Hytera Communications BD50XIVHF Digital Portable Radio User Manual

Download:
Mirror Download [FCC.gov]
Document ID	3792043
Application ID	zi/ITSulJmrR3EMgupPcFA==
Document Description	User manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	31.46kB (393279 bits)
Date Submitted	2018-03-22 00:00:00
Date Available	2018-03-22 00:00:00
Creation Date	2018-03-23 00:16:05
Producing Software	GPL Ghostscript 9.21
Document Lastmod	2018-03-23 00:16:05
Document Title	Hytera BD55X Digital Portable Radio Owner's Manual R1.0
Document Creator	pdfFactory Pro www.pdffactory.com
Document Author:	l12029

Preface
Welcome to the world of Hytera and thank you for purchasing this product. This manual includes a description of
the functions and step-by-step procedures for use. It also includes a troubleshooting guide.
To avoid bodily injury or property loss caused by incorrect operation, please carefully read the Safety Information
Booklet before use.
This manual is applicable to the following product:
BD50Xi Digital Portable Radio.(X may represent2, 5, 6, 8)
Copyright Information
Hytera is the trademark or registered trademark of Hytera Communications Corporation Limited (the Company)
in People's Republic of China (PRC) and/or other countries or areas. The Company retains the ownership of its
trademarks and product names. All other trademarks and/or product names that may be used in this manual are
properties of their respective owners.
The product described in this manual may include the Company's computer programs stored in memory or other
media. Laws in PRC and/or other countries or areas protect the exclusive rights of the Company with respect to its
computer programs. The purchase of this product shall not be deemed to grant, either directly or by implication,
any rights to the purchaser regarding the Company's computer programs. The Company's computer programs may
not be copied, modified, distributed, decompiled, or reverse-engineered in any manner without the prior written
consent of the Company.
Disclaimer
The Company endeavors to achieve the accuracy and completeness of this manual, but no warranty of accuracy or
reliability is given. All the specifications and designs are subject to change without notice due to continuous
technology development. No part of this manual may be copied, modified, translated, or distributed in any manner
without the prior written consent of the Company.
We do not guarantee, for any particular purpose, the accuracy, validity, timeliness, legitimacy or completeness of
the Third Party products and contents involved in this manual.
If you have any suggestions or would like to receive more information, please visit our website at:
http://www.hytera.com.
FCC Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15
of FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates and can radiate radio frequency energy. If not installed and used in
accordance with the instructions, it may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. Verification of harmful interference by this
equipment to radio or television reception can be determined by turning it off and then on. The user is encouraged to
try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver.

Connect the equipment into an outlet on a different circuit to that of the receiver's outlet.

Consult the dealer or an experienced radio/TV technician for help.
Operation is subject to the following two conditions:

This device may not cause harmful interference., and

This device must accept any interference received, including interference that may cause undesired operation.
Note: Changes or modifications to this unit not expressly approved by the party responsible for compliance could
void the user's authority to operate the equipment.
Compliance with RF Exposure Standards
Hytera's radio complies with the following RF energy exposure standards and guidelines:

United States Federal Communications Commission, Code of Federal Regulations; 47 CFR § 1.1307, 1.1310
and 2.1093

American National Standards Institute (ANSI) / Institute of Electrical and Electronic Engineers
(IEEE) C95. 1:2005; Canada RSS102 Issue 5 March 2015

Institute of Electrical and Electronic Engineers (IEEE) C95.1:2005 Edition
RF Exposure Compliance and Control Guidelines and
Operating Instructions
To control your exposure and ensure compliance with the occupational/controlled environmental exposure limits,
always adhere to the following procedures.
Guidelines:

Do not remove the RF Exposure Label from the device.

User awareness instructions should accompany device when transferred to other users.

Do not use this device if the operational requirements described herein are not met.
Operating Instructions:

Transmit no more than the rated duty factor of 50% of the time. To transmit (talk), push the Push-To-Talk (PTT)
key. To receive calls, release the PTT key. Transmitting 50% of the time, or less, is important because the radio
generates measurable RF energy only when transmitting (in terms of measuring for standards compliance).

Keep the radio unit at least 2.5 cm away from the face. Keeping the radio at the proper distance is important as
RF exposure decreases with distance from the antenna. The antenna should be kept away from the face and
eyes.

When worn on the body, always place the radio in a Hytera-approved holder, holster, case, or body harness or
by use of the correct clip for this product. Use of non-approved accessories may result in exposure levels which
exceed the FCC's occupational/controlled environmental RF exposure limits.

Use of non-approved antennas, batteries, and accessories causes the radio to exceed the FCC RF exposure
guidelines.

