Hyundai IBT L24D3F080 LCD MONITOR User Manual

Download:
Mirror Download [FCC.gov]
Document ID	1534918
Application ID	I9ohng4usSTWbSoI3XcHQA==
Document Description	Users Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	326.36kB (4079490 bits)
Date Submitted	2011-09-01 00:00:00
Date Available	2011-09-01 00:00:00
Creation Date	2011-06-29 15:38:25
Producing Software	Adobe PDF Library 8.0
Document Lastmod	2011-06-29 15:38:42
Document Title	Users Manual
Document Creator	Adobe InDesign CS3 (5.0.4)

Type No. L24D3F080
Model. S243X / S243A
Multi Function 2D/3D Wide Monitor
User’s Guide
S243X / S243A
U.S.A. 2D/3D Wide Monitor
Multi Function
U.S.FEDERAL COMMUNICATIONS COMMISSION
RADIO FREQUENCY INTERFERENCE STATEMENT
INFORMATION TO THE USER
NOTE : This equipment has been tested and found to comply with the limits for a
Class B digital device pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful
interference in a residential installation.
This equipment generates, uses, and can radiate radio frequency energy and,
if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications.
However, there is no guarantee that interference will not occur in a particular
installation.
If this equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following
measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet of a circuit different from that to which
the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for assistance.
Changes or modification not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
Connecting of peripherals requires the use of grounded shielded signal cables.
2/31
S243X / S243A
D ECLARAT
IONFunction
OF CONFORM
ITYWide Monitor
Multi
2D/3D
WE
HYUNDAI IT CORP.
Ami-ri Bubal-Eub Ichon-Si Kyungki-Do
467-860 KOREA
declare under our sole responsibility that the product:
Kind of equipment
LCD MONITOR
Type-Designation
L24D3F080
to which this declaration relates is in conformity with the
following standard(s) or other normative document(s)
Safety : EN 60950-1:2002
EMC : EN 55022/1998+A1:2000+A2:2003
EN 55024 :1998+A1:2001+A2:2003
EN 61000-3-2:2006
EN 61000-3-3/A2:2005
following the provisions of the Low Voltage Directive 73/23/EEC,
93/68/EEC and the EMC Directive 89/336/EEC.
Accredited test laboratory:
TUV SUD Product Service GmbH.
Zertifizierstelle Ridlerstrasse 65,
80339 Munchen. Germany
KOREA / June 29, 2011
(Place and date of issue)
Jin Ho, Lee
(Name and signature of authorized person)
3/31
S243X / S243A
Multi Function 2D/3D Wide Monitor
Contents
1. Introduction............................................................................. 1/31
2. Safety Information.................................................................. 1/31
3. Cautions for Health &Safety.................................................. 3/31
4. Handling Instructions............................................................. 5/31
5. 3D Monitor Setting Guide...................................................... 6/31
6. Q&A for 3D Mode................................................................... 6/31
7. 3D Mode Specification............................................................ 8/31
8. Installing the monitor............................................................. 9/31
9. Adjusting the picture............................................................ 19/31
10. Display power management.............................................. 27/31
11. Troubleshooting.................................................................. 28/31
12. Specifications...................................................................... 31/31
S243X / S243A
Multi Function 2D/3D Wide Monitor
1. Introduction
This manual contains instructions for installing and operating
HYUNDAI IT CORP. S243X / S243A.
HYUNDAI IT CORP. S243X / S243A is a highly ergonomic color display unit.
•• 24” viewable WUXGA LCD
•• High quality screen re-scaling capability
•• VESA DPMS (Display Power Management Signaling)
•• VESA DDC1/2B compatibility
•• Advanced digital On-Screen-Display controls
•• DVI-1.0 & HDMI-1.3 Compatibility
•• Fast and accurate auto adjustment
•• Most advanced image scaling
•• Supporting VESA Flat Panel Monitor Physical Mounting Interface
•• Built in 3D Formatter, 2D/3D Convertible
2. Safety Information
This Monitor has been engineered and manufactured to assure your safety.
You can prevent serious electrical shock and other hazards by keeping in
mind the following:
Do not place anything wet on the monitor or
the power cord. Never cover the ventilation
openings with anymaterial and never touch
them with metallic or inflammable materials.
1/31
S243X / S243A
Multi Function 2D/3D Wide Monitor
Avoid operating the monitor in extreme heat,
humidity or areas affected by dust.
Temperature : 5~40°C
Humidity : 30~80RH
Be sure to turn the monitor off before plugging
the power cord into the socket. Make sure that
the power cord and the other cords are securely
and rightly connected.
Overloaded AC outlets and extension cords are
dangerous, as are frayed power cords and broken
plugs, which may cause electric shock or fire.
Call your service technician for replacement.
Do not use sharp tools such as a pin or a pencil
near the monitor, as they may scratch the LCD
surface.
Do not use a solvent, such as benzene, to clean
the monitor, as it will damage the LCD surface.
2/31
S243X / S243A
Multi Function 2D/3D Wide Monitor
Cleaning and Maintenance
•• To avoid to risk of electric shock, do not disassemble the Cabinet of display unit.
The Cabinet is not user-serviceable. Remember to unplug the display unit from
the power outlet before cleaning.
•• Do not use alcohol (methyl, ethyl or isopropyl) or any strong dissolvent. Do not
use thinner or benzene, abrasive cleaners or compressed air.
•• Do not wipe the screen with a cloth or sponge that could scratch the surface.
•• To clean your antistatic screen, use water and a special microfiber screen
cleaning tissue used in optical lens cleaning, or lightly dampen a soft, clean cloth
with water or a mild detergent.
•• If the instructions above do not help in removing stains, contact an authorized
service agent.
3. Cautions for Health &
Safety (Before use)
•• Viewing Time - Do not view the stereoscopic images continuously and take a
rest every 15 minutes.
•• Please view the monitor screen within a distance of 60cm ~ 1M.
- Warning
•• If you have any of the following symptoms, consult with a doctor before use.
- Neck, ear, heart disorder
- Convulsion, photosensitivity
- High blood pressure
3/31
S243X / S243A
Multi Function 2D/3D Wide Monitor
•• If you have any problems with your body such as convulsion, paralysis,
disorientation, fainting and confusion, etc. while using it, stop using it and go to
your doctor.
•• If you feel any problems as follows, stop using it and take a rest.
- Pain in the eyes, tears, dry eyes, heavy eyelids
- Nausea, vomiting, dizziness, stomach pain, perspiration
- Headache, heaviness in head or dizziness, dry mouth
- Sickness
- Caution
If you don’t feel better, go to your doctor.
•• Intoxicated and/or medicated persons should not use this product.
•• Persons with nearsightedness or farsightedness, difference in left and right
eyesight, or astigmatism should correct their visions adequately before using it.
