Hytera Communications ESW01 Wireless Earset Kit User Manual

Hytera Communications Corporation Ltd. Wireless Earset Kit

User Manual

Download: Hytera Communications ESW01 Wireless Earset Kit User Manual
Mirror Download [FCC.gov]Hytera Communications ESW01 Wireless Earset Kit User Manual
Document ID2194421
Application IDoH+3s7tuzExWKmbHTN6+Aw==
Document DescriptionUser Manual
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize57.43kB (717889 bits)
Date Submitted2014-02-19 00:00:00
Date Available2014-02-19 00:00:00
Creation Date2017-10-23 22:23:45
Producing SoftwareGPL Ghostscript 9.18
Document Lastmod2017-10-23 22:23:45
Document TitleUser Manual
Document CreatorAdobe InDesign CS5 (7.0.2)

Items in the Package
Please unpack carefully and check that all
items listed below are received. If any item
is missing or damaged, please contact your
dealer.
No.
Name
Wireless Earpiece
Qty.
Earhook
Rubber Ear Cushion
Wireless Audio Adapter
Owner’s Manual
Function Overview
This exquisite, easy-wearing and lowpowered wireless earpiece is applicable to
Hytera portable radios with irmware version
of 5.05 and above.
With Hands-free function, you can have
convenient and safe communication within a
distance of 10 meters from the radio.
Yo u c a n u s e t h e w i r e l e s s e a r p i e c e t o
communicate regardless whether the radio
supports BT feature or not.
Product Overview
Wireless Earpiece
Wireless Audio Adapter
Speciication
Talk Time
>4 hours
D u s t/Wa t e r IP54
Protection
Class
●
●
Operation
Wireless Earpiece: -20˚C to
Temperature +60˚C
Wireless Audio Adapter:
-25˚C to +65˚C
Storage
Wireless Earpiece: -40˚C to
Temperature +75˚C
Wireless Audio Adapter:
-40˚C to +75˚C
Charging the Wireless
Earpiece
Note:
● To charge the wireless earpiece,
simply connect it to the adapter on
the radio. It is recommended to use
the high-capacity battery specified
●
by the Company to ensure the
optimal operation duration of the
radio.
Charging the wireless earpiece will
not affect the radio operation.
If the earpiece is idle for a long
time, charge it at least once within
three months.
If the LED indicator does not glow
red while the wireless earpiece is
being charged, charge the earpiece
f o r 10 t o 20 m i n u t e s f o r i t t o
recover to normal status.
Charge the wireless earpiece before use.
The LED indicator of the wireless earpiece
glows red during charging and glows blue
when the wireless earpiece is fully charged.
Also, the LED indicator indicates the pairing
and connection status. Please refer to LED
Indication for details.
1. Connect the wireless audio adapter to
the radio and secure the screw to fasten
it.
2. F i x t h e w i r e l e s s e a r p i e c e i n t o t h e
wireless audio adapter.
Make sure the wireless earpiece is fully
ixed into the adapter.
3. Turn on the radio.
Caution: The wireless earpiece can
be charged only when the radio is
powered on. Please ensure the radio is
powered on when charging the radio
(with battery attached) and the wireless
earpiece at the same time.
Pairing with and Connecting
to the Adapter
Before initial connection, the wireless
earpiece needs to be paired with the adapter
irst. Afterwards, the wireless earpiece can
connect to the adapter without pairing.
1. Disconnect the wireless earpiece from
other devices.
2. Connect the wireless earpiece with
the radio. (See Charging the Wireless
Earpiece for details)
3. Turn on the radio, and the wireless
earpiece will be powered up.
4. The wireless earpiece will be paired
with and connected to the adapter
automatically.
● Pairing mode: The LED indicator of the
wireless earpiece/adapter flashes red
and blue alternatively.
● Connection status: The LED indicator
lashes blue rapidly after the connection
is completed.
Wearing the Wireless
Earpiece
T i p s: T h e r e a r e t h r e e r u b b e r e a r
cushions with different sizes provided
with the wireless earpiece for your
comfortable wearing.
We a r t h e w i r e l e s s e a r p i e c e a f t e r t h e
connection is completed. Adjust the rubber
ear cushion to position it into your ear
canal, and adjust the earhook to secure the
earpiece.
Transmitting
After detaching the wireless earpiece from
the adapter, you can hold down the PTT key
on the wireless earpiece or the PTT key on
the adapter to make a call.
Powering On/Off
The wireless earpiece will give ring indication
(you can hear it only when you are wearing
the wireless earpiece) upon power-on/off.
Powering On
● Automatic power-on: When attached
t o t h e r a d i o v i a t h e a d a p t e r, t h e
wireless earpiece will be powered on
automatically when the radio is turned
on.
● Manual power-on: When the wireless
earpiece is not attached with the
adapter, you can power on the wireless
earpiece by long pressing the PTT key
on it. The adapter can be powered on by
turning on the radio only.
The LED indicator lashes after the wireless
earpiece is powered on. Please refer to LED
