Hype Wireless LPD HY-BOOM Bluetooth Speaker User Manual
Hype Wireless LPD LTD Bluetooth Speaker
User manual
are ukmmm, mil lmgllrim ma, urn-l, lemma in: HYPE Bluetooth®5pea ker Operation Manual HY»BOOM-BTVBLK Thank you for purchasing the Blueloolh‘” Boombox Stereo Speaker, in order to make the best use 0' this product and to use it safely, please read the instruction manual carefully and keep it for future reference. PACKAGE CONTENTS 0 Bluetooth' Boombax Speaker . USB Charging Cable - 3.5mm AUX cable 0 Operation Manual FEATURES . Oh/Olr power sWilch . Rechargeable lithium-ion battery . Perfect for use With a variety of electronic devices. indoors or outdoors. . Play audio files stored In your phone, tablet orsmart phone wirelessly lhrough Eluelooths. 0 Optional AUX IN to connect to external Cludlo players CHARGING THE UNIT Make Sure Ihe rechargeable IiIhlumrlon baflerv is placed into the battery compartment located at the back panel at the speaker. Connect one end of the supplied USB cable to your computer or compatible USE AC/DC GdOpIOl & the OIher end of ”re Cable to the speaker lo charge the speaker unit. Do not charge the unit for more than 5 hours CIS his will shorten the battery llfe. DO NOT USE THE UNIT WHILE CHARGING. Vau can use the unit without the battery in the battery compartment, as long as the unit Is connectr ed to a compatible usa power source BLUEI'OOTH PNRING Turn the main power switch on the back or speaker to the "ON” position. Turn on Eluetooth” On your BIueIOOIh’kerlabled device, Select ”HV—BOOM-BT" on your list of devices. IMPORTANT SAFETY INFOIWIATION . Read all lnstructlons before using thls product. . Do not leave this product unattended whlle cohnecled to the power supply. - Do not use ir unit has been dropped or damaged in any way. . Repairs to electrical equipment should only be performed by audlltled personnel. lmproper repairs may place user at serious risk. - Keep unit away tram sources at heat. . Do not use this unit tar anything other than its Intended use. . Do rrol play music or excessive levels especially near children, as damage to hearing may occur. SPECIFICATIONS EIUeIOOII’Im‘ V 3 0 Eluetoathw Range Up to 66" (20m) Speaker Diameter: l05mm Speaker. 2x5 watt speaker Frequency: l 50H1720KH1 Dlmension‘ 373'l40'230mm Rechargeable Battery Removable 500mAh WARRANTY INFORMATION The Condition of this warranty and our responsibilities undertnlswarrantyore as toliows: Supplier’s warranty ls non—transferable. And this warranty ls limited to the original purchaser only ' Vou must people to prove the date or ongtnai purchase of the urirlwith 0 dated receipt. - The warranty s not applicable If the product has been subject to physical abuse. improper installation. modmocr tron or repair by unauthorized third parly ' The responsibility at supplier’s products shall be limited to the repair at replacement or the product as its sole Cdlscretron ' Specifically exempt tram any warranty are limitedlte consumable components sublect to normal wear and tear such as batteries. decorates and other accessories ' A supplier will not take any responsibility it the tallure at the Unit has resulted from accident.abu5e. misuse, or any unauthorized repair, modtficatlon or disassemble ‘ Modification and repalr at the unrt should be done by authorized and aualltied sen/ice personnel, Center or returned to the manufacturer ' This warranty gives you speclilc legal rights, and you may also have other rights which vary under local laws. The rallowrng conditions comprise the requirements and scope of our warranty conditions and do not attect our legal and contractual wananty obligations. We otter Cl warranty on our products in accordance with the tallowlng conditions: 1) Hype“ products are covered ary 0 l2 month warranty. We will resolve damages or defects on Hypc'M products tree or charge within i2 months at the purchase date under the tallawing warranty condttlans. For any damage or defect determined tater than l2 months after the purchase date. proof ot a manufacturing taurt must be submrttea for repair under warranty 2) The warranty does not Cover batteries and other parts, which are considered consumables, parts that break easily such as glass or plastic or detects based on normal wear and tear. There is no warranty obligation in the event of marginal differences compared to the target appearance and workman- ship provided these have a negligible ettect on the product’s fitness for use, in the event at damage caused by chemical or electrochemical etfects. by water or generally tram abnormal conditions. 