Using the polarized glasses over glasses or contact lens does not cause any problem.
4/31
S243X / S243A
Multi Function 2D/3D Wide Monitor
- Fire / Accident Prevention
•• Do not handle the LCD monitor with bare hands. It can cause you to get injured.
•• Do not place a heavy object over LCD monitor, bend nor give it a shock. It can break
down or get damaged.
Do not disassemble or modify it. It can break down or cause a fire.
If it breaks down or get damaged, unplug the power cord and have it repaired.
4. Handling Instructions
How to use
•• When viewing stereoscopic images, please use the special polarized
glasses. Without this glasses, you can not enjoy stereoscopic images.
If you use some polarized glasses from other companies, you can not fully enjoy the
stereoscopic images.
•• Do no use the polarized glasses for other uses other than 3D viewing.
•• Do not touch the surface of the monitor screen with bare hands.
•• When the surface of the monitor screen gets dirty, wipe it clean softly with a
smooth cloth (cotton flannel). Using detergent, solvent, etc. can cause it to get
damaged.
•• If the stereoscopic images do not display correctly, read the 3D software “User’s
Manual” first, and follow it as described in the manual.
If they still display improperly, do not disassemble it and contact the Customer
Support.
•• For how to operate LCD monitor, read “Handling Manual.”
Please DO NOT disassemble the product.
5/31
S243X / S243A
Multi Function 2D/3D Wide Monitor
5. 3D Monitor Setting Guide
•• Optimal resolution for 3D viewing is 1920*1200/60Hz. If you run it on different
resolutions, its 3D effects can decrease.
•• Use signal input source at RGB under PC mode or DVI mode. DVI mode is
recommended.
•• For 3D viewing, go to 1:1 mode under Display Control of OSD MENU before viewing
it (Monitor Manual: see 25 page). Viewing on a different mode may decrease 3D
effects.
•• On 1:1 mode, the screen size changes according to the input resolution. It doesn’t
mean that it has some problems with it. It just operates 1:1 mode without scaling
the input signal.
•• Install the 3D Software. For details, see the Installation Guide.
6. Q&A for 3D Mode
•• There is something like oil stain on the monitor screen.
- It is due to interferences of light waves within the air layers between the surface
of LCD and the 3D filter. It is not defective.
•• 3D stereoscopic images are seen as two separate images.
1. When you don’t wear 3D glasses enclosed Please use the 3D glasses.
2. When you view it away from visual angle.
- To view 3D stereoscopic imaging optimally, you’d better keep the distance of 60 cm.
- 1m from the monitor screen.
- If you exceed 75° out of the left/right visual angle or 10° out of the top/bottom
visual angle while viewing 3D images, you cannot enjoy 3D images properly. So
keep the visual angle as provided above.
6/31
S243X / S243A
Multi Function 2D/3D Wide Monitor
3. When you don’t wear 3D glasses enclosed Please use the 3D glasses.
- 3D mode displays best in 1920*1200/60Hz resolution.
(See 3D Monitor Setting Guide above)
4. When the left/right images are reversed
-C
 hange the option to have the image on the right displayed in the horizontal
line of the odd number.
- Read 3D S/W User’s Manual enclosed.
-W
 hen the image signal is correct but PC input signal is reversed, go to OSD
MENU and PICTURE, and set the value of V-POSITION up or down in the unit of
1 pixel. You can enjoy 3D images clearly.
•• 3D stereoscopic images are seen as 2D images
- This monitor is a combined 2D/3D monitor. You can enjoy 3D images from
2D images only when you use 3D S/W enclosed (They may deteriorate their
stereoscopic quality, compared to the contents produced in 3D)
•• 3D images create Ghost effect
- It can happen slightly depending on 3D contents.
- It is due to the different stereoscopic imaging information of the camera when
they are manufactured.(Use 3D contents suitable to this product )
•• The monitor screen reflects my face.
- This monitor has a 3D filter on the surface of the panel. The reflection is caused by
it. You cannot remove it. To reduce the reflected lights, it is recommended that you
don’t have any light source behind your back.
7/31
S243X / S243A
Multi Function 2D/3D Wide Monitor
•• 3D screen displays dimly
- This product has a 3D filter on the LCD surface to increase 3D stereoscopic effects.
That makes it reduce brightness. Polarized glasses can reduce its brightness as
well.
7. 3D Mode Specification
Alignment distance
0.6 ~ 1m
3D Viewing Angle
H : 150 / V: ±10 degree
3D Glasses
45 degree (optical axis)
2D/3D Image
Convertible
3D Output Image Format
Interlace
8/31
S243X / S243A
Multi Function 2D/3D Wide Monitor
8. Installing the monitor
The following items should be found in the packaging.
8-1. Packing List
Power Cord
UK
Japan
America/Canada
Europe
South Africa
Australia
Signal Cable
DVI Cable
HDMI Cable
(Option)
USB Cable
(Option)
Audio Cable
Korea
Manual
3D Soft Program
3D Glasses
Above power cord can be changed upon different voltage areas.
Please contact your dealer if anything is missing or damaged.
Other power cord except the cord packed in the product or longer than 3m
may affect EMC of the product in operating condition.
9/31
S243X / S243A
Multi Function 2D/3D Wide Monitor
8-2. Selecting a suitable
location
•• Place the monitor at least 30cm from other electrical or heat-emitting equipment
and allow at least 10cm on each side for ventilation.
•• Place the monitor in a position where no light shines directly onto or is reflected
on the screen.
•• To reduce eye strain, avoid installing the display unit against a bright
background such as a window.
•• Position the monitor so that the top of the screen is no higher than eye level.
•• Position the monitor directly in front of you at a comfortable reading distance.
(around 45 to 90cm)
8-3. Connecting the PC
•• 15 pin D-sub / DVI-D /
HDMI
Before you start cabling your monitor, check that the power
is off on all units. To avoid any possibility of electric shock,
always connect your equipment to properly earthed outlets.
1. Insert the other 15-pin/DVI-D/HDMI signal cable connector into the
15-pin VGA/DVI-D/ HDMI connection on your computer and screw it down.
*When using DVI to HDMI cable connection, you must use audio connection and set “DVI to HDMI
AUDIO” menu to On.
2. Plug the power cord connection to connection on the monitor.
3. Plug the other end of the power cord to your computer's main supply or to a
100V-240V earthed electrical outlet.
4. Turn on the monitor using the power switch and check that the power LED is
on. If not, repeat steps 1,2,3 and 4 or refer to the Troubleshooting section of
this guide.
10/31
S243X / S243A
Multi Function 2D/3D Wide Monitor
•• Way to Connect
5. Turn on the power to the computer. The picture will appear within about 10
seconds. Adjust the picture to obtain optimum picture quality. See section adjusting
the picture in this guide for more information.
