Hytera Communications PD70XG-U1 Digital Portable Radio User Manual

Hytera Communications Corporation Ltd. Digital Portable Radio Users Manual

Contents

Users Manual

Preface Thank you for purchasing Hytera DMR Digital Portable Radio. As a product built to the DMR standard, it is endowed with ergonomic design, all-round digital functions and remarkable quality to refresh your experience and enable you to be responsive to emergent situations.   To derive optimum performance from your product, please read this manual and the supplied Safety Information Booklet carefully before use.    This manual is applicable to the following model: PD70X PD70XG
                                                                                                           Instructional Icons   The following icons are available through this manual: Alert Icons    Caution: indicates situations that could cause damage to your product.    Note: indicates tips that can help you make better use of your product.   Function Icons   : indicates functions that are available on digital channel only.   : indicates functions that are available on analog channel only.   Functions marked with no function icons are available on both analog and digital channels.  Term Explanation   Key Operation   Short press: to press a key and release it quickly.   Long press: to press a key and remain holding it down for a predefined period (2 seconds by default).   Hold down: to press a key and remain holding it down.   Private Call Private Cal is a call initiated by a single user to another user.   Group Call Group Call is a call initiated by a single user to a group.   All Call   All Call is a call initiated by a single user to all the other users on a channel.   Squelch This technology can remove excessive background noises, improving your communication quality.          1
                                                                                                             2Copyright Information Hytera and HYT are trademarks or registered trademarks of Hytera Communications Co., Ltd. (“Hytera”) in PRC and/or other countries or areas. Hytera retains the ownership of its trademarks and product names. All other trademarks and/or product names that may be used in this manual are properties of their respective owners.   The Hytera product described in this manual may include Hytera computer programs stored in memory or other media. Laws in PRC and/or other countries or areas protect the exclusive rights of Hytera with respect to its computer programs. The purchase of this product shall not be deemed to grant, either directly or by implication, any rights to the purchaser with respect to Hytera computer programs. Any Hytera computer programs may not be copied, modified, distributed, decompiled, or reverse-engineered in any manner without the prior written consent of Hytera.   The AMBE+2TM voice coding technology embodied in this product is protected by intellectual property rights including patent rights, copyrights and trade secrets of Digital Voice Systems, Inc. This voice coding technology is licensed solely for use within this product. The user of this technology is explicitly prohibited from attempting to decompile, reverse engineer, or disassemble the Object Code or in any other way convert the Object Code into a human readable form.     U.S. Patent Nos. #6,912,495 B2, #6,199,037 B1, #5,870,405, #5,826,222, #5,754,974, #5,701,390, #5,715,365, #5,649,050, #5,630,011, #5,581,656, #5,517,511, #5,491,772, #5,247,579, #5,226,084 and #5,195,166.  Disclaimer  Hytera endeavors to achieve the accuracy and completeness of this manual, but no warranty of accuracy or reliability is given. All the specifications and designs are subject to change without prior notice due to continuous technology development. No part of this manual may be copied, modified, translated, or distributed in any manner without the express written permission of Hytera.   If you have any suggestions or would like to learn more details, please visit our website at: http://www.hytera.cn.
