Hyun Won DPD100 External Data Drive User Manual Data Driver eng 02 07 01

1 2

What's Data Driver?

Accessories

Hardware

Specifications and System requirements

Install program

Connect USB cable to USB Port

DataPlay Disk Insertion

How to use DataPlay Console

Recording files on DataPlay Disk

Eject DataPlay Disk

DataPlay Disk properties

About Data Driver Power

FCC RF INTERFERENCE STATEMENT

MEMO

2

3

4

5

6

12

13

14

15

21

23

24

25

26

Data Driver DPD-100 is a potable drive using DataPlay Engine and

USB port. With Using DataPlay Media Data Driver DPD-100 stores

upto 500Mb of Data, High Speed Data transfer with using USB cable,

Li-Ion Rechargeable battery enables you easy to Use.

43

Data Driver DPD-100 contents are as below.

DataPlay Disk Owner s Manual Software CD

USB Cable DC Charger Carrying Case

Each Part name of Data Driver DPD-100 is as below

USB Port

Eject Button

DC charger Port

PLAY LED

Low Battery LED

DataPlay Disk insert

Battery Cover

65

Slim Potable Driver using DataPlay engine

Size : 84mm 68mm 21.5mm

Weight (W/O Battery) : 97g

Memory : DataPlay Disk 500MB

Power : Li-Ion 3.7V

Battery life : 20 hours

PC Interface : USB Port

USB transfer rate : 3~4Mbps

System Requirement

Microsoft OS(Windows 98SE, ME, 2000, XP)

CD-ROM Drive

Over Pentium 200MHz CPU

RAM 32MB (64Mb for windows ME or 2000)

250MB of spare hard disk

USB Port

Specifications

System Requirement

To connect Data Driver DPD-100 to PC and copy files, please install S/W

as following.

1When Program CD is inserted screen below is show up. In case auto run is not

working open CD-Rom drive and run Setup.exe

Click

87

2Click "Press Me to Install" then program will be installed as below

1. DataPlay Base Components

2. Install Device Drivers

3. DataPlay File System

4. Java Runtime Environment

Click

3Install DataPlay Base Components

Finish

109

Install Device Driver contents are not shown up as graphic

4Install DataPlay File System

Click

Yes

Finish

1211

5Install Java Runtime Environment

Yes

1 Connect the cable to USB port of your PC.

2Connect the cable to USB port of Data Driver DPD-100.

To store data to DataPlay media Data Driver DPD-100 has to be connected with

PC by USB Cable

(If your PC doesn't have USB Port, Please purchase one near store.)

USB

USB means Universal Serial Bus connecting a device(hardware) to a PC.

Caution !

1. Do not use any USB cable except supplied one.

2. Place of the USB port of a PC maybe different based on PC brand.

PC USB Port Data Driver DPD-100

USB Port

1413

In order to write & store data on a Disk, users need to insert DataPlay Disk first.

Memory size of a DataPlay Disk is total

500MB(250MB on each side)

It's possible to write upto 250MB on each

side and delete the data. However, the

deleted space will not be recovered.

DataPlay Disk Insertion

REC Button Eject Button

DataPlay Console close button

DataPlay Console

1REC button : Write and storage data on DataPlay Disk

2Eject button : Eject the DataPlay Disk

3DataPlay Console close button : Close DataPlay Console

1615

Data Driver DPD-100 is a storage device with USB port and cable upto 500MB.

Here's how to record and storage data on DataPlay Disk.

First, Data Driver DPD-100 and PC should be connected with the supplied USB

cable and a DataPlay Disk should be inserted in Data Driver DPD-100

1Select file(s) to be recorded in Windows Explorer or My Computer.

2After selecting the file(s), click the right button of mouse and select "Copy".

Note : You can move the file(s) by Drag & Drop.

1817

3After copying the file(s), select "DataPlay drive(D: , F: , G: , ...) Then, click the

right button of mouse and select "Paste".

Note : Drive name of Data Driver DPD-100 will be subordinate drive to CD

Rom drive.

4You can see the selected file(s) were moved to the targeted drive(folder).

Note :

1. Do not disconnect the cable while recording the file(s).

2. It is not completed to record the selected and moved file(s).

2019

1) After moving(paste) the file(s), activate DataPlay Console by clicking the icon on

the screen bottom if it's not shown. Then click the "REC" button. The file(s) will be

transferred and saved on the DataPlay Disk with "PLAY LED" lamp. The lamp will

be turn off when copying is completed.

