Hyun Won DAH510 MP3 Player User Manual EMISSION TEST REPORT

Hyun Won Inc. MP3 Player EMISSION TEST REPORT

users manual

Test Report No.: GETEC-E3-02-023 FCC Class B Certification APPENDIX H : USER’S MANUAL EUT Type: MP3 Player FCC ID : PCMDAH510
Owner s ManualS/N : D01011010121Voice Recorder& Music EncoderMulti Format Digital Audio PlayerDAH-510Phone: 82-54-338-6000Facsimile: 82-54-337-3075Homepage: http://www.m-any.come-mail: many@hyunwoninc.com333-1 Shindae-Ri, Kumho-Eup, Youngcheon-City, KyoungBuk770-803, South Korea
Safety Warning and PrecautionPlease follow all warnings and safety precautions in this part to prevent any risk ofelectronic shock or property damage.This symbol indicates the possibility of the personal death or personalhazardous damage.This symbol indicates the possibility of the personal injury hazardor of the product damage.WarningCautionIt indicates 'Do not disassemble.It indicates prohibition.It indicates 'Must follow'. It indicates 'Do not touch'. CautionDo not disassemble or modify. (t could cause malfunction.)Avoid dust or moisture. (Failure to do so could causethe product damage.)Never touch the product with wet hands. (When the product is charged, doing somay cause electric shock.) Keep the product out ofdirect sunlight.Safety InstructionsWarningTo reduce danger of fire or electric shock, do not expose the product to rain ormoisture.Transmit in any WMA or MP3 format music files without permission of the copyright owners is an infringement of copyright.The software program loaded in the operating CD-ROM is approved for only thepersonal use.To keep the qualified functionDo not use the product under the hazardous conditions, such as extremelyhigh or low temperature area, dusty area, or excessive wet area.Do not place the product in the bathroom, near the heater, or in a carparked in the direct sunlight.Keep the batteries away from the metal objects, such as coins or keys when youcarry them in your pocket.The friction between the metal objects and the batteries could cause fire.Keep the product from being struck or crushed by the hard or sharp materials. We are not guarantee lost of data in player in case of customer's carelessness.( Please do backup the important data)Avoid sudden shockDo not drop the product or keep it away from sudden shock or force.If this rule is ignored, the product could be seriously damaged.Precautions on headphone useListening to music in the high volume for long periods of time couldcause hearing problems.Do not use headphones when driving a car or riding a bicycle or a motorcycle.Please use headphone or stop using unit on potential dangerous situation,Careful handling is also needed.The headphone which functioned as an ear must be attached to a long cord.The cord must be left around back of a neck.
Contents1 - Welcome to the Digital Audio World with Ultrasm2 - What is a Digital Audio Player (MP3 Player) ?3 - PC System Requirements and Accessory4 - Product Specification5- Installing Software(M-Any Manager)7- How to connect Ultrasm to your PC8 - How to use M-Any Manager10- How to format the memories of built-in 12 -How to download files from your PC14 - How to upload files from Ultrasm15 - Troubleshooting Problems17 - Getting started with Ultrasm18 - Ultrasm LCD Display19 - Repeat & Play Mode20 - How to set User EQ Mode21 - How to set EQ MODE and use Fast Searching22 - How to erase files without software23- How to record Voice and Music25- How to use Removable battery compartment26 - Handling and Storing Instructions27 - Remote Controller Function30 - LIABILITY FOR DAMAGES TO THE CUSTOMERS31 - WARRANTY FORM32 - MANUFACTURER INFORMATION33 - FCC RF INTERFERENCE STATEMENTCongratulations on your purchase of the Ultrasm.Ultrasm is a Digital Audio Player(more than MP3 player) with specialadditional functions of Voice Recorder & Direct Encoder(directly recorda music from normal audio players through a encoding cable withoutcomputer).The Ultrasm contains 64/96/128/256MB of on-board memory. TheUltrasm also is designed with a programmable and upgradeableDigital Signal Processor(DSP) to support MP3 files as well as newaudio formats and digital rights management systems. Please checkthe Hyun Won website at www.m-any.com for the latest softwareupgrade.You are now ready to enjoy the world of digital audio with the mostversatile digital audio player on the market today.Welcome to the Digital Audio World with Ultrasm 1