Contact your local dealer for the optional accessories of the product.
1. Items in the Package
Please unpack carefully and check if all items listed below are received. If any item is missing or damaged, please
contact your dealer.
Item
Quantity (PCS)
Item
Quantity (PCS)
Radio
Antenna
Battery
Belt Clip
Charger
Strap
Power Adapter
Documentation Kit
2. Product Overview
2 1 Product Controls
Note
You can adapt your radio to use the SK as the shortcut to a radio feature.
2.2 LED Indication
LED Indicator
Radio Status
Flashes green
Being turned on.
Glows green
Receiving.
Glows red
Transmitting.
Flashes orange slowly
Scanning.
Call hang time: No voice is being transmitted or received on the channel during
Glows orange
a call. Within such a period, you can hold down the PTT key to speak.
3. Before Use
3.1 Attaching the Antenna
Caution
Do not hold the radio by its antenna, as it may reduce the radio performance and life span of the antenna.
Step 1 Place the antenna in its receptacle.
Step 2 Rotate the antenna clockwise.
3.2 Attaching the Battery
Step 1 Insert the top end of the battery into the top of the battery slot.
Step 2 Press the bottom end of the battery until the latch snaps into place.
Note
To remove the battery, make sure that the radio is turned off, and then slide the battery latch upwards to
unlock the battery.
3.3 Attaching the Belt Clip
Step 1
Unfasten the two screws on the back of the radio.
Step 2
Align the screw holes on the belt clip with those on the back of the radio.
Step 3
Tighten the screws.
3.4 Attaching the Accessories
Step 1 Loosen the screw on the accessory connector cover, and then open the cover.
Step 2 Plug the accessory into the accessory connector.
Step 3 Tighten the screw on the accessory plug.
3.5 Charging the Battery
Caution
Use the charger specified by the Company to charge the battery.
Be sure to charge the battery fully before initial use, since reduction of state of charge (SoC) may lead to low
battery alarm. You can charge the standalone battery or the radio with the battery attached. It is recommended that
your radio remain powered off during charging.
The LED indicator on the charger shows the charging status. For details, see the following table.
LED Indicator
Charging Status
Glows green
The battery is inserted incorrectly or fully charged.
Glows red
The battery is charging.
Glows orange
The battery is charged to 85% or above.
3.6 Checking the Battery Power
You can check the current battery power by holding down the Battery Power Indicator key programmed by your
dealer, and release the key to exit. The following table lists battery power indications:
LED Indicator
Alert Tone
Battery Power
Glows green
Three beeps
High
Glows orange
Two beeps
Medium
Glows red
One beep
Low
Flashes red
Low battery tone
Under the low battery threshold. Please
recharge or replace the battery.
4. Basic Operations
If you want to…
Do this…
Turn on the radio
Rotate the On-Off/Volume Control knob clockwise.
Turn off the radio
Rotate the On-Off/Volume Control knob counterclockwise.
Increase/Decrease the
Rotate the On-Off/Volume Control knob clockwise/counterclockwise after turning
volume
on the radio.
Select a channel
Rotate the Channel Selector knob.
5. Call Services
5.1 Call on Digital Channel
On the digital channel, you can initiate or respond to a group call or private call. A group call is a call from an
individual user to a group of users. A private call is a call from an individual user to another individual user.
5.1.1 Initiating a Call
Step 1 Select the required channel.
Step 2 Hold the radio vertically 2.5 to 5 cm from your mouth.
Step 3 Press and hold the PTT key and speak when the radio is in standby mode.
5.1.2 Receiving and Responding to a Call
When receiving a call, you can listen to it without any operation. You can hold down the PTT key to respond
within the preset time period.
5.2 Call on Analog Channel (Without Signaling)
A call on analog channel is from an individual user to all users on the channel. The operations are the same as the
call on digital channel.
6. Optional Features
The following features need to be programmed by your dealer. Please contact your dealer for detailed operations.
Type
Feature
Description
Allows you to select a zone. The radio supports up to 3 zones, with a
Zone
maximum of 16 channels per zone.
Power Level
Allows you to switch the transmit power level between high and low.
Allows the radio to scan all channels in the scan list programmed for the
Scan
current channel.
Allows you to initiate an emergency alarm or call at any time to ask for help
Emergency Alarm
in case of emergencies.
Radio
Feature
Voice Operated
Transmit (VOX)
Allows you to enjoy hands-free communication with the dedicated VOX
earpiece.
Busy Channel
Lockout
Prevents the radio from transmitting on a busy channel.
Time-out Timer
(TOT)
Terminates transmission when the preset time period expires.
Allows the radio to automatically enter the battery save mode when
Battery Save
