Hyundai IBT L15T0C060 COMMERCIAL User Manual G50TR TC ENGLISH

Hyundai IBT Corp. COMMERCIAL G50TR TC ENGLISH

USERS MANUAL

NEXTUser’s GuideType No. L15T0C060Model. G50TR/G50TC Dual Function Touch Monitor
U.S.A.U.S.FEDERAL COMMUNICATIONS COMMISSIONRADIO FREQUENCY INTERFERENCE STATEMENTINFORMATION TO THE USERNOTE : This equipment has been tested and found to comply with the limits for aClass B digital device pursuant to Part 15 of the FCC Rules.These limits are designed to provide reasonable protection against harmfulinterference in a residential installation.This equipment generates, uses, and can radiate radio frequency energy and, ifnot installed and used in accordance with the instructions, may cause harmfulinterference to radio communications.However, there is no guarantee that interference will not occur in a particularinstallation.If this equipment does cause harmful interference to radio or television reception,which can be determined by turning the equipment off and on, the user isencouraged to try to correct the interference by one or more of the followingmeasures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet of a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for assistance.Changes or modification not expressly approved by the party responsible forcompliance could void the user's authority to operate the equipment.Connecting of peripherals requires the use of grounded shielded signal cables.
WE HYUNDAI IT CORP.Ami-ri Bubal-Eub Ichon-Si Kyungki-Do467-860 KOREAdeclare under our sole responsibility that the product:to which this declaration relates is in conformity with thefollowing standard(s) or other normative document(s)following the provisions of the Low Voltage Directive 73/23/EEC,93/68/EEC and the EMC Directive 89/336/EEC.KOREA / May 6, 2008 Jong Won, Choi Ho Suk, Chon(Place and date of issue) (Name and signature of authorized person)DECLARATION OF CONFORMITYKind of equipment : LCD TOUCH MONITORType-Designation : L15T0C060 Safety : IEC60950-1:2002EMC : EN 55022/1998+A1:2000+A2:2003EN 55024 :1998+A1:2001+A2:2003EN61000-3-2:2000+A2:2005EN61000-3-3:1995+A1:2001+A2:2005TUV SUD Product Service GmbHRidlerstrasse 65 - 80339 Munchen - Germany
G50TR/G50TCDual Function Touch MonitorContents 1. Introduction ...................................1/232. Safety Information ........................1/233. Installing the monitor ...................4/233-1. Packing List .........................................4/233-2. Selecting a suitable location ..............5/233-3. Rear View & Signal Input Jacks .........5/233-4. Connecting the monitor .....................6/233-5. Setting the refresh rate ......................9/23Preset Timing Table ............................9/233-6. Way to Install driver for touch monitor .............................................10/233-7. User’s Environment ...........................11/234. Adjusting the picture ..................13/234-1. Using the On Screen Display ...........14/234-2. Direct access buttons .......................14/234-3. OSD Adjustments .............................15/235. Display power management ..... 19/23Reducing power consumption ..............19/236. Troubleshooting ..........................20/237. Specifications ..............................23/23
G50TR/G50TCDual Function Touch Monitor1. Introduction2. Safety Information1/23This manual contains instructions for installing and operatingHYUNDAI IT G50TR/G50TC.HYUNDAI IT G50TR/G50TC. is a highly ergonomic color display unit.• 15" viewable XGA LCD• High quality screen re-scaling capability• VESA DPMS (Display Power Management Signaling)• VESA DDC1/2B compatibility• Advanced digital On-Screen-Display controls• Fast and accurate auto adjustment • Most advanced image scaling• Supporting VESA Flat Panel Monitor Physical Mounting Interface• Digital Signal Input by DVI-1.0 Compatibility • 5-wrie Resistive Touch monitor (G50TR)• Capacitive Touch Monitor (G50TC)This Monitor has been engineered and manufactured to assure your safety. You can prevent serious electrical shock and other hazards by keeping in mind the following:Do not place anything wet on the monitor or the powercord. Never cover the ventilation openings with anymaterial and never touch them with metallic or inflammable materials.
