Hyun Won DAH1200 MP 3 PLAYER WITH FM RADIO User Manual User s Manual H

Hyun Won Inc. MP 3 PLAYER WITH FM RADIO User s Manual H

UserManual.wiki >

Hyun Won >

DAH1200 User Manual HTML Version

USERS MANUAL

EUT Type: MP3 Player

FCC ID : PCMDAH1200

Test Report No.: GETEC-E3-04-025

FCC Class B Certification

APPENDIX H

: USER’S MANUAL

Technical Support

Tel : (82) 54-338-6000(+4 ext.)

E-mail : call@hyunwoninc.com

http://www.hyunwon.com

USA & Canada

Toll Free No. : 1-888-283-2580

E-mail : support@hwiamerica.com

http://www.hwiamerica.com

User Manual

Model No. : DAH-1200

Multi Format Digital Audio Player

MP3 & WMA Playback

FM Radio

Voice Recorder

Music Encoder

IMPORTANT NOTICE

About copyrights

A copyright gives certain exclusive ownership rights to the person

who creates an original work. These rights are protected by the U.S.

and international laws. It is illegal to reproduce copyrighted material

without the permission of the copyright owner.

Whenever you copy, or make a direct-encoded recording, of music

or a video, or other original work that you did not create, consider that

it may be copyrighted. Ownership of a CD or licensed digital media

files that you downloaded from the Internet, or made a direct-

encoded recording of, does not necessarily constitute the right to

redistribute or share the content.

If you intend to redistribute or share content, be sure you have the

necessary permissions to do so.

Safety Instructions

Warning

To reduce danger of fire or electric shock, do not expose the product to rain

or moisture.

Do not release or distribute the music files formatted in WMA or MP3 from

the product to the public. (As this would violate Copyright laws.)

The software contained on the installation CD-ROM is for personal use only

and it not to be distributed.

To maintain best quality from the player

Do not use the product in hazardous conditions, such as extremely

high/ low temperatures, dusty area, or excessively wet areas.

Do not leave the product in the bathroom, near/ on a heater, or in a car

parked in the direct sunlight.

Do not leave batteries in pockets with any metallic substance such as coins

or keys.(Doing so may cause fire from the batteries contacts)

Throwing or dropping the product can cause shock damage.

Avoid sudden shock

Any data lost due to careless use is not our responsibility.

(Any valuable data should be stored on your PC)

Caution when using headset

Auditory sense may be damaged when listening to the music at a high

volume for extended time periods.

Using a headset while driving a car or riding bicycle/motorcycle is not

recommended.

Use caution when walking or jogging with device.

Ear-in type headset should have a long wire to be located at the back of the

neck.

Do not ever disassemble to repair or rebuild the product as it may cause

permanent damage.

Welcome to the world of MP3Contents

Welcome to the world of MP3

What is a digital audio player?

Product Specification

PC System Specification and Accessories

Hardware Overview

Power Supply

Installation of M-ANY Loader Plus

How to connect MP3 with PC

When USB Port is not recognized

How to use mobiBLU Loader Plus

How to format Memory

How to download files

How to upload files

Explanation of LCD DISPLAY

Power On and Off & Auto power off

How to use Folder Navigation Mode

Set up Repeat modes

Set up Section Repeat modes

Set up EQ Modes and Fast Searching

Set up User’s EQ ( User1, User2 )

How to Record Voice

How to Record Music

Listening to Voice recorded files or Music files

How to Erase files

How to use FM RADIO

Searching FM frequency

Saving the frequency ( Preset Mode )

Erasing saved frequency

How to Record FM Radio

Return to Music Play Mode

Set up HOLD ( Lock key )

Remote Control Manual

How to check the O/S and manager version

How to upgrade mobiBLU Loader Plus

How to upgrade Firmware ( O/S )

Troubleshooting Problems

WARRANTY SERVICE

FCC RF INTERFERENCE STATEMENT

Thank you for purchasing portable digital audio player MP3 .

MP3 is MP3 Player with simple design and FM Radio function.

MP3 has built-in memory of 64/96/128/256/512MB. It is able to support for

format of new music and is made to cope with the problem of intellectual

property. You can enjoy various content such as digital music and talk by

playing a cutting-edge digital audio player.

Caution

As Hyun Won Inc. owns copyright of this product, you must get

approval from the company when using its description, picture,

software and other related documents. In the case of breach, you

can be penalized by the court of law. The content of the

description could be changed without prior notice.