What is a Digital Audio Player (MP3 Player) ?MP3 is a well known, high quality digital audio format. MP3 files can becompressed up to 12 times the original wave file size.MP3 is one of Audio Formats and 'MPEG Audio Layer-3'.MPEG(an expert group who researches for audio/video compression) is theacronym for Moving Picture Experts Group.This group has developed compression systems used for video data. The MPEGcompression system includes a subsystem to compress sound, called MPEGaudio Layer-3. We know it by its abbreviation, MP3. WMA(Windows Media Audio code) is the highest quality in terms of a sound andmusic. WMA provides all type of the best sounds from 8kHz to 48 kHz. WMA filescan be compressed up to 50% the original MP3 file size and can sound as goodas an MP3 file.What is a Digital Audio Player (MP3 Player) ?MP3 Player is a portable digital audio Player that plays MP3 files without requiringthe use of tapes or CDs.MP3 Player is a palm sized audio device that uses nomoving parts for playback and lets you enjoy high qualitysound that uses MPEG1 Layer 3 compression methodfor quality internet audio. MP3 Player uses one or two flash memory cards, whichare expandable to up to 256MB. You can make your own CD quality MP3 files from CDor WAV making use of the MP3 encoder software ordirect encoding system built in the device of Ultrasm.CD Data MP3 Data1/12CompressionInternet PCDigital audio file Digital audio fileDigital Audio Player1/2CompressionWMA Data2Digital Audio PlayerNormal Audio PlayerPC System Requirements and AccessoryA. Software CDThe following PC specifications are required for Ultrasm compatibility Microsoft Windows98, ME, 2000 or XP Operating SystemCD-ROM Drive with digital audio extraction supportPentium (or compatible) 200MHz or higher processor32MB RAM (64MB for Windows ME or 2000) or greater128MB free Hard Disk Space (more for digital audio file storage)USB port capabilityUltrasm AccessoryB. Earphone C. Owner's ManualD. Line-in Cable(Direct Encoding Cable)H. Carrying Case I. Battery Pack+AAA1.5Vbattery 1EAJ. Remote Controller(Option)(Option)F. A/C ChargerG. USB CableNote Accessories and optional items are subject to change. Please checkwww.m-any.com for the latest in Ultrasm accessories and softwareupgrades.E. 1.2V RechargeableNi-MH battery 1EA3
Model Name : UltrasmBasic Function : Digital Audio File Playback, Voice Recording, Direct MP3EncodingMemory(On-board) : 64/96/128/256MB,Dimension (WxHxD) : 54x77x9.8mmWeight (except battery) : 55gPower Supply : 1.2V Rechargeable Ni-MH or Normal AAA 1EAEarphone Output : 7mW maxs/n Ratio : 90dBFrequency Response: 20Hz ~ 20KhzPC Interface : USB ConnectionOther features- Voice recording : 8hours & 40 minutes (128MB)- Direct encoding : 2hours (128MB)- Multi CODEC Support : MP3, WMA, ADPCM and other format by O/Supgrade- High speed file transfer(USB Port) : Max. 2.5Mbps- Play time : 8~10hours(Ni-MH 1EA + AAA 1EA)- Firmware Upgrade Solution using TI chip- EL LCD Solution- Dual Power Supply : Rechargeable battery inside of the body and RemovableAAA battery compartmentProduct Specification 4Installing Software(M-Any Manager)In order for the Ultrasm and your PC to communicate and transfer digitalfiles, you must first install the M-Any Manager by completing the followingsteps:1. Insert the M-Any Manager CD into the CD-ROM drive. The following screen should display:2. Follow the directions when the setup program is being automatically installed.If the program is not installed automatically, search for the install.exe file in theCD-ROM drive and double click on it.5
Installing Software(M-Any Manager)3. Please click the icon indicated by arrow on each screen then you completethe installation process.4. When the installation is completed, the icon, 'M-Any Manager'will show up on the background screen.Note If a rebooting message displays during setup, install again after rebootingthe computer. NextNextNextNextFinishFinish6How to connect Ultrasm to your PCPlease make sure that you finished installation process and device selectionbefore connecting the USB cable.To make the Ultrasm and your PC share Audio Files(Up & Down Load),connect Ultrasm with the USB cable which is supplied in the accessories, asfollowing picture UltrasmDATA (USB Port)USB PortComputerNote USB means Universal Serial Bus connecting a device(hardware) to a PC.7Caution !The power of the deviceautomatically turns offwhen the device isconnected to PC.USB CableBe careful of theinsertion direction
