Hytera Communications PT580HF5 TETRA Digital Portable Terminal User Manual
Hytera Communications Corporation Ltd. TETRA Digital Portable Terminal
User Manual
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 1684665 |
| Application ID | e+FeNVnUsTJCEc1+b06rLw== |
| Document Description | User Manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 232.32kB (2904052 bits) |
| Date Submitted | 2012-04-27 00:00:00 |
| Date Available | 2012-04-27 00:00:00 |
| Creation Date | 2010-12-08 17:26:42 |
| Producing Software | Adobe PDF Library 7.0 |
| Document Lastmod | 2012-04-27 14:20:37 |
| Document Title | User Manual |
| Document Creator | Adobe InDesign CS2 (4.0) |
Preface Thank you for purchasing Hytera TETRA digital trunking terminal. It has a large transflective TFT color display, and supports both TMO and DMO modes. The benefits that this terminal delivers will refresh your experience and enable you to be responsive to emergent situations. To derive optimum performance from the terminal, please read this manual and the supplied Safety Information Booklet before use. This manual is applicable to the following model: PT580H PT580H Hytera 英文说明书 00(RoHS).ind1 2010-12-8 17:26:44 Telephone Call Telephone call is usually a full duplex call initiated between PT580H and a PSTN subscriber (such as telephone user or mo bile phone user).� Instructional Icons The radio is not intended for use by general population in an uncontrolled environment. It is only for occupational use and only applied to work-related conditions.The radio must be only used by users, who are fully aware of the hazards of the exposure and who are able to exercise control over their RF exposure to qualify for the higher exposure limits. To send or receive telephone calls, the terminal must operate in TMO mode, and must be authorized to access public network through PSTN gateway. Telephone call is a network service. For more details and availability of the service, please contact your service provider. The following icons are available through this manual: Emergency Call Emergency call has the highest priority, and is very helpful for the user to request help when emergency occurs. Generally, it is set to group call type. Emergency call can break off any nonemergency calls in progress. Caution: indicates situations that could cause damage to your product. Note: indicates tips that can help you make better use of DMO (Direct Mode Operation)� your product. DMO mode allows terminals to communicate directly with each other in simplex mode, without network restriction. But functions that require network access such as telephone call will be disallowed. Term Explanation Key Operation Short press: to press a key and release it quickly. Long press: to press a key and remain holding it down for a predefined period (1.5 seconds by default). Hold down: to press a key and remain holding it down. TMO (Trunking Mode Operation)� TMO mode allows terminals to communicate with each other via the TETRA network, in half duplex or full duplex mode. Functions that require network access are supported.� To operate in TMO mode, the terminal must be granted authorization by your service provider, and must be within the network coverage. Individual Call� Individual call is a simplex or duplex call initiated by a single user to another user, involving the calling party and the called party only. Group Call Group call is a simplex call initiated by a single user to a group of users, involving the calling party and all the group members. PT580H Hytera 英文说明书 00(RoHS).ind2 Air Interface Encryption An encryption method helpful for protecting message transmitted over the air. It encrypts data and signaling transmitted between the base station and terminal, to protect the message from eavesdropping.� 2010-12-8 17:26:44 Full Duplex Half Duplex notice due to continuous technology development. No part of this manual may be copied, modified, translated, or distributed in any manner without the express written permission of Hytera. If you have any suggestions or would like to learn more details, please visit us at: http://www.hytera.cn. Half duplex allows the ability to communicate in only one direction at a time. Two-way communication is possible, but not simultaneously. RF Radiation Information RF Radiation Profile Copyright Information Radio Frequency (RF) is a frequency of electromagnetic radiation in the range at which radio signals are transmitted. RF technology Full duplex allows the ability to communicate in both directions simultaneously. Hytera is the trademark or registered trademark of Hytera Communications Co., Ltd. in PRC and other countries and/or areas. Hytera retains the ownership of its trademarks and product names. All