Product Specification

What is a digital audio player?

What are MP3 and WMA File?

MP3 and WMA files are compressed(1/12) data taken from CDs

through MPEG1-Layer3 and converts the data into a file that can be

used on computers. They provided music that has equivalent quality

of existing CD.

What is portable digital audio player ?

It is a portable player that enables digital audio file to be saved and played

that in the past were only be available on existing PC computers.

Caution

WMA files must be recorder at a bit rate of 32Kbps or higher to play on the device

Internet PC

Communication

Digital

Audio File Digital

Audio File

Digital Audio player

FM TUNER

Division ITEM Specification

Audio

File

support

Recording time

Play time

Battery

Size 36 81 16mm

(W HD)

(except battery) 35g

Weight

LCD Graphic LCD

Operational temperature range

USB

File type MP3,WMA(No DRM), ADPCM

MP3:over 8Kbps, WMA:over 32Kbps

Bit Rate

Download speed 4Mbps(USB Version 1.1)

Voice record 1,040minutes (256MB)

Music record 240minutes (256MB)

-5 ~70

Alkaline 1.5V AAA

Abt. 9hrs. with 1EA AAA

Frequency range 87.5MHz ~ 108.0MHz

20Hz ~ 20KHz

(L)7 + (R)7 (16 )

Maximum volume

(L)7 + (R)7 (16 )

maximum volume

Headphone/earphone cord antenna

Headphone output

S/N Ratio

Antenna

Frequency range

S/N Ratio

CD Data MP3 Data

1/12

Compression

WMA Data

1/2

Compression

Hardware Overview

PC System Specification and Accessories

Please visit our web site(http://www.mobiBLU.com) to see the latest

accessories as well as software and firmware.

A. Program CD

MP3 FM Accessories

B. Earphones C. Manual

D. Line-in Cable

I. AAA Battery

H. Carrying case or

Case with Armband

(Optional Item)

J. Remote Control

(Optional Item)

G. USB Cable

G. Neck Strap

PC Specification for the MP3 device.

Microsoft OS (Windows 98, ME, 2000, XP)

CD-ROM drive

CPU with Pentium 200MHz or higher

RAM 32MB ( 64MB for Windows ME or 2000 )

Hard disk with 128MB or more of free space

(When saving music files, additional capacity of hard disk is needed.)

USB port

Power Supply

Use 1 AAA size battery

. Open the battery cover by pushing in

the direction of the arrow.

. Load the battery as indicated in the

illustration, making sure that it is positioned

correctly.(+ to +, and - to -)

. Replace the battery cover.

1.5V AAA type 1EA battery.

Please check carefully the polar points of the

battery to prevent the Product damage.

Icons indicating the remaining capacity of the battery

When initially operating, the icons of the remaining capacity may not readable.

(Battery usage time)

(enough) (middle) (low)

When using a general battery, the player could stop working, even though the

battery capacity icon shows medium level, due to the peculiarity of the battery.

(In this case, please change the battery into a new one.)

please change into a new battery as the following cases.

When the icon blinks the signa; of EMPTY .

When the player stops working immediately after pushing any button.

When the panel of the indicator doesn t change with any button in the body

on.

1. Use 1 AAA size battery

open the battery cover by pushing in the direction of the arrow.

Playing time may vary depending on usage conditions, manufacture

company, or kind of batteries.

Batteries Playing Time

Alkaline Battery 9 hours

Playing time of a battery

Installation of mobiBLU Loader Plus

In order for the player and your PC to communicate and transfer digital files,

you must first install the mobiBLU Loader Plus by completing the following

steps:

Notice

1. Insert mobiBLU Loader Plus CD into CD-ROM drive. When CD is put in, Setup

program is automatically executed and the screen below pops up.

2. When Setup is started, follow the instruction of installation program.

If the Setup program is not automatically executed, find and execute

Setup.exe file in TCC folder of CD-ROM drive.

Select language for installation and click Confirm. Then two windows below

pop up and Setup starts.

Click!

1. Windows Xp users please note : You may receive a warning regarding

Windows Driver certification, Click Yes or Next to continue the installation.

2. If a rebooting message displays during setup, Reboot your PC to

complete installation.

Important Notice

3. If you click on a finger, the screen below pops up.

(If you click on the arrow below in order, the installation is completed.)

