Hyundai IBT L530 15-inch LCD Monitor User Manual

Download:
Mirror Download [FCC.gov]
Document ID	150661
Application ID	VniG45cu3+8CcnKJ8odbNw==
Document Description	Users Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	117.8kB (1472477 bits)
Date Submitted	2001-05-18 00:00:00
Date Available	2001-05-18 00:00:00
Creation Date	2001-04-20 11:26:03
Producing Software	Acrobat Distiller 4.0 for Macintosh
Document Lastmod	2001-04-20 12:02:41
Document Title	Users Manual

NEXT
ImageQuest L530
TF T L CD Color Monitor
User's Guide
Click
www.hyundaiQ.com
BACK
U.S.A.
U.S.FEDERAL COMMUNICATIONS COMMISSION
RADIO FREQUENCY INTERFERENCE STATEMENT
INFORMATION TO THE USER
NOTE : This equipment has been tested and found to comply with the limits for a
Class B digital device pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful
interference in a residential installation.
This equipment generates, uses, and can radiate radio frequency energy and, if
not installed and used in accordance with the instructions, may cause harmful
interference to radio communications.
However, there is no guarantee that interference will not occur in a particular
installation.
If this equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following
measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet of a circuit different from that to which
the receiver is connected.
Consult the dealer or an experienced radio/TV technician for assistance.
Changes or modification not expressly approved by the party responsible for
compliance could void the user's authority to operate the equipment.
Connecting of peripherals requires the use of grounded shielded signal cables.
NEXT
BACK
DECLARATION OF CONFORMITY
WE
ImageQuest CO., LTD.
Ami-ri Bubal-Eub Ichon-Si Kyungki-Do
467-860 KOREA
declare under our sole responsibility that the product:
Kind of equipment
COLOR MONITOR
Type-Designation
L15D0C060
to which this declaration relates is in conformity with the
following standard(s) or other normative document(s)
Safety : EN 60950 : 1992 + A1, A2, A3, A4
EMC : EN 55022 : 1998, EN 55024 : 1998
EN 61000-3-2 : 1995+A1 : 1998+A2 : 1998
EN 61000-3-3 : 1995
following the provisions of the Low Voltage Directive 73/23/EEC,
93/68/EEC and the EMC Directive 89/336/EEC.
Accredited testlaboratory:
TÜV Rheinland
Am Grauen Stein
51105 Köln
KOREA / April 19, 2001
(Place and date of issue)
HONG KI, KIM
(Name and signature of
authorized person)
NEXT
BACK
L530
15" TFT Digital LCD Monitor
NEXT
Contents
1. Introduction ...............................1/15
2. Safety Information ...................1/15
3. Installing the monitor ..............4/15
3-1. Packing List ....................................4/15
3-2. Selecting a suitable location .........5/15
3-3. Connecting the monitor ................5/15
3-4. Setting the refresh rate ................7/15
Preset Timing Table .......................8/15
4. Adjusting the picture ................9/15
4-1. Using the On Screen Display ........10/15
4-2. OSD Adjustments ........................11/15
5. Display power management ..12/15
Reducing power consumption .........12/15
6. Troubleshooting ......................13/15
7. Specifications ..........................15/15
BACK
L530
15" TFT Digital LCD Monitor
NEXT
1. Introduction
This manual contains instructions for installing and operating ImageQuest L530.
ImageQuest L530 is a highly ergonomic color display unit.
• 15" viewable XGA LCD
• Supporting full scan flicker-free picture quality
• With On Screen Display menus for user control
• 100-240V AC input voltage
• DMPM (Digital Monitor Power Management)
• VESA DDC 2B compatibility
2. Safety Information
This Monitor has been engineered and manufactured to assure your safety.
You can prevent serious electrical shock and other hazards by keeping in mind
the following:
Do not place anything wet on the monitor or the power
cord. Never cover the ventilation openings with any
material and never touch them with metallic or
inflammable materials.
Avoid operating the monitor in extreme heat,
humidity or areas affected by dust.
Temperature : 5~35°C
Humidity : 30~80RH
1/15
BACK
L530
15" TFT Digital LCD Monitor
NEXT
Be sure to turn the monitor off before plugging the
power cord into the socket. Make sure that the power
cord and the other cords are securely and rightly
connected.
Overloaded AC outlets and extension cords are
dangerous, as are frayed power cords and broken
plugs, which may cause electric shock or fire. Call
your service technician for replacement.
Do not use sharp tools such as a pin or a pencil near
the monitor, as they may scratch the LCD surface.
Do not use a solvent, such as benzene, to clean the
monitor, as it will damage the LCD surface.
2/15
L530
15" TFT Digital LCD Monitor
BACK
NEXT
Cleaning and Maintenance
•
•
•
•
•
To avoid risk of electric shock, do not disassemble the display unit cabinet. The
unit is not user-serviceable. Remember to unplug the display unit from the
power outlet before cleaning.
Do not use alcohol (methyl, ethyl or isopropyl) or any strong dissolvent. Do not
use thinner or benzene, abrasive cleaners or compressed air.