other trademarks and/or product names that may be used in this manual are properties of their respective owners. The Hytera product described in this manual may include Hytera computer programs stored in memory or other media. Laws in the PRC and/or other countries or areas preserve for Hytera exclusive rights for Hytera computer programs. The purchase of this product shall not be deemed to grant, either directly or by implication, any rights to the purchaser with respect to Hytera computer programs. Any Hytera computer programs may not be copied, modified, distributed, decompiled, or reverse-engineered in any manner without the prior written consent of Hytera. Disclaimer Hytera endeavors to achieve the accuracy and completeness of this manual, but no warranty of accuracy or reliability is given. All the specifications and designs are subject to change without prior PT580H Hytera 英文说明书 00(RoHS).ind3 is widely used in communication, medicine, food processing and other fields. It may generate radiation during use. RF Radiation Safety In order to ensure user health, experts from relevant industries including science, engineering, medicine and health work with international organizations to develop standards for safe exposure to RF radiation. These standards consist of: ● United States Federal Communications Commission, Code of Federal Regulations; 47CFR part 2 sub-part J; ● American National Standards Institute (ANSI)/Institute of Electrical and Electronic Engineers (IEEE) C95. 1-1992; ● Institute of Electrical and Electronic Engineers (IEEE) C95. 1 – 1999; ● International Commission on Non-Ionizing Radiation Protection (ICNIRP) 1998; 2010-12-8 17:26:44 FCC Regulations Federal Communication Commission (FCC) requires that all radio communication products should meet the requirements set forth in the above standards before they can be marketed in the U.S, and the manufacturer shall post a RF label on the product to inform users of operational instructions, so as to enhance their occupational health against exposure to RF energy. Operational Instructions and Training Guidelines To e n s u r e o p t i m a l p e r f o r m a n c e a n d c o m p l i a n c e w i t h t h e occupational/controlled environment RF energy exposure limits in the above standards and guidelines, users should transmit no more than 50% of the time and always adhere to the following procedures: 1. 2. Yo u r p r o d u c t r a d i a t e s m e a s u r a b l e R F e n e r g y only while it is transmitting (during talking), not when it is receiving (listening) or in standby mode. Keep the product at least 2.5 centimeters away from your body during transmission. EU Regulatory Conformance As certified by the qualified laboratory, the product is in compliance with the essential requirements and other relevant provisions of the Directive 1999/5/EC. Please note that the above information is applicable to EU countries only. PT580H Hytera 英文说明书 00(RoHS).ind4 2010-12-8 17:26:45 Contents Checking Items in the Package------------------------ 2 Product Overview------------------------------------------ 3 Product Controls-------------------------------------------- 3 Function Keypad-------------------------------------------- 4 Shortcut Keys------------------------------------------------ 4 Troubleshooting-------------------------------------------18 Care and Cleaning---------------------------------------19 Optional Accessories------------------------------------20 Appendix 1 Input Method-------------------------------21 Appendix 2 SSI&TSI Dialing Rules-------------------22 Before Use-------------------------------------------------- 4 Charging the Battery--------------------------------------- 4 Assembling the Accessories----------------------------- 5 Status Indication------------------------------------------- 6 LCD Icon------------------------------------------------------ 6 LED Indicator------------------------------------------------ 7 Basic Operations------------------------------------------- 7 Turning the Terminal On/Off------------------------------ 7 Adjusting the Volume-------------------------------------- 7 Selecting a Talk Group------------------------------------ 7 Locking/Unlocking the Keypad-------------------------- 7 Switching Operation Mode------------------------------- 7 Call------------------------------------------------------------ 8 Individual Call------------------------------------------------ 8 Group Call---------------------------------------------------- 8 Telephone Call (TMO only)------------------------------- 9 Emergency Call--------------------------------------------- 9 Menu Navigation------------------------------------------10 『Func』Menu-------------------------------------------- 