Hyundai IBT L19A00001 19" LCD Monitor User Manual ATT E MANUAL
Hyundai IBT Corp. 19" LCD Monitor ATT E MANUAL
Users Manual
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 592796 |
| Application ID | 5qUcu6RdNGcGVdxMC1vJ8Q== |
| Document Description | Users Manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 105.61kB (1320164 bits) |
| Date Submitted | 2005-10-17 00:00:00 |
| Date Available | 2005-10-17 00:00:00 |
| Creation Date | 2005-10-14 15:12:59 |
| Producing Software | Acrobat Distiller 7.0 (Windows) |
| Document Lastmod | 2005-10-14 15:13:29 |
| Document Title | Microsoft Word - ATT.E_MANUAL.doc |
| Document Creator | PScript5.dll Version 5.2 |
| Document Author: | Owner |
FCC ID : PJIL19A00001 ATTACHMENT E. - USER’S MANUAL - HYUNDAI CALIBRATION & CERTIFICATION TECHNOLOGIES CO., LTD. SAN 136-1, AMI-RI, BUBAL-EUP, ICHEON-SI, KYOUNGKI-DO, 467-701, KOREA TEL:+82 31 639 8517 FAX:+82 31 639 8525 www.hct.co.kr Report No. : HCT-FO5-0905 1/1 NEXT Type No. L17A00000 / L19A00000 Model. L17T/L19T TFT LCD Color Multi Function Monitor User’s Guide U.S.A. U.S.FEDERAL COMMUNICATIONS COMMISSION RADIO FREQUENCY INTERFERENCE STATEMENT INFORMATION TO THE USER NOTE : This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet of a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for assistance. Changes or modification not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Connecting of peripherals requires the use of grounded shielded signal cables. DECLARATION OF CONFORMITY WE Hyundai ImageQuest CO., LTD. Ami-ri Bubal-Eub Ichon-Si Kyungki-Do 467-860 KOREA declare under our sole responsibility that the product: Kind of equipment LCD MONITOR Type-Designation L17A00000 / L19A00000 to which this declaration relates is in conformity with the following standard(s) or other normative document(s) Safety : EN60950-1:2002 EMC : EN 55013:2001+A1:2003 EN 55020 :2002+A1:2003 EN 55022 :1998+A1:2000+A2:2003 EN 55024 :1998+A1:2001+A2:2003 EN 61000-3-2:2000 EN 61000-3-3:1995+A1:2001 following the provisions of the Low Voltage Directive 73/23/EEC, 93/68/EEC and the EMC Directive 89/336/EEC. Accredited testlaboratory: TÜV Rheinland Am Grauen Stein 51105 Köln KOREA / September. 09, 2005 BYUNG SUHN, AHN (Place and date of issue) (Name and signature of authorized person) L17T/L19T TFT LCD Color Multi Function Monitor Contents 1. Introduction ...................................1/35 2. Safety Information ........................1/35 3. Installing the monitor ...................4/35 3-1. Packing List .........................................4/35 3-2. Selecting a suitable location ..............5/35 3-3. Connecting the monitor .....................5/35 3-4. Connecting the TV ..............................5/35 3-5. Setting the refresh rate ......................8/35 Preset Timing Table ............................9/35 3-6. User’s Environment ...........................10/35 4. Adjusting the picture(Monitor) .12/35 4-1. Using the On Screen Display ...........13/35 4-2. Direct access buttons .......................13/35 4-3. OSD Adjustments .............................14/35 5. Adjusting the picture(TV) ...........17/35 5-1. Direct access buttons .......................17/35 5-2. OSD Adjustments .............................18/35 6. TV Functions ................................21/35 7. Display power management ......29/35 Reducing power consumption ..............29/35 8. Troubleshooting ..........................31/35 9. Specifications ..............................34/35 L17T/L19T TFT LCD Color Multi Function Monitor 1. Introduction This manual contains instructions for installing and operating Hyundai ImageQuest L17T/L19T. Hyundai ImageQuest L17T/L19T is a highly ergonomic color display unit. 2. Safety Information • • • • • • • • • 17"/19” viewable SXGA LCD High quality screen re-scaling capability 100-240V AC input voltage, DC 12V 3.5A Adapter VESA DPMS (Display Power Management Signaling) VESA DDC1/2B compatibility Advanced digital On-Screen-Display controls Fast and accurate auto adjustment Most advanced image scaling Supporting VESA Flat Panel Monitor Physical Mounting Interface This Monitor has been engineered and manufactured to assure your safety. You can prevent serious electrical shock and other hazards by keeping in mind the following: Do not place anything wet on the monitor or the power cord. Never cover the ventilation openings with any material or touch them with metallic or inflammable materials. 