Do not wipe the screen with a cloth or sponge that could scratch the surface.
To clean your antistatic screen, use water and a special microfiber screen
cleaning tissue used in optical lens cleaning, or lightly dampen a soft, clean
cloth with water or a mild detergent.
If the instructions above do not help in removing stains, contact an authorized
service agent.
3/15
BACK
L530
15" TFT Digital LCD Monitor
3. Installing the
monitor
NEXT
The following items should be found in the packaging.
3-1. Packing List
UK
Japan
American/Canada
Europe
South Africa
Australia
Power Cord
DVI-D Cable
Compact Disc
AC/DC Power adapter
Korea
Above power cord can be changed upon different voltage areas. Please
contact your dealer if anything is missing or damaged.
Other Power Cords than the supplier one or longer than 3m can after the EMC
of the product in operating condition.
4/15
L530
15" TFT Digital LCD Monitor
3-2. Selecting a suitable
location
•
•
•
•
•
3-3. Connecting the
monitor
1.
2.
3.
4.
5.
BACK
NEXT
Place the monitor at least 30cm from other electrical or heat-emitting
equipment and allow at least 10cm on each side for ventilation.
Place the monitor in a position where no light shines directly onto or is
reflected on the screen.
To reduce eye strain, avoid installing the display unit against a bright
background such as a window.
Position the monitor so that the top of the screen is no higher than eye level.
Position the monitor directly in front of you at a comfortable reading distance
(around 45 to 90cm)
Before you start cabling your monitor, check that the
power is off on all units. To avoid any possibility of
electric shock, always connect your equipment to
properly earthed outlets.
Insert the other 24-pin DVI-D cable connector into the 24-pin DVI-D connection
on your computer and screw it down.
Plug the power cord connection to connection on the AC-DC Power adapter.
Plug the jack of the AC-DC Power adapter connection to connection on monitor.
Plug the other end of the power cord to your computer's main supply or to a
100V-240V earthed electrical outlet.
Turn on the monitor using the power switch and check that the power LED is
on. If not, repeat steps 1,2,3 and 4 or refer to the Troubleshooting section of
this guide.
5/15
BACK
L530
15" TFT Digital LCD Monitor
6.
NEXT
Turn on the power to the computer. The picture will appear within about 10
seconds. Adjust the picture to obtain optimum picture quality. See section
Adjusting the picture in this guide for more information.
6/15
BACK
L530
15" TFT Digital LCD Monitor
LED Indicator
3-4. Setting the refresh
rate
NEXT
Soft Power Switch
Follow the instructions below to set your refresh rate in Windows 98.
1.
2.
3.
4.
5.
6.
Go to the configuration window(Start-Settings-Configuration window).
Double click on the ‘Display’ icon.
Click on the ‘Settings’ tab.
Click on the ‘Advanced’ button.
Click on ‘Adapter’ and select 60Hz from the list.
Click on ‘Apply’ to accept the selected value.
7/15
BACK
L530
15" TFT Digital LCD Monitor
NEXT
Preset Timing Table
If the signal from the system doesn't equal to the preset timing mode, adjust
the mode with reference to the user guide of videocard because the screen
may not be displayed.
The recommended setting is a resolution of 1024x768 and a refresh rate of 60Hz.
No.
Resolution
*10
11
12
640 x 400
720 x 400
640 x 480
640 x 480
800 x 600
800 x 600
800 x 600
800 x 600
832 x 624
1024 x 768
1024 x 768
1024 x 768
Horizontal Frequency
Refresh rate
31.5 KHz
31.5 KHz
31.5 KHz
37.9 KHz
35.2 KHz
37.9 KHz
48.1 KHz
46.9 KHz
49.7 KHz
48.4 KHz
56.5 KHz
60.0 KHz
70 Hz
70 Hz
60 Hz
73 Hz
56 Hz
60 Hz
72 Hz
75 Hz
75 Hz
60 Hz
70 Hz
75 Hz
* Recommended primary mode.
8/15
BACK
L530
15" TFT Digital LCD Monitor
NEXT
4. Adjusting the picture
You can adjust the screen display by using the buttons located below the
screen.
1024X768
V:60.4/H:48.7
Brightness
Contrast
Hue
Flesh Tone
Misc
Recall
9/15
BACK
L530
15" TFT Digital LCD Monitor
4-1. Using the On Screen
Display
1.
Push the MENU button to call the OSD to the screen. The resolution and
frequency are displayed at the top of the menu box for your information.
2.
3.
4.
5.
6.
NEXT
The resolution is displayed only when the monitor works in the preset
mode.
Push the
or
button to choose the item you want to adjust. The selected
item is highlighted.
Push the SELECT button to adjust the highlighted item.
Use the
or
button to adjust the selection.
Push the SELECT button to return to the previous menu if you are in a
submenu.
The display unit automatically saves the new settings in 1 second after your
last adjustments and the menu disappears. You can also push the MENU button
to make the menu disappear.
10/15
L530
15" TFT Digital LCD Monitor
BACK
NEXT
4-3. OSD Adjustments
The OSD adjustments available to you are listed below.