4.After completing the installation, mobiBLU Loader Plus icon

appears on Windows screen.

Click!

mobiBLU

Loader Plus

When USB Port is not recognized

How to connect MP3 with PC

How to connect USB Cable.

See the graphic below for visual instruction on how to connect the MP3 to

PC. If mobiBLU Loader Plus does not recognize the players memory when

connecting disconnect the USB Cable from MP3 and then turn on the power

and reconnect.

Player

DATA

(USB Port)

USB Cable

USB Port

When connecting the USB to the player, the power of the device is turned on.

Reference

1. When connecting the cable with MP3, please make sure the correct

orientation of the connector end, and do not force the connector.

2. Do not disconnect the cable by force when MP3 is communicating with

your Computer, like downloading, uploading, OS updating and formatting.

This may cause serious damage to your computer or MP3.

Important Notice

Please refer to “Manager Program Help” in the installed mobiBLU

Loader Plus

Please connect the USB cable to a USB port on the back side of the PC case.

If you connect the USB cable to a USB HUB or USB port on the front case, it

may cause an instable connection with the device.

NOTE

1. Open the Help site.

2. Click the article of “How to reinstall the erroneously

recognized USB Drive”

3. If you still have a problem with USB connection, please see

“Trouble Shooting” in this manual.

Click!

How to use mobiBLU Loader Plus

A. File Selector

This enables you to view files by type.

B. File List Window

This window displays the files contained in the selected folder enabling you to

selectively download files to flash memory.

C. Folder Manage Icons

1. Display the directory of the current

2. Move to the Root Directory directly

3. Make a new folder

* To delete a folder, press “Delete” icon on the manager or “Del” key on the keyboard

when the folder is selected.

D. Memory Contents Window

This window enables you to check the file title, size, type and download status of the

flash memory of the player.

Flash Memory

Add : Adds the selected files to the selected memory. Selected

files are placed in “Ready to Transfer” status in the memory

contents window.

Upload : Uploads of the selected MPE or ADPCM files on the

player memory to the selected PC folder

Delete : Deletes selected files on the selected memory

Format: Formats flash memory

Refresh : Refreshes view of selected memory

Cancel : Cancels file transfer between player and PC.

E. Folder Window

This window enables you to select audio files more easily by allowing you to

browse specific folders of your PC. The selected folder contents are displayed

in the File List Window to the right.

F. Memory Status

This indicates the amount of memory available, the amount of total memory and

memory connection status. This window may indicate "No Memory Found" in

cases Slim Sound FM is not connected properly.

G. Transfer Files Button

This button begins transferring selected audio files to the player.

H. Functional Icons

How to format Memory

Using the Format icon 1Open the mobiBLU Loader Plus and

connect digital audio player to the PC .

2Select the format type you prefer a

dialog box will appear to verify format

selected.

3If you click on the YES button format

will begin, When formatting completes,

a dialog box appear to let you know the

format is complete.

4Click the OK button to complete the

process.

WARNING

Do not terminate the Format once it begins. If you remove USB Cable

while it is being formatted, the player may be permanently damaged.

Click!

Low Level Format : A "Low Level Format" is a longer procedure as it

checks the disk sector by sector for any problems and

repairs them if it finds them. This is somewhat similar

to the 'Scandisk' program and requires that no other

applications are opened during the formatting procedure.

Normal Format :The "Normal Format" is, in essence, a quick 'clearing' of

all the data on the memory card. It accomplishes the same

thing as selecting all songs and deleting them.

Normal format / Low level format

When using the menu

Click!

How to download files

1Run mobiBLU Loader Plus and Connect MP3 to your computer.

2Highlight file/s to be downloaded in the File List Window using the

Folder Window to browse for folders containing your audio files.

You may select files one of 3 ways:

The selected files will appear in the Memory Contents Window

with "Ready to transfer" listed under the status column.

a.You may drag & drop individual files from the File List window

to the Memory Contents Window.

b.You may select multiple audio files by holding down the CTRL

key while clicking the left-mouse button on each file you wish to

download to the player then drag and drop the selection of files

as above.

c.You may press the "F5" key or "Add" icon after highlighting

each file.

3Click the "Transfer" button to start downloading selected files to

the memory.

Click!

4To cancel a download in progress click the "Cancel" icon.

