Hyundai Electronics Co HWP-220 PCS CDMA WLL Phone User Manual

Hyundai Electronics Industries Co Ltd PCS CDMA WLL Phone Users Manual

Users Manual

Download: Hyundai Electronics Co HWP-220 PCS CDMA WLL Phone User Manual
Mirror Download [FCC.gov]Hyundai Electronics Co HWP-220 PCS CDMA WLL Phone User Manual
Document ID108655
Application ID4KDMQtnY9Hd0440XSr0A1w==
Document DescriptionUsers Manual
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize659.81kB (8247633 bits)
Date Submitted2000-07-10 00:00:00
Date Available2000-09-01 00:00:00
Creation Date2000-06-28 17:17:14
Producing SoftwareAcrobat 3.0 Scan Plug-in
Document Lastmod2000-06-28 17:17:38
Document TitleUsers Manual
Document CreatorAcrobat 3.0 Scan Plug-in

Hyundai Electronics
.fl Industries Co., Ltd.
Wireless local Loop
Fixed Wireless Terminal
User’s Manual
(Hm-1295‘s: Hwnr—zzo)
Hyundai Electronics Industries C0., Ltd
Hyundai Electronics
0“ Industries Co., Ltd.
Contents
1. INTRRODUCTION
1.1 Notices for Using
1.2 Checking the Package
13 Name and Function of Each Part
1.4 Installing WLL Terminal (Installing Antenna)
1.5 LCD Display .....................
151 Display for Power On
1.5.2 Display for Call Attempt ..
1.5.3 Display for Incoming Call
1.5.4 Display for Battery Capacity (when the failure of ma power supply occurs)
1.5.3 Display for Weak RSSI(Received Signal Strength Indicator) ...................................... 16
2. Using Basic Functions ..................................................................................................................... 17
2.1 To Make a Phone Call
2.1.1 In on-hook state, ..
2.1.2 In off-hock state
2.2 To Receive an Incoming Call
2.2.1 In on- -hook state, .....
2 2. 2 In off- hook state ......
2. 3 To Last Number Redial (Redial Funet n) ................................ 18
3. Using Memory Functions ................................................................................................................. 19
3.1 To Store Telephone Numbers
32 To Make a Phone Call to the Stored Telephone Number
3.2.1 Speed Dial
3.2.2 Emergency Dial
3.2.3 Hot Line Dial.
3.3 To Search the Stored Telephone Number
3.3.1 Calling by Memory Address ......
3.3.2 To Retrieve by Name or Telephone Number.
3.3.3 List of Recent Calls .................................
3.3.4 To Edit the Stored Telephone Number
3.3.5 To Erase the Stored Telephone Number .
4. Using Menu Mode .........................................................................................
4.1 NAM ................
4.1.1 NAM Selection.
4.1.2 Self Phone Number Check Function
4.2 Calls.
4.2.1 Auto Retry Function (Auto Retry)
4 2. 2 Ring Type Function. ..
4.2.3 Key Beep Length Adjust Function (Key Beep).
Hyundai Electronics
. Industries Co., Ltd.
4.2.4 Speed Dialing Function (Speed Dial) ........................................................................... 35
425 Emergency Call Hold Functi0n(Emergency) ,35
4.2.6 Hot Line Function (Hot Line) .................. ,36
427 Data Receive Mode .37
4.3 To Adjust Volume ........ .39
4.3.1 To adjust the handset volume,. .39
4.3.2 To adjust the ringer volume, . 40
43.3 To adjust the key beep volume, .40
44 Display Version (VERSION) .40
45 Time Information ............. .4I
4.51 Last Call Time Check Function (LAST CALL).. .4]
4.52 Total Call Time Check Function (ALL CALLS). 4I
45.3 Clear All Calls Function (CLR ALL CALLS). 42
4.6 Alarm Reminder Function (Alarm Reminder)“ 42
47 SECURITY ....................................... A3
4,7.I Ocugoing Call Restrict Function (RESTRICT. OUTGOING). 43
47.2 Lock NOA SET Function (SET LOCK#} 43
4.7.3 Dial List Clear Function (CLEAR DlALS)..i 44
4.7.4 Memory Clear Function (CLEAR MEMORY) 45
4.7.5 Reset Default Function (RESET). 45
4.7.6 Voice Privacy ....................
4.8 Setup ...........
4.8.1 Data Rate.
4.8.2 Dial Frequencyi
4.8.3 Dial Time Control
4.8.4 Vocoder Select...
48.5 Aikey input ...................................................................................... 49
SHOW TO USE TERMINATED SMS .........................................................
5.1 Receive Voice Maili
5.2 Receive Text Mail...
53 SMS MENU ............................................................................................. 52

l.Tr0ubleShooting
2. FWT Technical Specification ................................................................
Hyundai Electronics
. Industries Co., Ltd.
1. Introduction
This product is a WLL(Wireless Local Loop) terminal designed to be used with CDMA(Code
Division Multiple Access) in order to sufficiently meet users' requirements for communication
services. Before using this product, please read this chapter first.
HWP—120/220 Main Feature
-. IS—95B support
Data rate : 64kbps(max)
Backward compatibility
New Soft Handcff Algorithm
Enhanced Hard Handoff
True IMSI
4 18-707 Data Capability
PC Fax Receiving
Modem Termination
, Speed dial
. Emergency call hold
. Hot Line
-. Alarm Reminder
, Battery backup
. Line Signal tone
Dial Tone
Warning Tone
Howler Tone
. Security
. 0TASP(Over-the-Air-Service Provisioning)
. SMS(Short Message Service)
VMS(Voice Message Service)
Page service
Message service
i Vocoder Select
8K QCELP
EVRC
13K QCELP
, Call Waiting *
-, Call Forwarding*
-i Call Transfer *
-. Three-way Calling‘
" : System dependant
Hyundai Electronics
0“ Industries Co., Ltd.
1.1 Notices for Using
. Do not disassemble or remodel WLL terminal at your own discretion,
- Do not hold the antenna or contact with it during a call.
' Avoid hot and moist places, Be careful not to wet the terminal or to spill any liquid on it,
because it may cause a case impossible to repair
- Avoid vibration or impact, and store the terminal in a place free of damage.
' Do not use it under an explosive environment or in a place where combustible liquid is used,
- Do not wipe the WLL terminal with a chemical solution like solvent or thinnerl
' Switch off the WLL terminal and remove the SMPS and when you do not use the terminal for
long,
- The backup battery should be used after being charged for long enough like more than 30 hours
as it can be discharged
The backup battery can be used only when the power is on,
1.2 Checking the Package
Thank you for buying this product. Please check whether the product package contains the
following items:
* WLL Phone
Hyundai Electronics
. Industries Co., Ltd‘
* Accessary
- Power Supply Unit(SMPS) ~ - Wall Bracket Kit -
User’s Manual ~ - Screw -
Hyundai Electronics
. Industries Co., Ltd.
* Optional Accessary
- External Antena & Fastener - - External Antena Cable -
- Installation Sheet - - External Battery -
Hyundai Electronics
. Industries Co., Ltd.
1.3 Name and Function of Each Part
Hyundai Electronics
Q“ Industries Co., Ltd.
0 CALL LED
Indicates the ring incoming state. Call LED indicates that an incoming call is present. This
one flashes during incoming bell rings.
. POWER LED
lndicates the main power supply state. POWER LED indicates the status ofextemally supplied
power, This LED keeps steady “ON” status while external power supplied. When the terminal
operates on internal back—up battery, the LED keeps steady “OFF”.
. LCD Screen
Displays every sort of information (in 2 lines of 16 characters),
Specific description regarding user information will be provided in feature description in detail,
. Hook Switch
A switch to turn on/off a call, which initiates and completes the operation of WLL terminal
0 DC Jack
A part through which the power is supplied from SMPS for WLL terminal.
. Serial Port
A port through which new soflware loading or connection of Diagnostic Modem(DM) is
possible.
. Power Switch
Turns on/offthe power supply to WLL terminal
. Functions of Buttons
DIAL Buttons: Used to input telephone numbers or characters(0-9, *, #). and to choose menu
items
[UH/[DOWN] Button : Used to retrieve stored telephone numbers. to adjust key beep volume,
to adjust ringer volume while the phone is ringing, to move to menu item
and to adjust handset volume during a call.
[MENU] Button : Used to choose a function menu.
[STORE] Button : Used to store the set value, and to check names and telephone number at the
time of retrieving telephone numbers.
[RECALL] Button : Used to retrieve stored telephone numbers.
[CLEAR] Button : Used to edit the typed number, or to move to a previous mode at the time of
specifying a mode,
[SEND/REDIAL] Button : Used to attempt a call in off-hook state, or to make a call to the
telephone number dialed last.
Hyundai Electronics
0“ Industries Co., Ltd.
1.4 Installing WLL Terminal (INSTALLING ANTENNA)
(General Installation)
1) Connect DC jack as shown below.