11/31
S243X / S243A
Multi Function 2D/3D Wide Monitor
•• Headphone
This monitor has an audio system including two micro loudspeakers. Each
of two micro loudspeakers has a 3W(max.) output power. This system also
supports a headphone output jack.
This system has been tuned to get a best tone quality which an audio input level is
under 500mv rms. If the input level is more than 500mv rms, you must tune down
the audio input as the audio output tone may be distorted.
12/31
S243X / S243A
Multi Function 2D/3D Wide Monitor
•• USB hub (Option)
The USB hub (Bus-powered mode) has 1 upstream port and 2 downstream ports.
The upstream port can be connected to the root hub of host PC or other
downstream port self-power hub. Two (2) downstream ports allow them to
connect another USB device such as USB mouse, joystick, printer etc.
This product might not work properly when it is connected with some products
whose electric consumption is over 100mA, since it's designed for BUS power.
USB 2 downstream ports
13/31
S243X / S243A
Multi Function 2D/3D Wide Monitor
8-4. Setting the refresh rate
Follow the instructions below to set your refresh rate in
Windows 98/ME/XP/2000/VISTA/7.
111 Go to the configuration window(Start-Settings-Configuration window).
222 Double click on the ‘Display’ icon.
333 Click on the ‘Settings’ tab.
444 Click on the ‘Advanced’ button.
555 Click on ‘Adapter’ and select 60Hz from the list.
666 Click on ‘Apply’ to accept the selected value.
14/31
S243X / S243A
Multi Function 2D/3D Wide Monitor
Preset Timing Table
If the signal from the system doesn't equal to the preset timing mode, adjust the
mode with reference to the user guide of videocard because the screen may not
be displayed.
Supported Mode
Analog
DVI
No.
Resolution
H-Freq.(KHz)
V-Freq.(Hz)
640 X 350
31.4
70.0
•
720 X 400
31.4
70.0
•
640 X 480
31.4
59.9
•
640 X 480
37.5
75.0
•
800 X 600
35.1
56.2
•
800 X 600
37.8
60.3
•
800 X 600
46.8
75.0
•
832 X 624
49.7
74.5
•
1024 X 768
48.3
60.0
•
•
•
•
10
1024 X 768
56.4
70.0
•
11
1024 X 768
60.0
75.0
•
12
1152 X 864
67.5
75.0
•
13
1152 X 870
68.6
75.0
•
14
1280 X 960
60.0
60.0
•
•
15
1280 X 1024
63.9
60.0
•
•
16
1280 X 1024
79.9
75.0
•
17
1680 X 1050
64.7
60.0
•
•
18
1600 X 1200
75.0
60.0
•
•
19
1920 X 1200
84.0
59.9
•
•
20
480 i/p
60
21
576 i/p
60
22
720 p
60
23
1080 i/p
60
비디오 모드
15/31
S243X / S243A
Multi Function 2D/3D Wide Monitor
8-5. Watching the
DVD/HDTV
•• Connecting component
cable
•• Connect component cable (Y, Pb, Pr) between output terminal (Y, Pb, Pr) of DVD
player and input terminal (Y, Pb, Pr) of DVD on the rear of W243D.
(Connect cable and terminal in the matching color)
•• Connect Audio cable between Audio output terminal of DVD player and Audio
input terminal of DVD Audio on the rear of W243D.
(Connect cable and terminal in the matching color)
Output terminal mark (Y, Pb, and Pr) of DVD player may be written as Y, B-Y,
R-Y/Y-Cb-Cr / Y-Pb-Pr.( It depends on DVD player)
16/31
S243X / S243A
Multi Function 2D/3D Wide Monitor
8-6. User’s Environment
Recommended Ergonomic User’s Environment.
•• Viewing angle of the monitor should be between 0~30 degree.
Supports Pivot.
The screen can be vertically rotated by
90 degrees.
This reduces the inconvenience of
having to drag scrollbars and roll mouse
wheels when working with documents
or surfing the web.
* In
case that pivot function is not
supported from the graphic card in
your pc, you could use pivot function
by downloading the program
through internet.
17/31
S243X / S243A
Multi Function 2D/3D Wide Monitor
Kensington Security
(Locking) Slot
•• This display unit supports a Kensington-type security device to secure your monitor.
Kensington lock is not included.
•• To purchase and install the Kensington locking device, please refer to the following
contact information.
* Kensington Technology Group
· Address : 2000 Alameda de las Pulgas 2F san mateo, California 94403-1289
· Tel : +1 650 572 2700 · Fax : +1 650 572 9675 · Web-site : www.kensington.com
VESA MOUNT’G
•• This display unit supports VESA FPMPMI standard for 100mmx100mm screw
mounting by giving 4 screw holes inside the base stand of the unit.
•• For buying VESA Flat Panel Monitor Mounting Devices, please contact following
information.
* Ergotron, Inc.
· Address : Ergotron Europe Kuiperbergweg 50 1101 AG Amsterdam the Netherlands
· Tel : +3 1 20 696 60 65 · Fax : +3 1 20 609 04 59 · E-mail : info.eu@ergotron.com
Desk Mount
Wall Mount
18/31
S243X / S243A
Multi Function 2D/3D Wide Monitor
9. Adjusting the picture
You can adjust the screen display by using the buttons located below
the screen.
P I C TU R E
B R I GH T N ES S
90
C ON T R A ST
60
H . POSI T I ON
50
V. POSI T I ON
50
PH A SE
76
C L OC K
50
A U TO A D JU S T
1920x1200 6 0 H z
AUTO ADJUST
SOURCE
VGA
MUTE VOLUME
The second Menu from the OSD can't be chosen in digital-mode.
19/31
S243X / S243A
Multi Function 2D/3D Wide Monitor
9-1. Using the On Screen
Display
To make adjustments in the On Screen Display, follow these steps:
111 Push the MENU button to call the OSD to the screen.
222 Push the
or
button to choose the group you want to adjust. The selected group is
highlighted.
333 Push the SELECT button.
444 Push the
or
button to choose the item you want to adjust.
555 Use the - or + button to adjust the selection.
666 Push the MENU button to return to the previous menu if you are in a submenu.
777 You can push the MENU button to make the menu disappear.
9-2. Direct access buttons
SELECT AUTO ADJUST
At first display a full screen such as Window's background.
Push the SELECT button to adjust the shape of screen automatically.
3D
–
Use the
button to switch the other mode from current mode.
VIRTUAL → SIDE BY SIDE → 3D OFF → VGA

VOLUME
Use the
button to select the Volume adjustment.
Adjust with – or + button.
MUTE
Use the
SOURCE
– button to switch the sound off temporarily.
Use the
button to switch the other input from current input.
