Hyundai IBT LT37DW000 37" LCD TV User Manual ATT E manual

Hyundai IBT Corp. 37" LCD TV ATT E manual

Users Manual

FCC ID : PJILT37DW000 HYUNDAI CALIBRATION & CERTIFICATION TECHNOLOGIES CO., LTD. SAN 136-1, AMI-RI, BUBAL-EUP, ICHEON-SI, KYOUNGKI-DO, 467-701, KOREA TEL:+82 31 639 8517 FAX:+82 31 639 8525 www.hct.co.kr Report No. : HCT-F06-0502 1/1 ATTACHMENT E. - USER’S MANUAL -
FCC InformationUser InstructionsThe Federal Communications Commission Radio Frequency Interference Statement includesthefollowing warning :NOTE : This equipment has been tested and found to comply with the limits for a Class B digitaldevicepursuant to Part 15 of the FCC Rules.These limits are designed to provide reasonable protection against harmful interference inaresidential installation. This equipment generates, uses, and can radiate radio frequency energy and,ifnot installed and used in accordance with the instructions, may cause harmful interference toradiocommunications. However, there is no guarantee that interference will not occur in aparticularinstallation.If this equipment does cause harmful interference to radio or television receptions, which canbedetermined by turning the equipment off and on, the user is encouraged to try to correcttheinterference by one or more of the following measures :• Reorient or relocate the receiving antenna.• Increase the separation between the equipment and receiver.• Connect the equipment into an outlet on a circuit different from that to which the receiver isconnected.• Consult the dealer or an experienced radio/TV technician for assistance.User InformationChanges or modifications not expressly approved by the party responsible for compliance couldvoidthe user’s authority to operate the equipment.Connecting of peripherals requires the use ofgrounded shielded signal cables.
HYUNDAI LCD TVImportant TipImage Retention Effect (Image Sticking)1. Cause : - Image Retention Effect may come from displaying a still picture in certain period of time with at acertain area continuously, as the feature of LCD panel. This is caused due to brightness degradation.Many LCD manufacturers are trying to overcome this limitation.2. Prevention- To avoid this matter, use the product after reducing brightness and contrast, especially when a stillimage is displaying for a long time. (Contrast 50/Brightness 50 - See 32 page)Once image retention occurs, use the mode that displays more motion pictures. It will help reduce thismatter.3. Solution - The temporary image sticking would decrease with displaying Full-White pattern during 10 hours.* The permanent image sticking could not take off under the latest technology.This method may be used to eliminate a temporary retained image that occurs after displaying a stillimage for a certain period of time. Since it may take several minutes to several hours to remove imagesticking, it is recommendable to display motion pictures during 2~3 minutes every hour when keepingdisplaying a still image. As image sticking is influenced by the brightness of a still image beingdisplayed and its display time, it is recommended that you reduce the brightness of the screen whendisplaying a still image for a long time. * Image Sticking does not come under the warranty.
Image Sticking PrecautionWhen watching a still Image within motion pictures andPanorama/Wide/4:3 screen1. Note : - When the central area of the screen and the screen edges are fixed, the different brightness level ofthe edges may cause image retention on the edges when watching for a long time- This phenomenon is the same matter to other LCD manufacturers. Please do not watch a still imagefor a long time.- If you watch a still image for a long time, this may damage your TV.* This matter does not come under the warranty. Panorama, Wide, 4:3 screenBox still image
HYUNDAI LCD TVFeaturesIntegrated HDTV An HDTV has a built-in ATSC digital tuner.It does not need a separate set-top box to receive over the-air DTV signal.Dual Scan/Multi-ViewingYou can program analog TV broadcasting and digital TV broadcasting automatically at the same timefor multi-viewing.A Wide Array of Screen SettingsYou can choose different screen settings depending on the type of program you are watching or thesurrounding conditions (the outside weather conditions). You can switch among Standard, and Mildoptions or you can configure the screen settings for yourself.A Wide Array of Sound SettingsYou can choose an optimal sound setting for the type of program you are watching.You can switch among custuom Standard, movies, Music, and Speech options or you can configurethe sound settings for yourself.Favorite Channel MemoryYou can memorize the channels you are watching frequently.SRS TrueSurround XTYou can enjoy dynamic and surround sound with ordinary speakers.Dolby-DigitalWhen receiving digital broadcast signal, you can enjoy dynamic and surround sound with twoordinary speakers just like Dolby 5.1.A Variety of Aspect RatiosYou can adjust the screen size at your preference.Auto On/Off FunctionThis function allows you to turn on or off your TV at the preset time.Game Prevention FunctionThis function is designed to prevent a VCR or game player from being connected to the TV.