G50TR/G50TCDual Function Touch Monitor2/23Avoid operating the monitor in extreme heat, humidity or areas affected by dust. Temperature : 5~35°CHumidity : 30~80RH Be sure to turn the monitor off before plugging thepower cord into the socket. Make sure that the powercord and the other cords are securely and rightlyconnected.Overloaded AC outlets and extension cords are dangerous, as are frayed power cords and broken plugs, which may cause electric shock or fire. Call your service technician for replacement.Do not use sharp tools such as a pin or a pencil near the monitor, as they may scratch the LCD surface.Do not use a solvent, such as benzene, to clean the monitor, as it will damage the LCD surface.
G50TR/G50TCDual Function Touch MonitorCleaning and Maintenance• To avoid risk of electric shock, do not disassemble the display unit cabinet. Theunit is not user-serviceable. Remember to unplug the display unit from thepower outlet before cleaning.• Do not use alcohol (methyl, ethyl or isopropyl) or any strong dissolvent. Do notuse thinner or benzene, abrasive cleaners or compressed air.• Do not wipe the screen with a cloth or sponge that could scratch the surface.• To clean your antistatic screen, use water and a special microfiber screencleaning tissue used in optical lens cleaning, or lightly dampen a soft, cleancloth with water or a mild detergent.• If the instructions above do not help in removing stains, contact an authorizedservice agent. • The mains plug of the power supply cord shall remain readily operable. • An apparatus with CLASS I construction shall be connected to a mains socketoutlet with a protective earthing connection.3/23
G50TR/G50TCDual Function Touch Monitor4/23The following items should be found in the packaging.Above power cord can be changed upon different voltage areas. Pleasecontact your dealer if anything is missing or damaged.Other power cord except the cord packed in the product or longer than 3mmay affect EMC of the product in operating condition.3. Installing the monitor3-1. Packing List!UKAmerica/CanadaJapanAustraliaKoreaEuropeSouth AfricaPower CordSignal CableAudio CableDVI-D CableUSB Cable Manual CD & Touch Install CDAC/DC PowerAdapter
G50TR/G50TCDual Function Touch Monitor5/233-2. Selecting a suitablelocation3-3 Rear View & Signalinput Jacks• Place the monitor at least 30cm from other electrical or heat-emitting equipment and allow atleast 10cm on each side for ventilation.• Place the monitor in a position where no light shines directly onto or is reflected on the screen.• To reduce eye strain, avoid installing the display unit against a bright background such as awindow.• Position the monitor so that the top of the screen is no higher than eye level.• Position the monitor directly in front of you at a comfortable reading distance (around 45 to 90cm) Power In (12V DC ):Connectto AC/DC Adaptor Audio In : Connect to the jack , "Audio Out " of PC .Output PC Sound. Audio Out : Connect to Head Phone. D-Sub : Connect to the jack, "D-Sub" (Analog) of PC. DVI : Connect to the jack, "DVI" (Digital) of PC.USB : Connect to USB of PC Speaker : Output PC sound. USB12V DC A IN DVIA OUT D-SUB
G50TR/G50TCDual Function Touch Monitor6/233-4. Connecting the monitorBefore you start cabling your monitor, check that thepower is off on all units. To avoid any possibility ofelectric shock, always connect your equipment to properlyearthed outlets.1. Connect AC/DC Power Cable to Adaptor and then connectAdaptor Cable to Monitor through the jack "12V DC" .2. One end of "Audio Cable" to PC through the jack, "Audio Out".And the other end to Monitor " Audio In".3. Connect PC and Monitor through the jack, D-Sub (Analog signal) with D-Sub cable4. Connect PC and Monitor through the jack , DVI (Digital signal) with DVI Cable.!