1/35 L17T/L19T TFT LCD Color Multi Function Monitor Avoid operating the monitor in extreme heat, humidity or areas affected by dust. Temperature : 5~35°C Humidity : 30~80RH Be sure to turn the monitor off before plugging the power cord into the socket. Make sure that the power cord and the other cords are securely and rightly connected. Overloaded AC outlets and extension cords are dangerous, as are frayed power cords and broken plugs, which may cause electric shock or fire. Call your service technician for replacement. Do not use sharp tools such as a pin or a pencil near the monitor, as they may scratch the LCD surface. Do not use any solvent, such as benzene, to clean the monitor, as it will damage the LCD surface. 2/35 L17T/L19T TFT LCD Color Multi Function Monitor Cleaning and Maintenance • • • • • To avoid risk from electric shock, do not disassemble the cabinet of the unit. The unit is not user-serviceable. Remember to unplug the unit from the power outlet before cleaning. Do not use alcohol (methyl, ethyl or isopropyl) or any strong dissolvent. Do not use thinner or benzene, abrasive cleaners or compressed air. Do not wipe the screen with sponge/cloth that could scratch the surface. To clean your antistatic screen, use water and special microfiber-screencleaning tissue-used in optical lens cleaning, or a lightly dampened piece of soft, clean cloth with water or mild detergent. If the instructions above do not help in removing stains, contact an authorized service agent. 3/35 L17T/L19T TFT LCD Color Multi Function Monitor 3. Installing the monitor The following items should be found in the package. 3-1. Packing List Power Cord UK Japan Signal Cable America/Canada Europe South Africa Australia Audio Cable AC/DC Power adapter POW ER MUTE P-CH EDIT Korea PC S-VID SOUR EO INFO AIR/C ABLE MEN EXIT P-CH AUTO BRIG HTNE SS CONT LIST/F LOF STORE SIZE REVEA HOLD SUB PAGE INDEX – CH TV CE VOL TTX/M IX PRE,P VIDEO ANNE RAST SEAR CH Remote Conrtol wuth Batteries(AAA x 2) Installation Guide Compact Disc The power cord above can be changed upon different voltage areas. Please contact your dealer if anything is missing or damaged. Other power cord’s except the original packed in the product especially cards longer than 3m may affect EMC of the product in operating condition. 4/35 L17T/L19T TFT LCD Color Multi Function Monitor 3-2. Selecting a suitable location • • • • • 3-3. Connecting the monitor 1. 2. 3. 4. 5. Place the monitor at least 30cm from other electrical or heat-emitting equipment and allow at least 10cm on each side for ventilation. Place the monitor in a position where no light shines directly onto or is reflected on the screen. To reduce eye strain, avoid installing the display unit against a bright background such as a window. Position the monitor so that the top of the screen is no higher than the eye level. Position the monitor directly in front of you at a comfortable reading distance (around 45 to 90cm) Before you start cabling your monitor, check that the power is off on all units. To avoid any possibility of electric shock, always connect your equipment to properly earthed outlets. Insert the other 15-pin signal cable connector into the 15-pin VGA connection on your computer and screw it. Plug the power cord connection to the connection on the monitor. Plug the other end of the power cord to your computer's main supply or to a 100V-240V earthed electrical outlet. Turn on the monitor using the power switch and check that the power LED is on. If not, repeat steps 1,2,3 and 4 or refer to the Troubleshooting section of this guide. Turn on the power of the computer. The picture will appear within about 10 seconds. Adjust the picture to obtain optimum picture quality. See section Adjusting the picture in this guide for more information. 