10 『Options』Menu----------------------------------------- 15 PT580H Hytera 英文说明书 00(RoHS).ind1 2010-12-8 17:26:45 Checking Items in the Package Please unpack carefully and check that all items listed below are received. If any item is missing or damaged, please contact your dealer. Terminal Unit Battery Charger Antenna Belt Clip Power Adapter Strap User Manuals Note: The antenna may vary with different frequency bands. And the frequency band is marked on the label of antenna; if not, please refer to the label on the terminal for frequency band information. PT580H Hytera 英文说明书 00(RoHS).ind2 2010-12-8 17:26:46 Product Overview Product Controls No. Part Name SK1 (programmable) No. Part Name PTT Key LED Indicator Antenna 11 Part Name SK2 (programmable) Talkgroup Selector knob Speaker 15 Simplex Microphone 16 19 Belt Clip 20 LCD Display 10 13 Duplex Microphone 14 17 Accessory Jack 18 Function Keypad Power On-Off/Volume Control knob Strap Hole 21 Charging Piece 22 Battery Latch No. No. Part Name Emergency Key Receiver 12 Numeric Keypad Accessory Jack Cover Battery PT580H Hytera 英文说明书 00(RoHS).ind3 2010-12-8 17:26:47 Product Overview Before Use Function Keypad Charging the Battery Only use the charger and battery specified by Hytera. The charge LED will indicate the charging progress. Shortcut Keys Most of the keys, including SK1, SK2, four Navigation Keys, numeric keys 1-9, and , can be set as shortcuts to terminal functions or menus. Then you can quickly access a menu or function with a key press. For operation details, see Shortcuts on page 14. Note: Long and short press of SK1 or SK2 can be assigned with different functions. ■ Procedures: 1. 2. 3. 4. 5. Connect the power adapter to AC socket. See arrow ①. Plug the power adapter into the rear jack of charger; See arrow ②. Place the terminal with the battery attached, or the battery alone, into the charger. See arrow ③. The charging process begins when the charger LED glows red. When charging is complete, the charger LED glows green. Note: To achieve optimal battery performance, please charge the batter y for 5 hours before initial use. PT580H Hytera 英文说明书 00(RoHS).ind4 2010-12-8 17:26:48 Before Use ■ LED Indications and Charging Progress LED Indicator LED flashes red slowly. LED glows red. LED glows orange. LED glows green. LED flashes red rapidly. Status Standby (no load) Charging 85% or more charged Fully charged Failure To take out the SIM card, power off the terminal first, and then do as instructed in step 1. Note: SIM card related services shall be available at later stage. ■ Attaching the Antenna Turn the antenna clockwise to fasten it. Caution: Be sure to read the Safety Information Booklet, to get necessar y safety information. Assembling the Accessories ■ Attaching the SIM Card To remove the antenna, rotate it counter-clockwise. 1. ■ Attaching the Battery Loosen the screw fixing the SIM card cover, open the cover, and then place the card into the slot properly, as shown in the figure below. 1. 2. 2. Fit the battery into the battery slot properly, as shown in the figure below. Slightly press the bottom of the battery until a click is heard. Close the cover and tighten the screw, as shown in the figure below. To remove the battery, turn off the terminal first. Then slide the battery latch upwards to unlock the battery. PT580H Hytera 英文说明书 00(RoHS).ind5 2010-12-8 17:26:49 Before Use Status Indication ■ Attaching the Belt Clip LCD Icon 1. 2. Remove the two screws as shown in the figure below. Align the screw holes on the belt clip with those on the terminal’s body, and then tighten the screws, as shown in the figure below. Icon Name Battery Strength Icons Icon Terminal Status Low battery More bars indicate more battery power No signal RSSI More bars indicate better signal strength Unread message Message Icons To remove the belt clip, loosen the screws. Operation Mode Icons ■ Attaching the Audio Accessory/Programming Cable Profile Icons 1. 2. 3. Loosen the screw on accessory jack cover, and open the cover as the arrow shows. Align the plug with the accessory jack. Tighten the screw on the plug. Inbox is full of unread messages The terminal currently operates in TMO mode The terminal currently operates in DMO mode Silent Normal (Ring and vibration are enabled) Vibration only Call Icon An audio accessory is connected A call is in progress Talkgroup Selection Icon Talkgroup selection is in progress. Accessory Icon To remove the accessory, loosen the screw. PT580H Hytera 英文说明书 00(RoHS).ind6 2010-12-8 17:26:50 Status Indication Basic Operations LED Indicator display). Meanwhile, name of the talk group appears on the screen. You can also set a talk group as the default group by going to “Options->Talk