RF Energy Exposure Compliance ●  Your radio is designed and tested to comply with a number of national and international standards and guidelines (listed below) regarding human exposure to radio frequency electromagnetic energy. This radio complies with the IEEE and ICNIRP exposure limits for occupational/controlled RF exposure environment at operating duty factors of up to 50% transmitting and is authorized by the FCC for occupational use only. In terms of measuring RF energy for compliance with the FCC exposure guidelines, your radio radiates measurable RF energy only while it is transmitting (during talking), not when it is receiving (listening) or in standby mode. ●    The device complies with SAR and/or RF field strength limits of RSS-102 requirement。  Your radio complies with the following of RF energy exposure standards and guidelines  ●  United States Federal Communications Commission, Code of Federal Regulations; 47CFR part 2 sub-part J ●  American National Standards Institute (ANSI)/Institute of Electrical and Electronic Engineers (IEEE) C95. 1-1992 ●  Institute of Electrical and Electronic Engineers (IEEE) C95. 1-1999 Edition ●  International Commission on Non-Ionizing Radiation Protection (ICNIRP) 1998  Operational Instructions and Training Guidelines  ●  To ensure optimal performance and compliance with the occupational/controlled environment RF energy exposure limits in the above standards and guidelines, users should transmit no more than 50% of the time and always adhere to the following procedures; and should transmit no more than 50% of the time, although the hardware support transmission up to 100% of the time in analog mode and up to 50% in digital mode. ●  Gain of antenna must not exceed 3.0dBi.    Transmit and Receive  To transmit (talk), push the Push-To-Talk (PTT) key; to receive, release the PTT key.  CANADIAN REPRESENTATIVE Information:  Contact Name: Melanie Manson Address: 1211 Gorham Street Unit 3 New Market Ontario L4C 9S7 Canada
EU Regulatory Conformance  The equipment is in compliance with the essential requirements and other relevant provisions of the Directive 1999/5/EC.   Note: The above information is applicable to EU countries only. FCC Licensing Information Part 15 Compliance   This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:    Reorient or relocate the receiving antenna.  Increase the separation between the equipment and receiver.  Connect the equipment into an outlet on a circuit different from that to which the receiver is                                 connected.  Consult the dealer or an experienced radio/TV technician for help.  FCC Licensing Requirements A license from Federal Communications Commission is required prior to use. Your dealer will program each radio with your authorized frequencies, signaling codes, etc., and will be there to meet your communications needs as your system expands. Contact your dealer for more information.
                                                                                                           Contents Checking Items in the Package................................................................................................................. 7 Product Overview ...................................................................................................................................... 8 Product Controls..............................................................................................................................8 Programmable Keys ........................................................................................................................8 Before Use .............................................................................................................................................. 10 Charging the Battery......................................................................................................................10 Assembling the Accessories ..........................................................................................................11 Status Indication ...................................................................................................................................... 13 LED Indicator.................................................................................................................................13 Basic Operations ..................................................................................................................................... 14 Turning the Radio On/Off...............................................................................................................14 Adjusting the Volume.....................................................................................................................14 Selecting a Zone............................................................................................................................14 Selecting a Channel.......................................................................................................................14 Switching the Channel Mode .........................................................................................................14 Call .......................................................................................................................................................... 15 Private Call  .........................................................................................................................15 Group Call  ...........................................................................................................................15 All Call  .................................................................................................................................15 Calls on Analog Channels  ...................................................................................................16 Functions and Operations ....................................................................................................................... 17 Adjust Power Level........................................................................................................................17 Scan ..............................................................................................................................................17 Talk Around....................................................................................................................................18 Monitor .................................................................................................................................18 Squelch Off  ........................................................................................................................18 Emergency ....................................................................................................................................18 Adjust Squelch Level  ..........................................................................................................22 Battery Power Indicator .................................................................................................................22 Man Down (optional)......................................................................................................................22 Scrambler /Encrypt .......................................................................................................23 Busy Channel Lockout...................................................................................................................23   5