5/35 L17T/L19T TFT LCD Color Multi Function Monitor 3-4. Connecting the monitor - Connecting External A/V Devices • Connect RCA (Yellow) or S-Video cables to an appropriate external A/V device such as VCR, DVD or Camcorder. • Connect RCA audio cables to “Audio (R)” and “Audio (L)” terminals and the other ends to corresponding audio out terminals on the A/V device. - Connecting TV/CATV • Connect an antenna or CATV cable to the antenna terminal on the back of the monitor. DC 12 V D-SUB S-VIDEO VIDEO AUDIO ANTENNA RCA(Right) AUDIO Red-Cable RCA(Left) AUDIO White-Cable RCA VIDEO Yellow-Cable S-VIDEO Cable (Option) 6/35 L17T/L19T TFT LCD Color Multi Function Monitor • Audio system This monitor has an audio system including two micro loudspeakers. Each of two micro loudspeakers has an 2Wrms (typ.) output power. This system also supports a headphone output jack. This system has been tuned to get a best tone quality which an audio input level is under 300mVrms. if the input level is more than 600mVp-p, you must tune down the audio input as the audio output tone may be distorted. When the monitor is turned on, audio is always set up as off mode. Please use AUDIO direct access button on the front cover or On Screen Display to put audio on. Speaker 7/35 L17T/L19T TFT LCD Color Multi Function Monitor LED Indicator Power Switch 3-5. Setting the refresh rate Follow the instructions below to set your refresh rate in Windows 98/ME/XP/2000. 1. 2. 3. 4. 5. 6. Go to the configuration window(Start-Settings-Configuration window). Double click on the ‘Display’ icon. Click on the ‘Settings’ tab. Click on the ‘Advanced’ button. Click on ‘Adapter’ and select 60Hz from the list. Click on ‘Apply’ to accept the selected value. 8/35 L17T/L19T TFT LCD Color Multi Function Monitor Preset Timing Table If the signal from the system doesn't equal to the preset timing mode, adjust the mode with reference to the user guide of videocard because the screen may not be displayed. The recommended setting is a resolution of 1280x1024 and a refresh rate of 60Hz. No. Resolution Horizontal Frequency Refresh rate 10 11 12 13 14 720 x 400 640 x 480 640 x 480 800 x 600 800 x 600 800 x 600 800 x 600 832 x 624 1024 x 768 1024 x 768 1024 x 768 1152 x 864 1280 x 1024 1280 x 1024 31.5 KHz 31.5 KHz 37.5 KHz 35.2 KHz 37.9 KHz 48.1 KHz 46.9 KHz 49.7 KHz 48.4 KHz 56.5 KHz 60.0 KHz 67.5 KHz 63.9 KHz 80.0 KHz 70 Hz 60 Hz 75 Hz 56 Hz 60 Hz 72 Hz 75 Hz 75 Hz 60 Hz 70 Hz 75 Hz 75 Hz 60 Hz 75 Hz 9/35 L17T/L19T TFT LCD Color Multi Function Monitor 3-6. User’s Environment Recommended Ergonomic User’s Environment • Viewing angle of the monitor should be between 0~20 degree. 20o Kensington security slot Kensington Security (Locking) Slot • • This display unit supports a Kensington-type security device to secure your monitor. Kensington lock is not included. To purchase and install the Kensington locking device, please refer to the following contact information. * Kensington Technology Group · Address : 2000 Alameda de las Pulgas 2F san mateo, California 94403-1289 · Tel : +1 650 572 2700 · Fax : +1 650 572 9675 · Web-site : www.kensington.com 10/35 L17T/L19T TFT LCD Color Multi Function Monitor VESA MOUNT’G • • This unit supports VESA FPMPMI standard for 75mmx75mm screw mounting by giving 4 screw holes inside the base stand of the unit. For buying VESA Flat Panel Monitor Mounting Devices, please contact the following . Only M4 x10 size screw must be used for proper mounting. (Using wrong size screw may cause damages to the device) * Ergotron, Inc. · Address : Ergotron Europe Kuiperbergweg 50 1101 AG Amsterdam The Netherlands · Tel : +3 1 20 696 60 65 · Fax : +3 1 20 609 04 59 · E-mail : info.eu@ergotron.com Desk Mount Wall Mount 11/35 L17T/L19T TFT LCD Color Multi Function Monitor 4. Adjusting the picture You can adjust the screen display by using the buttons located below the screen. 