Hyundai IBT L19A0D061 19" LCD Monitor User Manual USERSMANUAL
Hyundai IBT Corp. 19" LCD Monitor USERSMANUAL
Contents
- 1. User Manual
- 2. Users manual
User Manual
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 333146 |
| Application ID | dx+skbuluNocw0F+1tUqVQ== |
| Document Description | User Manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 66.09kB (826154 bits) |
| Date Submitted | 2003-06-17 00:00:00 |
| Date Available | 2003-06-17 00:00:00 |
| Creation Date | 2003-05-27 23:34:13 |
| Producing Software | Acrobat PDFWriter 4.0 Windows¿ë |
| Document Lastmod | 2003-05-27 23:40:52 |
| Document Title | æ¯USERSMANUAL.PDF |
| Document Creator | æ¯Microsoft Word |
| Document Author: | æ¯í•¨ë³‘기 |
FCC ID : PJIL19A 0D061 ATTACHMENT E. - USER’S MANUAL - REPORT NO. : HCT-F03-0504 HYUNDAI C–TECH NEXT Type No. L19A0D061 ImageQuest L19T TFT LCD Color Monitior User’s Guide Click www.hyundaiQ.com BACK U.S.A. U.S.FEDERAL COMMUNICATIONS COMMISSION RADIO FREQUENCY INTERFERENCE STATEMENT INFORMATION TO THE USER NOTE : This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet of a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for assistance. Changes or modification not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. Connecting of peripherals requires the use of grounded shielded signal cables. NEXT BACK DECLARATION OF CONFORMITY WE ImageQuest CO., LTD. Ami-ri Bubal-Eub Ichon-Si Kyungki-Do 467-860 KOREA declare under our sole responsibility that the product: Kind of equipment COLOR MONITOR Type-Designation L19A0D061 to which this declaration relates is in conformity with the following standard(s) or other normative document(s) Safety : EN 60950 : 2000 EMC : EN 55022 : 1998, EN 55024 : 1998 EN 61000-3-2 : 1995+A1 : 1998+A2 : 1998 EN 61000-3-3 : 1995 following the provisions of the Low Voltage Directive 73/23/EEC, 93/68/EEC and the EMC Directive 89/336/EEC. Accredited testlaboratory: TÜV Rheinland Am Grauen Stein 51105 Köln KOREA / April. 24, 2003 HONG KI, KIM (Place and date of issue) (Name and signature of authorized person) NEXT L19T 19" TFT LCD Color Monitor BACK NEXT Contents 1. Introduction ...................................1/21 2. Safety Information ........................1/21 3. Installing the monitor ...................4/21 3-1. Packing List .........................................4/21 3-2. Selecting a suitable location ..............5/21 3-3. Connecting the monitor .....................5/21 3-4. Setting the refresh rate ......................8/21 Preset Timing Table ............................9/21 3-5. User’s Environment .............................9/21 4. Adjusting the picture ..................12/21 4-1. Using the On Screen Display ...........13/21 4-2. Direct access buttons .......................13/21 4-3. OSD Adjustments .............................14/21 5. Display power management ......17/21 Reducing power consumption ..............17/21 6. Troubleshooting ..........................18/21 7. Specifications ..............................21/21 BACK L19T 19" TFT LCD Color Monitor NEXT 1. Introduction This manual contains instructions for installing and operating ImageQuest L19T. ImageQuest L19T is a highly ergonomic color display unit. • • • • • • • • • 2. Safety Information 19" viewable SXGA LCD High quality screen re-scaling capability 100-240V AC input voltage VESA DPMS (Display Power Management Signaling) VESA DDC1/2B compatibility Advanced digital On-Screen-Display controls Fast and accurate auto adjustment Most advanced image scaling Supporting VESA Flat Panel Monitor Physical Mounting Interface This Monitor has been engineered and manufactured to assure your safety. You can prevent serious electrical shock and other hazards by keeping in mind the following: Do not place anything wet on the monitor or the power cord. Never cover the ventilation openings with any material and never touch them with metallic or inflammable materials. 1/21 BACK L19T 19" TFT LCD Color Monitor NEXT Avoid operating the monitor in extreme heat, humidity or areas affected by dust. Temperature : 5~35°C Humidity : 30~80RH Be sure to turn the monitor off before plugging the power cord into the socket. Make sure that the power cord and the other cords are securely and rightly connected. Overloaded AC outlets and extension cords are dangerous, as are frayed power cords and broken plugs, which may cause electric shock or fire. Call your service technician for replacement. Do not use sharp tools such as a pin or a pencil near the monitor, as they may scratch the LCD surface. Do not use a solvent, such as benzene, to clean the monitor, as it will damage the LCD surface. 