G50TR/G50TCDual Function Touch Monitor5. Insert the other 15-pin signal cable connector into the 15-pin VGA connectionon your computer and screw it down. 6. Plug the power cord connection to connection on the monitor.7. Plug the other end of the power cord to your computer's main supply or to a100V-240V earthed electrical outlet.8. Turn on the monitor using the power switch and check that the power LED ison. If not, repeat steps 1,2,3,4,5,6 and 7 or refer to the Troubleshooting sectionof this guide.9. Turn on the power to the computer. The picture will appear within about 10seconds. Adjust the picture to obtain optimum picture quality. See sectionAdjusting the picture in this guide for more information.7/23
G50TR/G50TCDual Function Touch Monitor• Audio system OptionModel8/23!!This monitor has an audio system including two micro loudspeakers. Each of thetwo micro loudspeakers has an 2W (max.) output power. This system also supportsa headphone output jack.When this monitor is turned on, audio is always set up as off mode. Please useAUDIO direct access button on the front cover or On Screen Display to putaudio on. Speaker
G50TR/G50TCDual Function Touch Monitor9/233-5. Setting the refreshratePreset Timing TableFollow the instructions below to set your refresh rate in Windows98/ME/XP/2000/VISTA.1. Go to the configuration window(Start-Settings-Configuration window).2. Double click on the ‘Display’ icon.3. Click on the ‘Settings’ tab.4. Click on the ‘Advanced’ button.5. Click on ‘Adapter’ and select 60Hz from the list.6. Click on ‘Apply’ to accept the selected value.If the signal from the system doesn't equal to the preset timing mode, adjustthe mode with reference to the user’s guide of video card because the screenmay not be displayed.Optimum resoultion 1024 x 768 @ 60Hz !No.1234567891011121314Resolution640 x 350720 x 400640 x 480640 x 480640 x 480640 x 480800 x 600800 x 600800 x 600800 x 600832 x 6241024 x 7681024 x 7681024 x 768H-Freq31.4 KHz31.4 KHz31.4 KHz35.0 KHz37.8 KHz37.5 KHz35.1 KHz37.8 KHz48.0 KHz46.8 KHz49.7 KHz48.3 KHz56.4 KHz60.0 KHzV-Freq70 Hz70 Hz59 Hz66 Hz72 Hz75 Hz56 Hz60 Hz72 Hz75 Hz74 Hz60 Hz70 Hz75 HzModeIBMIBMIBMMACVESAVESAVESAVESAVESAVESAMACVESAVESAVESA
G50TR/G50TCDual Function Touch Monitor3-6. Way to Install driverfor touch monitorThe driver for touch screen software enables to have mutual communication totouch screen-controller through and SUB•Supporting organizationThis utility program enables test for the correction and draw test through thetouch screen.Including addition and removal.•Supporting many languagesIt's automatically installed according to the selected languages.English,Chinese,French,Spanish,German,Japanese,Italian and Dutch areavailable.The procedures for installing touch driver is as follows.1. Insert TouchKit-CD into CD-ROM driver.2. If inserting CD, according to the type of OS, the program is executivedautomatically and manually. 3. Please note the enclosed touch driver for the detailed installation of program.10/23
G50TR/G50TCDual Function Touch Monitor3-7. User’s EnvironmentKensington Security(Locking) SlotRecommended Ergonomic User’s Environment• Viewing angle of the monitor should be between -2~15 degree.• This display unit supports a Kensington-type security device to secure yourmonitor. Kensington lock is not included.• To purchase and install the Kensington locking device, please refer to thefollowing contact information.* Kensington Technology Group· Address : 2000 Alameda de las Pulgas 2F san mateo, California 94403-1289· Tel : +1 650 572 2700 · Fax : +1 650 572 9675 · Web-site : www.kensington.com11/2315o-2o
G50TR/G50TCDual Function Touch MonitorVESA MOUNT’G• This display unit supports VESA FPMPMI standard for 75mmx75mm screwmounting by giving 4 screw holes on the Rear Cover of the unit.• For buying VESA Flat Panel Monitor Mounting Devices, please contactfollowing information.Only M4 x10 size screw should be used for proper mounting.(Using wrong size screw may cause damages to the device)* Ergotron, Inc.· Address : Ergotron Europe Kuiperbergweg 50 1101 AG Amsterdam The Netherlands· Tel : +3 1 20 696 60 65 · Fax : +3 1 20 609 04 59 · E-mail : info.eu@ergotron.com12/23!
G50TR/G50TCDual Function Touch Monitor4. Adjusting the picture13/23You can adjust the screen display by using the buttons located below thescreen.