2) Connect the plug to an outlet and to SMPS for WLL terminal
10
Hyundai Electronics
. Industries Co., Ltd.
3) Tum on the power switch as following, and then the WLL terminal is initialized with power—on
beep sound,
4) After initialization, it enters into standby state.
5) In standby state, adjust the antenna location until the largest RSSI value is displayed on LCD
screen,
if Note : RSSI(Received Signal Strength Indicator) refers to a parameter which indicates the
strength of received radio frequency. The larger the value is, the better the speech quality is.
(I is the minimum value, and 5 is the maximum)
HYUNDAI HWP-IZO RSSI : 5 RSSI I 5
1 1:00am
Power-on (Initial State) Standby State(On-hook) Standby State (Off-hook)
I]
Hyundai Electronics
. Industries Co., Ltd.
(Installing Wall Bracket)
1) In case of concrete wall make holes with drill on Installation Sheet with the appropriate wall
posion on whioh the Installation Sheet would be attached.
Installation Sheet
0 In case of wooden wall, omit making holes and tighten up the screws directly on the
Installation Sheet,
[2
Hyundai Electronics
. Industries Co., Ltd.
The distance (2,0mm) between the head of the screw and the wall is the same as above second
figure
3) Insert the parts Al,A2 ofthe Wall Bracket into the body and push the parts B1, BZ with fingers
A 1 A2
Bottom of Phone
Wall Bracket
4) Insert the fixed screws into the holes C1, C2 and pull the body downward. At that time the
distance (2.0mm) between the head of the screw and the wall should be kept up surely not to be
one-sideed or not to swing
mmg M/
s“... to fix an 1”ka
m m
m- mum
e Note : If you want a clearer speech quality, you can install and use an external panel antenna
(For inquiry about the panel antenna, contact the agency where you bought the product.)
13
Hyundai Electronics
0“ Industries Co., Ltd.
3 Note : WLL terminal is equipped with a backup battery which allows terminal operation
without external power supply.
If the the commercial power, which is used as input to power supply unit(SMPS) for
WLL terminal fails, the WLL terminal operates with this backup battery for about 70
hours in standby state and 2 hours in call state
RSS115 BATT : 5 RSS] : 5 BATT: l
l0:00am 10:00am
Standby State in Battery Power Supply Standby State in Low Battery State
(Number 1 is blinking in BATT,)
‘BATT'(Battery) indicates the current capacity of the battery. (1 is the minimum value,
and 5 is the maximum.)
( Instnlling optional external Antenna )
l) Separate antenna from phone
14
Hyundai Electronics
0“ Industries Co., Ltd.
2) Connect external antenna cable 10 the same place as shown below,
3) Connect opposite of the cable to panel antenna as discribed below
15
Hyundai Electronics
0.“ Industries Co., Ltd.
1.5 LCD Display
(LCD displays the status of Phone type terminal for RSSI(Received Signal Strength Indicator),
Battery state and telephone number in 2 line by 16 column)
1.5.1 Display for Power On
HYUNDAI HWP-IZO RSS
or
On Power-on Standby State(On-hook) Standby State (Off-hook)
1.5.2 Display for Call Attempt
RSSI : 5 00:01
1234567890
In Dialing Before Call Setup After Call Setup
1.5.3 Display for Incoming Call
1.5.3.1 Incoming Call From Land
RSSI : 5 00:01
Incoming Call...
In Ringing Off Hook Call Completion
1.5.3.2 Incoming Call From Mobile
(If the call is coming from mobile then originator phone number will be displayed (It is displayed only
if infrastructure support caller ID))
1234567890 RSSI : 5 00:0] RSSI : 5
. ——> __>
Incoming Call... I 1:05am
In Ringing Off Hook Call Completion
1.5.4 Display for Battery Capacity (when the failure of main power supply occurs)
RSSI : 5 BATT : 5 RSSI : 5 BATT: I
10:00am 10:00am
Standby State Standby State for Low Battery (Number 1 is blinking in BATT.)
1.5.5 Display for Weak RSSI(Received Signal Strength Indicator)
RSSI : l RSSI : 0
10:00am No Service
Standby Stale (Number 1 is blinking in RSSI) Service is not available,
IS
Hyundai Electronics
Q Industries Co., Ltd.
2. Using Basie Functions
2.1 To Make a Phone Call
2.1.1 In on-hook state
' Press [RECALL] Button to search the desired telephone number and hook off the handset to
make a phone call.
- Press the telephone number in on-hook state and then hook offthe handset to make a phone call.
(But, in on-hook state, [SEND/REDIAL] Button is not recognized.)
' Speak over the telephone.
- Hook on the handset to finish the call,
2.1.2 In off-hook state
- Hook off the handset and dial tone is supplied. (In No Service state, however, warning tone is
supplied at the interval of 0.5 second.)
- In No Service state, no call can be allowed.
- Hold the handset and press [SEND/REDIAL] Button before pressing any other button, and a
call is made to the number that was dialed lastly.
- Press the telephone number and press [SEND/REDIAL] Button and a call is made,
- If [SEND/REDIAL] Button is not pressed afier dialing telephone number, the call is made
automatically afier 6 seconds later,
' Speak over the telephone,
- Hook on the handset to finish the call.
“S‘ Note : You can adjust the handset volume using [UH/[DOWN] Button during a call.
S‘ Note : In off-hook state, all Buttons except [MENU] Button are available.
LCD Dismy for Standby State LCD Displa before a call is connected
RSSI : 5 RSSI : 5 J Calling..,
10:14am 0336396980
(On-hook State) (Off-hook State)
RSSI : 5 00:01
0336396980
LCD Display for Dialing LCD Display after a call is connected
if Note : If you make a phone call in Outgoing Lock state, the following message is displayed on
LCD screen and the LCD enters into standby statei
l7
Hyundai Electronics
. Industries Co., Ltd.
2.2 To Receive an Incoming Call
2.2.1 In on-hook state
- Telephone rings with CALL LED blinking
(If the ringer is set as SILENT, the LED blinks and “Ringer off is displayed on LCD).
- Hook offthe handset.
- Speak over the telephone.
' Hook on the handset to finish the call.
2.2.2 In off—hook state
- If telephone rings before you press [SEND/REDIAL] Button during dialing, the ringer works
and the LCD screen displays an “incoming call. .,”.
- Press [SEND/REDIAL] Button to speak over the telephone.
- Speak over the telephone.
- Hook on the handset to finish the call.
LCD Display when LCD Display afier LCD Display for
tele hone rin s a call is connected Standb State
RSSI : 5 00:0] RSS] : 5
Incomin call...
Hook off the handset Hook on the handset.
in on-hook state.
Press [SEND/REDIAL] Button in off-hook state.
“of“ Note
1) If the ringer works during [MENU] or [RECALL] operation in on-hook state, the ringer
operation has priority over the others.
2) If the ringer works in off-hook state, you can speak over the telephone by pressing
[SEND/REDIAL] Button.
3) During a call, you can adjust the handset volume using [UH/[DOWN] Button.
2.3 To Last Number Redial (Redial Function )
- Redial function is used to make a phone call to the telephone number dialed last.
I) Hook off the handset and press [SEND/REDIAL] Button.
2) When a call is connected to the opposite party, you can speak over the telephone,
3) When the call is finished, hook on the handset.
18
Hyundai Electronics
0“ Industries Co., Ltd.
3. Using Memory Functions
3.1 To Store Telephone Numbers
- You can store up to 99 telephone numbers which you frequently use to 2-digit
addresses(01~99).
The stored telephone numbers allow you to make a phone call simply by calling those
addresses.
1) Press the telephone number you want to store and then press [STORE] Button in standby
state.
f‘ Note: To return to the initial state while inputting telephone number, press and hold
[CLEAR] Button, or click Hook Switch.
2) When '-' is displayed on the LCD screen, type the name with Dial Button and then press
[STORE] Button.
Cursor is blinking. —> -
0336396980
‘5‘ How to type a character (to type ‘H')
1) Select H by pressing Dial Button [GI-H4] on which characters GHl are marked.
Each time you press the Button, the display changes from G m H 4, I —> 4.
2) After selecting H, press [DOWN] Button to type next character. Or, the cursor moves
automatically to the next cell 2 seconds afier a character is selected.
’* How to modify characters
1) Clear character by character, by pressing [CLEAR] Button (Characters are cleared from
the one lastly typed).
2) Clear the entire characters, by pressing and holding [CLEAR] Button.
3) To move the cursor on the LCD screen, press [DOWN] Button to move to the right and
[UP] Button to move to the left.
4) Use Dial Button to continue typing other characters
‘5' Note : If you do not want to store the name, press [STORE] Button twice immediately after
typing the telephone numberl
'5' Note : To move to standby state in the middle of typing any character, press and hold
[CLEAR] Button twice, or click Hook Switch,
- To store the telephone number to the address displayed on the LCD screen (e.g, Address 01).
press [STORE] Button directly.