1280X1024 V:60.0/H:63.9 12/35 L17T/L19T TFT LCD Color Multi Function Monitor 4-1. Using the On Screen Display 1. 2. 3. 4. 5. 6. Push the MENU button to call the OSD to the screen. The resolution and frequency are displayed at the top of the menu box for your information. Push the or button to choose the item you want to adjust. The selected item is highlighted. Push the SELECT button to adjust the highlighted item. Use the or button to adjust the selection. Push the MENU button to return to the previous menu if you are in a submenu. The display unit automatically saves the new settings in 1 second after your last adjustments and the menu disappears. You can also push the MENU button to make the menu disappear. 4-2. Direct access buttons AUTO ADJUST At first, a full screen such as Window's back ground will be displayed. Push the SELECT(AUTO) button to adjust the shape of the screen automatically. VOLUME Use the VOLUME button to select the volume adjustment. Adjust with or button. 13/35 L17T/L19T TFT LCD Color Multi Function Monitor 4-3. OSD Adjustments The OSD adjustments available to you are listed below. BRIGHTNESS Adjusts the brightness of the screen. CONTRAST Adjusts the contrast of the screen. COLOR CONTROL Color temperature affects the tint of the image. With lower color temperatures the image turns reddish and with higher temperatures bluish. There are three color settings available: BLUISH, REDDISH or USER. With the USER setting you can set individual values for red, green and blue. MISCELLANEOUS RECALL Recall the saved color data. OSD TIMER You can set the displayed time of OSD Menu window on the screen by using this adjustment. 14/35 L17T/L19T TFT LCD Color Multi Function Monitor OSD POSITION Adjust the OSD menu's horizontal or vertical position on the screen. AUTO COLOR Optimum color setting is auto programmed for user’s convenience. AUDIO VOLUME Adjust the audio volume level. SOUND OFF This menu is used to choose audio on / off. TREBLE Emphasize high frequency audio. BASE Emphasize low frequency audio. AUTO ADJUST You can adjust the shape of the screen automatically at the full screen pattern. LANGUAGE You can select the language in which adjustment menus are displayed. The following languages are available : English, French, German, Italian, Spanish, Swedish, Finnish, Danish, Portuguese, Dutch (Option Russia, Korean, Japanese, chinese) 15/35 L17T/L19T TFT LCD Color Multi Function Monitor H/V. POSITION H POSITION Adjust the horizontal position of the entire screen image. V POSITION Adjust the vertical position of the entire screen image. CLOCK PHASE PHASE Adjust the noise of the screen image. CLOCK Adjust the horizontal size of the entire screen image. SOURCE No function. (Only supportable by the optional appliance.) 16/35 L17T/L19T TFT LCD Color Multi Function Monitor 5. Adjusting the picture (TV) 5-1. Direct access buttons LED INDICATOR /Receive window for Remote controller POWER SWITCH Use this button to change the video source Video sources are changed in the following order : PC → S-VIDEO → VIDEO → TV Use this button to select the volume adjustment. Then, adjust with the Up or Down button. Open the On-Screen-Display and select the highlighted function. 17/35 L17T/L19T TFT LCD Color Multi Function Monitor Select a function on the OSD. Moves the selector right or left on the OSD. Increases or decreases the values of the selected function. Increases or decreases the channel number. 5-2. OSD Adjustments The OSD adjustments are listed below. BRIGHTNESS Adjust the brightness of the screen. CONTRAST Adjust the contrast of the screen. IMAGE ADJUST SATURATION Adjust the color saturation of the video image. TINT Adjust the color Tint of the video image. SHARPNESS Adjust the sharpness and softness of the video image. 