VGA → COMPONENT → DVI → HDMI
VGA
COMPONENT
DVI
HDMI
20/31
S243X / S243A
Multi Function 2D/3D Wide Monitor
9-3. OSD Adjustments
PC ANALOG (D-SUB 15 PIN)
•• PICTURE
BRIGHTNESS
PIC T U R E
To adjust the brightness of the screen.
B R I GH T N ESS
90
C ON T R A ST
60
H . POSI T I ON
50
V. POSI T I ON
50
H.POSITION
PH A SE
76
To move image left and right.
C L OC K
50
V.POSITION
A U TO A D JU ST
1920x1200 60H z
VGA
CONTRAST
To adjust the contrast of the screen.
To move image up and down.
PHASE
To adjust the noise of the screen image.
CLOCK
To adjust the horizontal size of the entire screen image.
AUTO ADJUST
You can adjust the shape of the screen automatically into the full screen pattern.
(Not operational in DVI, HDMI and COMPONENT mode)
DVI MODE
BRIGHTNESS
PIC T U R E
B R I GH T N ESS
90
C ON T R A ST
50
To adjust the brightness of the screen.
CONTRAST
To adjust the contrast of the screen.
1920x1200 60H z
D VI
21/31
S243X / S243A
Multi Function 2D/3D Wide Monitor
HDMI, COMPONENT MODE
PICTURE MODE
You can select the type of picture which best corresponds to your viewing requirements.
The mode is changed in the following order by pressing - or + button.
STANDARD -> DYNAMIC -> MILD -> USER
STANDARD
For general Color tone.
DYNAMIC
To be Sharper image.
MILD
To be Smoother image.
USER
User can adjust directly settings of a screen menu.
* If you make any changes to these settings, the picture mode is automatically switched to User.
BRIGHTNESS
PIC T U R E
PI C T U R E M OD E
To adjust the brightness of the screen.
STA N D A R D
B R I GH T N ESS
90
CONTRAST
C ON T R A ST
50
To adjust the contrast of the screen.
SAT U R AT I ON
50
SH A R PN ESS
1 2 3 4 5
SATURATION
To adjust color density.
SHARPNESS
1920x1200 60H z
HDMI
To adjust sharpness of screen.
22/31
S243X / S243A
Multi Function 2D/3D Wide Monitor
•• COLOR
PC ANALOG (D-SUB 15 PIN)
COLOR TEMPERATURE
You can select the most comfortable colour tone to your eyes.
The mode is changed in the following order by pressing - or + button.
STANDARD -> REDDISH -> BLUISH -> USER
STANDARD
For general Color tone.
REDDISH
For Reddish color with warm tone.
BLUISH
For Bluish color with cool tone
USER
For adjusting degree of RGB as user wants
*If you make any changes to these settings, the Color Temperature mode is automatically switched to User.
RED
C OL OR
C OL OR T EM P
For adjusting the RED color as user wants.
STA N D A R D
R ED
48
GREEN
GR EEN
45
For adjusting the GREEN color as user wants.
BLUE
48
A U TO C OL OR
BLUE
For adjusting the BLUE color as user wants.
AUTO COLOR
1920x1200 60H z
VGA
TO adjust the horizontal size of the entire
screen image. (Not operational in DVI, HDMI
and COMPONENT mode)
23/31
S243X / S243A
Multi Function 2D/3D Wide Monitor
HDMI, DVI and COMPONENT MODE
COLOR TEMPERATURE
You can select the most comfortable colour tone to your eyes.
The mode is changed in the following order by pressing - or + button.
STANDARD -> REDDISH -> BLUISH -> USER
STANDARD
For general Color tone.
REDDISH
For Reddish color with warm tone.
BLUISH
For Bluish color with cool tone
USER
For adjusting degree of RGB as user wants
*If you make any changes to these settings, the Color Temperature mode is automatically switched to User.
RED
C OL OR
C OL OR T EM P
For adjusting the RED color as user wants.
U SER
R ED
48
GREEN
GR EEN
45
For adjusting the GREEN color as user wants.
BLUE
48
BLUE
For adjusting the BLUE color as user wants.
1920x1200 60H z
HDMI
24/31
S243X / S243A
Multi Function 2D/3D Wide Monitor
•• FUNCTION
PC ANALOG, DVI, COMPONENT MODE and HDMI MODE
INPUT SELECT
F U N C T ION
I N PU T SEL EC T
HDMI
A SPEC T R AT I O
16:10
DCR
OF F
RTC
ON
D VI TO H D M I A U D I O
OF F
3D
OF F
VI R T U A L 3D ST EP
1 2 3
1920x1200 60H z
To switch between current source and other
input source. (VGA/ COMPONENT/ DVI/ HDMI)
ASPECT RATIO
If you choose ASPECT RATIO on the OSD menu,
you can adjust the following.
HDMI
- 16:10(Full); Shows full screen regardless of screen size.
- 16: 9; Displays image at 16:9 ratio.
- 4:3; Displays image at 4:3 ratio.
- 1:1; Displays image according to actual input pixels.
* 1900 x 1200 mode displays image to only 16:10 ratio. 1600 x 1200 mode does not support image of 16:9 ratio.
* When DCR function is set to On, BRIGHTNESS menu cannot be activated. You can control DCR function only when
setting 16:10 aspect ratio.
DCR (Dynamic Contrast Ratio)
To increase contrast ratio by on and off.
RTC (Response Time compensation)
To control response time by on and off.
DVI TO HDMI AUDIO (Only HDMI mode)
To enable audio of your monitor when using the DVI to HDMI cable connection.
3D
Press
+/ –
buttons to set to “Virtual 3D, Side by Side or Off.
VIRTUAL 3D STEP
Stretch or reduce the distance between objects in virtual 3D mode. Adjust with – or +
button.
25/31
S243X / S243A
Multi Function 2D/3D Wide Monitor
RECALL
•• OSD
Recall the saved initial data.
OSD
R EC A L L
H . POSI T I ON
50
V. POSI T I ON
50
T I M ER
30SEC
T R A N SPA R EN T
To adjust horizontal position of OSD on the
screen.
V.POSITION
0 1 2 3 4 5
1920x1200 60H z
H.POSITION
VGA
To adjust vertical position of OSD on the
screen.
TIMER
To adjust OSD Display time on the screen.
TRANSPARENT
To adjust the transparency of OSD window.
•• LANGUAGE
LANGUAGE
LANGUAGE
EN GL I SH
ESPA Ñ OL
D EU T SC H
POR T U GÊS
You can select the language in which
adjustment menus are displayed.
The following languages are available.
FRANçAIS
한글
ITLAIANO
曰 本 語
DUTCH
D A N SK
SVEN SK A
POL A N D
SU OM I
C Z EC H R EPU L I C
1920x1200 60Hz
English, Spanish, German, Portuguese, French, Korean,
Italian, Japanese, Dutch, Danish, Swedish, Polish, Finnish,
Czech.