2) If you want to write another file on your PC to DataPlay Disk, follow the process

again.

One-side is 250MB. So, you need to record data not bigger than 250MB. You can use the other side.

Record with DataPlay Console

Click

1) After moving(paste) the file(s), select DataPlay drive and click the right button of

mouse. Then, click "Write Media". The file(s) will be transferred and saved on the

DataPlay Disk with "PLAY LED" lamp. The lamp will be turn off when copying is

completed.

2) If you want to write another file on your PC to DataPlay Disk, follow the process

again.

Record with Windows Explorer

5 There are two ways to record the file(s). One is with DataPlay Console which was

installed and run automatically when the device was connected. The other is with

Windows Explorer.

2221

There are two ways to eject DataPlay Disk. One is with DataPlay Console which

was installed and run automatically when the device was connected. The other is

with Windows Explorer.

Click the "EJECT" button. Then, DataPlay Disk

will be ejected.

Note:

If you eject DataPlay Disk without completing the process of record file(s), DataPlay

Disk will be ejected after recording file(s) automatically.

Eject DataPlay Disk with DataPlay Console

Click

Eject DataPlay Disk with Windows Explorer

As the above captured picture, select DataPlay drive and click the right

button of mouse and click "Eject". Then, DataPlay Disk will be ejected.

2423

DataPlay Disk is to be used for only DataPlay Engine enabled products.

Properties of DataPlay Disk

- You can purchase DataPlay Disk optionally.

- Total 500MB. 250MB on each side

- File(s) can be deleted. However, cannot use the deleted

space anymore.

Intentionally Eject DataPlay Disk

You can eject DataPlay Disk by force when it does not

work to eject by program in PC.

As per the picture, press the eject button on back part

of the Data Driver DPD-100. Then DataPlay Disk will

be ejected.

However, please make sure the USB cable should be

connected and if the battery is out, DC charging cable

should be connected as well.

Note :

The selected and moved file(s) on DataPlay Disk will not be recorded by intentional ejection and it

may cause wrong operation in Data Driver DPD-100.

Power Supply of Data Driver DPD-100

Power is supplied by rechargeable Li-Ion 3.7V battery internally placed.

Using DC charger, you can recharge the battery easily.

If the battery is running out, Low Battery LED lamp will be turn on.

Please recharge the internal battery by connecting the

supplied DC charger.

2625

NOTE :

This equipment has been tested and found to comply with the limits for a Class B

digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to

provide reasonable protection against harmful interference in a residential installation.

This equipment generates, uses and can radiate radio frequency energy and, if not

installed and used in accordance with the instructions, may cause harmful interference

to radio communications. However, there is no guarantee that interference will not

occur in a particular installation.

If this equipment does cause harmful interference to radio or television reception

which can be determined by turning the equipment off and on, the user is encouraged

to try to correct the interference by one or more of the following measures.

- Reorient or relocate the receiving antenna.

- Increase the separation between the equipment and receiver.

- Connect the equipment into an outlet on a circuit different from that to which the

receiver is connected.

- Consult the dealer or an experienced radio, TV technical for help.

- Only shielded interface cable should be used.

Finally, any changes or modifications to the equipment by the user not expressly

approved by the grantee or manufacturer could void the users authority to operate such

equipment.

THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES. OPERATION IS

SUBJECT TO THE FOLLOWING TWO CONDITIONS: (1) THIS DEVICE MAY NOT

CAUSE HARMFUL INTERFERENCE, AND (2) THIS DEVICE MUST ACCEPT ANY

INTERFERENCE RECEIVED INCLUDING INTERFERENCE THAT MAY CAUSE

UNDESIRED OPERATION.

2827

Phone

: 82-54-338-6000

Facsimile

: 82-54-337-3075

Homepage

: http://www.m-any.com

e-mail: hwihome@chollian.net

333-1 Shindae-Ri, Kumho-Eup, Youngcheon-City, KyoungBuk 770-803,

South Korea

S/N : D01010710122

Hyun Won DPD100 External Data Drive User Manual Data Driver eng 02 07 01

Hyun Won Inc. External Data Drive Data Driver eng 02 07 01

User Manual

Navigation menu

Namespaces

Views

Navigation