Hyperkin M07325 Wireless Bluetooth Controller for NES/ PC/ Mac User Manual

Hyperkin,inc Wireless Bluetooth Controller for NES/ PC/ Mac

user manual

Download: Hyperkin M07325 Wireless Bluetooth Controller for NES/ PC/ Mac User Manual
Mirror Download [FCC.gov]Hyperkin M07325 Wireless Bluetooth Controller for NES/ PC/ Mac User Manual
Document ID4087326
Application IDLG74FOVNIA1U0/RJ0Zkb0A==
Document Descriptionuser manual
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize12.14kB (151730 bits)
Date Submitted2018-11-28 00:00:00
Date Available2018-11-28 00:00:00
Creation Date2018-11-16 16:45:07
Producing SoftwareMicrosoft® Word 2010
Document Lastmod2018-11-16 16:45:07
Document Titleuser manual
Document CreatorMicrosoft® Word 2010
Document Author: terence

ENGLISH
QUICK USER GUIDE
www.hyperkin.com
© 2019 Hyperkin Inc. Hyperkin® is a registered trademark of Hyperkin Inc. Super NES® is a
registered trademark of Nintendo® of America Inc. Bluetooth® is a registered trademark of
Bluetooth Sig, Inc. This product is not designed, manufactured, sponsored, endorsed, or
licensed by Nintendo® of America Inc. nor Bluetooth Sig, Inc. in the United States and/or other
countries. All rights reserved. Patent Pending. Made in China.
BEFORE YOU BEGIN
• The CONTROLLER BUTTON is located on the very top
• The CONTROLLER LED INDICATOR is located on the face.
• The MICRO CHARGE PORT is located on the very top
Charging Your Product
1. Connect the provided MICRO CHARGE CABLE to your product. Connect the other end to a
USB power source.
2. A solid RED light on the CONTROLLER LED INDICATOR indicates the Product is charging.
3. The RED light will turn off when the product is fully charged.
Note: You can use the product even while it is charging.
4. A slowly flashing RED light on the CONTROLLER LED INDICATOR means the product is low
on battery.
Helpful Hints
• The Product can operate up to about 30 feet from your SNES console.
• After 5 minutes of no activity, the Product will go to SLEEP.
• If the Product is ON and not synced, the CONTROLLER LED INDICATOR will slowly flash
BLUE for 20 seconds, then go to SLEEP.
• The Product will automatically connect after the initial syncing.
When connecting to a BT-compatible device such as a computer or smartphone, the controller
will show up as “Input device (keyboard, mouse, etc.)” while pairing. Once paired, the controller
will be listed as “Hyperkin Pad.” Setup and functionality may vary depending on your device.
Warning: Changes or modifications to this unit not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
NOTE:
This device complies with part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and (2) this device must accept
any interference received, including interference that may cause undesired operation.
Caution: Any changes or modifications to this device not explicitly approved by manufacturer
could void your authority to operate this equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates,
uses and can radiate radio frequency energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be determined by turning
the equipment off and on, the user is encouraged to try to correct the interference by one or
more of the following measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
—Consult the dealer or an experienced radio/TV technician for help.
RF exposure compliance statement:
This device has been evaluated to meet the general RF exposure requirement, it can be used in
portable exposure condition without restriction.

Source Exif Data:
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : No
Page Count                      : 2
Language                        : zh-CN
Tagged PDF                      : Yes
Author                          : terence
Creator                         : Microsoft® Word 2010
Create Date                     : 2018:11:16 16:45:07+08:00
Modify Date                     : 2018:11:16 16:45:07+08:00
Producer                        : Microsoft® Word 2010
EXIF Metadata provided by EXIF.tools
FCC ID Filing: 2ARNF-M07325

Navigation menu