Hyperkin M07305 Scout Premium 2.4GHZ Wireless Controller User Manual
Hyperkin inc. Scout Premium 2.4GHZ Wireless Controller
Hyperkin >
User Manual
Manual
Wirless Band: .2.412~2.47
The Production is 2.4G RF Game pad
Game Pad
1. SYNC Button :
Push Button can Wake up and Sync Game pad
Push Button 2sec can Turn Off Game Pad Power
Push Button 2 sec Again Can Turn ON Game pad
LED :
Blue led: No Connect , Blue led Flash Slower , Connect blue led is Turn ON
Red led: Charge Red LED Turn ON , full Charge Red LED Turn OFF
Low Power Red Led Flash Slower
All Key:
Start , Select , D pad ,L ,R , A ,B ,X ,Y
All Key like Original Function
2. if Game pad Connect , After 5 mins no play game pad ,
Game pad will go to Sleep
3. if Game pad no Connect Blue Led is flash , After 20sec no play game pad ,
Game pad will go to Sleep
4. All key can wake up the game pad
FCC Warning
This equipment has been tested and found to comply with the limits for a Class B
digital device,pursuant to part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential
installation. This equipment generates uses and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
-Reorient or relocate the receiving antenna. -Increase the separation between the
equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help. Any Changes or
modifications not expressly approved by the party responsible for compliance could
void the user's authority to operate the equipment.
(1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may
cause undesired operation.
* RF warning for Portable device: The device has been evaluated to meet general RF
exposure requirement. The device can be used in portable exposure condition
without restriction.