How to use M-Any ManagerA.File filterB. File list windowC. Memory windowD. Button to transmit filesF. Memory statusE. Folder windowStart the manager of 'M-Any Manager' by double clickingon shortcut icon on the background screenA. File filter Makes it possible to select files by type.B. File list windowThis window enables the selective downloading of files included in the givenfolder to the flash memory or MMC memory.C. Memory windowThis window shows the title, size, type of file and the downloading status ofMMC memory card.D. Button to Transmit FilesThis button is for transmitting selected music files to the player.E. Folder windowThis window is for browsing the files in a certain folder to easily select musicfiles. If files are selected, they will show up in the file list window.F. Memory statusThis shows the remaining memory, the entire memory and the connection statusof memory. In the following cases, a message 'No Memory Found' will appear.When having selected MMC memory when the memory card is not put into theplayer.8Selects the basic(flash) memory.Adds selected files to the selected memory card.The selected files will appear "ADD" in the memory window.Uploading selected files to the selected PC folder.Deletes the selected files from the memory.Formats the memory card. In this card, all selected files in the memorycard are deleted.The selected memory is refreshed.The transmission of file between the product and PCG. Functional IconHow to use M-Any Manager 9
How to format the memories of built-in and MMCWhen wishing to format the memory card or to erase all files in thememory card, clicking on 'Format' button will initialize the memorycard. However, if formatting the memory card, all settings including'play back position' will be also initialized.1Run M-Any Manager and connect thecommunication cable to the digitalaudio player and then select thememory card to format.2Select the type of formatting andclick the mouse and then theconfirmation dialog box forformatting will appear.3Press 'Yes' button and theformatting will be executed. Whenthe formatting is completed, thedialog box for confirming theformatting will show up.4Pressing 'OK' button will completethe format.10Normal format : Deletes only the information saved in the memory card ofthe audio player and the deletion is quickly done.Low level format : Like formatting the entire floppy disk, the entire memorycard is initialized and so it takes some time.Note Once formatting begins, do not stop the process. Removing thecommunication cable to stop the process by force can give some error to theoperation of the digital audio player.Normal format / Low level formatYou can also format the memories using edit menu button,as under How to format the memories of built-in 11
How to download files from your PC1Buy the MP3 files or any available audio files that you want from DCcommunications or internet sites and save them on your PC. 3Connect Ultrasm to your PC using USB cable.2Run the "M-Any Manager" by clicking shortcut icon on the background.4Select a memory on the menu bar which the desired files are to bedownloaded to.When downloading the desired files from PC to Ultrasm, follownext steps ;Click!5Select a folder where the files to be downloaded are saved so that the filesare displayed on the file list window. Then select the desired files.Click "ADD"icon on the menu bar to display the files on the memory contents window as"ready to transfer".6Press 'Transfer'(F6) in the bottom and the selected files will bedownloaded.NoteFiles can be downloaded by using Drag & Drop.Click!How to download files from your PC112 13
How to upload files from UltrasmTo upload filesTo upload the Audio files or data files from Ultrasm to your PC, carryout the following descriptions.Note : M-Any Manager does NOT upload music files (MP3 and WMA) to yourPC because it could infringe a copyright.Select a directory or folder on the PC Directory display panel. (The files of the selected directory or folder will be displayed onthe PC Files display panel)Select files in the file list of Memory Window and click uploadbutton. Then, the selected file(s) will be up-loaded into theselected directory or folder of your PC.Note You can upload files by Drag & Drop as well.When up/downloading files to or from the digital audio player,Files other than digital audio files can be uploaded or downloaded.Uploading/downloading is possible when batteries are not in the digital audio player,Files cannot be played on the digital audio player during communication.Noise can be heard through an earphone during communication.Other USB communication cables than the provided USB cable should not be used.14If you face with the following problems, you can fix them referring underarticles ;1. Ultrasm will not download digital files from the PC.