2/21 L19T 19" TFT LCD Color Monitor BACK NEXT Cleaning and Maintenance • • • • • To avoid risk of electric shock, do not disassemble the display unit cabinet. The unit is not user-serviceable. Remember to unplug the display unit from the power outlet before cleaning. Do not use alcohol (methyl, ethyl or isopropyl) or any strong dissolvent. Do not use thinner or benzene, abrasive cleaners or compressed air. Do not wipe the screen with a cloth or sponge that could scratch the surface. To clean your antistatic screen, use water and a special microfiber screen cleaning tissue used in optical lens cleaning, or lightly dampen a soft, clean cloth with water or a mild detergent. If the instructions above do not help in removing stains, contact an authorized service agent. 3/21 BACK L19T 19" TFT LCD Color Monitor 3. Installing the monitor NEXT The following items should be found in the packaging. 3-1. Packing List Power Cord UK Japan Signal Cable America/Canada Europe South Africa Australia Audio Cable Compact Disc Korea Above power cord can be changed upon different voltage areas. Please contact your dealer if anything is missing or damaged. Other power cord except the cord packed in the product or longer than 3m may affect EMC of the product in operating condition. 4/21 L19T 19" TFT LCD Color Monitor 3-2. Selecting a suitable location • • • • • 3-3. Connecting the monitor 1. 2. 3. 4. BACK NEXT Place the monitor at least 30cm from other electrical or heat-emitting equipment and allow at least 10cm on each side for ventilation. Place the monitor in a position where no light shines directly onto or is reflected on the screen. To reduce eye strain, avoid installing the display unit against a bright background such as a window. Position the monitor so that the top of the screen is no higher than eye level. Position the monitor directly in front of you at a comfortable reading distance (around 45 to 90cm) Before you start cabling your monitor, check that the power is off on all units. To avoid any possibility of electric shock, always connect your equipment to properly earthed outlets. Insert the other 15-pin signal cable connector into the 15-pin VGA connection on your computer and screw it down. Plug the power cord connection to connection on the monitor. Plug the other end of the power cord to your computer's main supply or to a 100V-240V earthed electrical outlet. Turn on the monitor using the power switch and check that the power LED is on. If not, repeat steps 1,2,3 and 4 or refer to the Troubleshooting section of this guide. 5/21 BACK L19T 19" TFT LCD Color Monitor 5. NEXT Turn on the power to the computer. The picture will appear within about 10 seconds. Adjust the picture to obtain optimum picture quality. See section Adjusting the picture in this guide for more information. 6/21 L19T 19" TFT LCD Color Monitor BACK NEXT • Audio system This monitor has an audio system including two micro loudspeakers. Each of two micro loudspeakers has an 2Wrms (typ.) output power. This system also supports a headphone output jack. This system has been tuned to get a best tone quality which an audio input level is under 300mVrms. if the input level is more than 600mVp-p, you must tune down the audio input as the audio output tone may be distorted. When this monitor is turned on, audio is always set up as off mode. Please use AUDIO direct access button on the front cover or On Screen Display to put audio on. Speaker 7/21 L19T 19" TFT LCD Color Monitor BACK NEXT LED Indicator Power Switch 3-4. Setting the refresh rate Follow the instructions below to set your refresh rate in Windows 98/ME/XP/2000. 1. 2. 3. 4. 5. 6. Go to the configuration window(Start-Settings-Configuration window). Double click on the ‘Display’ icon. Click on the ‘Settings’ tab. Click on the ‘Advanced’ button. Click on ‘Adapter’ and select 60Hz from the list. Click on ‘Apply’ to accept the selected value. 8/21 L19T 19" TFT LCD Color Monitor BACK NEXT Preset Timing Table If the signal from the system doesn't equal to the preset timing mode, adjust the mode with reference to the user guide of videocard because the screen may not be displayed. The recommended setting is a resolution of 1280x1024 and a refresh rate of 60Hz. No. Resolution Horizontal Frequency Refresh rate 10 11 12 13 14 720 x 400 640 x 480 640 x 480 800 x 600 800 x 600 800 x 600 800 x 600 832 x 624 1024 x 768 1024 x 768 1024 x 768 1152 x 864 1280 x 1024 1280 x 1024 31.5 KHz 31.5 KHz 37.5 KHz 35.2 KHz 37.9 KHz 48.1 KHz 46.9 KHz 49.7 KHz 48.4 KHz 56.5 KHz 60.0 KHz 67.5 KHz 63.9 KHz 80.0 KHz 70 Hz 60 Hz 75 Hz 56 Hz 60 Hz 72 Hz 75 Hz 75 Hz 60 Hz 70 Hz 75 Hz 75 Hz 60 Hz 75 Hz 9/21 BACK L19T 19" TFT LCD Color Monitor NEXT 3-5. User’s Environment Recommended Ergonomic User’s Environment • Viewing angle of the monitor should be between 0~20 degree. 