HYUNDAI LCD TVTable of ContentsGeneral InformationSafety Precaution ................................................................5Contents of the Package .......................................................9Products Sold Separately ......................................................9Kensington Lock Anti-theft Device ......................................10How to Mount and Detach The Speakers ...........................11How to adjust the view angle ..............................................12Parts Names and Functions ................................................13Remote Control ...................................................................17Connections How to Watch Both Analog and Digital Broadcastswith a Single Antenna .........................................................19How to Watch Both Analog and Digital Broadcastswith Two Antennas .............................................................20Before Connecting the Video/Audio Connections toExternal Devices... .............................................................21How to Connect a VCR/Cable Receiver ................................22How to Connect a DTV Receiver or DVD Player ....................23How to Connect a Camcorder/Game Player .........................24How to Connect to a PC ......................................................25HDMI Connection ................................................................27How to Connect an External Visual Device ...........................29How to Use Digital Sound ....................................................30Picture SetupHow to Select the Picture Mode ..........................................31How to Set the Desired Picture ...........................................32How to Adjust the Color Temperature of the Screen ............33How to Select the Aspect Ratio ...........................................34How to Watch the PIP .........................................................36How to Set the INPUT for the Sub-Picture ...........................37How to Reduce Noise ..........................................................39Sound SetupHow to Select the Audio Mode ............................................40How to Adjust the Desired Audio Mode ..............................41How to Use the Automatic Volume Control ..........................42How to Select MTS(Multi-Channel Sound) ...........................43How to Listen to SRS TruSurround XT (Surround) ................44How to Set the Output of Subwoofer ...................................45How to Set the Audio Output ...............................................46How to Set the Digital Audio Output ....................................47How to Set Audio Language ................................................48Channel SetupHow to Store Channels Automatically ..................................49How to Add/Erase Channels Manually .................................50How to Set Favorite Channels .............................................51How to Fine Tune Channel Reception ..................................52How to the LNA (Low-Noise-Amplifier) Feature ...................53Function SetupHow to Choose Your Language ...........................................54How to Set Clock, On/Off Time, Sleep Time ........................55How to Set the Geometry in PC Mode ..................................57How to Set Key Lock ...........................................................58How To Set Block Program .................................................60How to View Closed Captions ..............................................62DTV SetupHow to Use the Current Channel Guide ..............................64How to Reserve TV Programs Using the Total Channel Guide....64How to Use TV Program Reservation ...................................65How to Check or Cancel a Scheduled TV Program ...............66How to Use Memory Mode...............................67AppendixHow to Use an External Device Using the Remote Control ...75Glossary .............................................................................78Troubleshooting ..................................................................81Care and Cleaning ..............................................................83Product Specifications ........................................................84
GENERAL INFORMATION5Safety Precaution The contents of this section are provided for the safety of users and their property.Please read the instructions carefully before using.Do not connect multiple electricalappliances to a single outlet.- It may cause a fire due to overheating fromthe outlet.Outdoor Antenna Grounding If an outside antenna or cable system is connected to the TV, be sure the antenna orcable system is grounded so as to provide some protection against voltage surgesand built-up static charges. Section 810 of the National Electrical Code, ANSI/NFPANo.70-1984, provides information about proper grounding of the mast and supportingstructure, grounding of the lead-in wire to an antenna discharge unit, size ofgrounding conductors, location of antenna discharge unit, connection to groundingelectrodes, and requirements for the grounding electrode.Example of Grounding According to National Electrical CodeInstructionDo not use or store a flammablespray or inflammable things near theTV.- They may cause explosion or fire.Do not install the TV in abookshelf, closet, or a place wherethere is poor air circulation.- Fire may be caused due to the rise ofinternal temperature.Make sure to remove the speakersbefore moving the TV with speakersmounted on it. - When the speakers are detached from theunit while carrying it, this may cause damageto the unit or personal injury. Any necessary action such as making theantenna cable loop at the entrance of thebuilding should be taken to prevent rainwateron the outdoor antenna cable from possiblyrunning into the indoor.- If raindrop gets into the LCD TV, it maycause a fire or an electric shock.