18/35 L17T/L19T TFT LCD Color Multi Function Monitor MISCELLANEOUS RECALL Recall the saved color data. OSD TIMER You can set the time. The OSD Menu window will be displayed on the screen by using this adjustment. OSD POSITION Adjusts the OSD menu's horizontal or vertical position on the screen. L19T TTX LANGUAGE(OPTION) AUDIO VOLUME Adjusts the audio volume level. SOUND OFF This menu is used to turn the choose audio on /off. TREBLE Emphasizes high frequency audio. BASE Emphasizes low frequency audio. LANGUAGE You can select the language in which adjustment menus are displayed. The following languages are available : English, French, German, Italian, Spanish, Swedish, Finnish, Danish, Portuguese and Dutch. 19/35 L17T/L19T TFT LCD Color Multi Function Monitor SOURCE This menu is used to choose the desired input signal source. There are four signal sources available : - Analog RGB : 15 pin D-sub, Analog signal - S-video : MINI DIN, Separate video signal - Composite Video : RCA Jack, Composite video signal - TV : Antenna or CATV signal TV CH SEARCHING This Function is to scan the broadcasting channels in your location. PR(CH) EDIT You can change the channel or PR No with this function. CH FINE TUNE To make the video image as clear as possible. TV INPUT Select a channel system : Air or Cable. 20/35 L17T/L19T TFT LCD Color Multi Function Monitor 6. TV Functions POWER MUTE PRE,P – CH P-CH EDIT PC S-VIDEO SOURCE INFO VIDEO TV AIR/CABLE SEARCH MENU VOL EXIT P-CHANNEL AUTO BRIGHTNESS CONTRAST TTX/MIX LIST/FLOF STORE HOLD SIZE REVEAL SUB PAGE INDEX 1. POWER ON/OFF 2. PROGRAM EDIT 3. S-VIDEO MODE 4. PC MODE 5. SELECT INPUT SIGNALS; PC, S-VIDEO, VIDEO, TV 6. DISPLAY CURRENT STATUS 7. MOVE LEFT/RIGHT VOLUME UP/DOWN 8. DISPLAY OSD MENU ON SCREEN 9. VOLUME UP/DOWN 10. AUTO ADJUSTMENT (IN PC MODE) 11. ADJUST THE BRIGHTNESS 12. SOUND ON/OFF 13. NUMERIC KEYPADS (CHANNEL ACCESS IN TV MODE) 14. PREVIOUS PROGRAM 15. VIDEO MODE 16. TV MODE 17. CHANNEL SEARCH 18. TV INPUT SELECT 19. MOVE UP/DOWN PROGRAM UP/DOWN TELETEXT PAGE UP/DOWN 20. PROGRAM UP/DOWN 21. TURN OFF THE OSD 22. ADJUST THE CONTRAST 23. BUTTON FOR TELETEXT(OPTION) 21/35 BACK L17T/L19T TFT LCD Color Multi Function MonitorNEXT • Channel Search - PAL In order to watch TV, Multimedia Kit shall be installed to your monitor. Following instructions are based on using remote controller, and MENU(↵) button in remote controller is compatible with SELECT button of the monitor. You can scan for the frequency ranges available in your country. GER EST DEN SWE FIN ESP+FRA FRA ITA GBR AUS NZL RUS IRL CHN USA KOR JPN 1. Press the MENU(↵) button and select TV icon. 2. Select CH SEARCHING and you can see country list. 3. Choose your country by +/- key, then press MENU(↵) button to go to PR SEARCHING. If your country is not listed, contact the distributors or service representatives. • Auto Pr This function is to search the channels automatically. Select AUTO PR and press MENU(↵) button for automatic channel search. Scanned channels are automatically allocated to each PR No. 22/33 L17T/L19T TFT LCD Color Multi Function Monitor • MANUAL PR This function is to store the channels manually. a. Select MANUAL PR. b. Select TV CH by +/- buttons, then press MENU(↵) button. at channel number. You can see c. Change the channel by +/- buttons or numeric buttons, and press EXIT. d. If you choose CH FINE TUNE and press MENU(↵), you can at the number. see e. You can tune the TV screen by +/- buttons, then press EXIT. f. If you select PR and press MENU(↵), you can change the PR number by +/- buttons. Then press EXIT. g. You can save or delete above changes by selecting STORAGE or DEL button by pressing MENU(↵) button. When storage or delete is finished, you can see YES in the menu, then press EXIT. •PR EDIT(PROGRAMME EDIT) The PR EDIT allows you to change the program numbers of stored channels. 