Hyundai IBT L17T0D070 COMMERCIAL User Manual G70TR TC ENGLISH
Hyundai IBT Corp. COMMERCIAL G70TR TC ENGLISH
USERS MANUAL
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 972293 |
| Application ID | 6y8ObT9noqgquC/Sp55pfA== |
| Document Description | USERS MANUAL |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 62.11kB (776425 bits) |
| Date Submitted | 2008-07-17 00:00:00 |
| Date Available | 2008-07-17 00:00:00 |
| Creation Date | 2008-06-16 16:37:59 |
| Producing Software | Acrobat Distiller 7.0 (Windows) |
| Document Lastmod | 2008-06-18 15:39:03 |
| Document Title | G70TR_TC_ENGLISH |
| Document Creator | QuarkXPress 3.3K: LaserWriter 8 KH-8.7.3 |
| Document Author: | ì´ |
NEXT Type No. L17T0D070 Model. G70TR/G70TC Dual Function Touch Monitor User’s Guide For recycling please look into our web site www.hyundaiq.com U.S.A. U.S.FEDERAL COMMUNICATIONS COMMISSION RADIO FREQUENCY INTERFERENCE STATEMENT INFORMATION TO THE USER NOTE : This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet of a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for assistance. Changes or modification not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Connecting of peripherals requires the use of grounded shielded signal cables. DECLARATION OF CONFORMITY WE HYUNDAI IT CORP. Ami-ri Bubal-Eub Ichon-Si Kyungki-Do 467-860 KOREA declare under our sole responsibility that the product: Kind of equipment LCD TOUCH MONITOR Type-Designation L17T0D070 to which this declaration relates is in conformity with the following standard(s) or other normative document(s) Safety : IEC60950-1:2002 EMC : EN 55022/1998+A1:2000+A2:2003 EN 55024 :1998+A1:2001+A2:2003 EN61000-3-2:2000+A2:2005 EN61000-3-3:1995+A1:2001+A2:2005 following the provisions of the Low Voltage Directive 73/23/EEC, 93/68/EEC and the EMC Directive 89/336/EEC. TUV SUD Product Service GmbH Ridlerstrasse 65 - 80339 Munchen - Germany KOREA / May 6, 2008 Jong Won, Choi (Place and date of issue) (Name and signature of authorized person) Ho Suk, Chon G70TR/G70TC Dual Function Touch Monitor Contents 1. Introduction ...................................1/24 2. Safety Information ........................1/24 3. Installing the monitor ...................4/24 3-1. Packing List .........................................4/24 3-2. Instructions to Install the Stand ........5/24 3-3. Selecting a suitable location ..............6/24 3-4. Connecting the monitor .....................6/24 3-5. Setting the refresh rate ......................9/24 Preset Timing Table ..........................10/24 3-6. Way to Install driver for touch monitor .............................................11/24 3-7. User’s Environment ...........................12/24 4. Adjusting the picture ..................14/24 4-1. Using the On Screen Display ...........15/24 4-2. Direct access buttons .......................15/24 4-3. OSD Adjustments .............................16/24 5. Display power management ......20/24 Reducing power consumption ..............20/24 6. Troubleshooting ..........................21/24 7. Specifications ..............................24/24 G70TR/G70TC Dual Function Touch Monitor 1. Introduction This manual contains instructions for installing and operating HYUNDAI IT G70TR/G70TC. 2. Safety Information HYUNDAI IT G70TR/G70TC. is a highly ergonomic color display unit. • 17" viewable SXGA LCD • High quality screen re-scaling capability • VESA DPMS (Display Power Management Signaling) • VESA DDC1/2B compatibility • Advanced digital On-Screen-Display controls • Fast and accurate auto adjustment • Most advanced image scaling • Supporting VESA Flat Panel Monitor Physical Mounting Interface • Digital Signal Input by DVI-1.0 Compatability • 5-wrie Resistive Touch monitor (G70TR) • Capacitive Touch Monitor (G70TC) This Monitor has been engineered and manufactured to assure your safety. You can prevent serious electrical shock and other hazards by keeping in mind the following: Do not place anything wet on the monitor or the power cord. Never cover the ventilation openings with any material and never touch them with metallic or inflammable materials. 