VGA
26/31
S243X / S243A
Multi Function 2D/3D Wide Monitor
10. Display power
management
If the power management function of your computer is enabled, your monitor
turns on and off automatically. You can control power management features
from your computer.
Your computer may have power management features which enable the computer or
monitor to enter a power saving mode when the system is idle. You can reactivate the
system by pressing any key or moving the mouse.
Reducing power
consumption
Mode
LED
Power consumption
Normal
Blue
55W(Typ)
Off
Not illuminated
VESA DPMS
RED(Orange)
≤ 0.5W(Typ)
≤ 0.5W(Typ)
Unplugged
Not illuminated
0W
The power button does not disconnect the monitor from the mains.
The only way to isolate the monitor completely from the mains supply
is to unplug the mains cable.
27/31
S243X / S243A
Multi Function 2D/3D Wide Monitor
11. Troubleshooting
If your monitor is not functioning properly, you may be able to solve the
problem by following the suggestions below :
Problem
Blank screen
Possible solution
If the power LED is not lit, push the Soft power switch or
check the AC cord to turn the monitor on. If the display unit
is powered through the computer, check that the computer is
switched on.
The display unit might be in standby mode. Push one of the
keyboard keys. Check that the keyboard is properly connected
to the computer.
Check that the signal cable connector is properly connected
and that the connection pins are not bent or damaged. If the
connector is loose, tighten the connector’s screws.
Check that the power cable is correctly connected to the display
unitand to the power outlet.
Error
message:Video
mode not
supported
Check the resolution and the frequency on the video port of
your computer.
The display does
not enter power
management
mode
The video signal from the computer does not comply with VESA
DPMS standard. Either the computer or the graphics adapter is
not using the VESA DPMS power management function.
Compare these values with the data in the Preset Timing Table.
28/31
S243X / S243A
Multi Function 2D/3D Wide Monitor
Problem
Possible solution
Color defects
Check that the signal cable connector is properly connected and
that the connection pins are not bent or damaged. Try another
color temperature.
Size, position,
shape or qualit
unsatisfactory
Adjust the picture characteristics as described in the section
OSD Adjustment(4-3).
Duplicated
images
A problem with your graphics adapter or display unit. Contact
your service representative.
Image is not
stable
Check that the display resolution and frequency from your PC
or graphic adapter is an available mode for your monitor.In
your PC, you can check through Control panel, Display, Settings.
If the setting is not correct, use your computer utility program
to change the display settings.
Message :
No signal
Check that the signal cable connector is properly connected
and that the connection pins are not bent or damaged. If the
connector is loose, tighten the connector’s screws. Check that
the computer is switched on.
The power LED
is a red color
The system entered a power saving mode. You can reactivate
the system by pressing any key or moving the mouse.
29/31
S243X / S243A
Multi Function 2D/3D Wide Monitor
Contacting service
If the above troubleshooting hints do not help you find a solution to the
problem, contact an authorized service agent. If the monitor is sent for
service, use the original package if possible.
Unplug the display unit from the power outlet and contact a service agent when:
•• The monitor does not operate normally according to the operating instructions.
•• The monitor exhibits a distinct change in performance.
•• The monitor has been dropped or the cabinet has been damaged.
•• The monitor has been exposed to rain, water or liquid has been spilled onto the
monitor.
30/31
S243X / S243A
Multi Function 2D/3D Wide Monitor
12. Specifications
LCD
24” viewable, Diagonal, Pixel pitch 0.270mm, A-si TFT
Display area
518.4(H) X 324(V), 24” Diagonal
Number of color
16.7 million colors ( 6bit Hi FRC )
Input signals
Frequency rate
15pin D-sub / DVI-D / Component / HDMI
Horizontal : 30.0 to 80.0KHz, Vertical : 56 to 75Hz
Maximum bandwidth
162MHz
Maximum resolution
1920 X 1200 @ 60Hz
Recommended resolution 1920 X 1200 @ 60Hz
Input voltage
100-240V, 2.0A
Power consumption
50W (Typ.)
Power management
VESA DPMS
Plug & Play
VESA DDC 1/2B
OSD menu
BRIGHTNESS, CONTRAST, H/V POSITION, PHASE, CLOCK, AUTO
ADJUST, COLOR TEMPERATURE, AUTO COLOR, INPUT SELECT,
ASPECT RATIO, DCR, RTC, RECALL, OSD H/V POSITION, TIMER,
TRANSPARENT, LANGUAGE
Headphone
2ch X 3watts / Headphone Jack
VESA FPMPMI
Ergonomics,
Safety and EMC
Operating Temperature
Weights
Dimensions (W X H X D mm)
100mm X100mm screw mounting
Energystar
cTUVus, TUV-GS, CB, FCC, CE, VCCI, GOST
5 ~ 40°C
9.9Kg unpacked, 13.4Kg packed
579 X 455 X 240mm
• Specification is subject to change without notice.
• HYUNDAI IT CORP. specification on “dead pixel” of LCD Panel applies to ISO 13406-2 Standard.