I9
Hyundai Electronics
OW Industries Co., Ltd.
LOCATION ??
auto = 01
' Ifyou want to store it to any other address, press the address by two digits (Ol~99). (egg l l)
LOCATION l 1
auto = 10
' If "OVERWRITE" is displayed on the LCD screen when you type the desired address, it means
that another telephone number is already stored to the address,
Overwrite 7 l l
1 YES 2 NO
0 If you want to clear the previous number and store the newly typed telephone number, press
Button [1].
- If you leave the previous number as it is, press Button [2] or [CLEAR] Button to return to the
previous step, store the telephone number to the other address, and then press [STORE] Button.
The LCD screen displays the following and the telephone number is stored.
NAME IO USED
STORED IN #0] 89 EMPTY
1“ Note : In Case All Memories are Used
If the LCD screen displays “No additional memory available", it is impossible to store any
additional telephone number because 99 memories are all used.
(You can store additional telephone numbers after clearing unnecessary telephone numbers.)
No additional
memo vailable
3.2 To Make A Phone Call To The Stored Telephone Number
3.2.1 Speed Dial
(User must set speed dial to enabled in order to use speed dial function. Refer to 4.5 to enable speed
dial)
1) 1 digit address
This function allows you to directly make a phone call to 9 telephone numbers stored in Addresses
01 through 09.
This function will be performed by selecting one offollowing 3 ways.
20
Hyundai Electronics
.‘” Industries Co., Ltd.
Hook off handset afier pressing ldigit among stored addresses(l~9).
Hook off handset and press ldigit among stored addresses(l~9) then press [SEND/REDIAL]
Button,
Hook off handset and press ldigit among stored addresses(1~9) for long,
The telephone number is displayed on the LCD screen and automatically dialed.
Speed dialing Calling...
Memo 1 l234567
2) 2digit address
This function allows you to directly make a phone call to the telephone numbers stored in
Addresses 10 through 99.
This function will be performed by selecting one of following 3 ways.
Hook off handset after pressing 2digit among stored addresses( l 0~99).
Hook off handset and press Zdigit among stored addresses(10~99) then press [SEND/REDIAL]
Button,
Hook off handset and press the first digit shortly time and successively press the second digit
for long time among stored addresses(10~99)
- As an example, in case of “16”address press [1] button shortly time and sussively press [6]
button for long time.
The telephone number is displayed on the LCD screen and the telephone number is
automatically dialed.
Speed dialing
Memo ll
Note : If no telephone number is stored in the specified address, "Empty Location" is displayed
on the LCD screen.
Emptv Location
21
Hyundai Electronics
04, Industries Co., Ltd.
3.2.2 Emergency Dial
0 This function allows you to directly make a call to emergency numbers ifthey’re stored in
addresses 01 //02 / 03 and ifemergency dial function enabled. Once the call originated, it
remains connected unless the received party hang up the phone. Look up the chapter 4.6 for
setting up this function.
- In OFF»HOOK state, you can make a call just by either holding the last digit ofthe address, or
pressing the two digits and [SEND/REDIAL] button shortly.
- In ON-HOOK state, just lifl up the handset(0ff~Hook) after pressing the address, and then call
will be connected.
Emergency Call Calling .
No. 1 1234567
if Note:
1) If you attempt speed dialing when emergency dial and speed dial functions are set at the same time,
Ol~03 addresses operate in the emergency dial mode.
2) And if you disable the emergency dial function in above state, the addresses 01~03 operate in the
speed dial mode,
3) If the emergency dial function is set on, the addresses Ol~03 operate in the emergency dial mode
normally even when the outgoing lock function is set on.
3.2.3HotLine Dial
With this Hotline function, you can make a call automatically to address 99 only with hooking—off action.
(Address 99 is supposed to be used for most frequently calling number)
Hotline function supports two mode of waiting time. If you set the hotline function as “Immediate”,
hooking-off action makes a call without any delay. But if you set the hotline function as “Timed”, call
will be connected afier automatic dial time passed(04~08 sec).
Hotline dialing Calling...
l234567
The default mode of hotline is “on” and the default value of automatic dial time is 6 sec.
Look up the chapter 4.7 for setting up this function.
3.3 To Search the Stored Telephone Number
If the stored telephone number is continued, that is, if you specify any telephone number, address
or name, retrieve the content registered at the corresponding memory, and confirm that the
specified telephone is stored in the designated address, you can make a phone call to the telephone
number.
22
Hyundai Electronics
0“ Industries Co., Ltd.
3.3.1 Calling by Memory Address
(Retrieval Method 1)
- Press [RECALL] Buttonr
- Following Recall Menu is displayed on the LCD screen.
[I] LOCATION
2 NAME 3 CALLS
3 Note : Press [UH/[DOWN] Button in Recall Menu state and you can see the contents stored in
the memory in due order. lfyou press [RECALL] Button and if there is no key—in for
the prescribed time (about 2 minutes), the LCD screen returns to standby state,
Press Button [l] to select Location and the LCD screen displays the following:
LOCATION 77
. Press any expected address(01~99) by two digits (e.g., press 0 I)
01 : ABC <— Stored address and name
0336396980 <— Stored telephone number
“if Note : If he selected address is empty, the LCD screen displays "Empty Location" and then
returns to Recall Menur
Emmy Location
“S Note : Press [CLEAR] Button in the above state where the telephone number is displayed, the
LCD screen returns to Recall Menu state.
' Press [UP /[DOWN] Button while the telephone number is displayed, and you can take a view
ofthe contents of memory in due sequence.
>0l : ABC
02 : ABD
Hook offthe handset to make a phone call to the telephone number you sought.
The telephone number displayed on the LCD screen is dialed.
23
Hyundai Electronics
00}! Industries Co., Ltd.
Call
0336396980
- LCD Display for Number Engaged
RSSI 1 05 00:01
(Retrieval Method 2)
' Press one digit or two digit number in the memory address (e.g,, press 01).
- Press [RECALL] Button.
01 : ABC
0336396980
95" Note : lfthe specified address is empty, "Empty Location" is displayed on the LCD screen.
Empg Location
- Press [UP /[DOWN] Button w1ile the telephone number is displayed, and you can take a View
of the contents of memory in due sequence.
>01 :ABC
02 : ABD
0 Hook offthe handset to make a phone call to the sought telephone number.
The telephone number displayed on the LCD screen is dialed.
Calling...
0336396980
- LCD Disp ay when the selected number is engaged
RSSI : 05 00:01
3.3.2 To Retrieve by Name or Telephone Number
(Retrieval by Name)
' Press [RECALL] Button.
24
Hyundai Electronics
0“ Industries Co., Ltd.
- Following Recall Menu is displayed on the LCD screen:
[1]LOCATION
2 NAME 3 CALLS
7 Note : Press [UH/[DOWN] Button in Recall Menu state and you can take a View of the
contents of memory in due sequence. lfyou press [RECALL] Button again or if there
is no key-in for the prescribed time (about 2 minutes), the LCD screen retums to standby
state.
' Press Button [2]
RECALL NAME'.7
Cursor is blinking. ——>
' Type more than one character of the expected name and press [STORE] Button (e.g., type AB).
>01:ABC
02:ABD
' Names including the typed characters (i.e., AB) are displayed in due sequence.
' Search the desired name using [UP]/[DOWN] Button.
OIZABC
>02:ABD
77 Note : Move to the desired location using [UH/[DOWN] Button and press [STORE] Button
on that location, and you can check the telephone number.
' Hook offthe handset to make a phone call to the telephone number you sought.
- The telephone number displayed on the LCD screen is dialed.
Calling...
0336396980
(Retrieval by Telephone Number)
Press a part of consecutive telephone number by more than 3 digits (e.g., O33XXXXXXX).
- Press [RECALL] Button
0 Telephone numbers or names starting with 033 are displayed on the LCD screen.
25
Hyundai Electronics
Q“ Industries Co., Ltd.
No numver
matches
lfthere are similar telephone lflhere is no telephone number.
numbers starting with 033. starting with 033
- You can search the next telephone number using [UP]/[DOWN] Button.
>01:ABC
09:0336398075
1“ Note : Move to the desired location using [UH/[DOWN] Button and press [STORE] Button
on that location, and you can check the telephone number
' Hook off the handset to make a phone call to the telephone number you sought.
- The telephone number displayed on the LCD screen is dialed,
3.3.3 List of Recent Calls
Up to 10 telephone numbers recently dialed are stored, and you can make a phone call using any
of these.
- Press [RECALL] Button,
Following Recall Menu is displayed on the LCD screen.
[ 1 ]LOCATION
2 NAME 3 CALLS
- Press Button [3].
>01:033639680
02:0336396970
- Stored telephone numbers are listed.
' Move the cursor marked with “>" to the desired telephone number in the list and hook off the
handset to make a phone call to that telephone number.
' The telephone number displayed on the LCD screen is dialed.