1/24 G70TR/G70TC Dual Function Touch Monitor Avoid operating the monitor in extreme heat, humidity or areas affected by dust. Temperature : 5~35°C Humidity : 30~80RH Be sure to turn the monitor off before plugging the power cord into the socket. Make sure that the power cord and the other cords are securely and rightly connected. Overloaded AC outlets and extension cords are dangerous, as are frayed power cords and broken plugs, which may cause electric shock or fire. Call your service technician for replacement. Do not use sharp tools such as a pin or a pencil near the monitor, as they may scratch the LCD surface. Do not use a solvent, such as benzene, to clean the monitor, as it will damage the LCD surface. 2/24 G70TR/G70TC Dual Function Touch Monitor Cleaning and Maintenance • • • • • • • To avoid risk of electric shock, do not disassemble the display unit cabinet. The unit is not user-serviceable. Remember to unplug the display unit from the power outlet before cleaning. Do not use alcohol (methyl, ethyl or isopropyl) or any strong dissolvent. Do not use thinner or benzene, abrasive cleaners or compressed air. Do not wipe the screen with a cloth or sponge that could scratch the surface. To clean your antistatic screen, use water and a special microfiber screen cleaning tissue used in optical lens cleaning, or lightly dampen a soft, clean cloth with water or a mild detergent. If the instructions above do not help in removing stains, contact an authorized service agent. The mains plug of the power supply cord shall remain readily operable. An apparatus with CLASS I construction shall be connected to a mains socket outlet with a protective earthing connection. 3/24 G70TR/G70TC Dual Function Touch Monitor 3. Installing the monitor The following items should be found in the packaging. 3-1. Packing List Power Cord UK Japan America/Canada Europe Audio Cable South Africa Australia AC/DC Power adapter Korea Signal Cable DVI-D Cable USB Cable Manual CD & Touch Install CD Above power cord can be changed upon different voltage areas. Please contact your dealer if anything is missing or damaged. Other power cord except the cord packed in the product or longer than 3m may affect EMC of the product in operating condition. 4/24 G70TR/G70TC Dual Function Touch Monitor 3-2. Selecting a suitable location • • • • • 3-3 Rear View & Signal input Jacks Place the monitor at least 30cm from other electrical or heat-emitting equipment and allow at least 10cm on each side for ventilation. Place the monitor in a position where no light shines directly onto or is reflected on the screen. To reduce eye strain, avoid installing the display unit against a bright background such as a window. Position the monitor so that the top of the screen is no higher than eye level. Position the monitor directly in front of you at a comfortable reading distance (around 45 to 90cm) Power In (12V DC ):Connect to AC/DC Adaptor Audio In : Connect to the jack , "Audio Out " of PC . Output PC Sound. Audio Out : Connect to Head Phone. D-Sub : Connect to the jack, "D-Sub" (Analog) of PC. DVI : Connect to the jack, "DVI" (Digital) of PC. Speaker : Output PC sound. USB : Connect to USB of PC. 5/23 5/24 G70TR/G70TC Dual Function Touch Monitor 3-4. Connecting the monitor Before you start cabling your monitor, check that the power is off on all units. To avoid any possibility of electric shock, always connect your equipment to properly earthed outlets. 6/24 G70TR/G70TC Dual Function Touch Monitor 1. 2. 3. 4. 5. 6. 7. 8. 9. Connect AC/DC Power Cable to Adaptor and then connect Adaptor Cable to Monitor through the jack "12V DC" . One end of "Audio Cable" to PC through the jack, "Audio Out". And the other end to Monitor " Audio In". Connect PC and Monitor through the jack, D-Sub (Analog signal) with D-Sub cable Connect PC and Monitor through the jack , DVI (Digital signal) with DVI Cable. Insert the other 15-pin signal cable connector into the 15-pin VGA connection on your computer and screw it down. Plug the power cord connection to connection on the monitor. Plug the other end of the power cord to your computer's main supply or to a 100V240V earthed electrical outlet. Turn on the monitor using the power switch and check that the power LED is on. If not, repeat steps 1,2,3,4,5,6 and 7 or refer to the Troubleshooting section of this guide. Turn on the power to the computer. The picture will appear within about 10 seconds. Adjust the picture to obtain optimum picture quality. See section Adjusting the picture in this guide for more information. 