Group->Selected List”. See Selected List on page 15 for more details. LED Indication LED glows red. LED glows green. LED flashes red slowly. LED flashes green slowly. LED glows orange. Terminal Status Transmitting a call Receiving a call Low battery DMO mode channel free DMO mode channel busy Locking/Unlocking the Keypad To lock or unlock the keypad, press OK and then . When the keypad is locked, you can also answer and reply to calls. After a call is completed, the keypad will return to be locked. Basic Operations Switching Operation Mode Go to “Options -> TMO/DMO” to select your desired mode. Turning the Terminal On/Off To turn the terminal on, rotate the Power On-Off/Volume Control knob clockwise until a click is heard. To turn the terminal off, rotate the knob counter-clockwise until a click is heard. Adjusting the Volume In the home screen, rotate the Power On-Off/Volume Control knob clockwise to increase the call volume, or counter-clockwise to decrease it. To adjust the alert tone volume, go to “Func -> Profiles ->Normal”. Selecting a Talk Group In the home screen, rotate the Talkgroup Selector knob to switch to select your desired talk group ( appears on the PT580H Hytera 英文说明书 00(RoHS).ind7 2010-12-8 17:26:50 Call Individual Call Transmitting an Individual Call Operations in DMO mode: Input the number you want to call through the keypad, or go to “Func -> PhoneBook” to select the contact you want to call. 2. Then hold down the PTT and speak into the microphone, to transmit a simplex call. Operations in TMO mode: calls. When the other party stops talking, you can hold down the PTT and speak into the microphone to call back. Operations in TMO mode: ● 1. ● Through the menu 1. Go to “Func -> PhoneBook” to select the contact you want to call. 2. Hold down the PTT to transmit a simplex call, or press ● to transmit a duplex call. Through manual input 1. 2. Input the number you want to call through the keypad. Set Ctype to Private No (it will appear on the screen). 3. Hold down the PTT to transmit a simplex call, or press to transmit a duplex call. Note: Entry of private number must comply with the SSI&TSI dialing rules. See Appendix 2 SSI&TSI Dialing Rules on page XXX for more details. Receiving and Responding to an Individual Call ● Simplex Call When a simplex call is received, you can receive without any operation. When the other party stops talking, you can hold down the PTT and speak into the microphone to call back. Duplex Call When a duplex call is received, you can press to receive. And then both parties can speak simultaneously without any key operation. Group Call Group call is a simplex call initiated by a single user to all users in a talk group. Available talk groups are preset by your dealer. DMO mode supports up to 1024 talk groups, and TMO mode supports up to 2048 talk groups. Both modes support group call, and operations are the same. Transmitting a Group Call 1. 2. 3. In the home screen, rotate the Talkgroup Selector knob to switch to your desired talk group ( appears on the display). Press OK to confirm your selection. Hold down the PTT to initiate the call. Operations in DMO mode: When the PTT is released, the terminal is always ready to receive PT580H Hytera 英文说明书 00(RoHS).ind8 2010-12-8 17:26:51 Call Note: In TMO mode, you can transmit a group call to a talk group only after it is attached successfully. If you failed to attach a talk group, the reason may be that the group does not exist in the network, or you are out of the network coverage. Emergency Call Both DMO and TMO modes support emergency call, and operations are the same. Long press the Emergency key to initiate an emergency call. To terminate the call, press Receiving and Responding to a Group Call You can listen to an incoming group call without any key operation. When the other party stops talking, you can hold down the PTT and speak into the microphone to call back. . In DMO mode, emergency calls are transmitted to the current talk group. And in TMO mode, the target receiver is programmable through the programming software. Telephone Call (TMO only) Transmitting a Telephone Call 1. 2. Input the number you want to call through the keypad. Set Ctype to PABX or PSTN. 3. Press to ���������������������� initiate the call. Answering a Telephone Call When there is an incoming telephone call, you can press to answer. And then both parties can speak simultaneously without any key operation. To reject or to hang up a telephone call, press Note: The terminal must be set with appropriate Gateway No. Please contact your network operator for more details. PT580H Hytera 英文说明书 00(RoHS).ind9 2010-12-8 17:26:51 Menu Navigation 『Func』Menu In the home screen, Press Func key to access the menu list. The operations in TMO mode and DMO mode are the same. Here we are going to introduce all menu items based on TMO mode. ● ● ● ● ● ● ● View a contact Modify a contact Delete a contact Delete all contacts View phonebook memory Search a contact (by name) Call a contact Message PhoneBook ■ Create Message 1. 