6HYUNDAI LCD TVGENERAL INFORMATIONIf there is a persistent accumulationof dusts or water on the plug, pleasemake sure to wipe it off using a drycloth.- It may cause a fire or an electric shock.Firmly plug in the power cord so thatit does not pull out.- An unstable connection may cause fire.Do not use a damaged power cordor plug, or loose outlet.- It may cause electric shock or fire.Do not put a water bowl, vase,candle, bug repellant smoke,cigarette, plants, or heavy thing onthe TV.- It may cause electric shock or fire and alsoheavy things may cause injury when theyfall.Do not install in a place where thereis oil, smoke, excessive humidity, orwhere water may be sprinkled on it.- This may cause electric shock or fire.Do not install on an unstable placeor small support.- This may cause the TV to fall, resulting inserious injury to a child or adult.Never attempt to open, fix, or modifyyour TV.- When there is a need for fixing, call aservice center. Fire or electric shock may becaused.Do not put a metallic object like chopstick,wire, or puncher or inflammables like paperor a match in a vent, headphone jack, or AVjacks of the TV.- Electric shock or fire may be caused.When the TV produces abnormal noise,burning smell, or smoke, unplug the TVimmediately and call a service center.- Electric shock or fire may be caused.
GENERAL INFORMATION7Safety Precaution ......................................Continued from previous pageThe contents of this section are provided for the safety of users and their property.Please read the instructions carefully before using.Do not place any heat sources such asradiators and heat registers, etc. near the TV.- It may cause a fire.Do not block ventilating slits with a tablecloth.- Blocking the ventilation slits may produceinner heat increase, resulting in a fire.Keep the TV at least 10cm away from thewall for ventilation.- Fire may be caused due to the rise of innertemperature.Do not allow children to climb or play on theTV.- If it falls over on children, it may causeserious injury.Do not place toys and cookies, etc. on the TV,which may attract children’s attention. - If it falls over on children, it may cause seriousinjury. When cleaning the TV, make sure todisconnect the power plug and use a dry, softcloth for a cleanup.- Please avoid using chemicals such as wax,benzene, alcohol, thinner, mosquito spray,air freshener, lubricant or syntheticdetergent.Unplug when you do not use your TV for along time.- If dust is stacked on the TV, electric shockor fire may be caused from heat, fire, ordeterioration of insulation.When moving the TV, two or more people areadvised to carry it.- Injury or damage may be caused when theTV falls.Consult a service center or customer servicefor inside cleaning about once a year.- When dust is piled inside the TV for longtime, fire or malfunction may be caused.
8HYUNDAI LCD TVGENERAL INFORMATIONDo not install the product on the floor.- If it falls over, your child may be injured.Unplug the product during lightning orthunderstorms and never touch the antennacable.- It may cause a fire or an electric shock.Keep the remote control batteries out ofsight and out reach of children.- If your child swallows a battery, see yourdoctor immediately.When replacing batteries, make sure tomatch the batteries to the (+) and (-) marksin the battery compartment.- Mismatching of polarities may result ininternal damage to batteries, fire due toleakage or contamination.Always use the standard batteries and avoidusing old batteries together with new ones.- Otherwise it may result in internal damageto batteries, fire due to leakage orcontamination.In the event of damaging or dropping theproduct, switch off the power and removethe plug.- Using a damaged product may cause anelectric shock or a fire.- Contact your local service center.Before moving the product, ensure to switchoff the power and unplug all the electricalcords and the external connection cords suchas an antenna cable and other sourceconnections, etc.- An electrical cord(s) may be damaged,resulting in a fire or an electrical shock.Ensure the power cord doesn’t trailacross any hot objects like a heater.- This may cause a fire or an electric shock.Consult a service center or customerservice for inside cleaning aboutonce a year. - When dust is piled inside the PDP for long time,fire or malfunction may be caused.
