Hyundai IBT L30DPKLP0 MONITOR User Manual 002
Hyundai IBT Corp. MONITOR 002
User Manual
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 2183429 |
| Application ID | JHrL+rDPKPh6tDqKKaE0Tg== |
| Document Description | User Manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 221.36kB (2766943 bits) |
| Date Submitted | 2014-02-04 00:00:00 |
| Date Available | 2014-02-04 00:00:00 |
| Creation Date | 2017-10-24 02:10:10 |
| Producing Software | GPL Ghostscript 9.18 |
| Document Lastmod | 2017-10-24 02:10:10 |
| Document Title | 002 |
| Document Creator | Adobe Illustrator CS2 |
| Document Author: | jwmun |
30” WQXGA Wide LED Monitor User Manual Precautions Precautions Warning The following information will help you avoid the risk of electric shock, serious injury or death. Power cord AC outlet Plug the power cord into a properly grounded outlet. There is the risk of electric shock. Do not allow any object or liquid to enter inside the monitor. There is the risk of electric shock, fire or damage to the monitor. Do not attempt to disassemble, fix or modify the monitor. There is the risk of electric shock or fire. The socket-outlet shall be installed near the equipment and shall be easily accessible. If you hear a noise or smell smoke from the computer or adaptor, unplug the power cord immediately, and call the service center. There is the risk of electric shock or fire. Do not overload an electrical outlet with too many devices. There is the risk of fire. Do not unplug from the outlet by pulling the power cord or when your hands are wet. There is the risk of electric shock or fire. Do not bend the power cord excessively nor place heavy objects on it. Keep children and pets away from the power cord as they may damage the power cord. There is the risk of electric shock or fire. Do not use a damaged power cord or plug. Make sure the plug fits snugly into the outlet. There is the risk of electric shock or fire. Use a proper voltage/current level indicated Do not clean the LCD with abrasive chemicals. There is the risk of damage to the LCD. Do not scratch and damage the LCD with sharp objects. Do not expose the monitor to the direct sun light. Keep the monitor away from high temperature, humidity, and dust. Operating environment =10~40degrees Celsius Operating environment =20~80relative humidity. Do not block the fan louvers. There is the risk of fire or damage to the monitor. Keep the monitor away from objects and electrical appliances that may generate electromagnetic fields. Place the monitor on a flat, stable surface. The monitor may fall and there is the risk of damage or injury. Unplug the power cord when the monitor is not in use for a long period of time. Caution The following information will help you avoid the risk of minor or moderate injury or damage to the monitor. * The socket - outlet shall be installed near the equipment and shall be easily accessible. * Pour les équipements raccordés, la prise de courant doit être installée près de l'équipement et doit être facilement accessible. LCD Monitor Stand After assemble pedestal at stand body, assemble screw to driver. Adapter Jack Display Port Power Cord 15-pin D-Sub Cable DP Cable Install CD / Quick Guide Dual link DVI Cable HDMI HDMI Cable *1 *1 : For DVI, DSUB mode Only. Adapter 24-pin Dual Link DVI Cable Display port Cable HDMI Cable(More than 1.3) Audio Cable MENU Opens OSD Menu window. Cansels chosen OSD Menu setp by step, Closes OSD Menu. Decreases value of chosen icon. Volume Increases value of chosen icon. Mute Moves down icon choice bar. Automatic setting Moves up icon choice bar. Scale Chooses source and icons. Source 1. Press the “MENU” button to bring up the screen. 2. Press the " , " buttons to select the main option. 3. Press the " " button after selecting the main option. 4. Bring up the sub-menu. Use the " , " buttons to select the desired option. 5. Press the " " button after selecting the desired sub-menu option. 6. Use the " , " buttons to adjust the set value. 7. Pressing the " MENU " button Two times saves and exits the setting mode. * Pressing the " MENU " button moves back to the previous menu. Turn On/off Monitor. State lamp Indicates monitor's state. LCD on(Green) in normal state LCD flicker(RED and off) in standby mode OSD 8 800 x 600 37.8 kHz 60 Hz 1024 x 768 48.3 kHz 60 Hz 1280 x 1024 63.9 kHz 60 Hz 1920 x 1080 66.6 kHz 60 Hz 1920 x 1200 74.0 kHz 60 Hz 2560 x 1600 98.714 kHz 60 Hz 480p 50/60 576p 50/60 720p 50/60 1080p 50/60 ON Under 80 W (Max.) / Under 65 W (Typ.) OFF Less than 0.5 W DVI(HDCP) Green Flickering Red 30 WQXGA Wide 641.28mm(H) x 400.8mm(V) 0.2505mm(H) x 0.2505mm(V) 2560 x 1600@60Hz 178º / 178º (H/V) 1.07 Billion 350 6 ms 31 ~ 99KHz 56 ~ 75Hz Analong RGB, DVI , HDMI , Disply port 15Pin D-Sub, 29pin DVI, 19Pin HDMI, 20Pin Display port, Audio In *1 80W (Max), 65W (Typ) 0.5W AC : 110V~240V 50/60Hz 1.5A , DC : 24Vdc, 5A 2W x 2 *1 : For DVI, DSUB mode only. 10 11 FCC compliance Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: ㆍReorient or relocate the receiving antenna. ㆍIncrease the separation between the equipment and receiver. ㆍConnect the equipment into an outlet on a circuit different from that to which the receiver is connected. ㆍConsult the dealer or an experienced radio/TV technician for help. Change or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment under FCC rules. 12
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.6 Linearized : Yes Encryption : Standard V4.4 (128-bit) User Access : Print, Extract, Print high-res Author : jwmun Create Date : 2013:12:27 15:07:06+09:00 Modify Date : 2014:02:04 14:15:54+09:00 Has XFA : No XMP Toolkit : Adobe XMP Core 4.2.1-c041 52.342996, 2008/05/07-20:48:00 Producer : Acrobat Distiller 9.0.0 (Windows) Creator Tool : Adobe Illustrator CS2 Metadata Date : 2014:02:04 14:15:54+09:00 Thumbnail Width : 256 Thumbnail Height : 184 Thumbnail Format : JPEG Thumbnail Image : (Binary data 16135 bytes, use -b option to extract) Document ID : uuid:C2DBF0205A79DD1198D9B32C5AB38D37 Instance ID : uuid:72bd0690-3470-4fa8-8955-57141bfad505 Rendition Class : proof:pdf Derived From Instance ID : uuid:C1DBF0205A79DD1198D9B32C5AB38D37 Derived From Document ID : uuid:BD59024FE152DD11819488636BB2CBC7 Format : application/pdf Title : 002 Creator : jwmun N Pages : 1 Has Visible Transparency : False Has Visible Overprint : True Max Page Size W : 878.740234 Max Page Size H : 620.787109 Max Page Size Unit : Points Font Name : ArialMT, Arial-BoldMT Font Family : Arial, Arial Font Face : Regular, Bold Font Type : Open Type, Open Type Font Version : Version 5.10, Version 5.08 Font Composite : False, False Font File Name : arial.ttf, arialbd.ttf Plate Names : Cyan, Magenta, Yellow, Black Swatch Groups Group Name : 기본 견본 그룹 Swatch Groups Group Type : 0 Page Count : 7 For : DanielJang, Bounding Box : 0 0 879 621 Container Version : 11 Creator Version : 14 Image Height : 621 Image Width : 879 Image Size : 879x621 Megapixels : 0.546EXIF Metadata provided by EXIF.tools