Calling...
0336396980
26
Hyundai Electronics
0“ Industries Co., Ltd.
note : Recent call list is maintained as long as terminal power(extemal or internal battery) is on
(Recent call list is cleared when terminal power (external or internal battery)is oft)
3.3.4 To Edit the Stored Telephone Number
33,4.1 To edit the stored telephone number when you select it directly with [l]LOCATION,
1) Press [MENU] Button and EDIT/ERASE Select No. is displayed.
Press [MENU] Button, 01 :ABC
1 EDIT 2 ERASE
2) Press Button [1]. (EDIT Mode is selected.)
0336396980
3) Telephone Number Edit Mode
Edit the telephone number by using [CLEAR] Button and Buttons [0] ~ [9] and then press
[STORE] Button.
“V Note - Press [CLEAR] Button to clear the telephone number from the
last digit,
0336308075 - Press and hold [CLEAR] Button (for more than 1 second) and
the entire number is cleared.
- Edit the telephone number using Dial Buttons [0] ~ [9],
- When you finish editing, press [STORE] Button.
4) Name Edit Mode
Edit the name by using [UH/[DOWN] Button and Buttons [0] ~ [9] and then press [STORE]
Button.
“3" Note - In the initial LCD screen for Name Edit Mode, the first
ABC character ofthe name is blinking.
0336308075 - Press [CLEAR] Button before Name Edit Mode and the LCD
screen returns to Telephone Number Edit Mode.
- Move the blinking cursor on to the location to be edited, using [UH/[DOWN] Button, and
edit the name using Buttons [0] ~ [9].
- To insert space in the middle of the name. press [CLEAR] Button on a character, or press
[DOWN] Button at the end of the name.
- When you finish editing the name, press [STORE] Button.
27
Hyundai Electronics
0“ Industries Co., Ltd.
- Store the edited telephone number in the same way as mentioned in “To Store the Telephone
Number”.
3.3.4.2 To edit the stored telephone number when you select it using [2] Name of[UP]/[DOWN] Button,
1) Move the cursor marked with ">" to the address to be edited using [UPJ/[DOWN] Buttoni
OI :ABC
>02:ABD
2) Press [STORE] Button to check the stored telephone number.
02:ABD
0336308075
3) Press [MENU] Button and the following is displayed.
02 :ABD
1 EDIT 2 ERASE
4) Press Button [1]. (EDIT Mode is selected.)
0336308075
5) Telephone Number Edit Mode
Edit the telephone number using [CLEAR] Button and Buttons [0] ~ [9] and then press
[STORE] Button,
0336308752
”e Note
- Press [CLEAR] Button to clear the telephone number from the last digit.
- Press and hold [CLEAR] Button (for more than 1 second) and the entire number is cleared
- Edit the telephone number using Dial Buttons [0] ~ [9].
- When you finish editing, press [STORE] Button,
6) Name Edit Mode
Edit the name using [UP]/[DOWN] Button and Buttons [0] ~ [9] and then press [STORE]
Button.
ABC
0336308752
28
Hyundai Electronics
. Industries Co., Ltd.
5‘ Note
- In the initial LCD screen for Name Edit Mode, the first character ofthe name is blinkingl
- Press [CLEAR] Button before Name Edit Mode and the LCD screen returns to Telephone
Number Edit Mode.
- Move the blinking cursor to the location to be edited, using [UH/[DOWN] Button, and edit
the name using Buttons [0] ~ [9].
- To insert space in the middle of the name, press [CLEAR] Button on a character, or press
[DOWN] Button at the end ofthe name.
» When you finish editing the name, press [STORE] Button.
- Store the edited telephone number in the same way as mentioned in "To Store the Telephone
Number".
3.3.5 To Erase the Stored Telephone Number
3.3.5.1 To erase the telephone number when you select it directly with [l ]LOCAT[0N,
1) Press [MENU] Button and the following is displayed.
01 :ABC Press [MENU] Button. 01 :ABC
0336396980 —> 1 EDIT z ERASE
2) Press Button [2]. (ERASE Mode is selected.)
ERASE $10]?
1 YES 2 NO
- Press Button [1] and the telephone number on the designated location is cleared.
» Press Button [2], and the LCD screen moves to Step 1) and the selected telephone number is
displayed
3) Press Button [1].
Clear Memory ~ The telephone number on the designated location is cleared.
Waitin
3,352 To erase the telephone number when you select it with its name or [UH/[DOWN] Button,
1) Move the cursor marked with ">" to the address to be erased, using [UH/[DOWN] Button.
>OI :ABC
02:ABD
2) Press [STORE] Button to check the stored telephone number.
29
Hyundai Electronics
. Industries Co., Ltd,
01 :ABC
0336306980
3) Press [MENU] Button and selectable EDIT/ERASE No. is displayed.
01:ABC
1 EDIT 2 ERASE
4) Press Button [2]. (ERASE Mode is selected.)
ERASE #01? - Press Button [1] and the telephone number on the designated
1 YES 2 NO location is cleared
Clear Memory
W .
- Press Button [2], and the LCD screen moves to Step 1) and the selected telephone number is
displayed.
f Note : To check the stored telephone number.
- Telephone numbers can be stored to each address up to 32 digits, and names up to 16
characters.
- Press [RECALL] Button first, and press [l]LOCATlON or [2]NAME to select the telephone
number you want to check.
- When you check the telephone number by selecting [1]LOCATION, the con‘esponding address,
name and telephone number are displayed
But, if the telephone number is stored in excess of 16 digits, you can check it by pressing
[MENU] Button and selecting [1]EDIT.
' When you check the telephone number by selecting [2]NAME, only the corresponding address
and name are displayed.
At this time, you can check the telephone number by pressing [STORE] Button.
But, if the telephone number is stored in excess of 16 digits, you can check it by pressing
[MENU] Button and selecting [l]EDIT.
' if you only check the telephone number by selecting [1]EDIT, click Hook Switch or press
[SEND/REDIAL] Button to exit to standby state.
- When you want to check the name additionally, you can specify it up to 16 characters but can
check only 13 characters.
But, when you check the telephone number by selecting [l]EDIT and then press [STORE]
Button, the LCD screen changes to Name Edit Mode. Then, you can check up to 16
characters of the name.
lfyou exit the Edit Mode without editing, click Hook Switch or press [SEND/REDIAL] Button.
30
Hyundai Electronics
. Industries Co., Ltd.
4. Using Menu Mode
. Flow-Chart ofMenu Mode Operation
1. Set NAM 1 MM tilJiZ
2. CDMA Mll\(#) Z CDMA Phone Number
1. Auto Retry 1 0FF,5,10,ZO,30 Sec.
Zr Ring Type I 10 Type
3. Key Beep 1 Long, Short
2' Calls 4. Speed-Dial : Disable/Enable
5. Emergency Z Disable/Enable
6. Holline 2 Off/lmediate/Timed
7. Data Rcv Mode 2 5 Type mode
3? Volume 1. Earpiece : 5 Level
2. Ringer : 6 Level
3. Key Tone 2 6 Level
4. Display
1.l"ersiontDisplays the s/w version
1.Lasl CallIDisplays the time when
the last call was made.
2.Al] CallsIDisplays the total
number of calls,andtotalcall
duration.
3. Clr All Calls: Clears all Calls.
7. Security
6.Alarm Reminder
1A Alarm Reminder 2 Active the
alarm ring when the registered
UmLaLLthS.
1. Rest..0utgoing 2 Allow, Restric
2. Set Lock# 1 Changes password.
3. Clear Dials 2 Clears recent dial
records,
4, Clear Memory : Clears numbers
stored in memory.
5. Reset Default:
Speed Dial —) OK
Emergency —) OFF
Holline Call —> OFF
Alarm Reminder 9 OFF
Rest. Outgoing —> OFF
Ear Piece —) OFF
6.voice privacy 3 OMOFF
I Dam llato : Hate Sell Rate.
z. Uinl qunonryzdual A .
“HilloflL‘ Control 3
l. locutler select: 8k,
5. Lliey input
k, EVRC
31
Hyundai Electronics
. Industries Co., Ltd
4.1 NAM
4.1 .l NAM Selection
(This function allows that the user who subscribes to 2 or more systems can select any one from the
telephone number list he subscribes to.)
- Press [MENU] Button. Then, the LCD screen displays the following:
' Press Button [1]
- Press Button [1]
1 : NAM l
2 : Calls
to choose NAM ltem.
1 : Set NAM l
2 : CDMA MIN( # 2
-> SETNAM it]
Then, the LCD screen displays the following:
to choose SET NAM ltem. Then, the LCD screen displays the following:
' Search on item to select using [UH/[DOWN] Button, and press [STORE] Button to store the item.
4.1.2 Self Phone Number Check Function
(This function allows the user to check telephone number ofthe WLL terminal being used)
- Press [MENU] Button. Then, the LCD screen displays the following:
- Press Button [1]
- Press Button [2]
l 2 NAM 1
2 : Calls
to choose NAM ltem.