9GENERAL INFORMATIONContents of the Packagehen opening the package, please ensure to check the following accessories provided. Products Sold Separately If you want to purchase separately sold products, consult a service center, electronics shops, or parts seller.POWERSOURCEFREEZESLEEPASPECTCAPTIONFAVPREV-/DRFSERVICEINFOVOL+VOL-MENUEXITOKEPGL-TURNR-TURNTILTSOURCECH-CH+ADD/ERPICTURESOUNDSRSSAPPIPON/OFFSOURCESIZESWAPPOSITIONPower CordAntenna Cable(coaxial cable) User's GuideRemote Control & 2 batteries(1.5V AAA)Hdmi cable Component Cable (Y, Pb, Pr)Composite Cable (Video/Audio)PC signal Cable (D-SUB)Audio Cable (PC)Audio Cable (DIV/DVD)Wall Mounting SupportS-video Cable
10HYUNDAI LCD TVGENERAL INFORMATIONParts Names and Functions - For Q40* Model onlyFront View* This product image may be a bit different from the actual product.- Power Indicator Status -Speaker Power switchUse this switch to turn on/off power.Remote sensor and power LED.- Point the remote control toward here.- It displays standby or operation status.Power buttonUse this button to turn on or off the TV.Source buttonUse this button to switch among inputsconnected to the TV.Menu buttonUse this button to display or exit from menus.Select buttonUse this button to select each item of menu.Channel buttonsUse these buttons to change channels. Thesebuttons also serve as the cursor of Down andUp buttons when in Menu mode.Volume buttonsUse these buttons for your desired sound level.These buttons also serve as the cursor ofSelect/Adjust when in Menu mode.IndicatorRedGreenStatusStandbyPower on
11GENERAL INFORMATIONRear View* This product image may be a bit different from the actual product.Power Switchuse this switch to tum on/offpowerPower(AC) Input terminalConnect the power cord to thisterminal.RS-232 input terminalConnect to the RS-232 terminal of aPC to check its service.S/P DiF optical digital audiooutput terminalD-SUB input terminalD-SUB Audio input terminalComponent 1 Video input terminalComponent 1 Audio input terminalComponent 2 Video input terminalComponent 2 Audio input terminalVideo input terminalS-Video input terminalS-Video/Video Audio input terminalAntenna (Analog/DTV) inputterminal
12HYUNDAI LCD TVGENERAL INFORMATIONRear View* This product image may be a bit different from the actual product.Power Switchuse this switch to tum on/offpowerPower(AC) Input terminalConnect the power cord to thisterminal.RS-232 input terminalConnect to the RS-232 terminal of aPC to check its service.S/P DiF optical digital audiooutput terminalD-SUB input terminalD-SUB Audio input terminalComponent 1 Video input terminalComponent 1 Audio input terminalComponent 2 Video input terminalComponent 2 Audio input terminalVideo input terminalS-Video input terminalS-Video/Video Audio input terminalAntenna (Analog/DTV) inputterminal
13GENERAL INFORMATIONRemote Control 1. POWER/STANDBY2. POWER LED3. MAGIC4. ASPECT5. CAPTION6. ADD/ERASEUse this button to add or erase channels.7. INFOMATIONUse this button to display resolution or various program8. PICTURE 9. SOUND10. SRSUse this button to select 3D surround sound.11. SAP12. EXIT13. MENU SELECTIONUse this button to select menu item14. LEFT/RIGHT MOVE/ADJUSTUse these buttons to move between menu items or to adjusteach item.15. SOURCE16. TILT17. PIP- ON/OFF: - SIZE : Use this button to select the size of sub-picture.- SIZE : Use this button to select the size of sub-picture.- POSITION : Use this button to select the position of sub-picture.- SWAP : Use this button to swap main and sub-picture.