- Check the cable connection to the USB port.2. Ultrasm will not play.- Verify that the battery has been inserted correctly.- Check battery discharge status.- Verify that the MMC card is inserted properly, if applicable.3. The M-Any Manager does NOT recognize the hardware connection.- Check the cable connection to the USB port.- You may need to re-install the software. If "No memory found" isshown again;- Connect the USB cable to another USB port.- Check if there is "USB Flash Memory Controller Driver" in Mycomputer Control Panel System Device Manager.4. If there is "!(or?) USB Driver" or "!(or?) Untitled Device", USB driverwas not installed correctly or is not properly recognized. In this case itis necessary to re-install the USB driver. - To install of USB drivers, please refer to "The inability to get access toMemory" in Help menu of program.- If there are no contents related to USB in My computer ControlPane System Device Manager,- you may have to check if your computer is compatible with USBdriver.Troubleshooting Problems 15
- Check if there is conflict between hardware in My computer Controlpanel System Device Manager.(Hardware conflicted with other hardware shows "!" or "?" mark in frontof the device name.)- If you can find conflict between hardware, delete the conflictedhardware and reboot computer.- Please visit the Hyun Won website at www.m-any.com for the latestupdates and software upgrades for the Ultrasm.5. Installing the USB Driver manually- If a USB driver to control Ultrasm already exists in PC, there is noneed to install a new driver.- Insert Software CD into CD-ROM Drive (Do not execute theinstallation program.)Connect the Ultrasm Player to PC with USB cable.(If there is no USB driver to communicate between the Ultrasm andthe PC, the "New Hardware Wizard" will appear on the screen.)- Proceed the installation following the on-screen instructions.- When the location of the drive is asked, select the folder of your CD-ROM.(When the installation finishes once, The New Hardware Wizard willappear on screen again.)- Follow the on-screen instructions to complete the installation of theUSB driver.Important NoteWhen connecting the cable with Ultrasm, ensure the correct orientationof the connector end, and do not force the connector. Improperconnection with the USB cable can cause damage to the computerand/or the Ultrasm.Troubleshooting Problems 16Complete the following steps to get started with your Ultrasm 1. Make sure the battery is fully charged and insert it into yourUltrasm.2. Connect the USB cable to the Ultrasm and the PC USB port.3. Using the software, download music to your computer from theInternet or convert it from an existing CD. Then, download audio files to your Ultrasm.4. Disconnect the Ultrasm from the USB cable and power on Ultrasmby pressing the "play button" for 2 seconds.5. Press play button again. Now you can enjoy digital audio from yourUltrasm with earphone.Ultrasm additional Function.1) If the player senses it is not used for 5minutes, it will automaticallyenter Power Save mode.2) The Ultrasm will play first song when the power is on from powersaving mode.The Ultrasm will resume play from the exact point in the audiotrack that was playing when the power is on from power off.Caution- Connect earphone jack into Ultrasm completely.- If you can't listen music when power is on after separating USB cable,please press Play again after uncovering the battery pack for a whileand cover that.It makes DSP booted again and it plays properly.- Please don't use Ultrasm with another USB device such as digitalcamera and scanner to avoid software's communication error.- Please check our web-site to see more information.(http://www.m-any.com)Getting started with Ultrasm 17