                                                                                                           Time-out Timer (TOT) ....................................................................................................................23 Pseudo Trunking  .................................................................................................................23 MIC AGC .......................................................................................................................................24 Troubleshooting....................................................................................................................................... 25 Care and Cleaning .................................................................................................................................. 27 Optional Accessories............................................................................................................................... 28                          6
                                                                                                           Checking Items in the Package Please unpack carefully and check that all items listed below are received. If any item is missing or damaged, please contact your dealer.                                                Battery                      Charger                           Power Adapter                                                             Antenna                           Belt Clip                                   Strap                                                       Owner’s Manual/ Safety Information Booklet                             Radio Unit  Note: The antenna may vary with different frequency bands. And the frequency band is marked on the label of antenna; if not, please refer to the label on the radio unit for frequency band information.       7
                                                                                                           Product Overview Product Controls     8○1  SK1 (Side Key 1) ○2  PTT Key ○3  SK2 (Side Key 2)   ○4   TK (Top Key)   ○5  Channel Selector Knob   ○6  Speaker ○7  LED Indicator  ○8 Radio On-Off/Volume Control Knob ○10  Accessory Jack ○11  Battery Latch ○12  Antenna  ○9  Microphone    ○13  Belt Clip  ○14  Battery  Programmable Keys For enhanced convenience, you may request your dealer to program the keys SK1,  SK2, and TK as shortcuts to the functions listed below:   No.   Shortcut Keys Description 1 Zone Up To select a desired zone quickly 2 Zone Down 3  Adjust Power Level To adjust power level quickly
                                                                                                           4  Talk Around   To directly communicate with other radios Monitor  5  To adjust the condition for incoming signal match Monitor Momentary   6   97  Squelch Off   To always unmute speaker no matter whether carrier is present or not 8  Squelch Off Momentary 9  Scan   To receive signals on other channels To temporarily ignore unwanted channel activity 10  Nuisance Temporary Delete   11  Emergency To summon help in emergent situations   To temporarily adjust the squelch threshold required for the radio to unmute Adjust Squelch Level   12 13  Battery Power Indicator To indicate the battery strength 14  Man Down To activate Emergency in the case that the radio is positioned aslant for a preset time period due to an unexpected situation Scrambler /Encrypt15  To encrypt your voice so as to guarantee privacy of your communication  Note:    (1) Long and short press of a key can be assigned with different functions by your dealer.   (2) The TK is programmed as the Emergency key by default, and is programmable by your dealer.
                                                                                                           Before Use Charging the Battery Use only the charger and battery specified by Hytera. Charger LED can indicate the charging process.   Charge Diagram  Procedures 1.  Connect the power adapter to AC source. See arrow  ①. 2.  Plug the power adapter into the rear socket of the charger. See arrow  ②. 3.  Place the radio with the battery attached, or the battery alone, into the charger. 4.  The charging process initiates when LED glows red, and is completed when LED glows green.  Note: To achieve optimal battery performance, please charge the battery for 5 hours before initial use. Charge Indicator  LED Indicator Charge Status   10
                                                                                                           Red LED flashes slowly. Standby (no load) Red LED glows. Charging   Orange LED glows. 90% charged Green LED glows. Fully charged Red LED flashes rapidly. Failure   Caution: Be sure to read the Safety Information Booklet, to get necessary safety information.    Assembling the Accessories Attaching the Antenna   Turn the antenna clockwise to fasten it.    To remove the antenna, rotate it counter-clockwise.   Attaching the Battery 1.  Insert the battery into top of the radio. See arrow  ○1. 2.  Slightly press the bottom of the battery until a click is heard. See arrow  ○2.     11
                                                                                                            To remove the battery, turn off the radio first. Then slide the battery latch upwards to unlock the battery.   Attaching the Belt Clip   1.  Remove the screws.   2.  Align the screw holes on the belt clip with those on the radio’s body, and then tighten the screws.    To remove the belt clip, loosen the screws.    Attaching the Audio Accessory/Programming Cable 1.  Open the accessory jack cover as the arrow shown.   2.  Align the plug with the accessory jack.   3.  Tighten the screw on the plug.                     To remove accessories, loosen the screw.    Caution: When you are using an external accessory, waterproof performance of the radio may get affected.     12
                                                                                                             13Status Indication LED Indicator   The top LED indicator will help you easily identify the current radio status.   LED Indicator   Radio Status LED flashes green. Powering on LED glows red.   Transmitting LED glows green.   Receiving LED flashes green slowly.   Scanning LED flashes orange rapidly.   Emergency LED glows orange.   Call ended (within the preset time period)
                                                                                                             14Basic Operations Turning the Radio On/Off Rotate the Radio On-Off/Volume Control knob clockwise/counter-clockwise until a click is heard to turn the radio on/off.    Adjusting the Volume After turning the radio on, rotate the Radio On-Off/Volume Control knob clockwise to increase the call volume, or counter-clockwise to decrease it.  Selecting a Zone A zone is a group of channels exhibiting the same property, and is programmed by your dealer. The radio supports 3 zones: Zone 1, Zone 2 and Zone 3. Each zone contains 16 channels at most.   You may quickly toggle to your desired zone by pressing the programmed Zone Up or Zone Down key. In the process, you will hear one alert tone for Zone 1, two alert tones for Zone 2 and three alert tones for Zone 3.    Selecting a Channel   Rotate the Channel Selector knob to select a desired channel.  Switching the Channel Mode Each channel can be programmed as either analog channel or digital channel. If the current zone includes both analog and digital channels, you may quickly switch between digital and analog through the Channel Selector knob.
