Hyun Won DAH300 Gemboy - MP3 Player User Manual Manual

Hyun Won Inc. Gemboy - MP3 Player Manual

Users Manual for DAH300 MP3 Player

User’s Manual( Model Name : DAH-300 Brand Name : Hyun Won )FCC RF INTERFERENCE STATEMENTNOTE :This equipment has been tested and found to comply with the limits for a Class B digital device, pursuantto Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmfulinterference in a residential installation.This equipment generates, uses and can radiate radio frequency energy and, if not installed and used inaccordance with the instructions, may cause harmful interference to radio communications. However,there is no guarantee that interference will not occur in a particular installation.If this equipment does cause harmful interference to radio or television reception which can bedetermined by turning the equipment off and on, the user is encouraged to try to correct the interferenceby one or more of the following measures.- Reorient or relocate the receiving antenna.- Increase the separation between the equipment and receiver.- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.- Consult the dealer or an experienced radio, TV technical for help.- Only shielded interface cable should be used.Finally, any changes or modifications to the equipment by the user not expressly approved by the granteeor manufacturer could void the users authority to operate such equipment.--------------------------------------------------------------------ContentsWelcome to the MPgod ExperienceIncluded with your MPgodPC System RequirementsGetting Started with MPgodInstalling Software(MPgod Explorer)Using the Software(MPgod Explorer)How to download files to MPgodLCD WindowButton ControlHow to use the voice recording functionHow to upgrade Operating SystemHandling and Storing InstructionTrouble Shooting ProblemsInstalling the USB DriverWarranty ServiceWarranty CardSpecifications--------------------------------------------------------------------
Welcome to the MPgod ExperienceCongratulations on your purchase of the MPgod portable digital player - the flip type player with highfidelity sound. The MPgod contains 64MB of on-board memory that is easily expandable via theMultiMediaCardTM(MMC) flash memory slot. The MPgod also was designed with a programmable,upgradeable Digital Signal Processor (DSP) to support new audio formats and digital rights managementsystems. Please check the Hyun Won website at www.m-any.com for the latest software upgrades andaccessories. You are now ready to enjoy the world of digital audio with the most versatile digital audioplayer on the market today.--------------------------------------------------------------------Included with your MPgodA. 1 AAA BatteryB. Software CDC. USB Connection CableD. EarphonesE. User’s ManualF. NecklaceNote :Accessories and optional items are subject to change. Please check www.m-any.comfor the latest in MPgod accessories and software upgrades.--------------------------------------------------------------------PC System RequirementsThe following PC specifications are required for MPgod compatibility:Microsoft Windows98, ME or 2000 Operating SystemCD-ROM Drive with digital audio extraction supportPentium (or compatible) 200MHz or higher processor32MB RAM (64MB for Windows ME or 2000) or greater32MB free Hard Disk Space (more for digital audio file storage)Sound cardUSB port capability--------------------------------------------------------Getting Started With MPgodComplete the following steps to get started with your MPgod:1. Insert a fully charged battery into your MPgod.2. Launch the MPgod Explorer.3. Connect the USB port cable to the MPgod and then to the PC USB port.
4. Using the included software, download music to your computer from the Internet (or convert it todigital audio format from an existing CD). Using the MPgod Explorer, navigate to the folder that containsyour music files. Select the files you wish to transfer and drag them to the bottom portion of the window.Click on the transfer button located in the bottom right hand corner of the window. The files will transferindividually and the progress will be displayed in the Memory Contents Window.5. Disconnect the MPgod from the USB cable.6. Turn on the MPgod by Press Play button more than 2 sec. and play with headphones inserted bypressing Play button briefly.Note :Please do not attempt to use any other USB peripheral, such as a digital camera or scanner simultaneouslywith MPgod, MPgod Explorer as communication errors may result.-------------------------------------------------------Installing Software(MPgod Explorer)In order for the MPgod and your PC to communicate and transfer digital files, you must first install theMPgod Explorer by completing the following steps:Insert the Mpgod Explorer CD into the CD-ROM drive. The following screen should display:Note:If the setup file is executed automatically, follow the install program instructions. If the setup file is notexecuted automatically, browse the installation CD and double click on the instal.exe file on the CD-ROM file directory. (Example “D:\\mpgod.exe”, where D: is your CD-ROM drive) You can locate thesefiles by going to your Windows Start menu, and then Run.1) Click on Install button. The following page will display
2) Click on the Next button. The following page will display3) Enter your Name and the Company name and click on the Next button. The following page willdisplay4) Choose the directory for the MPgod Explorer and click on the Next button. The following pagewill display
5) Select the program folder and click on the next button6) Verify the Setup details and click on the next button. Once you have done these steps, it willcomplete the installation and bring you back to the main page displayed.7) Once the installation of the MPgod Explorer finishes, click the shortcut icon on the desktop orclick on the Windows Start menu, then Programs, then the shortcut to run the MPgod Explorer.Note: If a rebooting message displays during setup, install again after rebooting the computer.--------------------------------------------------------------------Using the Software(MPgod Explorer)Important NoticeInstall program PRIOR TO connecting device with PC.In case the device is connected without installing program, the device will not be recognized because thedevice driver could not be found.The main screen of the MPgod Explorer controls music file downloading and uploading.