2. This menu is used to store your contact information. It can contain up to 512 entries. Each entry consists of contact name and contact number. To access this menu, go to “Func -> PhoneBook” in the home screen, and then you can perform these operations: ● Create a new contact Status Message Status Message is predefined by your dealer. You can choose to read and send them, but no editing is available. User Message This option allows you to create a new text message with 140 bytes at most. When creation is done, you can save the message to Drafts or send it to an individual user or to a talk group. ■ Inbox All received messages are saved here. It can contain up to 50 10 PT580H Hytera 英文说明书 00(RoHS).ind10 10 2010-12-8 17:26:51 Menu Navigation entries. When a new message arrives, the icon and the num- ber of new messages will appear on the display. Press View to read the new message now or press Back to view it later. When the inbox is overflowed with unread messages, the icon will appear. Please sort your inbox in time to receive more messages. For any message, you can perform these operations: Reply: to reply to the message sender; Delete: to delete the current message; Delete All: to delete all received messages; Individual: to forward the message to an individual user; Group: to forward the message to a talk group; Edit: to edit the message; Extract No.: to extract numbers involved in the message; Call: to call the message sender. ■ Outbox This terminal can save up to 20 entries in the option Dialed, Received and Missed respectively. When there is a missed call, appropriate indications will be given on the display. After selecting an entry, these options are available: Call, View, Save, Delete and Delete All. Profiles ■ Normal All sent messages are saved here. It can contain up to 20 entries. The available options are: Delete, Delete All, Individual, Group, Extract No. and Call. In this mode, the terminal will alert you to an incoming call or a new message by giving ring and vibration indication. To match your actual needs and preferences, you can customize the following parameters: ■ Drafts Alert Volume You can save up to 10 drafted messages here. For any message, you can choose to delete, edit or send it. You can decrease or increase the volume level using Left or Right key. Call Log 11 PT580H Hytera 英文说明书 00(RoHS).ind11 11 2010-12-8 17:26:51 Menu Navigation Alert Type You can use Left or Right key to select your desired alert type for an incoming call, a new message or keypad press. For an incoming call or a new message, the available options include: Off, Ring, Vibra and Rg & Vb; for keypad press, the available options include On and Off. Settings ■ Date and Time This option allows you to set the current date, time and time format. The method is as follows: To set date and time Ring Tone You can use Left or Right key to select your desired alert tone for an incoming call or a new message. Press Left or Right key to select the item to be set, and then input the right value through keypad. When the current time is displayed in 12 Hour format, press Up or Down key to toggle it between AM and PM. ■ Silent In this mode, no ring or vibration indication will be given when a new call or new message arrives. To set time format ■ Vibration In this mode, only vibration indication will be given when a new call or new message arrives. 12 PT580H Hytera 英文说明书 00(RoHS).ind12 12 2010-12-8 17:26:51 Menu Navigation You can toggle the time format between 24H and 12H using Left or Right key. When all settings are done, press OK to make them take effect. ■ Keypad Lock This option allows you to enable or disable the Auto Keypad Lock feature. If it is enabled, the keypad will be locked automatically after the programmed time (10 seconds by default) elapses. Keypad Light This option allows you to enable or disable keypad light. The lighting duration is programmable with the programming software. ■ Security ■ Display Saver This option allows you to enable or disable the screensaver. If enabled, it will be activated automatically after the programmed time (15 seconds by default) elapses. ■ Display Display Invert This option allows you to invert the displayed information by 180° so that you can access it easily. Note: when the display is inverted, the function of OK key and Back key exchanges. Brightness You can use Left or Right key to adjust the brightness level. PIN