detecting no activity or operation within a certain time period.
One Touch Call
Allows you to press one key to call the predefined private or group contact.
All Call
Allows you to initiate a call to all users on the channel.
TDMA Direct Mode
Allows the radio to operate on a channel with two time slots.
Squelch Off
Allows the radio's speaker to always keep unmuted.
Analog
Squelch Level
Allows you to adjust the squelch threshold required for the radio to unmute.
Feature
Monitor
Allows the radio to monitor activities on the channel.
CTCSS/CDCSS
Allows you to prevent unwanted calls on the same frequency.
Digital
Feature
7. Troubleshooting
Phenomena
Analysis
Solution
The battery may be installed
Remove and reattach the battery.
improperly.
The radio cannot be
turned on.
The battery power may run out.
Recharge or replace the battery.
The battery may suffer from poor
contact
caused
by
dirty
or
Clean the battery contacts or replace the battery.
damaged battery contacts.
During reception, the
voice
is
The battery voltage may be low.
Recharge or replace the battery.
The volume level may be low.
Increase the volume.
The antenna may be loose or may
Turn off the radio, and remove and reattach the
be installed incorrectly.
antenna.
The speaker may be blocked.
Clean the surface of the speaker.
weak,
intermittent or totally
inactive.
The frequency or signal strength
Verify your TX/RX frequency and signal strength
may be low in comparison to
You
communicate
other
cannot
are correct.
other members.
with
The channel type (digital or
Verify you are on the correct digital or analog
analog) may be set incorrectly.
channel.
group
members.
You may be too far away from
Move towards other members.
other members.
You may be interrupted by radios
Unknown voices or
Change the frequency, or adjust the squelch level.
using the same frequency.
noise is heard on the
channel.
The radio in analog mode may be
Set signaling for all radios operating at the same
set with no signaling.
frequency to avoid interference.
You are unable to
You may be too far away from
hear anyone because
other members.
of too much noise
You may be located in an
Move to an open and flat area, and restart the
and hiss.
unfavorable
radio and try contacting again.
Move towards other members.
position.
For
Phenomena
Analysis
example,
your
Solution
communication
may be blocked by high buildings
or blocked in an underground
area.
It could be the result of external
Stay away from equipment that may cause
disturbance
(such
as
interference.
electromagnetic interference).
If the above solutions cannot fix your problems, or you may have some other queries, please contact us or your
local dealer for more technical support.
8. Care and Cleaning
To guarantee optimal performance as well as a long service life of the product, please follow these tips.
Product Care
Do not pierce or scrape the product.
Keep the product far away from substances that can corrode the circuitry.
Do not hold the product by the antenna or earpiece cable.
Close the accessory connector cover when no accessory is in use.
Product Cleaning
Caution
Turn off the product and remove the battery before cleaning.
Clean up the dust and fine particles on the product's surface and charging piece with a clean and dry lint-free
cloth or a brush regularly.
Use neutral cleanser and a non-woven fabric to clean the keys, knobs and front case after long-time use. Do
not use chemical preparations such as stain removers, alcohol, sprays or oil preparations, so as to avoid surface
case damage.
Make sure the product is completely dry before use.
10
9. Optional Accessories
Caution
Use the accessories specified by Hytera only; otherwise, the Company will not be liable for any loss or
damage arising out of the use of any unauthorised accessories.
Contact your local dealer for the optional accessories used with the product.
11

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : Yes
Encryption                      : Standard V4.4 (128-bit)
User Access                     : Print, Extract, Print high-res
Author                          : l12029
Create Date                     : 2017:11:24 15:24:16+08:00
Modify Date                     : 2018:03:22 14:39:24-07:00
XMP Toolkit                     : Adobe XMP Core 5.2-c001 63.139439, 2010/09/27-13:37:26
Format                          : application/pdf
Creator                         : l12029
Title                           : Hytera BD55X Digital Portable Radio Owner's Manual R1.0
Creator Tool                    : pdfFactory Pro www.pdffactory.com
Metadata Date                   : 2018:03:22 14:39:24-07:00
Producer                        : pdfFactory Pro 5.20 (Windows 7 Ultimate x64 Chinese (Simplified))
Document ID                     : uuid:fa423912-8f7a-40a4-9fdf-6b9cd68800d0
Instance ID                     : uuid:fb48c12a-c30b-430e-a6fb-f1c1aeca4ce3
Page Layout                     : SinglePage
Page Count                      : 15

EXIF Metadata provided by EXIF.tools