Hyundai IBT L24DPFAL0 LCD MONITOR User Manual
Hyundai IBT Corp. LCD MONITOR
user manual
24” Wide LED Monitor User Manual P247DPU P247DP Precautions Precautions Warning The following information will help you avoid the risk of electric shock, serious injury or death. Power cord AC outlet Plug the power cord into a properly grounded outlet. There is the risk of electric shock. Do not allow any object or liquid to enter inside the monitor. There is the risk of electric shock, fire or damage to the monitor. Do not attempt to disassemble, fix or modify the monitor. There is the risk of electric shock or fire. If you hear a noise or smell smoke from the computer or adaptor, unplug the power cord immediately, and call the service center. There is the risk of electric shock or fire. Do not overload an electrical outlet with too many devices. There is the risk of fire. Do not unplug from the outlet by pulling the power cord or when your hands are wet. There is the risk of electric shock or fire. Do not bend the power cord excessively nor place heavy objects on it. Keep children and pets away from the power cord as they may damage the power cord. There is the risk of electric shock or fire. Do not use a damaged power cord or plug. Make sure the plug fits snugly into the outlet. There is the risk of electric shock or fire. Use a proper voltage/current level indicated Do not clean the LCD with abrasive chemicals. There is the risk of damage to the LCD. Do not scratch and damage the LCD with sharp objects. Do not expose the monitor to the direct sun light. Keep the monitor away from high temperature, humidity, and dust. Operating environment =10~40degrees Celsius Operating environment =20~80relative humidity. Do not block the fan louvers. There is the risk of fire or damage to the monitor. Keep the monitor away from objects and electrical appliances that may generate electromagnetic fields. Place the monitor on a flat, stable surface. The monitor may fall and there is the risk of damage or injury. Unplug the power cord when the monitor is not in use for a long period of time. The socket - outlet shall be installed near the equipment and shall be easily accessible. Caution The following information will help you avoid the risk of minor or moderate injury or damage to the monitor. 7 Monitor Stand Power Cord 15-pin Dsub Cable * Push the hook until hanging Install CD / Quick guide 24pin DVI Cable Audio Cable AUDIO IN AUDIO Cable *2 VGA 15-pin D-Sub Signal Cable DVI DVI-D Cable DISPLAY PORT DP Cable *2 : For Audio Model Only. USB Cable 1 : For Audio Model Only. 2 : For USB Model Only. “UP, DOWN” DOWN Volume “MENU” “UP, DOWN” “UP, DOWN” UP * VGA Only SCALE Change Ratio (Wide or Normal) SOURCE Change Input Signal PICTURE H.POSITION V.POSITION *1 *1 *1 *1 AUTO ADJUST COLOR COLOR TEMP Select the most comfortable color tone to your eyes STANDARD -> REDDISH -> BLUISH -> USER * STANDARD : for general color tone. * REDDISH : for reddish color with warm tone. * BLUISH : for bluish color with cool tone. * USER : for adjusting degree of RGB as user wants LCD LCD FUNCTION *1 RED,GREEN,BLUE AUTO COLOR For adjusting the each color as user wants. Automatically set optimum screen. *1 INPUT SELECT To switch current and other input source. ASPECT RATIO PICT UR E OSD BRIGHT NE S S 90 CONT RAS T 60 H.PO S ITI ON 50 V.POS I TION 50 P HAS E 76 CLOCK 50 AUTO ADJ U S T 1920x1 2 0 0 60H z V GA DCR Turn on / off DCR Function. RECALL Recall the saved initial data. H.POSITION V.POSITION TIMER LANGUGAE Adjusts OSD display time on the screen. Select OSD language.( 5 langauges ) *1 : Not available in DVI and DP mode . 35.2 kHz 56 Hz 37.8 kHz 60 Hz 1024 x 768 48.3 kHz 60 Hz 1280 x 960 60.0 kHz 60 Hz 1280 x 1024 63.9 kHz 60 Hz 1440 x 900 55.9 kHz 60 Hz 1680 x 1050 64.7 kHz 60 Hz 1920 x 1080 67.5 kHz 60 Hz 800 x 600 480p 50/60 576p 50/60 720p 50/60 1080p 50/60 DVI(HDCP) Under 28W Less then 0.5W 24” Wide Specification 531.36mm(H) x 298.89mm(V) (24 inch) 0.276mm(H) x 0.276mm(V) 1920 x 1080@60Hz 170º/170º(H/V) 16.7M 250 DVI-D, AUDIO*1 DISPLAY PORT USB *2 < 28W (Typ.) < 0.5W AC:100V-240V 50/60Hz, 2.0A 1Wx2 *1 1 : For Audio Model Only. 2 : For U S B Model Only. 10 11 FCC compliance Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: ㆍReorient or relocate the receiving antenna. ㆍIncrease the separation between the equipment and receiver. ㆍConnect the equipment into an outlet on a circuit different from that to which the receiver is connected. ㆍConsult the dealer or an experienced radio/TV technician for help. Change or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment under FCC rules. 12
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.7 Linearized : Yes XMP Toolkit : Adobe XMP Core 4.0-c321 44.398116, Tue Aug 04 2009 14:24:39 Create Date : 2012:08:06 11:19:56-07:00 Modify Date : 2012:08:06 11:20:25-07:00 Metadata Date : 2012:08:06 11:20:25-07:00 Producer : iTextSharp 5.0.4 (c) 1T3XT BVBA Format : application/pdf Document ID : uuid:605f7881-9450-448d-ab2d-494932023400 Instance ID : uuid:c9c12918-3543-4042-bd88-db4d61acc74c Page Count : 7EXIF Metadata provided by EXIF.tools