Indication for indication details.
Powering Off
To power off the adapter, turn off the radio.
To power off the wireless earpiece, long
press the PTT key after the BT connection is
disconnected (the LED indicator lashes blue
slowly). The LED indicator goes out when
the wireless earpiece is powered off.
LED Indication
Caution:
● When the wireless earpiece is being
charged on the adapter, the LED
indicator glows red when charging
is in process and glows blue
when the wireless earpiece is fully
charged. In this case, the following
indications are not applicable.
Yo u c a n i d e n t i f y t h e s t a t u s of
the wireless earpiece via the LED
indication of the adapter. You can
●
also detach the wireless earpiece
from the adapter to identify the
status of the wireless earpiece.
The following indications do not
include the charging indications.
LED Indication
Earpiece Status
The LED indicator
Pairing
lashes red and blue
alternatively.
The LED Indicator
glows red.
Transmitting
The LED indicator
lashes red.
Low battery power
(applicable to
wireless earpiece
only)
The LED indicator
lashes blue twice
rapidly.
Connected with no
voice
The LED indicator
lashes blue once
rapidly.
Connected with
voice
The LED indicator
lashes blue slowly.
Paired but not
connected
Troubleshooting
Phenomena Analysis
Solution
The LED
indicator
does not
glow red
while the
wireless
earpiece
is being
charged.
The battery
power of
the wireless
earpiece
may run out
completely.
Charge the
wireless
earpiece
for 10 to 20
minutes.
The wireless
earpiece
cannot pair
with the
adapter.
The wireless
earpiece or
the adapter
may pair
with other BT
devices.
Move away
from other BT
devices and
restart the
radio to pair
the wireless
earpiece with
the adapter.
FCC Statement
Changes or modifications not expressly approved by the party responsible for compliance could
void the user’s authority to operate the equipment.
This device complies with part 15 of FCC Rules. Operation is subject to the following two
conditions:
(1)
This device may not cause harmful interference, and
(2)
This device must accept any interference received, including interference that may
cause undesired operation
Note: This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates,
uses and can radiate radio frequency energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications. However, there is
no guarantee that interference will not occur in a particular installation. I f this equipment does
cause harmful interference to radio or television reception, which can be determined by turning
the equipment off and on, the user is encouraged to try to correct the interference by one or
more of the following measures:
—Reorient or relocate the receiving antenna.
—I ncrease the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
—Consult the dealer or an experienced radio/ TV technician for help.
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled
environment.
This transmitter must not be co-located or operating in conjunction with any other antenna or
transmitter.
IC statement
This device complies with Industry Canada licence-exempt RSS standard(s). Operation is
subject
to the following two conditions:
(1) This device may not cause interference, and
(2) This device must accept any interference, including interference that may cause
undesired operation of the Device.
The device has been tested and compliance with SAR limits, users can obtain Canadian
information on RF exposure and compliance
Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils
radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes :
(1) l'appareil nedoit pas produire de brouillage, et
(2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le
brouillage est susceptible d'en compromettre le fonctionnement.
Après examen de ce matériel aux conformité aux limites DAS et/ou aux limites d’intensité
de champ RF, les utilisateurs peuvent sur l’exposition aux radiofréquences et la
conformité and compliance d’acquérir les informations correspondantes
Under Industry Canada regulations, this radio transmitter may only operate using an
antenna of a type and maximum (or lesser) gain approved for the transmitter by
Industry Canada. To reduce potential radio interference to other users, the antenna
type and its gain should be so chosen that the equivalent isotropically radiated power
(e.i.r.p.) is not more than that necessary for successful communication.
Conformément à la réglementation d'Industrie Canada, le présent émetteur radio peut
fonctionner avec une antenne d'un type et d'un gain maximal (ou inférieur) approuvé
pour l'émetteur par Industrie Canada. Dans le but de réduire les risques de
brouillage radioélectrique à l'intention des autres utilisateurs, il faut choisir le type
d'antenne et son gain de sorte que la puissance isotrope rayonnée équivalente (p.i.r.e.)
ne dépasse pas l'intensité nécessaire à l'établissement d'une communication
satisfaisante.