5Close the mobiBLU Loader Plus before disconnecting the USB

Explanation of LCD DISPLAY

How to upload files

How to upload file

MP3/WMA file cannot be uploaded under related laws. (Other files such as MPE,

ADPCM, ZIP, DOC, etc. can be uploaded.)

If you want to move file from MP3 to the PC, follow the instruction

below.

Select files in the Memory Contents Window that you want to upload,

and click the ‘Save it to PC/Upload’ button, then the files are uploaded

to the selected folder on your PC.

Note

File cannot be played during communication with the PC.

a. You may drag & drop individual files from the Memory Contents

Window to the File List window.

b. You may select multiple audio files by holding down the CTRL key

while clicking the left-mouse button on each file you wish to upload

to the player then drag and drop the selection of files as above.

Note

MUSIC PLAY MODE

FM RADIO MODE

a. Song title

b. Current file extension

c. Current state(PLAY , PAUSE )

d. Equalizer

e. Play time

f. Volume (0~30)

g. TRACK Number

h. HOLD

i. ( )Repeat the current song,

( )Repeat all songs

( )

Play all songs once in Random mode

j. Voice and music recording

k. Amount of battery

abcde f g

hi j k

abc de f g

hij

a. Frequency

b. FM icon, MP3 icon during recording

c. The receiving frequency

d. Radio, Preset (Autoset, Erase All) on

Present MODE

e. Recording time

f. Volume (0~30)

g. Preset Num:1~10,(Others - ‘000’)

h. HOLD

i. FM Radio recording

j. Amount of battery

k. Stereo On/Off

How to use Folder Navigation Mode

Power On and Off & Auto power off

1. Power On : Press Play ( ) button for 2 seconds or until the

LCD illuminates.

Play Music : Press Play( ) button shortly to play music.

a. If there are music files in the Root

Folder, it’s ready to play the first music

file(Stop Mode).

Auto Power save mode

: If the player senses it is not used for 5 minutes

at Pause Mode, it will automatically go to Stop Mode.

Auto Power off mode

: If the player senses it is not used for 5 minutes at

Stop Mode, it will be automatically turned off.

* Resume Play function : When power is turned off normally as above, and the

user turn it on again, last position of the music will be

played.

b. If there is no music file in the Root

Folder, the initial Mode will be Folder

Navigation Mode.

You can navigate sub directories and

files with Vol+/ - and FF/REW buttons.

2. Pause : Press Play button shortly while playing. It will be Pause mode.

3. Stop : Press Stop button shortly while playing. It will be Stop mode.

4. Power Off : Press Stop ( ) button for 3 seconds or until the LCD

shuts off.

Get in Folder/File Navigation Mode

It’s not available at Pause mode, FM Radio mode, and Recording

mode. It’s only available at STOP mode of Music Play.

Files will be listed fist at the current folder.

If there are sub folders, they will be

listed after the last file.

Press Play button to play the current

music.

1. Press Mode button shortly at STOP mode of MP3 Player. If there is a

music file at the Root Folder, the file will be listed first.

2. Navigate files and folders with Vol.+ / - button.

How to use Folder Navigation Mode

If there are sub folders, they will be

listed after the last file.

Press Play button to play the current

music.

If the current folder is ROOT, there is

no response with REC button.

4. Move to upper folder with REW button.

Move out from Folder Navigation Mode

There are four ways to get out from this mode.

It moves to the Stop Mode of Music Play

and ready to play the finally selected

file in the folder.

Press Play button to play the current

music.

1. Press Mode button shortly during Navigation.

It moves to Root folder and

exit the file/Folder mode.

2. Press STOP button shortly during Navigation.

It moves to Voice Record Mode and

ready to start Voice Record.

If you press REC button shortly,

it starts Voice Recording.

3. Press REC button for 2 seconds during Navigation.

It moves to Music Play mode directly.

4. Press PLAY button shortly during Navigation.

If there are sub folders, they will be listed after the last file.

Press Play button to play the current music.

3. Get into the selected sub folder with FF button.

Set up Section Repeat modes

Set up Repeat modes

RANDOM / REPEAT MODE

Press the MODE button shortly while the file is playing.

NORMAL REPEAT REPEAT-ALL FOLDER-ALL RANDOM

RANDOM-ALL

Repeat All: Plays all songs in selected folder

continuously.

Repeat: Plays one selected song continuously.

Normal: Plays all songs in the folder in the order

they are stored.