                                                                                                           Call To ensure optimal volume of the receiving radio, hold the radio approximately 2.5 to 5 centimeters away from your mouth.   Private Call   Transmitting a Private Call In standby mode, hold down the PTT key to transmit a Private Call to the Private Call contact preset for the current channel.    Note: Your dealer may preset a contact for each digital channel. The preset contact could be a Private Call contact, a Group Call contact or an All Call contact.   Receiving and Responding to a Private Call When a Private Call is received, you can listen to it without any operation, and you may hold down the PTT key within the preset time period to call back.  Group Call   Transmitting a Group Call In standby mode, hold down the PTT key to transmit a Group Call to the Group Call contact preset for the current channel.   Receiving and Responding to a Group Call When a Group Call is received, you can listen to it without any operation, and you may hold down the PTT key within the preset time period to call back.  All Call   Transmitting an All Call In standby mode, hold down the PTT key to transmit an All Call to the All Call contact preset for the current channel.    Note: You can transmit an All Call only when it is enabled by your dealer. Receiving an All Call When an All Call is received, you can listen to it without any operation.     15
                                                                                                            Note: You cannot respond to an All Call.    Calls on Analog Channels   To transmit on an analog channel, hold down the PTT and speak into the microphone. To receive, release the PTT key.                         16
                                                                                                           Functions and Operations Adjust Power Level With this feature, you may switch power levels quickly. Generally, we recommend you to adopt low power for battery saving. However, if you cannot communicate with radios located at a distant place with low power, please select high power. Operation:  Press the programmed Adjust Power Level key to switch between high power and low power (from low power to high power: a high-pitched tone sounds; from high power to low power: a low-pitched tone sounds).   Scan  This feature allows you to listen to communication activities on other channels so that you can keep a close track of your team members.   Operation:   1.  To enable the feature, press the programmed Scan key in standby mode (a high-pitched tone sounds); or Switch to a channel on which the feature “Auto Scan” is enabled via the programming software. 2.  After the feature is enabled, your radio will scan according to the scan list set for the channel on which scanning starts. The scanning process is as follows:   z  During scanning, the LED flashes orange. z  When activities are detected on a channel, the radio will stay on the channel to receive current activities, and the LED glows green. z  If you don’t want to hear activities on the channel, press the programmed Nuisance Temporary Delete key to remove the channel from the scan list temporarily.   z  If you want to continue staying on the channel, press the programmed Monitor or Squelch Off key during scan stay.   3.  To exit the scanning process, press the programmed Scan key again (a low-pitched tone sounds).    17
                                                                                                           Talk Around   This feature allows you to continue communication even when the repeater malfunctions, or when your radio is out of the repeater’s range but within the coverage range of other radios.   Operation:   Press the programmed Talk Around key to enable the feature (a high-pitched tone sounds). To disable the feature, press this key again (a low-pitched tone sounds).    Monitor  To adjust match conditions for signal receiving, you can enable the feature “Monitor”. Operation:    Press the programmed Monitor key to enable the feature (a high-pitched tone sounds). To disable the feature, press this key again (a low-pitched tone sounds).     Hold down the programmed Monitor Momentary key to enable the feature (a high-pitched tone sounds). To disable the feature, release this key (a low-pitched tone sounds).    Squelch Off   If the feature “Squelch Off” is enabled, the speaker will keep unmuted no matter whether carrier is present.   Operation:     Press the programmed Squelch Off key to enable the feature, and the radio sounds background noise (a high-pitched tone sounds). To disable the feature, press this key again (a low-pitched tone sounds).   Hold down the programmed Squelch Off Momentary key to enable the feature, and the radio sounds background noise (a high-pitched tone sounds). To disable the feature, release this key (a low-pitched tone sounds).  Emergency   18In case of an emergency, you can use the feature to ask for help from your companion or control center.   The Emergency process has the highest priority. You can make emergency operation even when your