1 : Set NAM l
21CDMA MIN( #)
CDMA PHONE #
3006004000
Then, the LCD screen displays the following:
to choose CDMA MIN( # ) Itemi Then, the LCD screen displays the following:
- lfyou press [MENU] Button or when about 10 seconds pass after you checked the content, the LCD
32
Hyundai Electronics
0“ lndustries Co., Ltd.
screen returns to standby state,
5 Note : Telephone number cfthe WLL terminal being used is displayed on the LCD screen.
4.2 CALLS
4.2.1 Auto Retry Function (AUTO RETRY)
(This function automatically retries a call at the interval of the time specified by the user, if the call is
not connected due to traffic congestion ofthe service system.)
' Press [MENU] Buttoni Then, the LCD screen displays the following:
1 : NAM l
2 : Calls
- Press Button [2] to choose CALLS Item. Then, the LCD screen displays the following:
1 : Auto Retry l
2 : Ring Type
' Press Button [1] to choose AUTO RETRY Item. Then, the LCD screen displays the following:
AUTO RETRY every
—' 5 seconds
- Search an item for selecting by using UP]/ [DOWN] Button, and press [STORE] Button to store the
item.
- Press [CLEAR] Button to return to the previous step and press [MENU] Button to return to standby
state.
”6“ Note : SET 5 SEC : Retries a call automatically after 5 seconds later if the call is not connected.
SET 10 SEC : Retries a call automatically after 10 seconds later if the call is not connected.
SET 20 SEC : Retries a call automatically after 20 seconds later ifthe call is not connected.
SET 30 SEC : Retries a call automatically after 30 seconds later if the call is not connected,
SET OFF : Does not retry a call even ifthe call is not connected.
4.2.2 Ring Type Function
You can select any offollowing 10 ring types to inform incoming calls,
1) Press the following buttons in tum in standby state : [MENU] Button --> Button [2] -—> Button
[2]-
2) Select a ring type using [UP]/[DOWN] Button, listening to the ring soundi Then, press
33
Hyundai Electronics
04: Industries Co., Ltd.
[STORE] Button to store the selected ring type.
3) Press [MENU] Button to return to standby state without store.
7 There are 10 types ofrings. (Ring Type 1 ~ Ring Type 10)
The initial value is “ Bell Type 1”
1: NAM i -—> 1: Auto Retry i RING TYPE
2: Calls 2: Rig Type _’ —> Bell 1
3: Volume I 3: Key Beep T RING TYPE
4: Display 4: §peed-Dial Bell 2
5: Time Info T (Display after Butter [2] is pressed ) J
6: AIarmReminder |
(Display after [MENU] RING TYPE
Button is pressed) Bell I0
(Display afier Button [3] is pressed)
4.2.3 Key Beep Length Adjust Function (KEY BEEP)
(This function allows you to change the duration ofdiai to keep beeping in WLL terminal.)
- Press [MENU] Button, Then, the LCD screen displays the following:
1 : NAM l
2 : Calls
- Press Button [2] to select CALLS Itemi Then, the LCD screen displays the following:
I zAuto Retry l
2 : Ring Type
3 : Key Beep T
4 : Speed —Dial
- Press Button [3] to select KEY BEEP Item, Then, the LCD screen displays the following:
KEY BEEP
fl Long
- Search an item for selection using [UH/[DOWN] Button, and press [STORE] Button to store the
item.
- lfyou do not want to select any item or want to return to standby state, press [MENU] Buttono
e" Note : SHORT : KEY TONE sound is transmitted for a short time.
LONG : KEY TONE sound is transmitted while the key is pressed.
34
Hyundai Electronics
. Industries Co., Ltd.
The initial value is “Short“.
4.2.4 Speed Dialing Function
(This function is used for turnning on/off the function to make a call to the stored telephone number
by Speed dial. For example, ifthe telephone number 0123456789 is stored in Address 2, you can make
a call by pressing Button [2] for 1 second or more in off-hook state.)
- Press [MENU] Button. Then, the LCD screen displays the following:
1 :NAM l
2 : Calls
' Press Button [2] to select CALLS Item. Then, the LCD screen displays the following:
1 :Auto Retry l
2 : Ring Type
3 : Key Beep T
4 : Speed-Dial
' Press Button [4] to select SPEED DIAL Item. Then, the LCD screen displays the following:
Speed Dial
—> Enable
' Search an item for selection by using [UP]/[DOWN] Button, and press [STORE] Button to store the
item.
- If you do not want to select any item or want to return to standby state, press [MENU] Button.
it Note : SPEED DIAL “ENABLE” 1 Speed dial function is used.
SPEED DIAL “DISABLE” : Speed dial function is not used.
The initial value is “Enable”.
4.2.5 Emergency Call Hold Function
(Emergency call hold function enables you to store up to three phone numbers(OlN03 addresses) in
preparation for urgent situations and to make calls fast with the abbreviated dialing. Calls remain
connected unless the called party hangs up the phone, and the initial state is set as off)
' Press [MENU] Button. Then, the LCD screen displays the following:
35
Hyundai Electronics
. Industries Co., Ltd.
- Press Button [2] to select CALLS ltem. Then, the LCD screen displays the following:
3 : Key Beep 1
4 : Speed-Dial
5 : Emergency T
6 : Hotline
- Press Button [5] to select EMERGERCY item. Then, the LCD screen displays the following:
EMERGENCY DAIL
—> Disable
- Search an item for selection by using [UH/[DOWN] Button, and press [STORE] Button to store the
item.
- If you do not want to select any item or want to return to standby state, press [MENU] Button.
17 Note : EMERGENCY DIAL “ENABLE” : Emegency call hold function is used.
EMERGENCY DIAL “DISABLE" : Emegency call hold function is not used.
70' Note : Ifa phone number is stored in 01~03 address and emergency call function is set(on).
you can make a call just by holding the last digit of the address, or press the two digits
hortly and then press the hook swich. Calls remain connected unless the received party
hangs up the phone.
If you attempt abbreviated dialing when emergency call hold and speed dial are set at the
same time(on), OI~03 address operate in the emergency call hold mode.
4.2.6 Hot Line Function
(With the hot line function, you cajn make a call automaticall without entering any phone number. In
other words, if you stored one frequently used number(99 address) in advance and hot line function is
0n(timed or immediate), a call will be connected to the registered number automatically by two methods.
For immediate hot line, you have only to pick up the phone and the call will be connected And for timed
hot line, you should pick up the phone and wait for a few seconds(4~8 secs), then the call will be
connected.)
' Press [MENU] Button. Then, the LCD screen displays the following:
lzNAM l
Hyundai Electronics
. Industries Co., Ltd.
' Press Button [2] to select CALLS Item. Then, the LCD screen displays the following:
3 : Key Beep l
4 : Speed-Dial
5 : Emergency T
6 : Hotline
- Press Button [6] to select EMERGERCY Item. Then, the LCD screen displays the following:
Hotline Dail
—> Off
- Search an item for selection by using [UH/[DOWN] Button, and press [STORE] Button to store the
item,
- If you do not want to select any item or want to retum to standby state, press [MENU] Button.
fr“ Note: HOT LINE DIAL “OFF” : Releasing hot line function (oft)
HOT LINE DIAL “IMMEDIATE” : Setup hot line function (immediate hot line on)
HOT LINE DIAL “TIMED” : Setup hot line function (timed hot line on)
4.2.7 Data Receive Mode
0 This service enables you to access the lntemet and PC communication and to receive/transmit the
fax message by connecting the PC to WLL terminal.
The wireless data communication service may not be available from a service provider. Please
check whether or not the service provider provides this service.
0 Purchase the data communication cable(RS-23Z cable) from the service provider for this service.
0 For more detailed information on computer environment setup and others, refer to data service
data service user’s manual.
4.2.7.1 Setup function for data service—receving mode
Method 1) Setup using the telephone
This function set up the receiving mode according to the data service type by using the telephone,
which is connected to the WLL terminal.
- Press [MENU] Button. Then, the LCD screen displays the following:
37
Hyundai Electronics
Cl” Industries Co., Ltd.
l ZNAM l
2 : Calls
' Press Button [2] to select CALLS Item. Then, the LCD screen displays the following:
5 : Emergency l
6 : Hotline
7 :Data Rcv mode 7
- Press Button [7] to select Data Rcv mode ltemi Then, the LCD screen displays the following:
Fax/Moden Mode
—> Off
- Search an item for selection by using [UH/[DOWN] Button, and press [STORE] Button to store the
item.
0 lfyou do not want to select any item or want to return to standby state, press [MENU] Button.
7“ Note : Fax/Modem Mode “OFF" : This will release the data service receiving mode.
