang@pccw.com
Tag Author Email Display Name   : Tang, Tommy CW
Tag Previous Ad Hoc Review Cycle ID: 279108565.000000
Tag Reviewing Tools Shown Once  : 
KSO Product Build Ver           : 2052-10.1.0.5603
Page Layout                     : OneColumn
Page Count                      : 8

EXIF Metadata provided by EXIF.tools