Ultrasm LCD Displaya. Title of a songb. File typec. Current mode (Play or Pause )d. EQ typee. Playing timef. Volume levelg. Track No.h. Hold statusI. Normal Mode : play all titles and stop( ) Repeat 1: repeat play of current title( ) Repeat All : repeat play of all titles in order( blinking) Random : one time play of all titles in random( blinking) Random All : repeat play of all titles in randomj. Voice & Music recoding statusk. Battery statusabcde fghi j k18 Repeat & Play ModeRepeat Mode 1) When music play, press the mode button for 2 seconds, LCD will showRepeat Mode. 2) Press the mode button shortly again. LCD will show Repeat A- 3) Press the mode button again to set the B. So you will listen between Aand B repeatedly.If you don't set the B, Ultra Slim will set the B in the end of songs.4) If you press FF/REW or STOP, Repeat Mode will be canceledPlay Mode Press the mode button to change play mode. The mode will be changed to NORMAL REPEAT 1 REPEAT ALLRANDOM RANDOM ALL NORMAL in order by pressingmode button shortly.After 1 second in selected mode, name of mode will disappear. It meansmode sets.19
User EQ Mode1. It works only in playing mode. Press the mode button for 2 seconds to go the Repeat Mode and press thebutton long once again. LCD will show User EQ setting screen.2. You can set User EQ with the buttons of REW/FF, VOL. UP/DOWN.3. If you press stop button to cancel the mode, It will show the title of a song andif you press the mode button long enough, it goes to Repeat Mode and you can set the Repeat Mode A-B.4. How to control User EQIf you press Mode Button long enough in User EQ condition, you will see 5bars on LCD screen. At this moment the highest one of first bar is twinkling(stand by for Band 1setting)Have a choice of band by pressing FF/REW.You can control band by Vol +/- (-15 +15 : 31 Steps)After operating, you can stop User EQ Mode by pressing stop button.How to set User EQ Mode1220 How to set EQ MODE and use Fast SearchingEQ MODE 1) You can set this mode only in playing mode.If you press Play Button long enough inPlaying mode, EQ setting will be changed inorder. 2) It goes in this turn. LIVE JAZZ LATIN ROCK USER LIVE(Default isLive)Fast Searching 1)When you're playing a music, press theFF/REW BUTTON long enough to make it doFF/REW SEARCHING 4 times faster. 2) After the end of the song, FF FASTSEARCHING will work by the RANDOMREPEAT MODE. ON REW FASTSEARCHING it plays again on first part ofsong.21
How to erase files without software 221/3 2Erase Mode1) You should start at the stop mode. 2) Press the Rec Button long enough three times to go to Erase Mode.Then press the Rec Button shortly, it will display the title of song whichwill be erased.3) And you can choose the song that you want to erase by FF/REWButton.And then if you press Rec Button 'Erase? Yes:Rec No:Others' will bedisplayed .- If you press Rec Button shortly 'Erasing' will be displayed and the file ofthe song will be erased. - If you press other buttons except Rec Button, Erase Cancel will bedisplayed and it means Erase is canceled. Erase FunctionThis function makes it possible to erase a file without connecting to M-Any Manager.How to record Voice and Music 23Record MODE1) You should start at the stop mode.2) If you press the Rec Button long enough LCD screen will showVOICE RECORD press it long again and It displays "MUSIC RECORD" "ERASE MODE" "VOICE RECORD" in order.Record Voice1) You should start at the stop mode.2) Press the Rec Button long enough to go to Voice Record Mode. 3) Press the Rec Button shortly and Voice Recording starts. (You canfind Recording Icon and LCD display "Recording..." )4) Press Stop Button to stop recording.(loop back applied)5) Press Play Button to play the recorded file and it will be displayed asV001,V002,V003...And then press again the Rec Button long enough to go to MusicRecord Mode. Now press the Rec Button shortly to start musicrecording.
What is loop back?We can listen to the recording music while we are recording the musicby this function.(The quality of sound might be a little bit noisy eventhough the quality of song which is recorded is good. How to record Voice and Music 24Record Music (Direct Encoding)1) Put an end of "line in cable" into the earphone jack of the normal audio player and the other one of "line in cable" into the "in put jack" of the Ultrasm.2) Press Rec Button long enough twice to go to Music Record Mode.3) Press again the Rec Button again to start recording music, This is called "Direct Encoding".(LCD screen shows recording icon turns on, it displays "Recording..")4) Press Stop button to stop recording (loop back applied)5) Press Play Button to start the recorded file and the file will be displayed asE001, E002, E003 How to use Removable battery compartment 25This is how to use removable battery compartment.1) Put the pack properly on bottom of the player.2) Screw a bolt( ) into a tie.3) Uncover the battery pack and put the battery properly into it.