G50TR/G50TCDual Function Touch Monitor4-1. Using the On ScreenDisplay 4-2. Direct access buttons14/23To make adjustments in the On Screen Display, follow these steps:1. Push the MENU button to call the OSD to the screen. 2. Push the or button to choose the item you want to adjust. The selecteditem is highlighted.3. Push the SELECT button to adjust the highlighted item. 4. Use the or button to adjust the selection.5. Push the MENU button to return to the previous menu if you are in a submenu.6. The display unit automatically saves the new settings in 1 second after yourlast adjustments and the menu disappears. You can also push the MENU buttonto make the menu disappear.LED LAMPMENUSELECTPOWERDOWN / UP(- / + )LED Lamp shows the power on or off with its color.When the power is on, LED Lamp is fluorescing with Green orAmber color. In normal mode, its color is Green and in the savemode, the color changes to Amber."MENU" button has the function to make OSD Window be onthe screen or disappear.Decide the Input Signal between Analog and Digital.Power ON or OFF.This button has 4 functions.- Reducing/Increasing the sound volume.- In OSD Menu, it makes cursor move down.- In OSD Menu, it makes the data of Sub item decreased.- In OSD Menu, it makes the data of Sub item move to the left.
4-3. OSD AdjustmentsG50TR/G50TCDual Function Touch Monitor4-3. OSD AdjustmentsPICTUREBRIGHTNESSAdjusting the Brightness for all over the Screen.(At factory, they have set the initial Brightness to 50.)CONTRASTAdjusting the Contrast for all over the Screen.(At factory, they have set the initial Contrast to 50.)H.POSITIONMoving the position of the screen horizontally. V.POSITIONMoving the position of the screen vertically. PHASERefine the Picture delicately. CLOCKAdjust the size of the Picture Horizontally. * At DVI mode, H.POSITION,V-POSITION,PHASE,CLOCK,AUTO ADJUSTare not workable15/23
G50TR/G50TCDual Function Touch MonitorColor AUTO ADJUSTAdjusting the Picture Status to the optimum automatically. COLOR TEMPERATUREAdjusting Color Tone for all over the Picture.( At Digital mode, it is it not workable- USER : The user can adjust each color tone to its favorable tone like to theReddish, Greenish or Bluish.When the adjustment is concluded, you can set it and exit from theadjustment by pressing "MENU" button.- Bluish : This makes the color tone of the picture to the Bluish.- Reddish: This makes the color tone of the picture to the Reddish.AUTO COLORThe color for all over the screen is adjusted to the most desirable statusautomatically.* At DVI mode, AUTO ADJUST, COLOR TEMPERATURE, AUTO COLOR are notworkable16/23
G50TR/G50TCDual Function Touch MonitorOSD17/23OSD H.POSITIONMove OSD Window horizontally.OSD V.POSITIONMove OSD Window verticallyOSD TIMERSelect the time while OSD Window remains on the screen.(10 Sec, 20 Sec, 30 Sec, 40 Sec)TRANSPARENCYAdjust the Transparency of OSD Window.
G50TR/G50TCDual Function Touch MonitorMiscellaneousHot KeyLANGUAGEDecide the language for OSD Menu.RECALLIf you select "Recall", the Picture will be out of the range and thencome back to the range at almost same time.And all adjusted data will be back to the factory set.INPUT SELECTDecide the Input Signal between ANALOG and DIGITAL .AUDIOThe sound from Speakers or Head Phone will be ON or OFF.VOLUMEAdjusting the sound volume from speakers.SOUND VOLUMEPress “DOWN” button and Volume Control Bar appears on the screen. And then by using “DOWN “(Reducing),“ UP “ (Increasing) buttons, you can adjust the sound volume.MUTEPress " UP " button, and two choices (Mute ON or OFF) appear on the right-bottom area of thescreen.If you choose Mute ON, there will be No Sound. On the contrary, if Mute OFF, Sound will revive.18/23
G50TR/G50TCDual Function Touch MonitorIf the power management function of your computer is enabled, your monitorturns on and off automatically. You can control power management features fromyour computer.Your computer may have power management features which enable the computeror monitor to enter a power saving mode when the system is idle. You canreactivate the system by pressing any key or moving the mouse.The power button does not disconnect the monitor from the power source.The only way to isolate the monitor completely from if to unplug the powercable.19/235. Display power managementReducing powerconsumptionPower consumption19 W(Typ)1 W(Typ)0 WModeNormaloffUnpluggedLEDGreenOrangeNot illuminated!