Modem Mode “FOREVER” : This will set the PC fax receiving mode (It will operate in
the PC fax receiving mode for one time),
lften minutes elapsed after the setup, the fax receiving
mode is automatically releasedi
Modem Mode “ONCE” : This will set the PC fax receiving mode (It will operate in
the PC fax receiving mode until power off).
Fax Mode “FOREVER" : This will set the modem receiving mode (It will operate in
modem receiving mode for one time)
If ten minutes elapsed after the setup, the modem receiving
mode is automatically released.
Fax Mode “ONCE” : This will set the modem receiving mode.
(It will operate in modem receiving mode until power oft).
The initial value is Fax/Modem Mode “OFF” at power up
Method 2) Setup using AT command
This function set up the receiving mode according to the data service type by using the communication
emulator program oFPC which is connected to the WLL terminal.
38
Hyundai Electronics
. Industries Co., Ltd.
- Enter [AT+HDVAD=O] in the communication emulator program and then press Enter key.
After the setup is completed, OK is displayed. This will release the data service receiving mode. ‘
0 Enter [AT+HDVAD:l] in the communication emulator program and then press Enter key.
Afler the setup is completed, 0K is displayed. This will set the PC fax receiving mode, (It will
operated in the PC fax receiving mode only once.) If ten minutes elapsed after the setup, the fax
receiving mode is automatically released.
0 Enter [AT+HDVAD=2] in the communication emulator program and then press Enter key.
Afler the setup is completed, UK is displayed This will set the PC fax receiving mode. (It will
operate in the PC fax receiving mode until power off.)
- Enter [AT+HDVAD=3] in the communication emulator program and then press Enter key.
After the setup is completed, OK is displayed. This will set the modem receiving mode. (It will
operate in modem receiving mode only once.) If ten minutes elapsed alter the setup, the modem
receiving mode is automatically released.
G Enter [AT+HDVAD=4] in the communication emulator program and then press Enter key.
After the setup is completed, UK is displayed. This will set the modem receiving mode.
(It will operate in modem receiving mode to the power off)
0 Default is [AT+HDVAD=O],
4.3 To Adjust Volume
4.3.1 To adjust the handset Volume
You can adjust the receiver speech volume in two ways
Method 1) , Press the following buttons in turn in on-hook standby state : [MENU] Button 9
Button [3] —) Button [1],
. Set the volume using [UP]/[DOWN] Button and press [STORE] Button to store the
setting.
. Press [MENU] Button to return to standby state,
1: NAM l
2: Calls
3: Volume I 1: Earpiece l EARPIECE VOLUME
4: Display 2: Ringer -- DU DD DE DE! DD -—
5: Time Info T 3: Key Tone T (Display atter Button [1] is pressed)
6: AlarmReminder
Display after Butter [3] is pressed )
( Display after [MENU] Button is pressed)
Method 2) l Adjust die volume using [UH/[DOWN] Button during a call.
39
Hyundai Electronics
04: Industries Co., Ltd.
4.3.2 To adjust the ringer volume
You can adjust the ringer volume in two ways.
Method 1) . Press the following buttons in turn in on-hook standby state : [MENU] Button -->
Button [3] --> Button [2].
. Set the volume using [UH/[DOWN] Button and press [STORE] Button to store the
setting.
. Press [MENU] Button to return to standby state.
1: NAM t
2: Calls
3: Volume I l: Earpieee i RINGER VOLUME
4: Display 2: Ringer -- DE DE] DD DD DD --
5: Time Info T 3: Key Tone T (Display afier Button [2] is pressed)
6: AlarmReminder
( Display afier [MENU] Button Display afier Butter [3] is pressed)
is pressed)
( Display afier [MENU] Button is pressed)
Method 2) Adjust the volume using [UH/[DOWN] Button while the ringer works.
4.3.3 To adjust the key beep volume
Method I) . Press the following buttons in turn in on-hook standby state : [MENU] Button -->
Button [3] ~-> Button [3].
. Set the volume using [UH/[DOWN] Button and press [STORE] Button to store the
setting,
. Press [MENU] Button to retum to standby state.
I: NAM t l: Earpieee l KEYTONE VOLUME
2: Calls 21Ringzr -- DD DE DE DE DD --
3: Volume I i) 3: Key Tone T (Display afier Button [3] is pressed)
4: Di_sp|ay
5: Time Info T (Display afier Buttor [3] is pressed )
6: AIarmReminder
( Display after [MENU] Button is pressed)
Method 2) Adjust the volume using [UH/[DOWN] Button in on-hook standby state.
4.4 Display Version
(This function allows you to check software version ofthe WLL terminal being used.)
40
Hyundai Electronics
. Industries Co., Ltd.
- Press [MENU] Button.
- Press Button [4] to select DISPLAY Item.
' Press Button [1] to select VERSION Item. Then, the LCD screen displays the following:
VERSION
HWP» I20 00]
' If you press [MENU] or [STORE] Button, or when about IO seconds pass, after you checked the
sofiware version, the LCD screen returns to standby state.
4.5 Time Information
4.5.1 Last Call Time Check Function (LAST CALL)
(This function displays the duration time ofthe last call.)
' Press [MENU] Button.
~ Press Button [5] to select TIME INFO Item.
- Press Button [1] to select LAST CALL Item. Then, the LCD screen displays the following:
' After checking the last call, If you press [MENU] or [STORE] Button, or when it passed about 10
seconds, the LCD screen returns to standby state.
‘f‘ Reference: When the power is off, it become 00:00:00.
4.5.2 Total Call Time Check Function (ALL CALLS)
This function allows you to check the total call duration and total number ofoutgoing calls.)
' Press [MENU] Button.
' Press Button [5] to select TIME INFO Item.
- Press Button [2] to select ALL CALLS Item, Then, the LCD screen displays the following:
0 Calls
TIME 00
00
- Afier checking all calls, If you press [MENU] or [STORE] Button, or when it passed about [0
seconds , the LCD screen returns to standby state.
‘7‘ Note : ALL CALLS : Displays the total call duration and total number ofoutgoing calls.
The call duration and the number of calls for ALL CALLS are counted from the
last CLR ALL CALLS operation.
41
Hyundai Electronics
OH Industries Co., Ltd.
note : Recent call time is maintained as long as terminal power(extemal or internal battery) is on
(Recent call time is cleared when terminal power (external or internal battery)is oft)
4.5.3 Clear All Calls Function (CLR ALL CALLS)
(This function allows you to clear the total call duration and total number of outgoing calls, to start
counting anew.)
' Press [MENU] Buttonr
' Press Button [5] to select TIME INFO Item,
- Press Button [3] to select CLR ALL CALLS Itemr Then, the LCD screen displays the following:
Clear All Calls 7
1 YES 2 NO
- Press Button [1] to clear the total call duration and total number of calls, or press Button [2] not to
clear them.
4.6 ALARM REMINDER FUNCTION
(Alarm reminder function activates the alarm ring when the registered time arrives, and stops the
ring when you pick up the phone, The initial state is set to off.)
- Press [MENU] Button. Then, the LCD screen displays the following:
3 : Volume l
4 : Display
5 : Time Info T
6 : AlarmReminder
- Press Button [6] to select ALARM REMINDER Item. Then, the LCD screen displays the
following:
Time! Minute ?
00200
- Enter the desired time as 4 digits(24 hour system) and then Press [STORE] Button. Then, the LCD
screen displays the following:
Alarm mode
—> Off
0 Search an item for selection by using [UH/[DOWN] Button, and press [STORE] Button to store the
42
Hyundai Electronics
0 Industries Co., Ltd.
item.
- If you do not want to select any item or want to return to standby state, press [MENU] Button.
‘s‘ Note : ALARM MODE “OFF" : Releasing alarm reminder,
ALARM MODE “ALWAYS” : Setup alarm reminder(a|ways),
ALARM MODE “ONCE” : Setup alarm reminder(one time).
4.7 SECURITY
4.7.1 Outgoing Call Restrict Function (RESTRICT. OUTGOING)
(This function allows you to restrict or not to restrict outgoing calls.)
- Press [MENU] Button.
~ Press Button [7] to select SECURITY Iteml Then, the LCD screen displays the following:
ENTER LOCK CODE 7
- Enter 4 digits of LOCK CODE. Then, the LCD screen displays the following:
1 : Rest. Outgoing l
2 : Set Lock #
- Press Button [I] to select REST. OUTGOl'NG Item, Then the LCD screen displays the following:
Outgoing Call 7
fl Allow
- Choose Allow/Restrict for "Outgoing Calls?“ using [UP]/[DOWN] Button, and then store it using
[STORE] Button,
f'fi‘ Reference : The initial value ofLock Code is “0000 “.
4.7.2 Lock Number Setting Function (SET LOCK#)
(This function is used to change the password.)
- Press [MENU] Button.
- Press Button [7] to choose SECURITY Item. Then, the LCD screen displays the following:
43
Hyundai Electronics
0 Industries Co., Ltd.
- Enter 4 digits of
' Press Button [2]
ENTER LOCK CODE ‘?