Code On/ Off To set PIN code On or Off, you will be required to input the PIN code. The terminal will be locked when wrong PIN code is entered up to the predefined times. To unlock it, you need to enter the right PUK code. Then the terminal will bring you to an interface, where you can reset your PIN code or press Back key to restore it to default value. However, when a wrong PUK code is entered up to the predefined times, the terminal will be disabled temporarily, showing “Radio Disabled”, and then get powered off automatically. Note: The number of times that you are allowed to input wrong PIN or PUK code is programmable through the programming software. When the terminal is disabled, contact your dealer to activate it. The default PIN code is 1234, and the default PUK code is 12345678. 13 PT580H Hytera 英文说明书 00(RoHS).ind13 13 2010-12-8 17:26:52 Menu Navigation PIN Code Change This option allows you to change the PIN code. Before changing it, you need to enter the old PIN code correctly. Then you will be asked to input your new PIN code twice. Please make sure the codes you entered are identical; otherwise, you have to reset it again. ■ Man Down When this feature is enabled, the terminal will send an emergency call to the predefined ID automatically once it falls over or tilts by 45°. With this feature, you can enjoy enhanced personal protection. ■ Reset All function to a specific key as shortcut. In this way, you can press the key to access a function easily. To create a shortcut 1. 2. 3. Select Shortcuts to access the list of shortcut keys; Select your desired key, and press Modify to access the list of assignable functions; Select your desired function, and press OK to confirm. To cancel a shortcut This option allows you to restore all settings to default value. To perform this operation, you need to input the right PIN code. 1. 2. Others 3. Select Shortcuts to access the list of shortcut keys; Select the shortcut key to be cancelled, and press Modify to access the list of assignable functions; Select Empty, and press OK to confirm. Note: The def inition of P1, P2, P3 and P4 is shown below: ■ My Information Under this option you can view some basic information about the radio, including MCC, MNC and ISSI. Keys P1 P2 P3 P4 Definition Short press of SK1 Short press of SK2 Long press of SK1 Long press of SK2 ■ Shortcuts To enhance operation convenience, you can assign your desired 14 PT580H Hytera 英文说明书 00(RoHS).ind14 14 2010-12-8 17:26:52 Menu Navigation ■ Calendar Selected List This option allows you to view calendar information. Under this option, you can set a talk group as the default group. Alternatively, you can do so by rotating the Talkgroup Selector knob in the home screen. The default group is indicated by the icon In the home screen, you can make a group call to the default group by pressing PTT key directly. To add groups to the Selected List, enter a static folder, and select “As SlctList” from Options. 『Options』Menu In the home screen, press Options to access this menu. Here we are going to introduce all menu items based on TMO mode. Scan List 『Options』Menu for TMO 『Options』Menu for DMO You can receive calls only from groups that are included in the scan list and have been attached successfully (indicated by the icon ). But you can always receive from the default group and the emergency group, regardless of the foregoing condition. Talk Group Under this option, you will see Selected List, Scan List, and one or more static folders created through programming software, as shown in the following picture: After entering the scan list, you can perform the following operations: Scan On: to enable Scan feature and to attach all talk groups in the scan list; Scan Off: to disable Scan feature and to detach all talk groups except background group, default group and emergency group. Scan: to attach all talk groups in the scan list. To add groups to the Scan List, enter a static folder, and select “As ScanList” from Options. 15 PT580H Hytera 英文说明书 00(RoHS).ind15 15 2010-12-8 17:26:52 Menu Navigation Note: Scan List is available for TMO mode only. Language This option allows you to select your favorable language. Currently, this terminal only supports English and Simplified Chinese. ■ GPS ���� Static Folder After accessing any of the folders, you can perform the following operations: Add: to include a talk group into the current folder; Delete: to remove a talk group from the current folder; Delete All: to remove all talk groups from the current folder. As SltList: to add all talk groups in the current folder to Selected List; As ScanList: to add all talk groups in the current folder to Scan List. Display of GPS Data GPS data includes