Random: Plays all songs in selected folder once

in a random order

Folder All: Plays all songs in all folders

Random All: Plays all songs in selected folder

continuously in a random order.

Note

1. If currently playing file format is not *.ADP file(Voice Recorded file), this mode

will play all music files(*.MP3/*.MPE/ *.WMA)

2. If you press FF(Fast Forward) button in this Folder All mode, songs out of

the current folder will be played in order from ROOT folder after the songs

in the current folder.

REPEAT MODE(Repeat an interval of the current song)

1. Press the MODE button for 2 seconds while the file is playing.

REPEAT MODE' is displayed.

2. Press Mode button again shortly at desired beginning point.

The message “Repeat A-” appears on the LCD display.

3. Press REC button again to mark the desired ending point.

The message “Repeat A-B” appears on the LCD display.

4. File is repeated in the range between A and B.If position B is not

specified, the player will default the ending position to the end of the

file. If you press the STOP button, REPEAT MODE is canceled.

Set up User’s EQ(User1, User2)

Set up EQ Modes and Fast Searching

Fast Searching

1. If you press and hold the FF/REW button while in

play mode, FF/REW Searching is done in 4 speed

increments, the searching speed increases are 4x,

8x, 16x and 32x regular speed.(every five seconds

respectively.)

2. During REW Searching, when beginning of the

song is reached, Music plays from the start.

3. During FF Searching, when the end of a song is

reached , the searching will begin from the initial

part of next song.(Play for about 2 seconds from the

beginning of the song.)

EQ MODES

There’re 5-preset EQ modes and two user’s EQ modes.(User 1 and User2)

The mode will be changed by pressing play( )button for 2 seconds

in play mode, in order, as follows;

Live Dance Jazz Latin Rock User 1 User 2

Each time you press PLAY button for 2 seconds the EQ settings will change in

the order listed above. The option you stop at is the one that will be set on

the player.

Sound quality may drop according to the song. The equalizer can be used to

optimize the song quality .

USER1 MODE, USER2 MODE

1. Begin in Play MODE

USER EQ MODE is available only while music is playing.

- Press "MODE" button for 2 seconds in.

(Repeat MODE appear on the display)

- Press "MODE" button again for 2 seconds.

("USER1" MODE appears on the display)

- Press "MODE" button again for 2 seconds.

(USER2 MODE appears on the display)

2. USER EQ SETTING MODE

- Press "MODE" button once quickly while "USER1" or "USER2"

is displayed. (doing so will allow you to personalize your EQ settings)

(5 Bar will be display on LCD)

3. Change EQ setting (USER1 EQ, USER2 EQ)

- Change EQ setting is only available when bars are displayed on

LCD.

- First Bar will blink indicating edit mode.

- Change EQ Bar with FF/REW button.(move between 5 Bars)

- Change Value with Vol +/- button. (value of each bar)

(-15~+15 : 31 levels)

4. Quit User EQ mode

- Press "STOP" button shortly to quit EQ mode.

How to Record Music

How to Record Voice

1. Voice record function is only available while Player is in STOP MODE.

2. Press the REC button for 2 seconds, VOICE RECORD is displayed.

3. Press the REC button shortly, voice recording is initiated.

(REC icon is turned on in the lower part of LCD screen, and

Recording... is displayed.)

4. To terminate recording, press the STOP button.

ADP : Voice Recorded files ( V ***. ADP ) are saved in this folder

automatically. ( If there s no ADP folder at the starting Voice

Recording, ADP folder will be created in root folder. )

5. To play the recorded file, press the PLAY button. The recorded file is

displayed as V001, V002, V003,.....

Note

If flash Memory is full, it will flash two times and then, the Recording

will end automatically. (If battery dies during recording, the recorded

file is automatically saved and power is shut down.)

1. Insert one end of Encoding Cable into the earphone terminal of an

ordinary audio device (ie: CD Player, Cassette deck, Radio) and the

other end into IN PUT AUDIO terminal of the MP3.

2. Begin in STOP mode, Press the REC button for 2 seconds, VOICE

RECORD is displayed, Press the REC button once more for 2 seconds,

Music Record is displayed.

3. Press REC button again shortly, music recording begins. (Recording icon is

turned on in the lower part of LCD screen, and Recording... is displayed.)

You can listen to the file through earphone while recording. (loop back)

Listening to Voice recorded files or Music files

How to Record Music

What is loop back?