3) The warranty will be performed in such a way that We shall decide whether to repair the defective parts or to replace them with working pans free or charge, Hypte‘M reserves the right to exchange the product taro replacement product of equal value if the product sent in cannot be repaired within a reasonable time or at a reasonable cost Requests cannot be made tor reports ta be carried out on Site. Ports that have been replaced or exchanged become our property. 4) The warranty claim does not apply it repairs or other work is carried out by unauthorized persons or it our products are equipped with additional parts or accessories that are not approved for our product 5) Warranties that have been activated do not cause the warranty period to be extended, nor do they tngger a new warranty period The warranty period tor any replacement parts installed ends wtth the warranty period tor the entire product. a) Any other further claims are excluded, especialty those for replacement due to damage Caused to the outside at the product, provided there is no obligatory legal liability We therefoe accept no liablllty tor accidental, indirect or other consequential damage of any kind, which leads to usage restrictions, data loss, and loss or earnings or interruption to business Asserting a warranty claim: 'l) To make use of the warranty service tor hardware issues, you must contact the Hype'M Sen/Ice Center by email at support@dgluscl com 2) HyperM will try to diagnose and solve your problem if it is determined that a warranty claim exists. you Will be given an RMA number (Return Material Authorization) and will be asked to send the product to Hype'“. IMPORTANT HypeiM will onty accept pomels that have an RMA number. Please observe the taiiawlng when sending the product: i) Send the product suitabty packaged wtth carriage and insurance paid. Do not enclose any accessories with the product (cables, chargers, manuals, etc.) unless the l'lype‘M Service Center specifies othem/ise 2) Mark the RMA number on the outside of the package in such a way that it is visible and clearty legible. 3) Vou must enclose a copy or the sales slip as proot or purchase 4) Once Hype'M has received the product, it will meet its warranty obligations in accordance with the warranty conditions and will return the product to the sender with carnage and Insurance paid Service outside at warranty Hype’“ can retuse any service claim made that is not covered by the warranty. it ityoew agrees to provide a service outside the warranty, the customer Wlll be invoiced tar all repair and transport costs. l—iypeW will not accept any packages that have not trst been approved by i-typeW by means of an RMA (Return Material Authorization) Contact us with questions at Support®dglusacom This equipment has been tested and found to comply with the limits for a Class B digital device. pursuant to part 15 of FCC Rules. These li its are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. lfthis equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more ofthe following measures: "Reorient or relocate the receiving antenna. --lncrease the separation between the equipment and receiver, --Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. ”Consult the dealer or an experienced radio/TV technician for help. This deVlce complies Witn Part 1 5 of FCC Rules Operation is Subject to the foilowmg two conditions (1 )This devtce may not cause harmful interference, and (2)Thi5 device must accept any interference received, including interference that may cause undesired operation. Note: The manufacturer is not responsible for any radio or TV interference Caused by unauthorized modifications to this equipment. such modifications could v the user's authority to operate this equipment Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment, This device is measured RF output power is less than the SAR exclusion threshold value for human head and body , Therefore, SAR test is not necessary.
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.6 Linearized : Yes Encryption : Standard V4.4 (128-bit) User Access : Print, Copy, Extract, Print high-res Author : Administrator Create Date : 2015:07:08 15:27:17+08:00 Modify Date : 2015:07:08 15:36:33+08:00 XMP Toolkit : Adobe XMP Core 4.2.1-c041 52.342996, 2008/05/07-20:48:00 Creator Tool : PScript5.dll Version 5.2.2 Metadata Date : 2015:07:08 15:36:33+08:00 Format : application/pdf Title : User manual - 副本 Creator : Administrator Producer : Acrobat Distiller 9.0.0 (Windows) Document ID : uuid:7625f0cf-2d2d-43d1-90b4-f4b197d6e634 Instance ID : uuid:22d311d5-4e4f-4a66-8994-d210d89bb7d6 Page Count : 3EXIF Metadata provided by EXIF.tools