20o Kensington security slot Kensington Security (Locking) Slot • • This display unit supports a Kensington-type security device to secure your monitor. Kensington lock is not included. To purchase and install the Kensington locking device, please refer to the following contact information. * Kensington Technology Group · Address : 2000 Alameda de las Pulgas 2F san mateo, California 94403-1289 · Tel : +1 650 572 2700 · Fax : +1 650 572 9675 · Web-site : www.kensington.com 10/21 L19T 19" TFT LCD Color Monitor BACK NEXT VESA MOUNT’G • • This display unit supports VESA FPMPMI standard for 75mmx75mm screw mounting by giving 4 screw holes inside the base stand of the unit. For buying VESA Flat Panel Monitor Mounting Devices, please contact following information. * Ergotron, Inc. · Address : Ergotron Europe Kuiperbergweg 50 1101 AG Amsterdam The Netherlands · Tel : +3 1 20 696 60 65 · Fax : +3 1 20 609 04 59 · E-mail : info.eu@ergotron.com Desk Mount Wall Mount 11/21 L19T 19" TFT LCD Color Monitor BACK NEXT 4. Adjusting the picture You can adjust the screen display by using the buttons located below the screen. 1280X1024 V:60.0/H:63.9 12/21 L19T 19" TFT LCD Color Monitor 4-1. Using the On Screen Display 1. 2. 3. 4. 5. 6. BACK NEXT Push the MENU button to call the OSD to the screen. The resolution and frequency are displayed at the top of the menu box for your information. Push the or button to choose the item you want to adjust. The selected item is highlighted. Push the SELECT button to adjust the highlighted item. Use the or button to adjust the selection. Push the MENU button to return to the previous menu if you are in a submenu. The display unit automatically saves the new settings in 1 second after your last adjustments and the menu disappears. You can also push the MENU button to make the menu disappear. 4-2. Direct access buttons AUTO ADJUST At first display a full screen such as Window's back ground. Push the button SELECT(AUTO) to adjust the shape of screen automatically. VOLUME Use the button VOLUME to select the volume adjustment. Adjust with or button. 13/21 BACK L19T 19" TFT LCD Color Monitor NEXT 4-3. OSD Adjustments The OSD adjustments available to you are listed below. BRIGHTNESS Adjust the brightness of the screen. CONTRAST Adjust the contrast of the screen. COLOR CONTROL Color temperature affects the tint of the image. With lower color temperatures the image turns reddish and with higher temperatures bluish. There are three color settings available: Mode 1(a cool white), Mode 2(a warm white) or USER. With the USER setting you can set individual values for red, green and blue. MISCELLANEOUS RECALL Recall the saved color data. OSD TIMER You can set the displayed time of OSD Menu window on the screen by using this adjustment. OSD POSITION Adjust the OSD menu's horizontal or vertical position on the screen. 14/21 BACK L19T 19" TFT LCD Color Monitor NEXT AUDIO VOLUME Adjust the audio volume level. SOUND OFF This menu is used to choose audio on or off. TREBLE Emphasize high frequency audio. BASE Emphasize low frequency audio. AUTO ADJUST You can adjust the shape of screen automatically at the full screen pattern. LANGUAGE You can select the language in which adjustment menus are displayed. The following languages are available : English, French, German, Italian, Spanish, Swedish, Finnish, Danish, Portuguese and Dutch. H/V. POSITION H POSITION Adjusts the horizontal position of the entire screen image. V POSITION Adjusts the vertical position of the entire screen image. 15/21 L19T 19" TFT LCD Color Monitor BACK NEXT CLOCK PHASE PHASE Adjust the noise of the screen image. CLOCK Adjust the horizontal size of the entire screen image. SOURCE No function. (Only supportable by the optional appliance.) 16/21 BACK L19T 19" TFT LCD Color Monitor 5. Display power management Reducing power consumption NEXT If the power management function of your computer is enabled, your monitor turns on and off automatically. You can control power management features from your computer. Your computer may have power management features which enable the computer or monitor to enter a power saving mode when the system is idle. You can reactivate the system by pressing any key or moving the mouse. Mode LED Power consumption Normal Green 40 W off Orange 3.5 W Unplugged Not illuminated 0W The power button does not disconnect the monitor from the mains. The only way to isolate the monitor completely from the mains supply is to unplug the mains cable. 