7/24 G70TR/G70TC Dual Function Touch Monitor • Audio system Option Model This monitor has an audio system including two micro loudspeakers. Each of the two micro loudspeakers has an 2Wrms (max.) output power. This system also supports a headphone output jack. When this monitor is turned on, audio is always set up as off mode. Please use AUDIO direct access button on the front cover or On Screen Display to put audio on. Speaker 8/24 G70TR/G70TC Dual Function Touch Monitor 3-5. Setting the refresh rate Follow the instructions below to set your refresh rate in Windows 98/ME/XP/2000/VISTA. 1. 2. 3. 4. 5. 6. Go to the configuration window(Start-Settings-Configuration window). Double click on the ‘Display’ icon. Click on the ‘Settings’ tab. Click on the ‘Advanced’ button. Click on ‘Adapter’ and select 60Hz from the list. Click on ‘Apply’ to accept the selected value. 9/24 G70TR/G70TC Dual Function Touch Monitor Preset Timing Table If the signal from the system doesn't equal to the preset timing mode, adjust the mode with reference to the user’s guide of videocard because the screen may not be displayed. No. 10 11 12 13 14 15 16 17 18 Resolution 640 x 350 720 x 400 640 x 480 640 x 480 640 x 480 640 x 480 800 x 600 800 x 600 800 x 600 800 x 600 832 x 624 1024 x 768 1024 x 768 1024 x 768 1152 x 864 1152 x 870 1280 x 1024 1280 x 1024 H-Freq V-Freq Mode 31.4 KHz 31.4 KHz 31.4 KHz 35.0 KHz 37.8 KHz 37.5 KHz 35.1 KHz 37.8 KHz 48.0 KHz 46.8 KHz 49.7 KHz 48.3 KHz 56.4 KHz 60.0 KHz 67.5 KHz 68.7 KHz 64.0 KHz 80.0 KHz 70 Hz 70 Hz 59 Hz 66 Hz 72 Hz 75 Hz 56 Hz 60 Hz 72 Hz 75 Hz 74 Hz 70 Hz 75 Hz 60 Hz 75 Hz 75 Hz 60 Hz 75 Hz IBM IBM IBM MAC VESA VESA VESA VESA VESA MAC VESA VESA VESA VESA VESA MAC VESA VESA Optimum resoultion 1280 x 1024 @ 60Hz 10/24 10/23 G70TR/G70TC Dual Function Touch Monitor 3-6. Way to Install driver for touch monitor The driver for touch screen software enables to have mutual communication to touch screen-controller through and SUB • Supporting organization This utility program enables test for the correction and draw test through the touch screen.Including addition and removal. • Supporting many languages It's automatically installed according to the selected languages. English,Chinese,French,Spanish,German,Japanese,Italian and Dutch are available. The procedures for installing touch driver is as follows. 1. Insert TouchKit-CD into CD-ROM driver. 2. If inserting CD, according to the type of OS, the program is executived automatically and manually. 3. Please note the enclosed touch driver for the detailed installation of program. 11/24 G70TR/G70TC Dual Function Touch Monitor 3-7. User’s Environment Recommended Ergonomic User’s Environment • Viewing angle of the monitor should be between -2~15 degree. 15 o -2 Kensington Security (Locking) Slot • • This display unit supports a Kensington-type security device to secure your monitor. Kensington lock is not included. To purchase and install the Kensington locking device, please refer to the following contact information. * Kensington Technology Group · Address : 2000 Alameda de las Pulgas 2F san mateo, California 94403-1289 · Tel : +1 650 572 2700 · Fax : +1 650 572 9675 · Web-site : www.kensington.com 12/24 G70TR/G70TC Dual Function Touch Monitor VESA MOUNT’G • • This display unit supports VESA FPMPMI standard for 75mmx75mm screw mounting by giving 4 screw holes on the Rear Cover of the unit. For buying VESA Flat Panel Monitor Mounting Devices, please contact following information. Only M4 x10 size screw should be used for proper mounting. (Using wrong size screw may cause damages to the device) * Ergotron, Inc. · Address : Ergotron Europe Kuiperbergweg 50 1101 AG Amsterdam The Netherlands · Tel : +3 1 20 696 60 65 · Fax : +3 1 20 609 04 59 · E-mail : info.eu@ergotron.com 13/24 G70TR/G70TC Dual Function Touch Monitor 4. Adjusting the picture You can adjust the screen display by using the buttons located below the screen. 14/24 G70TR/G70TC Dual Function Touch Monitor 4-1. Using the On Screen Display To make adjustments in the On Screen Display, follow these steps: 1. Push the MENU button to call the OSD to the screen. 2. Push the or button to choose the item you want to adjust. The selected item is highlighted. 3. Push the SELECT button to adjust the highlighted item. 4. Use the or button to adjust the selection. 5. Push the MENU button to return to the previous menu if you are in a submenu. 