23/35 L17T/L19T TFT LCD Color Multi Function Monitor 1. Press the MENU(↵) button and select TV icon. 2. Select PR EDIT and press MENU(↵) button, then you can see the current PR list. *If you want to move to other pages, move the cursor PAGE +/- and press MENU(↵) button. Then you can move to the other page by pressing +/button 3. Move the cursor to the PR number you want to change, then press MENU(↵) to go to the sub menu. at the channel 4. Select TV CH, then press MENU(↵) button. You can see numbers. 5. Change the channel by +/- buttons or numeric buttons, and press EXIT. at the 6. If you choose CH FINE TUNE and press MENU(↵), you can see number. 7. You can tune the TV screen by +/- buttons, then press EXIT. 8. You can save or delete these changes by selecting STORAGE or DEL button by pressing MENU(↵) button. When storage or delete is finished, you can see YES in the menu, press EXIT to go back to the previous menu. 24/35 L17T/L19T TFT LCD Color Multi Function Monitor • L19T Only TELETEXT (Optional) You can display teletext information from TV channels. – Displaying teletext information • Other Functions 1. Press TTX/MIX button to display teletext mode. 2. To see the actual broadcast simultaneously with the teletext page, press TTX/MIX button again. 3. Press TTX/MIX button again to exit from the teletext mode. *If you press MENU(↵) when you watch teletext information, you can go back to the top page. 1. HOLD : If the selected page is linked with several secondary pages, the secondary pages are displayed in sequence. To freeze the display on a given page, press HOLD button. When this button is pressed, the stop symbol is displayed at the top left corner of the screen and the automatic page change will be inhibited. If you press HOLD button again, the automatic change resumes. 2. REVEAL : To see the hidden text (answers like quiz games), press REVEAL button. 3. LIST/FLOF : To select between LIST mode and FLOF mode. 25/35 L17T/L19T TFT LCD Color Multi Function Monitor 4. FLOF mode : In FLOF mode, press the colored button corresponding to the topic that you wish to select. (The available topics are listed on the status information line) the page displayed with additional color-coded information that can be selected in the same way. a) RED button : If you want to go to the previous page, press RED button. b) Green button : If you wan to go to the next page, press GREEN button. 5. STORE : In LIST mode, you can store teletext pages with following step. a. Select LIST mode, and you can see four 3-digit numbers are displayed in different colors at the bottom of the screen. b. Press the colored button corresponding to the page that should be replaced. c. Enter the new page number using numeric buttons. d. Repeat steps b. c. for each page to be stored, using a different colored button each time. e. Press STORE button until the corresponding blocks blink. 6. SIZE : Press SIZE button once, the letter size of upper half of the screen will be doubled. Press SIZE button twice, the letter size of lower half of the screen will be doubled. Press SIZE button three times, the letter size gets normal. 7. SUB PAGE : If there are secondary pages in current teletext information, you can go to secondary pages by pressing SUB PAGE and enter its 4-digit number. 26/35 L17T/L19T TFT LCD Color Multi Function Monitor • Channel Search - NTSC TV INPUT First of all, you can select the Air or Cable before setup the Channel Searching. 1. Press the MENU(↵) button and select TV icon. 2. Move cursor to TV INPUT using the +/- buttons. 3. Press the MENU(↵) to Select TV INPUT, then select AIR or CABLE by using the +/buttons. 4. Press the EXIT button to go back to the previous menu. You can scan for the frequency ranges available in your country. 27/35 L17T/L19T TFT LCD Color Multi Function Monitor • Channel Edit • Channel Fine Tune 1. Press the MENU(↵) button and select TV icon. 2. Select CH SEARCHING and you can see country list. 3. Choose your country by +/- key, then press MENU(↵) button to go to CH SEARCHING. If your country is not listed, contact the distributors or service representatives. . Select CH EDIT by +/- buttons, then press MENU(↵) button. You can save or delete above changes by selecting DEL or ADD button by pressing MENU(↵) button. 