14HYUNDAI LCD TVGENERAL INFORMATIONHow to Insert Batteries in Remote Control * Battery type :1.5V/AAAPress and hold ∆part and pushto open cover. Insert batteries with properpolarities of +and -.Use the remote control with coverclosed.18. EPG19. MENUUse this button to call the OSD to the screen.20. NUMERIC KEYS21. SERVICE22. FAV23. SELLP24. FREEZE
15CONNECTIONSHow to Watch Both Analog and Digital Broadcasts with a Single AntennaYou can watch both analog and digital broadcasts by connecting a single antenna.Connection MethodMake sure that the antenna cable is connected to ANT (ATV/DTV).- Antenna or Cable service without a cable box connections- For optimum picture quality, adjust antenna direction if need,How to WatchTurn on TV to activate Auto Channel (See page 49) to memorize the available channels.Press INPUT on remote control.Press to move to Analog TV or Digital TV and press to select.Press button or button to select the desired channels.Ex.) When you want to watch cable channel number 120, press +100 + 2 + 0the digit buttons.1234CH-SOURCE- When inserting a 75 ohm coaxial cable into the input connection, ensure the wire tip not to bend.- If you experience poor signal reception, we recommend you purchase a signal amplifier for better picture quality.OKOK
16CONNECTIONSHYUNDAI LCD TV- When connecting an external device, ensure to read the connecting device’s manual. The location or the numberof the terminals on the external device may be different depending on its model. - Connect a HDMI (or DVI)connection to the output of DVD, cable receiver or satellite receiver. Connecting aHDMI (or DVI)connection to a PC may result in a message, “Unknown Signal”. - Do not power on until all necessary connections are made. If power is given before connections completed, thismay damage the product. - Make sure to match the cable in color with the terminal.- Make sure to check the type of terminals to be connected.Before Connecting the Video/Audio Connections to External Devices... Please make sure to read the following information on connection to enjoy best picture quality.Video/Audio connectorsTypes of video/audio cable :➀HDMI ➁ 15-Pin D-Sub ➂ COMPONENT ➃ S-VIDEO ➄ COMPOSITE Best picture quality is displayed in the following order.The superior picture quality starts from the far left side.
17CONNECTIONSHow to Connect a VCR/Cable ReceiverConnection MethodConnect the Video cable or S-Video cable between Video/S-Video output terminal of VCR or Cable receiver andVideo/S-Video input terminal of TV. (Connect the jacks to terminals in the same color.)Connect the Audio cable (Left: white, Right: red) between Audio output terminal of VCR or cable receiver andAudio input terminal of TV. (Connect the jacks to terminals in the same color.)How to WatchTurn on TV to press on remote control.Press to move to Video or S-Video and press to select.For more information, read the user’s guide of VCR or cable receiver. 112To enjoy better picture quality, use the S-Video cable rather than the composite cable. Audio cableS-Video CableVideo cableVideo/Cable receiverSOURCE2OKOKAudio cable