G50TR/G50TCDual Function Touch Monitor6. Troubleshooting20/23ProblemBlank screenError message:Video mode notsupportedThe display does not enter power managementmodePossible solutionIf the power LED is not lit, push the Soft power switch or check theAC cord to turn the monitor on. If the display unit is poweredthrough the computer, check that the computer is switched on.The display unit might be in standby mode. Push one of thekeyboard keys. Check that the keyboard is properly connected tothe computer.Check that the signal cable connector is properly connected and thatthe connection pins are not bent or damaged. If the connector isloose, tighten the connector's screws.Check that the power cable is correctly connected to the display unitand to the power outlet. Check the resolution and the frequency on the video port of yourcomputer.Compare these values with the data in the Preset Timing Table.The video signal from the computer does not comply with VESADPMS standard. Either the computer or the graphics adapter is notusing the VESA DPMS power management function.If your monitor is not functioning properly, you may be able to solve the problemby following suggestions below :
G50TR/G50TCDual Function Touch Monitor21/23Possible solutionCheck that the signal cable connector is properly connected and thatthe connection pins are not bent or damaged. Try another colortemperature. Adjust the picture characteristics as described in the section OSDAdjustment(4-3).A problem with your graphics adapter or display unit. Contact yourservice representative.Check that the display resolution and frequency from your PC orgraphic adapter is an available mode for your monitor.In your PC, you can check through Control panel, Display, Settings.If the setting is not correct, use your computer utility program tochange the display settings.Check that the signal cable connector is properly connected and thatthe connection pins are not bent or damaged.If the connector is loose, tighten the connector’s screws.Check that the computer is switched on.To enter a power saving mode. You can reactivate the system bypressing any key or moving the mouse.ProblemColor defectsSize, position,shape or qualityunsatisfactoryDuplicatedimagesImage is notstableMessage : No signalThe power LED isa orange color
Possible solutionLED Indicator can be appear orange on changing of video mode orInput Signal.Check the Resolution and the frequency on the video part of yourcomputer. Compare these values with the data in the Preset TimingTable.ProblemThe power LED isa orange colorG50TR/G50TCDual Function Touch Monitor22/23Contacting serviceIf the above troubleshooting hints do not help you find a solution to the problem,contact an authorized service agent. If the monitor is sent for service, use theoriginal package if possible.Unplug the display unit from the power outlet and contact a service agent when:• The monitor does not operate normally according to the operating instructions.• The monitor exhibits a distinct change in performance.• The monitor has been dropped or the cabinet has been damaged.• The monitor has been exposed to rain, or any kind of liquid(like water) hasbeen spilled onto the monitor.
G50TR/G50TCDual Function Touch Monitor23/23LCDDisplay areaNumber of colorInput signalsFrequency rateMaximum bandwidthMaximum resolutionRecommended resolutionInput voltagePower consumptionPower managementPlug & PlayOSD menuAudio systemVESA FPMPMISafety and EMCOperating TemperatureWeightDimensions (W X H X D mm)• Specification is subject to change without notice.• HYUNDAI IT CORP. specification on “dead pixel” of LCD Panel applies to ISO 13406-2 Standard.7. Specifications15"viewable, Diagonal, Pixel pitch 0.29 mm, A-Si TFT304.1(H) x 228.1(V) mm16.2 million colorsR.G.B Analog, 15 pin D-sub / Digital TMDS(DVI-D)Horizontal : 31.0 to 60.0KHz, Vertical : 56 to 76Hz65 MHzAnalog : 1024 x 768@75Hz, Digital TMDS : 1024x 768@75Hz1024 x 768@60HzDC 12V 3.0A 19W(Typ.)VESA DPMSVESA DDC 1/2BBRIGHTNESS, CONTRAST, COLOR CONTROL, H/V-POSITION, CLOCK PHASE, AUTO COLOR, LANGUAGE, AUTO ADJUST, AUDIO, OSD H/V-POISTION, OSD TIMER, RECALL, INPUT SELECT2ch x 2 watts / Ear Phone Jack75 mm x 75 mm screw mountingFCC Class B, NRTL, TUV, CB, CE5 ~ 35O C2.75Kg unpacked, 4.1Kg packed348 X 340 X 185 mm

Navigation menu