Function that enables you to verify/listen to recoding that is currently

being executed through earphones with a little noise, (During loop

back, you may hear some interference but the actual file will not

have the same problem.)

4. To terminate recording, press the STOP button

5. To play the recorded file, press the PLAY button. The recorded file

is displayed as E001, E002, E003,...

NOTE: If flash Memory is full, it will flash two times and the

Recording will end automatically. (If battery dies during recording,

the recorded file is automatically saved and power is shut down.)

MPE : Music Recorded files ( E ***. MPE ) are saved in this folder

automatically.( If there s no MPE folder at the starting Music

Recording, MPE folder will be created in root folder. )

1. There are two types of file formats.

a. Music Files

: *.MP3 / *.MPE

: *.WMA

b. Voice Recorded Files

: *.ADP

2. How to change the type of playing format

Press PLAY button for a while in each STOP mode.

How to use FM RADIO

How to Erase files

1. Erase MODE can only be used while in STOP mode

2. Begin in STOP mode, Press the REC button for 2 seconds, VOICE

RECORD is displayed, Press the REC button for a second time for 2

seconds, Music Record is displayed. Press the REC button for a third

time for 2 seconds, Erase Mode is displayed.

3. Press REC button again shortly, Erase Mode is initiated.

4. Locate the file you want to erase with FF/REW button, Once the file is

located, press the REC button shortly. “Erase? Yes:rec NO:Other”

is displayed.

- To erase, press the REC button shortly, Erasing..” is displayed

and the file is erased.

- To cancel erasing, press any other button except REC shortly,

then, Erase Cancel” is displayed and erasing is terminated.

Erase function?

This function enables you to remove files from the player without

connecting it to the PC/ mobiBLU Loader Plus.

1. RADIO MODE can only be initiated in STOP mode.

2. Begin in STOP mode, Press the MODE button for 2 seconds, FM Radio

is displayed ( FM Radio” is displayed for about 3 seconds, and then

received current frequency is displayed.)

3. FM icon is displayed in the upper left part of LCD. Radio icon is

displayed in the right-upper part of LCD.

4. Preset Number is displayed where Track Number of MP Player

MODE is normally shown. Preset Number is the number of the saved

frequency. A total of 10 frequencies can be saved.

(Preset Number 1 ~ 10)

Note

Each radio station uses different frequencies.

The range of frequency modulation differs from nation to nation.

Note

When you turn on the MP3, you begin in MP Player MODE. Then,

press MODE button for 2 seconds to change the mode.

(MP Player MODE, FM RADIO MODE)

Searching FM frequency

How to use FM RADIO

Listening to the radio FM RADIO MODE (Frequency 87.5MHz~108.0MHz)

1. After entering RADIO MODE, press the PLAY button shortly to listen

to the FM radio.(RADIO MODE )

- Antenna icon is displayed above FM icon.

- According to the rate of received frequency, the level is indicated with a bar.

To stop listening to the radio.

1. While Radio is playing, press the STOP button shortly.

The antenna icon is turned off. The frequency that you were listen to

is automatically saved.

- If STOP button is pressed for 3 seconds,Power is shut down.

- After 5 minutes in Stop mode, it will be turned off automatically.

Searching frequency manually

1. Press the FF/REW button shortly to search frequency.

(Frequency is increased or decreased by 0.05MHz.)

2. Searching is possible in both STOP and PLAY MODE.

Searching frequency automatically

: Searching frequency is possible in

STOP/ PLAY/ Preset/ Auto Set MODE.

1. Press the FF/REW button for 2 seconds,

searching frequency is automatically started.

2. When search reaches a high receiving rate,

it is automatically stopped.

3. You can listen to radio when the searching

is stopped.

4. Auto Search by pressing FF/REW button in Stop

mode will go to FM Radio play mode when the

first Channel is searched.

Saving the frequency(Preset Mode)

1. While the Radio is playing Press the MODE button for 2 seconds,

Preset MODE is started. (Preset icon is displayed where Radio icon

was shown.)

2. If you press MODE button shortly at Preset MODE, the current frequency

is saved in the Preset Number that is displayed on LCD screen.

(The frequency that was displayed in the middle of LCD screen

flashes twice.)

3. Change the Preset Number by pressing FF/REW button briefly while

in Preset MODE. (Preset Number is displayed just below the Volume )

4. You can search frequency while in Preset MODE.

- Search frequency by pressing FF/REW button for a while.