                                                                                                           radio is transmitting or receiving.   To enable the feature on a channel, an emergency system must be assigned to the channel via the programming software. In addition, the Emergency type, Emergency ID type and Emergency mode are settable via the programming software.   Emergency Type For each Emergency mode, there are four Emergency types available. You can select one of them via your dealer:   Emergency Type Description Siren Only In Emergency mode, the radio will sound shrill alarm tone.   Regular In Emergency mode, the radio will give audible and visible indication.   Silent In Emergency mode, the radio won't give any audible or visible indication.   Silent with Voice In Emergency mode, the radio won’t give any audible or visible indication, but will receive voice ACK from the companion or control center automatically.    Emergency ID Type   Your radio supports two Emergency ID types. You can select one of them via your dealer:   Emergency ID Type Description None No signaling is used when the radio sends alarm information. HDC1200 HDC1200 signaling is used when the radio sends alarm information.  Emergency Mode Your radio supports three Emergency modes. You can select one of them via your dealer (Note: For the following operation methods, we take the “Regular” type as an example). Emergency Mode Description Alarm   In this mode, you can send alarm information to your   19
                                                                                                           companion or control center by pressing the programmed Emergency key, but you cannot talk with them. Alarm with Call   In this mode, you can send alarm information by pressing the programmed  Emergency key. When the alarm tone disappears (None) or after the Emergency ID is sent (HDC1200), you can speak into the microphone, allowing your voice and background noise to be transmitted automatically (you do not need to hold down the PTT key). Call Only In this mode, press the programmed Emergency key to go to the Revert Channel, and speak into the microphone, allowing your voice and background noise to be transmitted automatically (you do not need to hold down the PTT key).    Operation Methods for Analog Emergency   Alarm (None & HDC1200) Operation: Press the programmed Emergency key to send alarm information, and the LED glows red. (None: If “Local Emergency Alarm" is enabled via the programming software, an alarm tone will sound.) The following methods are available for you to exit the Emergency mode: 1.  Once the Alarm Cycles expire, the radio will exit the Emergency mode automatically.   2.  Long press the programmed Emergency key. 3.  Hold down the PTT key. The radio will transmit on the channel on which the radio operates before entering the Emergency mode. (HDC1200)   Alarm with Call (None & HDC1200) Operation:  1. Press the programmed Emergency key to send alarm information, and the LED glows red. (None: If “Local Emergency Alarm" is enabled via the programming software, an alarm tone will sound.) 2.  When the alarm tone disappears (None) or after the Emergency ID is sent (HDC1200), you can speak into the microphone to make an emergency call.   3.  When the LED flashes orange, your radio is receiving.     20
                                                                                                           Two methods are available for you to exit the Emergency mode: 1.  After the preset Alarm Cycles and Voice Cycles expire, the radio will exit the Emergency mode automatically. (None) 2.  Long press the programmed Emergency key.   Call Only (HDC1200) Operation:   1.  Press the programmed Emergency key to go to the Revert Channel, and the LED glows red.   2.  If the feature “Alarm with Call to Follow” is enabled, you can speak into the microphone to make an emergency call when the LED glows red.   3.  When the LED flashes orange, your radio is receiving.   To exit the Emergency mode, long press the programmed Emergency key. Note: Your dealer may set the number of alarm cycles and alarm duration (None),  number of polite retries and impolite retries (HDC1200), number of voice cycles, duration of each transmission and TX interval.    Operation Method for Digital Emergency    Call Only Operation:   1.  Press the programmed Emergency key to go to the Revert Channel.   2.  If the feature “Alarm with Call to Follow” is enabled, you can speak into the microphone to make an emergency call when the LED glows red.   3.  When the LED flashes orange, your radio is receiving.   If the preset Voice Cycles expire, you can hold down the PTT key to make the emergency call again (the LED glows red). After the emergency call is transmitted, please release the PTT key to receive.   To exit the Emergency mode, long press the programmed Emergency key. Note: Your dealer may set the number of voice cycles, duration of each transmission and TX interval.     21