2. If you choose CH FINE TUNE and press MENU(↵), you can see at the number. 3. You can tune the TV screen by +/- buttons, then press EXIT. 1. Select CH FINE TUNE by +/- buttons, then press MENU(↵) button. You can adjust CH FINE TUNE value by +/- buttons. 2. Press the EXIT button to go back to the previous menu. 28/35 L17T/L19T TFT LCD Color Multi Function Monitor 7. Display power management Reducing power consumption If the power management function of your computer is enabled, your monitor turns on/off automatically. You can control power management features from your computer. Your computer may have power management features which enable the computer or monitor to enter a power saving mode when the system is idle. You can reactivate the system by pressing any key or moving the mouse. Mode LED Power consumption Normal Green 40 W off Orange Unplugged Not illuminated L17T : 3.5 W L19T : 5W 0W The power button does not disconnect the monitor from the mains. The only way to isolate the monitor completely from the mains supply is to unplug the mains cable. 29/35 L17T/L19T TFT LCD Color Multi Function Monitor 8. Troubleshooting (TV) If this product is not functioning properly, you may be able to solve the problem by by the following below ; Problem Possible solution Color defects If the screen color is not suitable for viewing. You can select “Recall” button in the OSD menu. This function returns to the initial factor setting values. (Page 4) No channel searching If it could not find channels please check it again according to the following steps. • The cable connection must be secure. • TV input (Air/CATV) • Country selection must be correct. You should select the appropriate country to your location. (PAL : Page 22, NTSC : Page 27) Blue screen /No signal If the screen shows only blue color or No signal message, Please check whether you have selected the right signal source. -Analog RGB, S-video, Composite-video, TV (page 6) The remote control If the remote control does not operate well. Please check the batteries. does not work. • Batteries are correctly inserted according to • Batteries must be replaced if dead. and marking. 30/35 L17T/L19T TFT LCD Color Multi Function Monitor 6. Troubleshooting (Monitor) If this product is not functioning properly, you may be able to solve the problem by by the following below ; Problem Blank screen Possible solution If the power LED is not lit, push the Soft power switch or check the AC cord to turn the monitor on. If the unit is powered through the computer, check that the computer is switched on. The unit might be in standby mode. Push one of the keyboard keys. Check that the keyboard is properly connected to the computer. Check that the signal cable connector is properly connected and that the connection pins are not bent or damaged. If the connector is loose, tighten the connector's screws. Check that the power cable is correctly connected to the unit and to the power outlet. Error message: Video mode not supported The display does not enter power management mode Check the resolution and the frequency on the video port of your computer. Compare these values with the data in the Preset Timing Table. The video signal from the computer does not comply with VESA DPMS standard. Either the computer or the graphics adapter is not using the VESA DPMS power management function. 31/35 L17T/L19T TFT LCD Color Multi Function Monitor Problem Possible solution Color defects Check that the signal cable connector is properly connected and that the connection pins are not bent or damaged. Try another color temperature. Size, position, shape or quality unsatisfactory Adjust the picture characteristics as described in the section OSD Adjustment(4-3). Duplicated images A problem with your graphics adapter or display unit. Contact your service representative. Image is not stable Check that the resolution and frequency from your PC or graphic adapter is an available mode for your monitor. In your PC, you can check through Control panel, Display, Settings. If the setting is not correct, use your computer utility program to change the display settings. Message : No signal Check that the signal cabel connector is properly connected and that the connection pins are not bent or damaged. If the connector is loose, tighten the connector’s screws. Check that the computer is switched on. The power LED is a orange color To enter a power saving mode. You can reactivate the system by pressing any key or moving the mouse. 