6. The display unit automatically saves the new settings in 1 second after your last adjustments and the menu disappears. You can also push the MENU button to make the menu disappear. LED LAMP LED Lamp shows the power on or off with its color. When the power is on, LED Lamp is fluorescing with Green or Amber color. In normal mode, its color is Green and in the save mode, the color changes to Amber. MENU "MENU" button has the function to make OSD Window be on the screen or disappear. SELECT Decide the Input Signal between Analog and Digital. POWER Power ON or OFF. DOWN / UP This button has 4 functions. - Reducing/Increasing the sound volume. - In OSD Menu, it makes cursor move down. - In OSD Menu, it makes the data of Sub item decreased. - In OSD Menu, it makes the data of Sub item move to the left. 4-2. Direct access buttons (- / + ) 15/24 G70TR/G70TC Dual Function Touch Monitor 4-3. OSD Adjustments PICTURE BRIGHTNESS Adjusting the Brightness for all over the Screen. (At factory, they have set the initial Brightness to 50.) CONTRAST Adjusting the Contrast for all over the Screen. (At factory, they have set the initial Contrast to 50.) H.POSITION Moving the position of the screen horizontally. (At DVI mode, this function is not workable) V.POSITION Moving the position of the screen vertically. (At DVI mode, this function is not workable) PHASE Refine the Picture delicately. (Picture adjustment is not visible. At DVI mode, it is not workable) CLOCK Adjust the size of the Picture Horizontally. (At DVI mode, it is not worlable) 16/24 16/23 G70TR/G70TC Dual Function Touch Monitor AUTO ADJUST Adjusting the Picture Status to the optimum automatically. ( At DVI mode, it is not workable) Color COLOR TEMPERATURE Adjusting Color Tone for all over the Picture.( At Digital mode, it is it not workable - USER : The user can adjust each color tone to its favourable tone like to the Reddish, Greenish or Bluish. When the adjustment is concluded, you can set it and exit from the adjustment by pressing "MENU" button. - Blue : This makes the color tone of the picture to the Bluish. - Red : This makes the color tone of the picture to the Reddish. AUTO COLOR The color for all over the screen is adjusted to the most desirable status automatically. (At DVI mode, it is not supported.) 17/24 G70TR/G70TC Dual Function Touch Monitor OSD OSD H.POSITION Move OSD Window horizontally. OSD V.POSITION Move OSD Window vertically OSD TIMER Select the time while OSD Window remains on the screen. (10 Sec, 20 Sec, 30 Sec, 40 Sec) TRANSPARENCY Adjust the Transparency of OSD Window. 18/24 G70TR/G70TC Dual Function Touch Monitor Miscellaneous LANGUAGE Decide the language for OSD Menu. RECALL If you select "Recall", the Picture will be out of the range and then come back to the range at almost same time. And all adjusted data will be back to the factory set. INPUT SELECT Decide the Input Signal between ANALOG and DIGITAL . AUDIO The sound from Speakers or Head Phone will be ON or OFF. VOLUME Adjusting the sound volume from speakers. Hot Key SOUND VOLUME Press “DOWN” button and Volume Control Bar appears on the screen. And then by using “DOWN “(Reducing),“ UP “ (Increasing) buttons, you can adjust the sound volume. MUTE Press " UP " button, and two choices (Mute ON or OFF) appear on the right-bottom area of the screen. If you choose Mute ON, there will be No Sound. On the contrary, if Mute OFF, Sound will revive. 19/24 G70TR/G70TC Dual Function Touch Monitor 5. Display power management Reducing power consumption If the power management function of your computer is enabled, your monitor turns on and off automatically. You can control power management features from your computer. Your computer may have power management features which enable the computer or monitor to enter a power saving mode when the system is idle. You can reactivate the system by pressing any key or moving the mouse. Mode LED Normal Green 32 W(Typ) off Orange 1 W(Typ) Unplugged Not illuminated Power consumption 0W The power button does not disconnect the monitor from the power source. The only way to isolate the monitor completely from if to unplug the power cable. 