Source Exif Data:
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.7
Linearized                      : Yes
Encryption                      : Standard V4.4 (128-bit)
User Access                     : Print, Extract, Print high-res
Create Date                     : 2014:01:17 11:54:35+08:00
Creator                         : Adobe InDesign CS5 (7.0.2)
Modify Date                     : 2014:02:19 18:33:50-08:00
Has XFA                         : No
Tagged PDF                      : No
XMP Toolkit                     : Adobe XMP Core 5.2-c001 63.139439, 2010/09/27-13:37:26
Metadata Date                   : 2014:02:19 18:33:50-08:00
Creator Tool                    : Adobe InDesign CS5 (7.0.2)
Page Image Page Number          : 1, 2
Page Image Format               : JPEG, JPEG
Page Image Width                : 256, 256
Page Image Height               : 256, 256
Page Image                      : (Binary data 9146 bytes, use -b option to extract), (Binary data 6929 bytes, use -b option to extract)
Instance ID                     : uuid:055ebf70-4772-48c6-b397-47f495c22cef
Document ID                     : xmp.did:D47D95E50E7FE311A3E9966B776B1134
Original Document ID            : xmp.did:D47D95E50E7FE311A3E9966B776B1134
Rendition Class                 : proof:pdf
History Action                  : created, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved
History Instance ID             : xmp.iid:D47D95E50E7FE311A3E9966B776B1134, xmp.iid:D57D95E50E7FE311A3E9966B776B1134, xmp.iid:D67D95E50E7FE311A3E9966B776B1134, xmp.iid:D77D95E50E7FE311A3E9966B776B1134, xmp.iid:D87D95E50E7FE311A3E9966B776B1134, xmp.iid:D97D95E50E7FE311A3E9966B776B1134, xmp.iid:DA7D95E50E7FE311A3E9966B776B1134, xmp.iid:DB7D95E50E7FE311A3E9966B776B1134, xmp.iid:DC7D95E50E7FE311A3E9966B776B1134, xmp.iid:9EAF8A53127FE311A3E9966B776B1134, xmp.iid:9FAF8A53127FE311A3E9966B776B1134, xmp.iid:A0AF8A53127FE311A3E9966B776B1134, xmp.iid:A1AF8A53127FE311A3E9966B776B1134, xmp.iid:A2AF8A53127FE311A3E9966B776B1134, xmp.iid:A3AF8A53127FE311A3E9966B776B1134, xmp.iid:A4AF8A53127FE311A3E9966B776B1134, xmp.iid:A5AF8A53127FE311A3E9966B776B1134, xmp.iid:A6AF8A53127FE311A3E9966B776B1134, xmp.iid:A7AF8A53127FE311A3E9966B776B1134, xmp.iid:A8AF8A53127FE311A3E9966B776B1134, xmp.iid:B7F6D452167FE311A3E9966B776B1134, xmp.iid:B8F6D452167FE311A3E9966B776B1134, xmp.iid:B9F6D452167FE311A3E9966B776B1134, xmp.iid:BAF6D452167FE311A3E9966B776B1134, xmp.iid:BBF6D452167FE311A3E9966B776B1134, xmp.iid:BCF6D452167FE311A3E9966B776B1134, xmp.iid:BDF6D452167FE311A3E9966B776B1134, xmp.iid:BEF6D452167FE311A3E9966B776B1134, xmp.iid:BFF6D452167FE311A3E9966B776B1134, xmp.iid:C0F6D452167FE311A3E9966B776B1134, xmp.iid:7FA982761C7FE311A3E9966B776B1134, xmp.iid:80A982761C7FE311A3E9966B776B1134, xmp.iid:81A982761C7FE311A3E9966B776B1134, xmp.iid:82A982761C7FE311A3E9966B776B1134
History When                    : 2014:01:17 08:33:18+08:00, 2014:01:17 08:34:06+08:00, 2014:01:17 08:34:06+08:00, 2014:01:17 08:42:43+08:00, 2014:01:17 08:44:16+08:00, 2014:01:17 08:50:59+08:00, 2014:01:17 08:52:08+08:00, 2014:01:17 08:54:09+08:00, 2014:01:17 08:55:49+08:00, 2014:01:17 08:57:23+08:00, 2014:01:17 08:57:41+08:00, 2014:01:17 08:59:24+08:00, 2014:01:17 09:02:49+08:00, 2014:01:17 09:05:35+08:00, 2014:01:17 09:07:47+08:00, 2014:01:17 09:14:03+08:00, 2014:01:17 09:16:15+08:00, 2014:01:17 09:16:22+08:00, 2014:01:17 09:20:36+08:00, 2014:01:17 09:23:23+08:00, 2014:01:17 09:28:08+08:00, 2014:01:17 09:37:15+08:00, 2014:01:17 09:42:48+08:00, 2014:01:17 09:52:51+08:00, 2014:01:17 09:53:47+08:00, 2014:01:17 09:55:01+08:00, 2014:01:17 10:00:40+08:00, 2014:01:17 10:02:49+08:00, 2014:01:17 10:06:02+08:00, 2014:01:17 10:08:09+08:00, 2014:01:17 10:09:57+08:00, 2014:01:17 10:10:39+08:00, 2014:01:17 10:12:13+08:00, 2014:01:17 10:12:29+08:00
History Software Agent          : Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0
History Changed                 : /;/metadata, /metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata
Doc Change Count                : 711
Format                          : application/pdf
Producer                        : Adobe PDF Library 9.9
Trapped                         : False
Page Layout                     : OneColumn
Page Count                      : 10
EXIF Metadata provided by EXIF.tools
FCC ID Filing: YAMESW01

Navigation menu