A. File Selector: This enables you to view files by type.B. File List Window: This window displays the files contained in the given folder enabling you toselectively download files to flash memory and/or MMC memory.C. Memory Contents Window: This window enables you to check the file title, size, type and downloadstatus of the MMC and on-board flash memories.File order change1) Select a file to be moved.2) Drag & Drop the selected file to the desired position.Note: File order can only be change by moving 1 file at a time.D. Transfer Files Button: This button begins transferring selected audio files to the player.E. Memory Status: This indicates the amount of memory available, the amount of total memory andmemory connection status. This window may indicate "No Memory Found" in the following cases:- The MPgod is not connected or the power is switched off.- MMC memory is selected when a MMC memory card is not inserted into the player.F. Folder Window: This window enables you to select audio files more easily by allowing you tobrowse specific folders. The selected folder contents are displayed in the File List Window tothe right.G. Functional Icons:Selects the on-board memory (flash memory) to displaySelects the removable memory (MMC memory) to displayAdds the selected files to the selected memory. Selected files are placed in “Ready toTransfer” status in the memory contents window.
Uploads of the selected files on the player memory to the selected PC folderDeletes selected files on the selected memoryFormats selected memory Note: This will erase all files on the selected memory.a. Normal Format: The "Normal Format" is, in essence, a quick 'clearing' of all the dataon the memory card. It accomplishes the same thing as selecting all songs and deletingthemb. Low-level Format: A "Low Level Format" is a longer procedure as it checks the disksector by sector for any problems and repairs them if it finds them. This is somewhatsimilar to the 'Scandisk' program and requires that no other applications are openedduring the formatting procedure.Refreshes view of selected memoryCancels file transfer between player and PCTransfers files from the memory contents window onto the player.--------------------------------------------------------How to download files to MPgodWhen downloading to player using the MPgod Explorer:1. Select the player memory to download and store audio files onto (either on-board Flash memory orMMC when using removable MMC flash memory cards).2. Highlight files to be downloaded in the File List Window using the Folder Window to browse for PCfolders containing audio. You may select files one of 3 ways:a. You may drag & drop individual files from the File List window to the Memory Contents Windowb. You may select multiple audio files by holding down the CTRL key while clicking the left-mousebutton on each file you wish to download to the player then drag and drop the selection of files as abovec. You may press the "F5" key or "Add" icon after highlighting each file.The selected files will appear in the Memory Contents Window with "Ready to transfer" listed under thestatus column.3. Click the "Transfer" icon to start downloading selected files to player memory.4. To cancel a download in progress click the "Cancel" icon.5. Close the MPgod Explorer before disconnecting the USB cable.Note : If there is no audio output after disconnecting the USB cable, open the battery door briefly toexpose the battery, then close the battery door and press Play with the power switch on. Doing this willfully "reboot" the DSP and restore normal operation.The MPgod Explorer and the Audible Manager can not be open at the same time, a communication errorwill result. If this occurs, close both software managers unplug the device. Re-initialize the device byturning it off then on again, re-connect the device via the USB cable and select ONE of the softwaremanagers to run.The Windows Media Player and Audible Manager software included with the MPgodhave online instruction manuals that may be printed out once they are installed.--------------------------------------------------------------------Button Control
Button CurrentMode Buttons Operation to be expected RemarkStop Press power offSTOP Play Click entering into Stop modeStop Click selecting next track display on LCDClick selecting next track display on LCDPress search along tracks at 2X speedFF PlayPress entering into Stop mode from last trackStop Click selecting previous track display on LCDClick going to starting point of played track in case of playless than 5 secPress selecting previous track in case of playless than 5 secREW PlayPress search along tracks at 2X speed in case of playmore than 5 secClick increasing volume by one stepVOL+ Play Press increasing volume successively(4 steps/sec)30 steps of volume(16th step default)Click decreasing volume by one stepVOL- Play Press decreasing volume successively(4 steps/sec)30 steps of volume(16th step default)Press entering into Voice Recording mode Record modeor Erase modeClick starting voice recording In Record modeClick starting erase of ADPCM file In Erase modeStopClick