32/35 L17T/L19T TFT LCD Color Multi Function Monitor Problem The power LED is a orange color Possible solution LED Indicator can be orange color on changing of video mode or Input Signal. Check the resolution and the frequency on the video part of your computer. Compare these values with the data in the Preset Timing Table. Contacting service If the above troubleshooting hints do not help you find a solution to the problem, contact an authorized service agent. If the monitor is sent for service, use the original package if possible. Unplug the unit from the power outlet and contact a service agent when: • • • • The monitor does not operate normally according to the operating instructions. The monitor exhibits a distinct change in performance. The monitor has been dropped or the cabinet has been damaged. The monitor has been exposed to rain, or water or liquid has been spilled onto the monitor. 33/35 L17T/L19T TFT LCD Color Multi Function Monitor 9. Specifications • L17T LCD Pixel pitch Display area Number of color Frequency rate Maximum bandwidth Maximum resolution Recommanded resolution Input voltage Power consumption Power management Plug & Play OSD menu Built in Speaker VESA FPMPMI Ergonomics, Safety and EMC Operating Temperature Weight Dimensions (W X H X D mm) 17"viewable, Diagonal, A-Si TFT 0.264 x 0.264mm 337.920 x 270.336 mm 16.2Mil Horizontal : 31.0 to 80.0KHz, Vertical : 56 to 75Hz 135 MHz 1280 x 1024@75Hz 1280 x 1024@60Hz DC 12V 3.5A 40W VESA DPMS VESA DDC 1/2B MONITOR : BRIGHTNESS, CONTRAST, COLOR CONTROL, MISCELLANEOUS, AUDIO, AUTO ADJUST, LANGUAGE, H/V. POSITION, CLOCK-PHASE, SOURCE TV : BRIGHTNESS, CONTRAST, IMAGE ADJUST, MISCELLANEOUS, AUDIO, LANGUAGE, SOURCE, TV 2ch x 2watts 75 x 75 mm screw mounting TCO FCC Class B, CE, cTÜVus, TÜV-GS 5 ~ 35O C 4.5Kg unpacked, 6.0Kg packed 372 X 395 X 185 mm • Specification is subject to change without notice for performance improvement. 34/35 L17T/L19T TFT LCD Color Multi Function Monitor • L19T LCD Pixel pitch Display area Number of color Frequency rate Maximum bandwidth Maximum resolution Recommanded resolution Input voltage Power consumption Power management Plug & Play OSD menu Built in Speaker VESA FPMPMI Ergonomics, Safety and EMC Operating Temperature Weight Dimensions (W X H X D mm) 19"viewable, Diagonal, A-Si TFT 0.294 x 0.294mm 376.32 x 301.056 mm 16.7Mil Horizontal : 31.0 to 80.0KHz, Vertical : 56 to 75Hz 135 MHz 1280 x 1024@75Hz 1280 x 1024@60Hz DC 12V 3.5A 40W VESA DPMS VESA DDC 1/2B MONITOR : BRIGHTNESS, CONTRAST, COLOR CONTROL, MISCELLANEOUS, AUDIO, AUTO ADJUST, LANGUAGE, H/V. POSITION, CLOCK-PHASE, SOURCE TV : BRIGHTNESS, CONTRAST, IMAGE ADJUST, MISCELLANEOUS, AUDIO, LANGUAGE, SOURCE, TV 2ch x 2watts 75 x 75 mm screw mounting TCO FCC Class B, CE, cTÜVus, TÜV-GS 5 ~ 35O C 4.9Kg unpacked, 6.8Kg packed 420 X 441 X 185 mm • Specification is subject to change without notice for performance improvement. 35/35
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.4 Linearized : No XMP Toolkit : 3.1-701 Producer : Acrobat Distiller 7.0 (Windows) Creator Tool : PScript5.dll Version 5.2 Modify Date : 2005:10:14 15:13:29+09:00 Create Date : 2005:10:14 15:12:59+09:00 Metadata Date : 2005:10:14 15:13:29+09:00 Format : application/pdf Title : Microsoft Word - ATT.E_MANUAL.doc Creator : Owner Document ID : uuid:4a7d243d-7489-4bda-86b6-0b1be5df0415 Instance ID : uuid:876d24db-030e-4acd-9918-9940d2330b61 Page Count : 40 Author : OwnerEXIF Metadata provided by EXIF.tools