date, time, longitude, latitude, altitude, and number of available satellites. Date and time are correlative to the selected time zone. Adjust Time This option allows you to calibrate the time currently displayed on your terminal with GPS time, and is correlative to the Time Zone option. DMO You can use this option to make your terminal work in DMO mode. In DMO mode, this option shall be TMO. Likewise, you can use it to make your terminal work in TMO mode. Data Transmit You may choose to transmit GPS data to an individual user, a 16 PT580H Hytera 英文说明书 00(RoHS).ind16 16 2010-12-8 17:26:53 Menu Navigation group of users, or the control center. This option is correlative to the Send Mode option. Operations to send GPS data are similar to that of short message. Received GPS data is saved in “Message->Inbox”. ● Individual ● Group Auto Send To transmit GPS data to other terminals automatically at a regular interval. To transmit GPS data to an individual user. To transmit GPS data to all users included in a certain group. Note: To implement the Data Transmit function, the terminal must operate in TMO mode. And GPS data is deemed valid only when the GPS receiver has received data from at least 3 satellites. Otherwise, “GPS data invalid” will appear on the screen when you attempt to transmit GPS data. GPS Setup You can set the time zone and select a method to transmit GPS data. ● Time Zone ● Send Mode You can select a time zone according to terminal location or your preference. There are 25 available time zones, used for time calibration. You can choose whether to send GPS data to a specified target periodically. The transmission interval is programmable by your dealer. There are two transmission modes available: Manual Send To transmit GPS data to other terminals manually. 17 PT580H Hytera 英文说明书 00(RoHS).ind17 17 2010-12-8 17:26:53 Troubleshooting Symptom The terminal can not be powered on. Solution Please check whether battery power is too low or whether the battery fails to function due to damage or improper installation. 3. Please check the signal strength and see whether your terminal is within the network coverage. Contact the network administrator, and confirm whether the terminal has acquired appropriate authorization. Check whether your terminal is in TMO mode. The terminal is unable to make a call. 1. 2. Please check the signal strength and see whether your terminal is within the network coverage. Check whether the called party is within the network coverage. The terminal is unable to call or receive from a specific group. Check whether your terminal is a member of the target group. Check whether your terminal is authorized to access the target group. The terminal is unable to make a call in DMO mode. 1. 2. The called party is out of coverage. The called party is not in DMO mode. Network registration fails or network can not be found. Half duplex transmission is terminated. Normal call is interrupted. For the same status message, the content displayed at the sending party and at the receiving party varies. Abnormal disconnection occurs during a call. 1. 2. Overlong time of transmission makes the timer expire. Check whether a terminal is making a pre-emptive priority call or emergency call. Please check whether both parties have assigned the same content for this status message ID. 1. 2. 3. Check the signal strength in TMO mode. Check whether you are in a place where the signals can be shielded (such as basement and tunnel) and whether the other party is out of coverage. Check the battery strength. Note: If the above solutions can not fix your problems, or you may have some other queries, please contact us or your local dealer for more technical support. 18 PT580H Hytera 英文说明书 00(RoHS).ind18 18 2010-12-8 17:26:53 Care and Cleaning To guarantee optimal performance as well as a long service life of the product, please follow the tips below. Product Care ● ● Do not pierce or scrape the product. ● Do not hold the product by its antenna or earpiece cable directly. ● Attach the accessory jack cover when the product is not in use. Keep the product far away from substances that can corrode the circuit. Product Cleaning ● Clean up the dust and fine particles on the product surface and charging piece with a clean and dry lint-free cloth or a brush regularly. ● Use neutral cleanser and a non-woven fabric to clean the keys, control knobs and front case after long-time use. Do not use chemical preparations such as stain removers, alcohol, sprays or oil preparations, so as to avoid surface case damage. Make sure the product is completely dry before use. Caution: Power off and remove the battery before cleaning. 