erasing filesPress setting and deleting bookmarkRECPlay Click calling for bookmarkPress selecting Play mode èNormal – RPT1 – RPTALL- Random – Random ALL Setting play back position(Normal default)Click selecting Equalizer mode èFlat – Dance – Latin – Jazz – Rock - User User(band 1~5)MODE PlayPress Entering into user Equalizer mode èBand 1 – Band 2 – Band 3 – Band 5 – Band 5 Selecting byclicking VOL+/-HOLD Play orStop -Disabling or enabling button control PLAY button onlyfor power onworks in Hold.PLAY Poweroff Press turning on the device and entering intoStop mode“This is ..”displays on LCD.Stop Click Starting play backPlay Click Stopping play back(entering into Pause mode)Press Selecting played filesè ADPCM – MP3/WMA* Press : Pressing and holding more than 2 sec* Click : Pressing brieflyNote : (Position of play back) : When power is off automatically in Stop or Pause mode play restarts from lastplayed position whereas. If the device is turned off by user or battery is removed, play starts from the firsttrack.--------------------------------------------------------------------LCD Window Display
1. Total title # / Current title order2. Currently set Equalizer Mode3. Hold Status4. Indication of MMC titles play5. Title name, current Mode(Play, Pause, Stop, FF, REW)6. Indication of Voice Recording7. Played time of current title8. Repeat Play Status(on-repeat of 1 title or all in order or all in random off-stop after playing all title in order or random)9. Battery Charge Status10 Bookmark Function--------------------------------------------------------How to use the voice recording functionThe MPgod features a built-in omni directional microphone for digital voice recording. The microphoneis located on the front side of the player. The MPgod records in ADPCM format and will play backrecordings. Typical voice recording capacity is approximately 4.3 minutes per 1 MB of free flashmemory.ADPCM voice-recorded files are stored only on the on-board flash memory, and not on the MMCmemory. The voice-recording feature will record continuously when activated, and will use all availableflash memory. When all available flash memory has been filled, voice recording will stop automatically.1. RECORDINGPress REC button more than 1 sec. to select Voice mode in Stop mode(Voice and Erase mode toggle whenREC button is pressed more than 1 sec. in Stop mode), which is set by turning Switch on or pressing Stopbutton.Press REC button briefly to start voice recording in Voice mode, then Voice Recording will activate.Press the “STOP" button to stop recording.2. REPLAYPress Play button more than 1 sec. to select ADPCM play back mode in Stop Mode(ADPCM andMP3/WMA play back modes toggle whenever Play button is pressed more than 1 sec. in Stop mode).Press Play button briefly to start play back of the recorded ADPCM files.Press Stop button to stop play back of ADPCM files.3. DELETING (directly from the device)Press REC button more than 1 sec. to select Erase mode in Stop mode(Voice and Erase mode togglewhenever REC button is pressed more than 1 sec. in Stop mode), which is set by turning Switch on orpressing Stop button.Press REC button briefly to enter into Erase mode.Search the ADPCM file to be deleted by pressing FF or REW button. When the target file is displayed
press REC button briefly, then the selected file will be played for 10 sec..Press REC button briefly again while playing, the selected file will be erased. If the RECButton is not pressed or a button other than REC button is pressed while playing, theplayed file is not erased and mode changes to Stop automatically.NOTE:Only ADPCM files are deleted by the above-described method.4. File Conversion (ADPCM to .wav file)Voice files recorded by the device can be converted from ADP to WAV format or reverse by selecting“Converter” from the View menu. If the voice recording files have been downloaded to the computerusing the MPgod Explorer, then the dialog window below can be used when the device is not connected.
You can also convert WAV to ADP files during downloading or uploading when device is connected. Youcan also convert ADP to WAV files directly when uploading ADP files from the on-board memory to thePC using the dialog window below. Select the ADP file on the player to be uploaded and the folder thefile to be uploaded into. Begin uploading the ADP file and the dialog window below will openautomatically. After selecting your file conversion options and converting the file, you may choose torename the file.--------------------------------------------------------------------How to upgrade Operating SystemYou can update the Operating system of the device.Local operating system update means OS update of device by installed program.Network operating system update means OS update of device by the latest version ofOS from the Server Computer.If Network operating system update is done, the OS saved in program is automaticallyUpdated.Open MPgod Explorer and connect MPgod to your PC. Click “Edit” menu and select “OS update”, thenyou can perform Local OS update or Nework OS update following the instruction of below dialoguewindow.