LOCK CODE. Then
, the LCD screen displays the following:
l : Rest. Outgoing l
2 : Set Lock #
to select SET LOCK#
ENTER NEW CODE
Item, Then, the LCD screen displays the following:
- Enter a new LOCK CODE.
~ Press [STORE
following:
' Alter checking t
Button to store the
new LOCK CODE. Then, the LCD screen displays the
REENTER NEW CODE
1e LINE CODE, press
STORE] Button to exit.
7? Reference : The initial value is “Allow“.
4.7.3 Dial List Clear Function (CLEAR DIALS)
(This function is used for clearing the list of dials which have been made up to now.)
- Press [MENU] Button,
~ Press Button [7] to choose SECURITY Item. Then, the LCD screen displays the following:
- Enter 4 digits of
ENTER LOCK CODE ‘7
LOCK CODE.
1 : Rest, Outgoing l
2 : Set Lock #
3 : Clear Dials T
- Press Button [3]
4 : Clear Memory
CLEAR DIALS if 7
to select CLEAR DIALS Item. Then, the LCD screen displays the following:
Nu
44
Hyundai Electronics
0“ Industrles Co., Ltd.
' Select YES or NO using [UP]/[DOWN] Button, and store it using [STORE] Button.
f" Note : CLEAR DIALS YES : Clears the list ofdials.
CLEAR DIALS N0 : Does not clear the list ofdials.
4.7.4 Memory Clear Function (CLEAR MEMORY)
(This function is used for clearing the information stored in memory.)
- Press [MENU] Button.
- Press Button [7] to choose SECURITY Item. Then, the LCD screen displays the following:
ENTER LOCK CODE 7
' Enter4 digits ofLOCK CODE.
1 :Rest. Outgoing l
2 : Set Lock #
3 : Clear Dials T
4 : Clear Memog
- Press Button [4] to select CLEAR MEMORY Item. Then, the LCD screen displays the following:
CLEAR MEMORY ?
No
- Select YES or NO using [UH/[DOWN Button, and store it using [STORE] Button.
‘3’ Note : CLEAR MEMORY YES : Clears all the information stored in memory.
CLEAR MEMORY NO : Does not clear the information stored in memory.
4.7.5 Reset Default Function
(This function is for the terminal to be initialized. The current values will be returned to the original
Values as speed dial(on), emergency call hold(off), hot line call(off), alarm mode(offl, lock mode
(off), earpiece volume(3), It is not desirable that users operate reset menu frequently.)
Reset menus Default values
Speed dial on
Emergency/Jail hold ofi“
Hot line call off
Alarm off
Lock off
Earpiece volume Level 3
45
Hyundai Electronics
Industries Co., Ltd.
“H
- Press [MENU] Buttonl
- Press Button [7] to select SECURITY lteml Then, the LCD screen displays the following:
ENTER LOCK CODE “7
- Enter 4 digits of
- Press Button [5]
LOCK CODE. Then, the LCD screen displays the following:
5 : Reset Default T
to select RESET DEFAULT Item. Then the LCD screen displays the following:
RESET DEFAULT 7
No
' Select YES or NO using [UP]/[DOW'N] Button, and then store it using [STORE] Button.
4.7.6 Voice Privacy
(This function is Voice Privacy On/Off)
Press [MENU] Button,
' Press Button [7] to select SECURITY Item. Then, the LCD screen displays the following:
- Enter 4 digits of
- Press Button [6]
ENTER LOCK CODE 7
LOCK CODE. Then
6 : Voice Privay T
, the LCD screen displays the following:
to select VOICE PRIVACY Item. Then the LCD screen displays the following:
VOICE PRIVACY 7
No
4»
Select YES or NO using [UH/[DOWN] Button, and then store it using [STORE] Button.
46
Hyundai Electronics
. Industries Co., Ltd.
4.8 Setup
4.8.1 Data Rate
(This function is for setting the terminal for the default speed of data transmission. The terminal
supports 2 mode oftransmission. one is 8K(rate set ”and the other is 13K(rate set 2).
- Press [MENU] Button.
- Press But‘mn {8} to choose Set Up Item. Then. the LCD screen displays the tbllowing:
- Enter 4 digits ot‘MAINTENANCE CODE.
l 1 Data Rate ¢
2 : Dial Tone
3 : Dial Time T
4 : Vocotlerselect
- Press Button [1 ] to select DATA RATE Item. Then. the LCD screen displays the fo|lowing:
> Yes
. Select Rate Set | UT 2 using [UPJ/[DOWN] Burton, and store it using [STORE] Button,
4.8.2 Dial Frequency
(This function is used to select the dial tone . The dial tone which could be heard from handset has 4
types oftone. they’re 350+44O Hz dual. 400 Hz single, 425 Hz single and 450 Hz single tone.)
' Press [MENU] Button.
- Press Button [8] (0 chonse Set Up ltem. Then. the LCD screen displays the following:
OD]:
N1 r’th’l er f\?\
' Enter 4 digits at" VIAIN'I'ENANCE CODE.
47
Hyundai Electronics
. Industries Co., Ltd.
: Data Rate 1
1 Dial Tmle
: Dial Time
1 Vocoderselect
- Press Buflon [ZJ to select DIAL TONE Item. Them the LCD screen displays the following:
350 , 440“):
’ ‘ Yes
' Select Dial Tone that you want using [Um/[DOWN] Burton and store it using [STORE] Button
4.8.3 Dial Time Control
(This function is used when you want to adjust the automatic calling time, lfyou adjust the dial
time for 4 see, then the terminal will always try to make a call in 4 sec. aficr you press the last
calling number. it could be adjusted from 4 to 8 sec. and the default value is 6 sec")
- Press [MENU] Button.
- Press Button {8} to choose Set Up item, Then. the LCD screen displays the following:
\'l/\ll\’l'I-.N/\l\(',I-, COD]:
- Enter 4 digits ofMAINTENANCE CODE.
: Data Raw i
,’ Dial l'une
1 Dial Time
: Vocoderselect
hum—t
- Press Button {3} to select DIAL 'l l'vlli Item. Then, the LCD screen displays the following:
Diallimc (net
> \’c.\
- Select Dial Time that you want using [UP]/| DOWN] Button, and store it using [STORE] Button.
48
Hyundai Electronics
04! Industries Co., Ltd.
4.8.4 Voeoder Select
(You can speak by phone with 3 types of Vocoder and this function is used for setting the default
type oftheni. The types are 8K QCEIJ’, 13K QCELP and 8K EVRC.)
- Press [MENU] Button.
' Press Button [8] la choose Set Up Item. Then. the LCD screen displays the following:
MAINTENANCE CODE
- L-nter 4 digits ofMAIN'l'L-‘NANCE CODE.
1 Data Rate i
: Dial Tone
: Dial Time
4k‘wlo—
: Vocoderselect
- Press Button [4] to select Voeodei Select Item. Then, the LCD screen displays the following:
Vocoder St: feet
A 8K
- Select the Vocoder that you want using {UH/[DOWN] Button, and store it using [STORE] Button.
4.8.5 A_key Input
(This feature is for Authentication key value input I
I’ress [MENU] Button.
- Press Button {8} to select SETUP Item. Then, the [CD screen displays the following:
VIAIN’I'I ,N /\N(Il-l(',()l)l'
' Enter 4 digits ofMAIN‘I‘L’NANCE CODE. Then. the LCD screen displays the following:
5 :AAkey Input T
- Press Button 55] to select AAKey Item. Then the LCD screen displays the following:
49
“H
Hyundai Electronics
Industries Co., Ltd.
A Key Input
Input the A key, and then store it using [STORE] Bunon.
50
Hyundai Electronics
0 Industries Co., Ltd.
54 How to use Terminated SMS
5.1 Receive Voice Mail
® Notification of the received Voice Mail Message
When MS(Mobile Station) receives Voice Mail from MC(Message Center) or BS(Base Station),
VOICE MAIL
6/14 9:07am
5 New Messages
[QUIT]
Notify the received SMS is Voice Mail, reception time, and the number ofthe stored messages in MC
on the display screen
Display is scrolled with 2 seconds interval.
Call LED blinks until MS escape from Notification State,
(2) View the scrolled message
Scroll the display with [UP]/[DOWN] or [ * ], [ if ] keys,
® Escape from Notification State to Normal State
Press [STORE] or [CLEAR] key.
RSS
.6am
5.2 Receive Text Mail
® Notification of the received Text Mail Message (Page or Message Service)
When MS receives Text Mail SMS from MC(Message Center) or BS(Base Station),
PAGE!
6/14 9 : 32am
From 03366302730
[QUIT]
Notify the received SMS is Text Mail ( Page or Message ), reception time, call-back number, and
51
Hyundai Electronics
0“ Industries Co., Ltd.
messages on the display screen.
Display is scrolled with 2 seconds interval.
Call LED blinks until MS escape from Notification State.