18CONNECTIONSHYUNDAI LCD TVHow to Connect a DTV Receiver or DVD PlayerConnection MethodConnect the Video cable (Y, Pb, Pr) between output terminals (Y, Pb, Pr) of DTV receiver or DVD player and theinput terminals (Y, Pb, Pr) of DTV/DVD (480i/480p/720p/1080i) on the rear of TV. (Connect the jacks to terminal in the same color.)Connect the Audio cable between Audio output terminal of DTV receiver or DVD player and Audio inputterminal for DTV/DVD Audio on the rear of TV. (Connect the jacks to terminals in the same color.)How to WatchTurn on TV and press on remote control. Press to move Component 1 or Component 2 and press to select.For more information, read the user’s guide of DTV receiver or DVD player.1- Output terminal mark (Y, Pb, and Pr) of DVD player may be indicated as Y, B-Y, R-Y/Y-Cb-Cr /Y-Pb-Pr accordingto the type of DVD player models.- If your DVD player or Set Top Box supports HDMI (or DVI) /D-SUB, see Connecting to a PC (page 25) forconnection. You can enjoy more clear picture quality.12Audio cable2SOURCEVideo (Y, Pb, Pr) cableDTV receiver / DVD PlayerOKOK
19CONNECTIONSHow to Connect a Camcorder/Game PlayerConnection MethodConnect the Video/S-Video cable between Video/S-Video output terminal of Camcorder/Game player andVideo/S-Video input terminal of TV. (Connect cables and terminal in the same colors.)Connect the Audio cable (Left-white, Right-red) between Audio output terminal of Camcorder/Game playerand Audio input terminal of TV. (Connect the jacks to terminals in the same color.)How to WatchTurn on TV and press on remote control. Press to move Video or S-Video and press to select.For more information, read the user’s guide of Game player or Camcorder.1212Game PlayerCamcorderSOURCEAudio cableVideo cableS-Video CableOKOK
20CONNECTIONSHYUNDAI LCD TVHDMI CableHow to Connect to a PCConnection MethodConnect the PC signal cable (15-pin D-sub) between the output terminal of PC and the D-sub input terminal ofTV.Connect the Audio cable between Audio output terminal of PC and Audio input terminal for PC on the rear ofTV. (Connect the jacks to terminals in the same color.)When Using as a PC MonitorTurn on TV and press on remote control.Press to move to PC or HDMI (or DVI) and then press to select.- If you use the HDMI (or DVI) connection, you can enjoy better picture quality.- This product supports Plug-and-Play function.- We recommend the above method if the DVD player or set top box supports DTV signal with HDMI (or DVI)/D-Sub (15 pin) cable for the better picture quality.- If you input an unsupported resolution in PC or HDMI (or DVI) mode, the screen won’t be displayed properly. 1212D-SUB cableAudio CableSOURCEOKOKor
21CONNECTIONSResolution31.4737.5031.4737.8846.8848.3656.5060.02Vertical frequency59.9475.0070.0860.3275.0060.0070.1075.03720 x 400800 x 6001024 x 768640 x 480Horizontal frequencyResolutions Supported in PC
22CONNECTIONSHYUNDAI LCD TVHDMI Connection - For HDMI Model onlyHDMI *1 (High Definition Multi media Interface) is the first all digital consumer electronics A/V interface thatsupportsuncompressed standard. The HDMI terminal supports both video and audio information.To the HDMI*1input terminal, you can connect an EIA/CEA-861/861B*2 compliant consumer electronic device, such asa SetTop Box or DVD player with HDMI or DVI output terminal.Input a High-bandwidth Digital Content Protection(HDCP) high-definition picture source to this HDMI terminal, so youcan display the high-definition pictures onthis TV in the digital form.Compatible VIDEO SignalThis input terminal is not intended for use with computers.Resolution1920 X 1080i720 X 480p640 X 480p1280 X 720pVertical scanning frequency(Hz)59.94/6059.94/6059.94/6059.94/601080i480p720pNo. of dots(HXV)HDMIHDMI CableSet Top BoxDVD PlayerIf the external device has DVIoutput only, use a DVI to HDMIadapter *3 cable to connect tothe HDMI terminal.