Saving frequency with Preset MODE

1. If you press MODE button for 2 seconds at Preset MODE, Auto Set MODE

is started. (Auto Set icon is displayed where Preset icon used to be.)

2. If you press MODE button at Auto Set MODE briefly, Auto setting" is

displayed for 1 sec in the middle of LCD screen, and 10 frequency

(001~010) is automatically saved.

3. When frequency with a high receiving rate is received, Preset Number is

automatically increased and the frequency is saved. (You can select Preset

Number and frequency by using FF/REW button before searching at Auto

Set MODE)

4. Once all 10 frequency is saved, Preset Number is changed to '001' and

receive the frequency that is saved.

5. If you press STOP button while executing auto search, the searching is

stopped.

- Only STOP button is recognized while auto searching.

Note

At Preset MODE or Auto Set MODE, press STOP button to get out of

MODE. But, while auto searching, only searching function is stopped.

Saving frequency at Auto Set MODE(saving various frequency at once)

How to Record FM Radio

Erasing saved frequency

1. If you press MODE button for 2 seconds at Auto Set MODE, All Erase icon is

displayed where Auto Set icon used to be. Then, All Erase MODE is started.

2. If you press MODE button shortly at All Erase MODE, Preset clear" is

displayed and all the saved frequency is erased. All frequency belong to Preset

number is initialized at 87.5MHz.

Erasing Preset frequency (erasing all 10 at one time)

2. Press REC the button briefly once more in RADIO RECORD MODE, the

recoding will begin. While recording, REC icon is displayed in the lower

part of LCD screen, and Recording..." is shown in the middle of the

screen. Format icon that is identical to recording file ( ) is displayed

where FM icon used to be.

1. While Radio is playing, press the REC button for 2 seconds RADIO RECORD”

is displayed.( REC stand-by )

Set up HOLD (Lock key)

How to Record FM Radio

3. To terminate the recording press the STOP or REC button briefly

the recording is stopped. REC Stop" is displayed for 1 sec and then file

name is displayed for 1 second. (E001, E002, E003... )

- File name: The name of the file can be changed after uploading to the PC

by using the mobiBLU Loader Plus.

4. If you press the STOP button for longer than 3 seconds while recording,

the power is shut down, and the file being recorded is automatically saved.

- While recording, FF/REW, MODE buttons are disabled. You can listen to

radio through earphone. (Loop back)

1. Press the STOP button shortly while Radio is playing

– this will stop the Radio from playing.

2. Press the MODE button for 2 seconds, This will take you to MP Player Mode.

Return to Music Play Mode

1. How to lock the buttons

- Move the slide key When you lock/Hold the player, it disables the function

of the buttons.

- The Key icon appears on the LCD display to indicate the buttons are locked.

2. To end the HOLD function

- Move switch back to unlock the buttons.

- The Key icon will disappear from your display indicating that your buttons

are functioning again.

Remote Control Manual

Earphone Jack

VOL+/ VOL-

STOP

EQ / MODE

PLAY/PAUSE

REW

HOLD

1. This Remote Controller has 7 buttons and one slide “hold” switch.

(PLAY/STOP/Vol+/Vol-/FF/REW/EQ/HOLD)

2. Every button with the exception to the EQ/MODE button works exactly the

same as on the MP3.

3. How to use the EQ/MODE button on the Remote

a. REPEAT MODE

- Please press EQ/MODE button while the song is playing.

(Repeat A is displayed.)

- Then press the EQ/MODE button again while song is playing.

(Repeat B is displayed).

The song will play continuously between A and B.

Press Stop button to cancel the Repeat MODE.

b. User EQ Settings.

- Press the EQ/MODE button for 2 seconds to change EQ while a

song is playing. (Icon will be displayed on set’s LCD on setting EQ.)

c. How to switch between MP3 Player and Radio mode

- Press EQ/MODE button for 2 seconds on stop mode, the mode will

(MP PLAYER MODE RADIO MODE)

d. PLAY MODE Settings.

- Being in STOP moe, press the EQ/MODE button, the mode

will be changed between Repeat and Random mode.

(Icon will be displayed on LCD on setting.)

4. How to use the HOLD Settings (Icon will be displayed on LCD)

a. Move the Slide Switch to the HOLD position

b. HOLD disables the function of the buttons on the Remote and the

MP3 device.