® View the scrolled message
Scroll the display with [UP]/[DOWN] or [ * ], [ # ] keys.
6) Escape from Notification State to Normal State
Press [STORE] or [CLEAR] key.
RSSI:5
9:26am
5.3 SMS MENU
5.3.l Entering SMS Menu
RssI:S
9:263m
To enter the SMS Menu, Press [CLEAR key in Normal State.
6 voice 3 text
[voice] [text]
On initial SMS Menu Screen, display the numbers ofnew Voice Mails and Text Mails.
5.3.2 Voice Message
® Entering Voice Mail Menu
6 voice 3 text
[voice] [text]
To enter the Voice Mail Menu, Press [RECALL] key in the initial SMS Menu State.
6/14 9 : 07am
VOICE MAIL
52
Hyundai Electronics
0 Industries Co., Ltd.
03366302730
6 New Messa es
6 New Messages
ERASE] QUIT]
Display the last received Voice Mail lnfon'nation ( reception data/time, call-back phone number, the
number ofthe stored messages in MC ).
Display is scrolled with 2 seconds interval.
® View the scrolled message
Scroll the display with [UH/[DOWN] or [ " ], [ # ] keys.
® Escape from Voice Menu to SMS menu screen
Press [STORE] or [CLEAR] key.
6 voice 3 text
[voice] text]
® Erase the received Voice Mail Information
6 New Messages
ERASE] [QUIT
Press [RECALL] key in Voice Mail Menu,
ERASEthis?
I'YES ] [ N0 ]
The Erase Continuation Menu is displayed. And then,
To execute this erase, press [RECALL] key.
0 voice 3 text
[voice] [text]
The Voice Mail Information is erased, then the initial SMS Menu is displayed.
To cancel this erase, press [STORE] or [CLEAR] key.
53
Hyundai Electronics
0 Industries oo., Ltd.
(4) Notification ofNo new Voice Mail
0 voice 3 text
[voice] [text]
When New Voice Mail not exist, Press [RECALL] key to enter the Voice Mail Menu, then
N0 Rxed VM Info.
[QUIT]
Message that Received Voice Mail lnfom'iation not exist is displayed.
To return the initial SMS Menu, Wait for 3 second or press [STORE] or [CLEAR] key.
63 Calling to the received callback phone number
6 New Messages
ERASE] [QUIT
Press [SEND] key in Voice Mail Menu Voice.
03366302730
Call Back phone number is displayed Then, hook~offthe phone.
Calling. ..
03366302730
Call to the received callback phone number,
5.3.3 Text Message
® Entering Text Mail Menu
0 voice 3 text
voice] [text
To enter the Text Mail Menu, Press [RECALL] key in the initial SMS Menu State.
54
"Ill
Hyundai Electronics
Industries Co., Ltd.
6/14 12:01pm
03366302 730
03366302730
[ERASE] [NEXT]
Display the first new received Text Mail Information ( reception data/time, call-back phone number,
the received messages )i
Display is scrolled with 2 seconds interval.
(2) Erase the received Text Mail Information.
03366302730
[ERASE] [NEXT]
Press [RECALL] key in Text Mail Menu.
ERASE this"
[YES ] NO ]
The Erase Confirmation Menu is displayed, And then,
To execute this erase, press [RECALL] keyr
6/14 1:00pm
03366306976
03366306976
[ERASE] [NEXT]
The Text Mail Information is erased, then the next Text Mail Information is displayed
To cancel this erase, press [STORE] or [CLEAR] key.
03366302730
[ERASE] NEXT]
Return the Text Menu,
® View the next new Text Mail Information
03366302730
[ERASEl [NEXT]
55
Hyundai Electronics
0“ Industries Co., Ltd.
When the Text Mail Information is displayed, Press [STORE] key.
6/14 1:00pm
03 366306976
03366306976
[ERASE] [NEXT]
The next new Text Mail Information is displayed, and the previous Text Mail Information is inserted
into the old Text Mail list,
® View the old Text Mail List
03366306976
ERASE] [NEXT
Press of [STORE key to view the next new Text Mail is continued, and then,
When the display ofnew Text Mail Information is ended, the old Text Mail list is displayed
>03366302730
ERASE] [VIEW
(5) Scroll the old Text Mail List information
Scroll the display with [UP]/[DOWN]i
© View old Text Mail Information
>03366302730
[ERASE] Qgsw]
Press [STORE] keyi
6/14 12:01pm
03366302730
03366302730
The selected old Text Mail lnfonnation is displayed,
56
Hyundai Electronics
0 Industries Co., Ltd.
Display is scrolled with 2 seconds interval.
(7) Erase the old Text Mail lnformation
03366302730
[ERASE] [QUIT]
Press [RECALL] key when the Text Mail List or Information is displayed.
C8) Registering the received callback number on speed-dial list
03366302730
[ERASEl [QUIT]
Press [SEND] key when the Text Mail List or Information is displayed.
CB#:03366302730
[SAVE] UIT]
Call Back phone number is displayed. Then, Press [RECALL] key to select the [SAVE].
03366302730
lnput the number ofthe speed-dial address. (4.5 Speed Dialing Function)
® Calling to the received callback phone number
CB#:03366302730
[SAVE] UIT]
Call Back phone number is displayed, Then, Press [SEND] key again.
03366302730
Call Back phone number is displayed Then, hook-offthe phone.
57
Hyundai Electronics
. Industries Co., Ltd.
Ca'l "I 1' ng . . .
03366302730
Call to the received callback phone number.
5.3.4 SMS Menu Control Key Definition
################
LEFT] RIGHT]
[RECALL] key : Execute the displayed function on [LEFT],
[STORE] key : Execute the displayed function on [RIGHT].
[CLEAR] key : Cancel or Return.
[UP] [DOWN] key : Scroll the display.
58
Hyundai Electronics
Industries Co., Ltd.
“H

ll Troubleshooting
l When you think the terminal is out of order.
Problems
Action
0 In case of no indication at LCD
0 Make sure you turn on the terminalt
If the switch is on, turn off it and turn on
again.
0 In case that LCD displays “No Service”.
a Move the terminal to service area because the
place where the tercimal is located is out of
service coverage.
0 In case that you hear terminal is beeping
from ringer or you don’t hear any sound
from earpiece.
0 Put a handset on adequate position because
it’s misplaced.
. In case that Battery indication is blinking
“l”,and a terminal is beeping from ringer
periodically.
0 Apply external because barley
discharged.
power
0 In case that ringer is not ringing when a
call is in coming.
0 Press up key a couple of times to adjust ringer
volume, because ringer is in silent steg
In case that the simple remedy does not work with Terminal, contact to the local agency
where you purchase or service center and technician will solve the trouble.
59
Hyundai Electronics
Industries Co., Ltd.
04-1
2.
FWT Technical Specification
Classification
HWP-l20
7 i— " “nwp-zzo
Air interface
Comrnon air interface stanga7rd7
Frequency
1§fl(15:95u§f§ifi7. .
TX: 824 ~ 849MHZ
“is? ~ mm;
IS-9SB(l7S7-975A, J-S7TD»008)7 7
Tx: 1350 ~19lOMHz
7 R7X: 1930 ~ 179907MHz
Frequency accuracy 7 F013007Hz F9 1 l§0Hz 7 7 7 7 7
floutput power 777777 7 777 ZOML 7 77
RX sensitivity 7 7 7 7- 104dBm 77 7
Vocoder 8K/13K QCELP
E , ,, A , s, ,, EVRQ , ,,
i 77Chann7e| bandvyidl77 7 7 77 7 7 7 CQMA125Mhz 7 7 777
' MOD/DEMOD o QPSK/QPSK
Battery back-up 737/23 7 77 7 7 77 7 7 77 7 7 Ni—Cd 7 7
Capacity , 7” W §14V@,2A7,,
Talktime 7 7 77777 777 2 hours
; Standby time 70 hours
Serial port * Maintenance purpose
- Data service purpose
(lntemet. PC fax)
, Physical Qiysion (D7>§7W><2732><6767(mm) 7
Weightfincluding backpp battery) 9863
k Environmental Operatingteinperature -lO °C ~ +50 °C
: Power supply input power 7 7 7 777 7 7 l 170 ~ 2497V(120V), 50/60Hz
j Outpul power 7 DC 12V @ 2A 7777
' Etc Accessories - lntemal antenna: Di-Pole antenna
~ Power supply (SMPS)
~ External antenna (optional): lOdbi gain directional panel
antenna
- External Battery(opiional):
9.6V @ 7A
60
Source Exif Data: 
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.2
Linearized                      : No
Modify Date                     : 2000:06:28 17:17:38
Creator                         : Acrobat 3.0 Scan Plug-in
Producer                        : Acrobat 3.0 Scan Plug-in
Create Date                     : 2000:06:28 17:17:14
Page Count                      : 60
EXIF Metadata provided by EXIF.tools
FCC ID Filing: CKLHWP-220

Navigation menu