You can play the movie
file to see how to adjust
the picture image by
clicking each icon or title
hereunder.
BRIGHTNESS
Adjust the brightness of the screen.
CONTRAST
Adjust the contrast of the screen.
HUE
Adjust the Hue of the screen image.
FLESH TONE
Adjust the Flesh tone of the screen image.
MISC
LANGUAGE
You can select the language in which adjustment menus are displayed.
The following languages are available: English, French, German,
Italian, Spanish.
OSD H. POSITION
Adjust the OSD menu’s horizontal position on the screen.
OSD V. POSITION
Adjust the OSD menu’s vertical position on the screen.
RECALL
Return to Factory adjustment condition.
Change four parameters : Brightness, Contrast, Hue, Flesh-tone
11/15
BACK
L530
15" TFT Digital LCD Monitor
5. Display power
management
Reducing power
consumption
NEXT
If the power management function of your computer is enabled, your monitor
turns on and off automatically. You can control power management features from
your computer.
Your computer may have power management features which enable the computer
or monitor to enter a power saving mode when the system is idle. You can
reactivate the system by pressing any key or moving the mouse.
Mode
LED
Normal
Green
40 W
off
Orange
5W
Unplugged
Not illuminated
0W
Power consumption
The power button does not disconnect the monitor from the mains. The only
way to isolate the monitor completely from the mains supply is to unplug the
mains cable.
12/15
BACK
L530
15" TFT Digital LCD Monitor
NEXT
6. Troubleshooting
If your monitor is not functioning properly, you may be able to solve the problem
by reading followings.
Problem
Blank screen
Possible solution
If the power LED is not lit, push the Soft power switch or check the
AC cord to turn the monitor on. If the display unit is powered
through the computer, check that the computer is switched on.
The display unit might be in standby mode. Push one of the
keyboard keys. Check that the keyboard is properly connected to
the computer.
Check that the signal cable connector is properly connected and that
the connection pins are not bent or damaged. If the connector is
loose, tighten the connector's screws.
Check that the power cable is correctly connected to the display unit
and to the power outlet.
Error message:
Video mode not
supported
Check the resolution and the frequency on the video port of your
computer.
Compare these values with the data in the Preset Timing Table.
The display does
not enter power
management
mode
The video signal from the computer does not comply with DMPM
standard. Either the computer or the graphics adapter is not using
the DMPM power management function.
13/15
BACK
L530
15" TFT Digital LCD Monitor
Problem
NEXT
Possible solution
Color defects
Check that the signal cable connector is properly connected and that
the connection pins are not bent or damaged. Try another color
temperature.
Duplicated
images
A problem with your graphics adapter or display unit. Contact your
service representative.
Image is not
stable
Check that the display resolution and frequency from your PC or
graphic adapter is an available mode for your monitor.
In your PC, you can check through Control panel, Display, Settings.
If the setting is not correct, use your computer utility program to
change the display settings.
Contacting service
If the above troubleshooting hints do not help you find a solution to the problem,
contact an authorized service agent. If the monitor is sent for service, use the
original package if possible.
Unplug the display unit from the power outlet and contact a service agent when:
•
•
•
•
The monitor does not operate normally according to the operating instructions.
The monitor exhibits a distinct change in performance.
The monitor has been dropped or the cabinet has been damaged.
The monitor has been exposed to rain, or water or liquid has been spilled onto
the monitor.
14/15
BACK
L530
15" TFT Digital LCD Monitor
7. Specifications
LCD
Brightness
Response Time
Display area
Number of color
Input signals
Frequency rate
Maximum bandwidth
Maximum resolution
Input voltage
Power consumption
Power management
Plug & Play
OSD menu
Ergonomics,
Safety and EMC
Operating Temperature
Weight
Dimensions (W X H X D mm)
15"viewable, Diagonal
Dot pitch 0.297 mm, AM-TFT
180cd/m2(Min.), 200cd/m2(Typ.)
40msec
304 X 228 mm
16,7 million colors (with dithering)
T.M.D.S Digital Sync, 24 pin DVI-D
Horizontal : 31.0 to 60.0KHz
Vertical : 56 to 75Hz
80 MHz
1024X768@75Hz
DC 12V/5V
2.0A /2.0A
40W
DMPM
VESA DDC 2B
BRIGHTNESS, CONTRAST, HUE,
FLESH TONE, MISC(LANGUAGE, OSD H./V.POSITION),
RECALL
TCO
FCC Class B, CE,
cULus, TÜV-GS, NEMKO, DEMKO, FIMKO, SEMKO
5 ~ 35O C
2.7Kg unpacked, 4.0Kg packed
367 X 353 X 188.3 mm
• Specification is subject to change without notice for performance improvement.
15/15

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.3
Linearized                      : No
Create Date                     : 2001:04:20 11:26:03
Producer                        : Acrobat Distiller 4.0 for Macintosh
Modify Date                     : 2001:04:20 12:02:41+09:00
Page Count                      : 19

EXIF Metadata provided by EXIF.tools