                                                                                                           Adjust Squelch Level   This feature allows you to adjust the squelch threshold required for the radio to unmute.   Generally, “Tight” is used in high noise environment. It requires stronger signal for the radio to unmute.   If the squelch level is set to Open, the speaker will keep unmuted irrespective of the satisfaction of decoding conditions.   Operation:  Press the programmed Adjust Squelch Level key to switch among Tight, Open and Normal (from Tight to Open, a low-pitched tone and background sound are heard; from Open to Normal, a high-pitched tone is heard and the background sound disappears; from Normal to Tight, a high-pitched tone is heard).  Battery Power Indicator This feature allows you to know the current battery strength.   Operation:   Hold down the programmed Battery Strength Indicator key, and the radio will give a specific indication to represent the current battery strength. Release the key to exit.   Indication Battery Strength Green LED glows. HighOrange LED glows. MediumRed LED glows. LowRed LED glows and the low battery alert sounds.Insufficient Man Down (optional) With this feature, your radio will alarm automatically to summon help from your companion if it is positioned aslant for a certain time period.   Operation:   1.  To enable the feature,   z  Press the programmed Man Down key (a high-pitched tone sounds); or z  Turn on the radio if the feature is enabled via the programming software.   2. Your radio will sound a pre-alert tone if it is positioned aslant for a preset time period, and will enter the Emergency mode if you do not place it vertically within such time period. To exit the Emergency mode, please place it upright. 3. To disable the feature,   z  Press the programmed Man Down key (a low-pitched tone sounds).    22
                                                                                                           Scrambler /Encrypt  The Scrambler/Encrypt feature can encrypt your audio signals to prevent eavesdropping. Thus privacy of your communication is guaranteed.   Operation:   z Press the programmed Scrambler/Encrypt key to enable Scrambler or Encrypt on the current channel (a high-pitched tone sounds); press the key again to disable the feature (a low-pitched tone sounds).   z If the Scrambler/Encrypt feature is enabled for a channel via the programming software, switch to the channel to enable the feature, or exit the channel to disable the feature.    Busy Channel Lockout If enabled via the programming software, this feature can prevent your radio interfering with other transmitting radios on the same channel. If you hold down the PTT key while the channel is in use, your radio will keep beeping, alerting you to transmission prohibition. To stop beeping, please release the PTT key. When the channel is free, you can press and hold down the PTT key to transmit.    Time-out Timer (TOT)   The purpose of TOT is to prevent any user from occupying a channel for an extended period. If the preset time expires, the radio will automatically terminate transmission and keep beeping. To stop beeping, please release the PTT key. You must wait for a certain time period (preset by your dealer) to initiate another transmission.   If the pre-alert function is set by your dealer, your radio will alert you to the TOT expiration in advance.  Note: This feature is null in Emergency mode.    Pseudo Trunking   This feature can be enabled via the programming software. If your radio operates on a channel with this feature enabled and one time slot is already occupied, it can transmit and receive on the other free time slot, allowing you to communicate timely under emergent situations.    23
                                                                                                             24MIC AGC If enabled via the programming software, your radio will process the audio signals during transmission, providing improved audio for the receiving radio.