Handling and Storing Instructions 26This is the way to use Ultra Slim with your care.- Unit may be damaged if stuck or crushed.- Use a carrying case when carrying and using your Ultrasm.- Keep out of direct sunlight.- Keep away from dust and dirt.- Clean with a dry, soft cloth.- Store in a cool dry place.- Do not store your Ultrasm around a television set due to the magnetic fieldinterference that may result with TV.- Do use only USB cable which is included in the product box.- Do not expose the Ultrasm to extreme temperatures, such as leaving it in a carin hot weather.Remote Controller Function 27PLAY ButtonPress PLAY button for play music and will display file name on the LCD. Press PLAY button while play mode pause music and will display "Pause "on the LCD.Press Play button for two seconds while contents is playing to scroll through alist of Equalizer options (LIVE, DANCE, JAZZ, LATIN, ROCK, USER EQ)STOP ButtonPress the STOP button to stop musicPower Off : Press the STOP button for "two" seconds to turn off playerFF/REW ButtonMove the toggle switch to the FF or REW position and hold for at least 2seconds. Contents will FF or REW at 4x regular speed until you release theswitch.The content will REW/FF until the beginning/end of the file is reached at thebeginning/end of the file, the function will stop and the content will beginplaying at the beginning of the file/ next track The LCD timer will display yourprogress as you REW/FF through a track.LCD WINDOWVOLUME(0~30)TITLEFile TYPEAUDIBLE READY FORMATPLAY MODENO. OF SONG PLAYING NO. OF TOTAL SONGSBATTERYEarphone JackVOL+VOL-STOPPLAY/PAUSE RECMODEREW/FF(TOGGLE SWITCH)LCD Window HOLD
Remote Controller Function 28Next / Previous TrackQuickly move and release the TOGGLE SWITCH to the FF or REW positioncontent will skip to the next track.This function can be preformed while in Play or Stop mode.Track numbers will change on the display while performing this function.Volume + / Volume -Press the Vol +/ Vol- button to increase/decrease the volumeVolume is increased/decreased one step at a time.There are 0-30 levels for the volumeThis function can be preformed in Play, Stop, and pause mode.Mode ButtonPress the MODE button to scroll through a list of Play options.Normal, Repeat, Repeat All, Random, Random allPress the mode button for "two" seconds to scroll through a list of Equalizeroptions (Live, Rock, Latin, Jazz, and User EQ).Section Repeat1. Press the MODE button for "two" second while song is playing, "REPEATMODE" will display on the LCD.2. Press the MODE one more time, "Repeat A-", and press the MODE buttonone more time "Repeat A-B" will display on the LCD and automaticallyselected section A-B will be played repeatedly.3. To cancel this section repeat, press the REW/FF toggle switch once quickly"NOTE: this function is to hear a certain section of a file repeatedly"User EQ SettingsPress the REC button for "two" seconds in STOP mode "four" times (or in Playmode "one" time), User EQ will display on the LCD.Press the REC button once quickly, Bass 1 will display on the LCD with a setvalue. Set the Value (-15 ~ +15 in each Bass) with the Vol+ / Vol- buttons.Move to Bass 2, Bass 3, Bass 4, and Bass 5 by moving the REW/FF toggleswitch.Remote Controller Function 29REC ButtonVoice Recording1. Press the REC button for "two" seconds, "VOICE-REC" will display on LCD.(Must be in STOP mode for recording.)2. Press the REC button again, shortly"Rec Start" and "V001.ADP, V002.ADP,..." will display in the LCD, you can begin speaking/recording.3. Press the STOP button to end recordingMusic Recording1. Press the REC button twice for "two" seconds, "MUSIC-REC" will display onLCD. (Must be in STOP mode for recording.)2. Press the REC button again, shortly"Rec Start" and "E001.MPE, E002MPE,..." will display in the LCD, you can begin speaking/recording.3. Press the STOP button to end recordingFile Erase1. Choose file to erase in Stop mode, then Press the REC button for "two"seconds, "three" times, "Erase Mode" will display on the LCD.2. Press the REC button will show file name on the LCD, then Select the fileyou wish to Erase by searching with REW/FF button.3. Press the REC button once quickly, "YES-REC" will display on the LCD4. Press the REC button once quickly again, the selected file will be erasedand "Erasing" will display on the LCD.Playing TimePress REC button while content is playing, length of music will display on theLCD.Hold1. Slide the HOLD button to the right, a Key will display on the LCD - this willlock all of the buttons from functioning.2. Slide the HOLD button to the Left and the Key will disappear from the LCD -All the buttons will function again.