31/31

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : Yes
XMP Toolkit                     : Adobe XMP Core 4.1-c037 46.282696, Mon Apr 02 2007 18:36:56
Instance ID                     : uuid:8f796a5a-3e4a-5b4e-9a2c-e469c98800b7
Original Document ID            : adobe:docid:indd:d02a3e97-338b-11de-accc-9cde5b7acade
Document ID                     : adobe:docid:indd:3af2ad87-a30d-11e0-b24a-9a77e6e87eb3
Rendition Class                 : proof:pdf
Derived From Instance ID        : a924c6a0-2fd0-11de-ac26-d80f8d62104f
Derived From Document ID        : adobe:docid:indd:8d83c5c9-2a42-11de-8838-f2aacb1caa48
History Action                  : saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved
History Instance ID             : xmp.iid:0180117407206811ACAFA63D8147F3D4, xmp.iid:0280117407206811ACAFA63D8147F3D4, xmp.iid:0380117407206811ACAFA63D8147F3D4, xmp.iid:0580117407206811ACAFA63D8147F3D4, xmp.iid:0680117407206811ACAFA63D8147F3D4, xmp.iid:0780117407206811ACAFA63D8147F3D4, xmp.iid:0880117407206811ACAFA63D8147F3D4, xmp.iid:0980117407206811ACAFA63D8147F3D4, xmp.iid:0A80117407206811ACAFA63D8147F3D4, xmp.iid:5203C42609206811ACAFA63D8147F3D4, xmp.iid:5303C42609206811ACAFA63D8147F3D4, xmp.iid:5403C42609206811ACAFA63D8147F3D4, xmp.iid:5503C42609206811ACAFA63D8147F3D4, xmp.iid:5603C42609206811ACAFA63D8147F3D4, xmp.iid:5703C42609206811ACAFA63D8147F3D4, xmp.iid:5803C42609206811ACAFA63D8147F3D4, xmp.iid:5903C42609206811ACAFA63D8147F3D4, xmp.iid:5A03C42609206811ACAFA63D8147F3D4, xmp.iid:5B03C42609206811ACAFA63D8147F3D4, xmp.iid:5C03C42609206811ACAFA63D8147F3D4, xmp.iid:C0349D3F0E206811ACAFA63D8147F3D4, xmp.iid:C1349D3F0E206811ACAFA63D8147F3D4, xmp.iid:C2349D3F0E206811ACAFA63D8147F3D4, xmp.iid:C3349D3F0E206811ACAFA63D8147F3D4, xmp.iid:C4349D3F0E206811ACAFA63D8147F3D4, xmp.iid:C5349D3F0E206811ACAFA63D8147F3D4, xmp.iid:C6349D3F0E206811ACAFA63D8147F3D4, xmp.iid:C7349D3F0E206811ACAFA63D8147F3D4, xmp.iid:C8349D3F0E206811ACAFA63D8147F3D4, xmp.iid:C9349D3F0E206811ACAFA63D8147F3D4, xmp.iid:CA349D3F0E206811ACAFA63D8147F3D4, xmp.iid:46BEC62D0F206811ACAFA63D8147F3D4, xmp.iid:47BEC62D0F206811ACAFA63D8147F3D4, xmp.iid:48BEC62D0F206811ACAFA63D8147F3D4, xmp.iid:49BEC62D0F206811ACAFA63D8147F3D4, xmp.iid:4ABEC62D0F206811ACAFA63D8147F3D4, xmp.iid:4BBEC62D0F206811ACAFA63D8147F3D4, xmp.iid:4CBEC62D0F206811ACAFA63D8147F3D4, xmp.iid:4DBEC62D0F206811ACAFA63D8147F3D4, xmp.iid:4EBEC62D0F206811ACAFA63D8147F3D4, xmp.iid:4FBEC62D0F206811ACAFA63D8147F3D4, xmp.iid:50BEC62D0F206811ACAFA63D8147F3D4, xmp.iid:408AE57D11206811ACAFA63D8147F3D4, xmp.iid:418AE57D11206811ACAFA63D8147F3D4, xmp.iid:428AE57D11206811ACAFA63D8147F3D4, xmp.iid:438AE57D11206811ACAFA63D8147F3D4, xmp.iid:448AE57D11206811ACAFA63D8147F3D4, xmp.iid:458AE57D11206811ACAFA63D8147F3D4, xmp.iid:468AE57D11206811ACAFA63D8147F3D4, xmp.iid:478AE57D11206811ACAFA63D8147F3D4, xmp.iid:488AE57D11206811ACAFA63D8147F3D4, xmp.iid:498AE57D11206811ACAFA63D8147F3D4, xmp.iid:4A8AE57D11206811ACAFA63D8147F3D4, xmp.iid:687FCBE31B206811ACAFA63D8147F3D4, xmp.iid:697FCBE31B206811ACAFA63D8147F3D4, xmp.iid:6A7FCBE31B206811ACAFA63D8147F3D4, xmp.iid:6B7FCBE31B206811ACAFA63D8147F3D4, xmp.iid:6D7FCBE31B206811ACAFA63D8147F3D4, xmp.iid:6E7FCBE31B206811ACAFA63D8147F3D4, xmp.iid:6F7FCBE31B206811ACAFA63D8147F3D4, xmp.iid:707FCBE31B206811ACAFA63D8147F3D4, xmp.iid:717FCBE31B206811ACAFA63D8147F3D4, xmp.iid:727FCBE31B206811ACAFA63D8147F3D4, xmp.iid:FE47BD6A21206811ACAFA63D8147F3D4, xmp.iid:FF47BD6A21206811ACAFA63D8147F3D4, xmp.iid:0048BD6A21206811ACAFA63D8147F3D4, xmp.iid:0148BD6A21206811ACAFA63D8147F3D4, xmp.iid:0248BD6A21206811ACAFA63D8147F3D4, xmp.iid:0348BD6A21206811ACAFA63D8147F3D4, xmp.iid:0448BD6A21206811ACAFA63D8147F3D4, xmp.iid:0548BD6A21206811ACAFA63D8147F3D4, xmp.iid:0ED6698628206811ACAFA63D8147F3D4, xmp.iid:10D6698628206811ACAFA63D8147F3D4, xmp.iid:11D6698628206811ACAFA63D8147F3D4, xmp.iid:12D6698628206811ACAFA63D8147F3D4, xmp.iid:13D6698628206811ACAFA63D8147F3D4, xmp.iid:14D6698628206811ACAFA63D8147F3D4, xmp.iid:94C0721F30206811ACAFA63D8147F3D4, xmp.iid:95C0721F30206811ACAFA63D8147F3D4, xmp.iid:96C0721F30206811ACAFA63D8147F3D4, xmp.iid:98C0721F30206811ACAFA63D8147F3D4, xmp.iid:9BC0721F30206811ACAFA63D8147F3D4, xmp.iid:9CC0721F30206811ACAFA63D8147F3D4, xmp.iid:F77F117407206811871F8B940C65B33F, xmp.iid:FC7F117407206811871F8B940C65B33F, xmp.iid:FD7F117407206811871F8B940C65B33F, xmp.iid:FE7F117407206811871F8B940C65B33F, xmp.iid:0080117407206811871F8B940C65B33F, xmp.iid:987E7F9F09206811871F8B940C65B33F, xmp.iid:9B7E7F9F09206811871F8B940C65B33F, xmp.iid:9C7E7F9F09206811