                                                                                                             25Troubleshooting Phenomena   Analysis   Solution   The battery may be improperly installed.   Remove the battery and attach it again.   The battery may run out.   Recharge or replace the battery.   The radio can not be powered on.   The battery may suffer from poor contact caused by dirtied or damaged battery contacts.   Clean the battery contacts. If the problem can not be solved, contact your dealer or authorized service center for inspection and repair.   The battery strength may be too low.   Recharge or replace the battery.   The volume may be set to a low level.   Increase the volume.   The antenna may get loose or may be improperly installed.   Power off the radio, and re-install the antenna.   During receiving signals, the voice is weak, discontinuous or totally inactive.   The speaker may be blocked or damaged.   Clean surface of the speaker. If the problem can not be solved, contact your dealer or authorized service center for inspection and repair.   The frequency or signaling may be inconsistent with that of other members.   Set your TX/RX frequency and signaling to the same as that of other members.   The channel type (digital/analog) may be set inconsistently.   Make sure all members are on the same digital/analog channel.   You can not communicate with other members.   You may be too far away from the group members.   Move towards other members.
                                                                                                             26You may be interrupted by radios using the same frequency.   Change the frequency, or adjust the squelch level.   Irrelevant communication or noise is heard on the channel.   The radio may be set with no signaling.   Set signaling for all member radios to avoid interference at the same frequency.   You may be too far away from other members.   Move towards other members.   You may be at an unfavorable position. For example, your communication may be blocked by high buildings or frustrated in the underground areas.   Move to an open and flat area, and restart the radio.   The noise is too loud.   You may suffer from external disturbance (such as electromagnetic interference).   Stay away from equipment that may cause interference.   The GPS cannot locate your position. No GPS signal is received. Move to an open and flat area, and restart the radio.    If the above solutions can not fix your problems, or you may have some other queries, please contact us or your local dealer for more technical support.
                                                                                                           Care and Cleaning To guarantee optimal performance as well as a long service life of the product, please follow the tips below.  Product Care   Do not pierce or scrape the product with any edged instruments or hard objects.     Keep the product far away from substances that can corrode the circuit.     Do not hold the product by its antenna or earpiece cable directly.     Attach the accessory jack cover when the product is not in use.   Product Cleaning   Clean up the dust and fine particles on the product surface and charging piece with a clean and dry lint-free cloth or a brush regularly.     Use neutral cleanser and a non-woven fabric to clean the keys, control knobs and front case long-time use. Do not use chemical preparations such as stain removers, alcohol, sprays or oil preparations, so as to avoid surface case damage. Make sure the product is completely dry before use.   Caution: Power off and remove the battery before cleaning.                   27
                                                                                                           Optional Accessories The following items are the main optional accessories for the product, and please consult your local dealer for more other accessories.   Remote Speaker Microphone (IP57) SM18N2   Earpiece with On-MIC PTT & Transparent Acoustic Tube EAN16   D-earset with In-Line Microphone EHN12 Earbud with On-MIC PTT ESN10       Carrying    Case (for thick battery) (leather) (swivel) LCY003 3-Wire Surveillance Earpiece with Transparent Acoustic Tube (beige) EAN17 Six-Unit Switching Power   PS7002    Caution: Use the accessories specified by Hytera only. If not, Hytera shall not be liable for any losses or damages arising out of use of unauthorized accessories.      28

Navigation menu