How to upgrade mobiBLU Loader Plus

How to check the O/S and Manager version

You need to visit our website(http://www.mobiBLU.com) from time to

time to see if a new version of mobiBLU Loader Plus or a new version

of MP3 Firmware(OS) for upgraded functions.

1. Run the manager of mobiBLU Loader Plus.

2. Connect MP3 to your PC with USB cable.

3. Select “Help” => “About Manager Program” and Click it

4. You can see the version of OS and Manager.

If the MP3 is not recognized(connected) to your PC, the O/S version will

not displayed.In that case, please refer to “Manager Program Help” in the

installed mobiBLU Loader Plus.

a. Run “mobiBLU Loader Plus” and

b. Go to “Help” and select “How to reinstall the erroneously recognized

USB Drive”

1. How to Install the manager newly ;

a. You should download the latest version of manager, named as

mobiBLU Loader Plus” from our website.

b. Delete the currently installed mobiBLU Loader Plus first by

“Program

add & delete”.

c. Install the manager with the instruction on the process.

2. How to use the Manager Update ;

a. Run mobiBLU Loader Plus.

b. Connect MP3 to your PC with USB cable.

c. Check if your PC is on-line (connected with internet service)

d. Select “View” => “Manager Update” and Click it.

e. Click “Update” and complete the process.

Click!

f. Before the Manager Update, If the version is lower than 1.0.0.8,

please run the update once again.

How to upgrade Firmware(O/S)

Please visit our website(http://www.mobiBLU.com) to see if a new O/S is

released. You can check it with name of the patch file and its released

date.The file name should be “MP3 OS_xxxxx.zip”. “xxxxx” will be

OS version number.

1. Download the patch file(O/S installation file).

2. After uncompress zip file, MP3_xxxxxB.exe and MP3_xxxxxM

file will be shown up.

3. Connect MP3 to your PC with USB cable.

4. Excute MP3_xxxxxB.exe first.

5. You can see the OS version information and click the Next.

6. Please do not unplug the connected USB cable. This may cause a

serious problem.

7. Press "Finish" button to complete firmware update.

8. Execute MP3_xxxxxM.exe and go through 4-7 process again.

Click!

Click! Click!

Click!

Troubleshooting Problems

If you encounter any of the problems listed below, follow

the suggested solutions.

1. MP3 will not download digital files from the PC.

- Check the cable connection to the USB port.

2. MP3 will not play.

- Verify that the battery has been inserted correctly.

- Check battery discharge status.

3. The mobiBLU Loader Plus does NOT recognize the

hardware connection.

- Check the cable connection to the USB port.

- You may need to re-install the software. If "No memory

found" is shown again;

- Connect the USB cable to another USB port.

- Check if there is " TCC730_USB " in My computer Control

Panel System Device Manager.

4. If there is "! (or?) USB Driver" or "! (or?) Untitled Device",

USB driver was not installed correctly or is not properly

recognized. In this case it is necessary to re-install the USB

driver.

- To install the USB drivers, please refer to the Help file of the

program.

- If there are no contents related to USB in My computer

Control Panel System Device Manager, you may have to

check if your computer is compatible with USB driver.

- Check if there is a conflict with the hardware in the My

computer Control panel System Device Manager.

(Hardware conflicted with other hardware shows "!" or "?"

mark in front of the device name.)

- If you find a conflict between hardware, delete the conflicted

hardware and reboot computer.

- Please visit the Hyun Won Inc, website at www.mobiBLU.com

for the latest updates and software upgrades for the MP3

5. Installing the USB Driver manually

- Insert Software CD into CD-ROM Drive (Do not execute the

installation program.)

Connect the MP3 Player to PC with USB cable.

(If there is no USB driver to communicate between the MP3

and the PC, the "New Hardware Wizard" will appear on the

screen.)

- Proceed the installation following the on-screen instructions.

- When the location of the drive is asked, select the folder of

your CD ROM.

(When the installation finishes, The New Hardware Wizard

will appear on screen again.)

- Follow the on-screen instructions to complete the installation

of the USB driver.

Important Note

Please refer to “Help” of mobiBLU Loader Plus manager to see

Hyun Won DAH1200 MP 3 PLAYER WITH FM RADIO User Manual User s Manual H

Hyun Won Inc. MP 3 PLAYER WITH FM RADIO User s Manual H

USERS MANUAL

Navigation menu

Namespaces

Views

Navigation