19 PT580H Hytera 英文说明书 00(RoHS).ind19 19 2010-12-8 17:26:53 Optional Accessories The following items are the main optional accessories for the product, and please consult your local dealer for more information. 3-Wire Surveillance Earpiece with Transparent Acoustic Tube (black/ beige) EAN17/ EAN18 MCU Multi-unit Rapidrate Charger (for LiIon/Ni-MH batteries) MCA06 Battery Analyzer MCA05 Programming Cable (USB Port) PC36 Caution: Use the accessories specified by Hytera only. If not, Hytera shall not be liable for any losses or damages arising out of use of unauthorized accessories. 20 PT580H Hytera 英文说明书 00(RoHS).ind20 20 2010-12-8 17:26:58 Appendix 1 Input Method You can enter aliases, numbers or messages using the keypad. This terminal supports these input methods:�������������������� Simplified Chinese Pinyin (拼), English (ABC/abc) and Number (123). method. All English letters are distributed among 8 alphanumeric keys. Press appropriate key repeatedly to get and enter your desired letter Switch of Input Method Number In input mode, press When the input method is switched to Number, press appropriate key to enter your desired number. to switch to your desired input method. The appropriate symbol will appear on top right corner of the screen; Simplified Chinese Pinyin Punctuation In Simplified Chinese Pinyin/English mode, press Enter the pinyin through alphanumeric keys; then a list of possible combinations and corresponding characters will appear; For example, to input the Chinese character “间”: to enter your desired punctuations; while in Number mode, it is not allowed to enter any punctuation. Space In English/Number mode, long press to enter a space, and short press it to enter “*”; To enter a space in Simplified Chinese Pinyin mode, press and 1. Press 2. Press OK to move the cursor from Pinyin area to Chinese character area; Use the navigation keys to scroll to the target character “间”; Press the OK key to enter the selected character. 3. 4. in order; and then select the space (the first one). Note: Short press Back key to delete the entered character one by one, or long press it to delete all entered characters at a time. Switch between Uppercase and Lowercase In input mode, press to switch to your desired input 21 PT580H Hytera 英文说明书 00(RoHS).ind21 21 2010-12-8 17:26:58 Appendix 2 SSI&TSI Dialing Rules This terminal supports these dialing methods:��������������� SSI&TSI, PABX and PSTN. Each method shall follow a specific dialing rule. Currently, this terminal is only capable of checking SSI&TSI dialing rules. When you want to call a PABX or PSTN subscriber, please input the target number directly through the keypad. SSI&TSI dialing rules are as follows: ● For target number less than 8 digits, input it directly; For example, when MCC = default value, MNC = default value and ISSI = 504, you just need to input 504 or 00000504 to make the call; ● For target number with 9 -13 digits, input MNC+ISSI; In this c ase, ISSI must be 8 digits long, and add 0 before the first digit to supplement the balance when it is less than the said length. For MNC, input it as it is. F o r ex a m p l e , w h e n M C C = d e f a u l t v a l u e , M N C = 2 0 and ISSI=504, you need to input 20 0 0 0 0 0504 or 0002000000504 to make the call; ● For target number over 13 digits, input MCC+MNC+ISSI; In this c ase, ISSI must be 8 digits long, M NC must be 4 or 5 digits long and MCC must be 3 digits long. Add 0 before the first digit to supplement the balance when any of them is less than the said length; For example, when MCC = 460, MNC = 20 and ISSI = 504, you need to input 460 0 0 020 0 0 0 0 0504 or 460002000000504 to make the call. Note: MCC stands for Mobile Countr y Code, MNC stands for Mobile Network Code and ISSI stands for Individual Short Subscriber Identity. 22 PT580H Hytera 英文说明书 00(RoHS).ind22 22 2010-12-8 17:26:58
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.6 Linearized : Yes Encryption : Standard V2.3 (128-bit) User Access : Print, Extract, Print high-res Tagged PDF : Yes XMP Toolkit : 3.1-702 Instance ID : uuid:a84671f5-7ac2-427c-97b1-6284ee3bb167 Document ID : adobe:docid:indd:5d9677ff-06f6-11df-a7c6-84d4b0f26665 Rendition Class : proof:pdf Derived From Instance ID : 5d9677fe-06f6-11df-a7c6-84d4b0f26665 Derived From Document ID : adobe:docid:indd:083a0935-fc06-11de-ab85-a1a2b5829977 Create Date : 2010:12:08 17:26:42+08:00 Modify Date : 2012:04:27 14:20:37+08:00 Metadata Date : 2012:04:27 14:20:37+08:00 Creator Tool : Adobe InDesign CS2 (4.0) Thumbnail Format : JPEG Thumbnail Width : 256 Thumbnail Height : 256 Thumbnail Image : (Binary data 3516 bytes, use -b option to extract) Format : application/pdf Producer : Adobe PDF Library 7.0 Trapped : False Page Count : 26 Creator : Adobe InDesign CS2 (4.0)EXIF Metadata provided by EXIF.tools