This liability is one of the standards recommended by a manufacturer and could bevarious depending on the market environments of each country.Defects in materialsand workmanship occurring under normaluse(within theretention period of parts)Defectsresulting from thecustomer's faultsIf a defect resulted from acts of Gods, including but not limited tofire, salt damage, earthquake, storm and flood.If a defect resulted from the use of abnormal power or defectiveconnecting devices.If consumable parts are to be replaced with new ones.If a defect resulted from any cause other than those not ascribed tothe product.If a defect resulted from any repair or modification done by anypersons other than authorized engineers at Hyun Won's agents orservice center.Description of Damages Action to be takenDuring the warranty periodReplacement or refund of the purchase priceReplacementRefund of thepurchase priceRepair at no chargeReplacementor refund of thepurchasepriceRefund of the amount of the product appraised on the basis of straight-line method of depreciation plus ten(10) percent.A defect or defects requiring important repair withinten(10) days from the date of purchase.A defect or defects requiring repair of anyimportant part or parts within one(1) monthfrom the date of purchase.A replaced product requiring important repair againwithin one(1) months from the date of purchase.in case that it is impossible to replace the product.In case that a defect occurredIn case that the same defect hasoccurred four times after beingrepaired.Repairablein case that it is impossible to repair the product.in case that it is impossible to repairthe product.because of no parts available for repair.in case that the company has lost the Productreturned for repair by the customer.Damages caused during shipment or installation of theproduct.in case that it is possible to repair the product.in case that it is impossible to repair the product.ReplacementRepair at chargeReplacement after receiving the payment of fees equal tothe amount thatare to becharged in case of repair at charge Repair at chargeRepair at charge Repair at chargeAfter the warranty Period expiresRepair at chargeLIABILITY FOR DAMAGES TO THE CUSTOMERS 30 WARRANTY FORM 31WARRANTY FORMProduct Name :Model Name:Date of Purchase: (date) (month) (year)Customer’s Name: Phone :Address :Agent’s Name: Phone :Address :This Warranty Form with the date of purchase must be presented forwarranty service. Please keep this warranty form well.1. This product shall be entitled to warranty service as specified in the warrantyform.2. As the warranty period begins on the date of purchase, please ask the agent toenter the date of purchase in the warranty form when you purchased theproduct.(In case that it is impossible to confirm the date of purchase, the warranty periodshall be considered to begin after six months from the date of manufacture.)3. This warranty form shall not be reissued.The specifications of the product are subject to changes without notice forthe purpose of quality improvement.One-year warranty
FCC RFINTERFERENCE STATEMENT33NOTE:This equipment has been tested and found to comply with the limits for a Class Bdigital device, pursuant to Part 15 of the FCC Rules. These limits are designed toprovide reasonable protection against harmful interference in a residential installation.This equipment generates, uses and can radiate radio frequency energy and, if notinstalled and used in accordance with the instructions, may cause harmful interferenceto radio communications. However, there is no guarantee that interference will notoccur in a particular installation.If this equipment does cause harmful interference to radio or television reception,which can be determined by turning the equipment off and on, the user is encouragedto try to correct the interference by one or more of the following measures.- Reorient or relocate the receiving antenna.- Increase the separation between the equipment and receiver.- Connect the equipment into an outlet on a circuit different from that to which thereceiver is connected. - Consult the dealer or an experienced radio, TV technical for help.- Only shielded interface cable should be used.Finally, any changes or modifications to the equipment by the user not expresslyapproved by the grantee or manufacturer could void the users authority to operatesuch equipment.THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES. OPERATION ISSUBJECT TO THE FOLLOWING TWO CONDITIONS: (1) THIS DEVICE MAY NOTCAUSE HARMFUL INTERFERENCE, AND (2) THIS DEVICE MUST ACCEPT ANYINTERFERENCE RECEIVED INCLUDING INTERFERENCE THAT MAY CAUSEUNDESIRED OPERATION.MANUFACTURER INFORMATION 32Ifyou need more information or have anyquestions, please feel free to contact us at:Hyun Won Inc.’s Customer Service CenterPhone: 82-54-338-6000Fax: 82-54-337-3075Homepage: http://www.m-any.come-mail : many@hyunwoninc.com333-1 Shindae-Ri, Kumho-Eup, Youngcheon-City, KyoungBuk770-803, South Korea

Navigation menu