17/21 BACK L19T 19" TFT LCD Color Monitor NEXT 6. Troubleshooting If your monitor is not functioning properly, you may be able to solve the problem by following the suggestions below : Problem Blank screen Possible solution If the power LED is not lit, push the Soft power switch or check the AC cord to turn the monitor on. If the display unit is powered through the computer, check that the computer is switched on. The display unit might be in standby mode. Push one of the keyboard keys. Check that the keyboard is properly connected to the computer. Check that the signal cable connector is properly connected and that the connection pins are not bent or damaged. If the connector is loose, tighten the connector's screws. Check that the power cable is correctly connected to the display unit and to the power outlet. Error message: Video mode not supported Check the resolution and the frequency on the video port of your computer. Compare these values with the data in the Preset Timing Table. The display does not enter power management mode The video signal from the computer does not comply with VESA DPMS standard. Either the computer or the graphics adapter is not using the VESA DPMS power management function. 18/21 BACK L19T 19" TFT LCD Color Monitor Problem NEXT Possible solution Color defects Check that the signal cable connector is properly connected and that the connection pins are not bent or damaged. Try another color temperature. Size, position, shape or quality unsatisfactory Adjust the picture characteristics as described in the section OSD Adjustment(4-3). Duplicated images A problem with your graphics adapter or display unit. Contact your service representative. Image is not stable Check that the display resolution and frequency from your PC or graphic adapter is an available mode for your monitor. In your PC, you can check through Control panel, Display, Settings. If the setting is not correct, use your computer utility program to change the display settings. Message : No signal Check that the signal cabel connector is properly connected and that the connection pins are not bent or damaged. If the connector is loose, tighten the connector’s screws. Check that the computer is switched on. The power LED is a orange color To enter a power saving mode. You can reactivate the system by pressing any key or moving the mouse. 19/21 BACK L19T 19" TFT LCD Color Monitor Problem The power LED is a orange color NEXT Possible solution LED Indicator can be orange color on changing of video mode or Input Signal. Check the Resolution and the frequency on the video part of your computer. Compare these values with the data in the Preset Timing Table. Contacting service If the above troubleshooting hints do not help you find a solution to the problem, contact an authorized service agent. If the monitor is sent for service, use the original package if possible. Unplug the display unit from the power outlet and contact a service agent when: • • • • The monitor does not operate normally according to the operating instructions. The monitor exhibits a distinct change in performance. The monitor has been dropped or the cabinet has been damaged. The monitor has been exposed to rain, or water or liquid has been spilled onto the monitor. 20/21 L19T 19" TFT LCD Color Monitor 7. Specifications LCD Pixel pitch Brightness Response Time Display area Number of color Input signals Frequency rate Maximum bandwidth Maximum resolution Recommanded resolution Input voltage Power consumption Power management Plug & Play OSD menu Built in Speaker VESA FPMPMI Ergonomics, Safety and EMC Operating Temperature Weight Dimensions (W X H X D mm) BACK 19"viewable, Diagonal, A-Si TFT 0.294 x 0.294mm 250cd/m2 25msec 376.32 x 301.056 mm 16,7 milion colors R.G.B Analog, 15 pin D-sub Horizontal : 31.0 to 80.0KHz, Vertical : 56 to 75Hz 135 MHz 1280 x 1024@75Hz 1280 x 1024@60Hz 100-240 VAC, 1.0A 40W VESA DPMS VESA DDC 1/2B BRIGHTNESS, CONTRAST, COLOR CONTROL, MISCELLANEOUS, AUDIO, AUTO ADJUST, LANGUAGE, H/V. POSITION, CLOCK-PHASE, SOURCE 2ch x 2watts 75 x 75 mm screw mounting TCO, FCC Class B, CE, cULus, TÜV-GS, SEMKO 5 ~ 35O C 6.2Kg unpacked, 8.2Kg packed 420 X 441 X 185 mm • Specification is subject to change without notice for performance improvement. 21/21
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.3 Linearized : No Creator : .歯.Microsoft Word Create Date : 2003:05:27 23:34:13 Title : .歯.USERSMANUAL.PDF Author : .歯.함병기 Producer : Acrobat PDFWriter 4.0 Windows¿ë Modify Date : 2003:05:27 23:40:52+09:00 Page Count : 26EXIF Metadata provided by EXIF.tools