20/24 G70TR/G70TC Dual Function Touch Monitor 6. Troubleshooting If your monitor is not functioning properly, you may be able to solve the problem by following suggestions below : Problem Blank screen Possible solution If the power LED is not lit, push the Soft power switch or check the AC cord to turn the monitor on. If the display unit is powered through the computer, check that the computer is switched on. The display unit might be in standby mode. Push one of the keyboard keys. Check that the keyboard is properly connected to the computer. Check that the signal cable connector is properly connected and that the connection pins are not bent or damaged. If the connector is loose, tighten the connector's screws. Check that the power cable is correctly connected to the display unit and to the power outlet. Error message: Video mode not supported Check the resolution and the frequency on the video port of your computer. Compare these values with the data in the Preset Timing Table. The display does not enter power management mode The video signal from the computer does not comply with VESA DPMS standard. Either the computer or the graphics adapter is not using the VESA DPMS power management function. 21/24 G70TR/G70TC Dual Function Touch Monitor Problem Possible solution Color defects Check that the signal cable connector is properly connected and that the connection pins are not bent or damaged. Try another color temperature. Size, position, shape or quality unsatisfactory Adjust the picture characteristics as described in the section OSD Adjustment(4-3). Duplicated images A problem with your graphics adapter or display unit. Contact your service representative. Image is not stable Check that the display resolution and frequency from your PC or graphic adapter is an available mode for your monitor. In your PC, you can check through Control panel, Display, Settings. If the setting is not correct, use your computer utility program to change the display settings. Message : No signal Check that the signal cable connector is properly connected and that the connection pins are not bent or damaged. If the connector is loose, tighten the connector’s screws. Check that the computer is switched on. The power LED is a orange color To enter a power saving mode. You can reactivate the system by pressing any key or moving the mouse. 22/24 G70TR/G70TC Dual Function Touch Monitor Problem Possible solution The power LED is a orange color LED Indicator can be appear orange on changing of video mode or Input Signal. Check the Resolution and the frequency on the video part of your computer. Compare these values with the data in the Preset Timing Table. Contacting service If the above troubleshooting hints do not help you find a solution to the problem, contact an authorized service agent. If the monitor is sent for service, use the original package if possible. Unplug the display unit from the power outlet and contact a service agent when: • • • • The monitor does not operate normally according to the operating instructions. The monitor exhibits a distinct change in performance. The monitor has been dropped or the cabinet has been damaged. The monitor has been exposed to rain, or any kind of liquid(like water) has been spilled onto the monitor. 23/24 G70TR/G70TC Dual Function Touch Monitor 7. Specifications LCD Display area Number of color Input signals Frequency rate Maximum bandwidth Maximum resolution Recommanded resolution Input voltage Power consumption Power management Plug & Play OSD menu Audio system VESA FPMPMI Safety and EMC Operating Temperature Weight Dimensions (W X H X D mm) 17"viewable, Diagonal, Pixel pitch 0.29 mm, A-Si TFT 337.92(H) x 270.336(V) mm 16.7 million colors R.G.B Analog, 15 pin D-sub / Digital TMDS(DVI-D) Horizontal : 31.0 to 80.0KHz, Vertical : 56 to 76Hz 135 MHz Analog : 1280 x 1024@75Hz, Digital TMDS : 1280x 1024@60Hz 1280 x 1024@60Hz DC 12V 3.5A 32W(Typ.) VESA DPMS VESA DDC 1/2B BRIGHTNESS, CONTRAST, COLOR CONTROL, H/V-POSITION, CLOCK PHASE, AUTO COLOR, LANGUAGE, AUTO ADJUST, AUDIO, OSD H/V-POISTION, OSD TIMER, RECALL, INPUT SELECT 2ch x 2 watts / Ear Phone Jack 75 mm x 75 mm screw mounting FCC Class B, NRTL, TUV, CE, CB 5 ~ 35O C 4.95Kg unpacked, 6.4Kg packed 382 X 403 X 200 mm • Specification is subject to change without notice. • HYUNDAI IT CORP. specification on “dead pixel” of LCD Panel applies to ISO 13406-2 Standard. 24/24
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.6 Linearized : No XMP Toolkit : Adobe XMP Core 4.0-c316 44.253921, Sun Oct 01 2006 17:08:23 Producer : Acrobat Distiller 7.0 (Windows) Create Date : 2008:06:16 16:37:59+09:00 Creator Tool : QuarkXPress 3.3K: LaserWriter 8 KH-8.7.3 Modify Date : 2008:06:18 15:39:03+09:00 Metadata Date : 2008:06:18 15:39:03+09:00 Format : application/pdf Creator : 이 Title : G70TR_TC_ENGLISH Document ID : uuid:f378bebc-bc6a-47f9-9526-13583edee717 Instance ID : uuid:d932275c-2cc0-4e58-a7f5-918edc31c7ba Has XFA : No Page Count : 28 Author : 이EXIF Metadata provided by EXIF.tools