871F8B940C65B33F, xmp.iid:9D7E7F9F09206811871F8B940C65B33F, xmp.iid:9E7E7F9F09206811871F8B940C65B33F, xmp.iid:A07E7F9F09206811871F8B940C65B33F, xmp.iid:A17E7F9F09206811871F8B940C65B33F, xmp.iid:68D8B0D71B206811871F8B940C65B33F, xmp.iid:68A98E460E20681192B0DCF146C9D58A, xmp.iid:6BA98E460E20681192B0DCF146C9D58A, xmp.iid:7A99D8A61020681192B0DCF146C9D58A, xmp.iid:7F99D8A61020681192B0DCF146C9D58A, xmp.iid:8299D8A61020681192B0DCF146C9D58A, xmp.iid:CEA2311A1F20681192B0DCF146C9D58A, xmp.iid:CFA2311A1F20681192B0DCF146C9D58A, xmp.iid:0649A5A79D20681192B0DCF146C9D58A, xmp.iid:14CFD3EF9F20681192B0DCF146C9D58A, xmp.iid:F77F117407206811ACAFAAC51C331601, xmp.iid:F87F117407206811ACAFAAC51C331601, xmp.iid:F77F117407206811871FEC84E96746B6
History When                    : 2010:02:08 17:33:46+09:00, 2010:02:08 17:33:46+09:00, 2010:02:08 17:37:12+09:00, 2010:02:08 17:40:20+09:00, 2010:02:08 17:40:32+09:00, 2010:02:08 17:40:38+09:00, 2010:02:08 17:40:44+09:00, 2010:02:08 17:41:59+09:00, 2010:02:08 17:42:35+09:00, 2010:02:08 17:45:56+09:00, 2010:02:08 17:47:05+09:00, 2010:02:08 17:53:01+09:00, 2010:02:08 17:53:18+09:00, 2010:02:08 18:01:45+09:00, 2010:02:08 18:04:35+09:00, 2010:02:08 18:08:53+09:00, 2010:02:08 18:14:12+09:00, 2010:02:08 18:16:08+09:00, 2010:02:08 18:16:22+09:00, 2010:02:08 18:22:10+09:00, 2010:02:08 18:22:25+09:00, 2010:02:08 18:22:34+09:00, 2010:02:08 18:25:14+09:00, 2010:02:08 18:25:26+09:00, 2010:02:08 18:25:58+09:00, 2010:02:08 18:26:13+09:00, 2010:02:08 18:26:20+09:00, 2010:02:08 18:26:26+09:00, 2010:02:08 18:26:32+09:00, 2010:02:08 18:27:43+09:00, 2010:02:08 18:28:40+09:00, 2010:02:08 18:29:04+09:00, 2010:02:08 18:29:08+09:00, 2010:02:08 18:29:15+09:00, 2010:02:08 18:30:03+09:00, 2010:02:08 18:30:23+09:00, 2010:02:08 18:30:57+09:00, 2010:02:08 18:32:41+09:00, 2010:02:08 18:33:09+09:00, 2010:02:08 18:38:37+09:00, 2010:02:08 18:43:28+09:00, 2010:02:08 18:44:23+09:00, 2010:02:08 18:45:38+09:00, 2010:02:08 18:46:18+09:00, 2010:02:08 18:48:12+09:00, 2010:02:08 19:46:30+09:00, 2010:02:08 19:48:13+09:00, 2010:02:08 19:50:30+09:00, 2010:02:08 19:51:25+09:00, 2010:02:08 19:52:39+09:00, 2010:02:08 19:54:15+09:00, 2010:02:08 19:57:53+09:00, 2010:02:08 19:59:18+09:00, 2010:02:08 20:00:04+09:00, 2010:02:08 20:00:40+09:00, 2010:02:08 20:01:09+09:00, 2010:02:08 20:01:54+09:00, 2010:02:08 20:02:49+09:00, 2010:02:08 20:04:46+09:00, 2010:02:08 20:36:28+09:00, 2010:02:08 20:38:28+09:00, 2010:02:08 20:38:38+09:00, 2010:02:08 20:38:47+09:00, 2010:02:08 20:39:38+09:00, 2010:02:08 20:42:43+09:00, 2010:02:08 20:43:10+09:00, 2010:02:09 08:35:53+09:00, 2010:02:09 08:36:05+09:00, 2010:02:09 08:36:17+09:00, 2010:02:09 08:39:10+09:00, 2010:02:09 08:39:51+09:00, 2010:02:09 09:20:59+09:00, 2010:02:09 10:00:16+09:00, 2010:02:09 10:02:18+09:00, 2010:02:09 10:04:42+09:00, 2010:02:09 10:13:09+09:00, 2010:02:09 10:13:28+09:00, 2010:02:09 10:13:58+09:00, 2010:02:09 10:15:33+09:00, 2010:02:09 10:21:30+09:00, 2010:02:09 10:22:44+09:00, 2010:02:09 10:23:56+09:00, 2010:02:09 10:25:18+09:00, 2010:02:09 13:10:13+09:00, 2010:02:09 13:11:58+09:00, 2010:02:09 13:12:35+09:00, 2010:02:09 13:17:11+09:00, 2010:02:09 13:25:24+09:00, 2010:02:09 13:25:45+09:00, 2010:02:09 13:29:08+09:00, 2010:02:09 13:29:50+09:00, 2010:02:09 13:30:21+09:00, 2010:02:09 13:31:01+09:00, 2010:02:09 14:50:45+09:00, 2010:02:09 15:35:32+09:00, 2010:02:09 15:36:11+09:00, 2010:02:09 16:38:16+09:00, 2010:02:09 16:41:39+09:00, 2010:02:09 16:49:20+09:00, 2010:02:09 16:52:08+09:00, 2010:02:09 16:54:22+09:00, 2010:02:09 18:35:01+09:00, 2010:02:10 09:37:32+09:00, 2010:02:10 09:38:42+09:00, 2010:02:10 10:54:38+09:00, 2010:02:10 17:47:39+09:00, 2010:02:10 17:48:13+09:00, 2010:02:11 09:10:23+09:00
History Software Agent          : Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0
History Changed                 : /, /metadata, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /
Manifest Link Form              : ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream
Manifest Placed X Resolution    : 300.00, 72.00, 72.00, 96.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00
Manifest Placed Y Resolution    : 300.00, 72.00, 72.00, 96.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00
Manifest Placed Resolution Unit : Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches
Manifest Reference Instance ID  : uuid:5C2A323F53E111DDACAADF7BBAED33E8, uuid:af784ca0-1718-4276-a048-8a2fac5e71c0, uuid:7F06ABA1D1CFDD11B2A9BDD6A91341BD, xmp.iid:F87F1174072068119457FC4E54636841, uuid:1015C6742FCEDD11A21FFF7D3F038FBF, uuid:1215C6742FCEDD11A21FFF7D3F038FBF, uuid:1415C6742FCEDD11A21FFF7D3F038FBF, uuid:E503A81E30CEDD11A21FFF7D3F038FBF, uuid:E703A81E30CEDD11A21FFF7D3F038FBF, uuid:E903A81E30CEDD11A21FFF7D3F038FBF, uuid:9F61438231CEDD11A21FFF7D3F038FBF, uuid:9F61438231CEDD11A21FFF7D3F038FBF, uuid:D1C4D02931CEDD11A21FFF7D3F038FBF, uuid:D3C4D02931CEDD11A21FFF7D3F038FBF, uuid:D5C4D02931CEDD11A21FFF7D3F038FBF, uuid:D7C4D02931CEDD11A21FFF7D3F038FBF, uuid:D9C4D02931CEDD11A21FFF7D3F038FBF, uuid:9A61438231CEDD11A21FFF7D3F038FBF, uuid:9C61438231CEDD11A21FFF7D3F038FBF, uuid:9F61438231CEDD11A21FFF7D3F038FBF, uuid:a63f9d1d-cf09-574a-8067-d921719d8d0e, uuid:9F61438231CEDD11A21FFF7D3F038FBF, uuid:0f80694c-bd63-7a4c-9e52-c127e785dc18, uuid:9F61438231CEDD11A21FFF7D3F038FBF, uuid:8F08225E442ADE118F9FCA6FBB7C390A, uuid:C0F43E3232CEDD11A21FFF7D3F038FBF, uuid:9F61438231CEDD11A21FFF7D3F038FBF, uuid:99F10A0B502DDE11B513A830AB4CDE6E, uuid:AA895869572ADE118F9FCA6FBB7C390A, uuid:015233D8CECFDD11A88AE70BC802E33A, uuid:B6091BD1D72EDE119835C8BDA89B8597, uuid:B1895869572ADE118F9FCA6FBB7C390A, uuid:A2BB7B34652ADE118F9FCA6FBB7C390A, uuid:B1895869572ADE118F9FCA6FBB7C390A, uuid:A2BB7B34652ADE118F9FCA6FBB7C390A, uuid:ACBB7B34652ADE118F9FCA6FBB7C390A, uuid:AABB7B34652ADE118F9FCA6FBB7C390A, uuid:021152d1-4924-ee46-9fb9-d81c4ffd7eb1, uuid:021152d1-4924-ee46-9fb9-d81c4ffd7eb1, uuid:021152d1-4924-ee46-9fb9-d81c4ffd7eb1, uuid:021152d1-4924-ee46-9fb9-d81c4ffd7eb1, uuid:A80B474D6B2ADE118F9FCA6FBB7C390A, uuid:A80B474D6B2ADE118F9FCA6FBB7C390A, uuid:A80B474D6B2ADE118F9FCA6FBB7C390A, uuid:AA0B474D6B2ADE118F9FCA6FBB7C390A, uuid:AA0B474D6B2ADE118F9FCA6FBB7C390A, uuid:AC0B474D6B2ADE118F9FCA6FBB7C390A, uuid:AE0B474D6B2ADE118F9FCA6FBB7C390A, uuid:E5B2561D812ADE118F9FCA6FBB7C390A, uuid:9F61438231CEDD11A21FFF7D3F038FBF
Manifest Reference Document ID  : adobe:docid:photoshop:84a88b30-2c7b-11dc-8f66-dd770a43273e, uuid:DF9A2CBB140311DEB005C1BE76C968B6, uuid:7E06ABA1D1CFDD11B2A9BDD6A91341BD, xmp.did:F77F1174072068119457FC4E54636841, uuid:0F15C6742FCEDD11A21FFF7D3F038FBF, uuid:1115C6742FCEDD11A21FFF7D3F038FBF, uuid:1315C6742FCEDD11A21FFF7D3F038FBF, uuid:E403A81E30CEDD11A21FFF7D3F038FBF, uuid:E603A81E30CEDD11A21FFF7D3F038FBF, uuid:E803A81E30CEDD11A21FFF7D3F038FBF, uuid:9E61438231CEDD11A21FFF7D3F038FBF, uuid:9E61438231CEDD11A21FFF7D3F038FBF, uuid:D0C4D02931CEDD11A21FFF7D3F038FBF, uuid:D2C4D02931CEDD11A21FFF7D3F038FBF, uuid:D4C4D02931CEDD11A21FFF7D3F038FBF, uuid:D6C4D02931CEDD11A21FFF7D3F038FBF, uuid:D8C4D02931CEDD11A21FFF7D3F038FBF, uuid:DAC4D02931CEDD11A21FFF7D3F038FBF, uuid:9B61438231CEDD11A21FFF7D3F038FBF, uuid:9E61438231CEDD11A21FFF7D3F038FBF, uuid:b5cd0a63-8b76-8e49-97d5-062ae78c2bc4, uuid:9E61438231CEDD11A21FFF7D3F038FBF, xmp.did:F77F11740720681195FEEDA3FEFCF2A3, uuid:9E61438231CEDD11A21FFF7D3F038FBF, uuid:8E08225E442ADE118F9FCA6FBB7C390A, uuid:BFF43E3232CEDD11A21FFF7D3F038FBF, uuid:9E61438231CEDD11A21FFF7D3F038FBF, uuid:9008225E442ADE118F9FCA6FBB7C390A, uuid:A8895869572ADE118F9FCA6FBB7C390A, uuid:2952781533CEDD11A21FFF7D3F038FBF, uuid:AB895869572ADE118F9FCA6FBB7C390A, uuid:B0895869572ADE118F9FCA6FBB7C390A, uuid:B2895869572ADE118F9FCA6FBB7C390A, uuid:B0895869572ADE118F9FCA6FBB7C390A, uuid:B2895869572ADE118F9FCA6FBB7C390A, uuid:ABBB7B34652ADE118F9FCA6FBB7C390A, uuid:A9BB7B34652ADE118F9FCA6FBB7C390A, xmp.did:F77F11740720681195FEE65864981EE9, xmp.did:F77F11740720681195FEE65864981EE9, xmp.did:F77F11740720681195FEE65864981EE9, xmp.did:F77F11740720681195FEE65864981EE9, uuid:A60B474D6B2ADE118F9FCA6FBB7C390A, uuid:A60B474D6B2ADE118F9FCA6FBB7C390A, uuid:A60B474D6B2ADE118F9FCA6FBB7C390A, uuid:A90B474D6B2ADE118F9FCA6FBB7C390A, uuid:A90B474D6B2ADE118F9FCA6FBB7C390A, uuid:AB0B474D6B2ADE118F9FCA6FBB7C390A, uuid:AD0B474D6B2ADE118F9FCA6FBB7C390A, uuid:E4B2561D812ADE118F9FCA6FBB7C390A, uuid:9E61438231CEDD11A21FFF7D3F038FBF
Create Date                     : 2011:06:29 15:38:25+09:00
Modify Date                     : 2011:06:29 15:38:42+09:00
Metadata Date                   : 2011:06:29 15:38:42+09:00
Creator Tool                    : Adobe InDesign CS3 (5.0.4)
Thumbnail Format                : JPEG
Thumbnail Width                 : 256
Thumbnail Height                : 256
Thumbnail Image                 : (Binary data 10679 bytes, use -b option to extract)
Doc Change Count                : 1186
Format                          : application/pdf
Producer                        : Adobe PDF Library 8.0
Trapped                         : False
Page Count                      : 35
Creator                         : Adobe InDesign CS3 (5.0.4)

EXIF Metadata provided by EXIF.tools