--------------------------------------------------------Handling and Storing InstructionPlease note the following information when using the MPgod :Unit may be damaged if struck or crushed.Keep out of direct sunlight.Keep away from dust and dirt.Clean with a dry, soft cloth.Store in a cool dry place.Do not store your MPgod around a television set due to the magnetic field interference that may resultwith the TV.Do not squeeze the MPgod body. Excessive pressure on the body could cause damage to the internal partsand cause malfunctions.Do not touch or handle the tape simulator belt in the bottom of the unit, doing so may cause malfunctionswhen used in a cassette deck.Do not expose the MPgod to extreme temperatures, such as leaving it in a car in hot weather.--------------------------------------------------------------------Trouble Shooting ProblemsThe MPgod will not download digital files from the PC.Check the cable connection to the USB port.The MPgod will not play.Verify that the battery has been inserted correctly.Check to see if the battery charge is enough.Verify that the MMC card is inserted properly, if applicable.The Mpgod Explorer does NOT recognize the hardware connection.
Check the cable connection to the USB port.You may need to re-install the software.1) If “No memory found” is shown again;- Check if the USB cable is connected to device and the PC properly.- Connect the USB cable to another USB port.- Check if there is “USB Flash Memory Controller Driver” in My computer -> Control Panel ->System -> Device Manager.)If there is “(or?) USB Driver” or “(or?) Untitled Device”, USB driver was not installed correctly or is notproperly recognized. In this case it is necessary to re-install the USB driver. To install of USB drivers,please refer to “The inability to get access to Memory” in Help menu of program.- If there are no contents related to USB in My computer -> Control Panel -> System-> DeviceManager, you may have to check if your computer is compatible with USB driver.Check if there is conflict between hardware in My computer -> Control panel -> System -> DeviceManager. (Hardware conflicted with other hardware shows “!” or “?” mark in front of the device name.)If you can find conflict between hardware, Delete the conflicted hardware and reboot computer.Please visit the Hyun Won website at www.m-any.com for the latest updates and software upgrades forthe MPgod--------------------------------------------------------------------Installing the USB DriverIf a USB driver to control MPgod already exists in PC, there is no need to install a new driver.Insert Software CD into CD-ROM Drive (Do not execute the installation program.)Connect the DMPgod to PC with USB cable.(If there is no USB driver to communicate between the MPgod and the PC, the "New Hardware Wizard"will appear on the screen.)Proceed the installation following the on-screen instructions.When the location of the drive is asked, select the folder of your CD-ROM.(When the installation finishes once, The New Hardware Wizard will appear on screen again.)Follow the on-screen instructions to complete the installation of the USB driver.Important Note:When connecting the cable with MPgod player, ensure the correct orientation of the connector end, anddo not force the connector. Improper connection with the USB cable can cause damage to the computerand/or the MPgod.--------------------------------------------------------------------Warranty ServiceCustomers are entitled to warranty service for a period of one (1) year from the date of purchase.Warranty service does not apply to defects resulting from customer fault or acts of God.Non-warranty service shall apply to defects resulting from:1. Infiltration of foreign matter, such as water, liquid, or sand.2. Breakage due to dropping or severe impact.3. Damage to or deformation of the outer case caused by organic solvents, such as benzene.4. Use of parts other than those certified by the manufacturer.5. Loss or breakage of any parts or components caused by unauthorized disassembly.6. Repair or modification done by any persons other than manufacturer authorized personnel.7. Acts of God, such as lightning, storm or flood.Please visit Hyun Won website at www.m-any.com for more information.--------------------------------------------------------------------Warranty Card
--------------------------------------------------------SpecificationsNecklace and Flip type Digital Audio Player- Size (WxHxD) : 56x56x20mm- Weight (w/o battery) : 50 g- Memory(on-board) : 64 MB- Memory Expansible with MMC Card- Power Supply : 1 x AAA Battery- Earphone Output : 7 mW max.- S/N Ratio : 90 dB- Frequency Response : 20Hz ~ 20 KHz- PC Interface : USB Port- Required PC OS : Windows 98, ME, 2000

Navigation menu