23CONNECTIONSCompatible sampling freguency of AUDIO signal through HDMI (L.PCM) : 48kHz / 44.1kHz / 32 kHzNotes:• This HDMI connector is Type A.• If you connect an equipment without a digital output terminal, connect to the COMPONENT VIDEO, S VIDEO orVIDEO input terminal on the TV so you can enjoy an analog signal.• The DIGITAL IN terminal can only be used with 1080i, 480i or 480p picture signals. Set the Digital Set -Top -BoxDIGITAL OUT terminal Output setting to 1080i, 480i or 480p. For detailed information, refer to the DigitalSet -Top -Box instruction manual. If you cannot display the picture because your Digital Set -Top -Box doesnot have a DIGITAL OUT terminal Output setting, use the component Video Input (or the S Video Input orVideo Input). In this case the picture will be displayed as an analog signal.How to WatchTurn on TV and Press on remote control.Turn on TV and Press on the remote controlpress button and press up/down button to move to externel inputpress button or Press button to get the HDMI input- *1 HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks ofHDMILicensing LLC.- *2 EIA/CEA-861/861B profiles compliance covers profiles for transmission of uncompressed digital videoincludinghigh bandwidth digital content protection.12345SOURCEOKMENUOKOKOK
24CONNECTIONSHYUNDAI LCD TVHow to Connect an External Visual DeviceYou can connect your TV to other visual device to record TV programs to VCR.Connection MethodConnect the Composite Video cable between Video input terminals of an external device and the Video outputterminals for Video on the rear of TV.(Connect the jacks to terminals in the same color.)Connect the Audio cable between Audio input terminal (Left-white, Right-red) of an external device and Audiooutput terminal for Video on the rear of TV. (Connect the jacks and terminals in the same color.)For more information, read the user’s guide of an external device.123External Visual DeviceAudio CableVideo CableVideo and Audio outputs are available only when watching an Analog TV, Digital TV or VCR. This is not supportedin the Input Mode of Component, HDMI (or DVI) /D-SUB or S-Video.
25CONNECTIONSHow to Use Digital SoundConnection MethodConnect the coaxial cable to the digital audio output terminal for coaxial cable or SPDIF optical digital audiooutput terminal on the rear of TV.Select Digital Sound Output. (See page 46~47)For more information, read the user’s guide of the external sound device.123Coaxial cableAmplifier with Built-in Dolby Digital AC3Digital Audio Output is available when watching a digital TV program.
26HYUNDAI LCD TV123How to Select TUNER MODEYou can choose the RF-input between off-air and cable.MENUOKOKEXITPress Menu button.Menu items appear on the screen.Press up or down button to move to “channel”Press or buttons to select “channel”Press up or down button to move to Tuner ModePress or buttons to select Tuner ModePress up or down button to move to Air / Cableand Press buttons to select item you want.Press MENU button after the setting is done, and Menu goes to the previous menu.If the EXIT button is pressed, the menu will appear.OKOKOKCHANNEL
27CHANNEL123How to Select TUNER MODEYou can choose the RF-input between off-air and cable.MENUOKOKEXITPress Menu button.Menu items appear on the screen.Press up or down button to move to “channel”Press or buttons to select “channel”Press up or down button to move to Tuner ModePress or buttons to select Tuner ModePress up or down button to move to Air / Cableand Press buttons to select item you want.Press MENU button after the setting is done, and Menu goes to the previous menu.If the EXIT button is pressed, the menu will appear.OKOKOK
28HYUNDAI LCD TVCHANNELHow to Store Channels Automatically- Your TV can memorize and store all of the available analog/digital broadcast signals for both “off-air”(antenna) and cable channels. - Before your television can begin memorizing the available channels, make sure to specify the type of thesignal source (antenna or cable) connected to your TV.123OKOKOKPress Menu button.Menu items appear on the screen.Press Up or Down buttons to move to “channel”.Press button or button to select “channel”.Press Up or Down button to move to “AUTO SCAN”. • AIR ONLY : Watching the analog over-the-air and digital over-the-air signals via ANT input port.• CABLE ONLY : Watching the Cable and digital cable signals via ANT input port.Press button and Auto Scan is Activated*CABLE BAND NOTE : STD (Standard), HRC (HRC band), IRC (IRC band)(For further band information, contact yourcable service provider.)MENUOK- In the middle of AUTO SCAN, if you press button once, AUTO SCAN is interrupted.Press the Menu button to exit. Then the original channel is returned. - If you have changed the connection of an antenna or cable, perform AUTO SCAN again.
29CHANNELHow to Add/Erase Channels ManuallyUsers can add or erase the desired channels.1234Press \channel buttons or the number buttons on remote control to view the channels that will be added or erased.Add the channel by pressing theADD/ERASE button. Press the ADD/ERASE button to erase the channelPress Left and Right buttons to set YES/NO .Press button to set.CH-CH+OKOKADD/ERWhen you wish to restore any digital channels that have been deleted, you need to perform AUTO SCAN again.If you want to directly use the number buttons for storing, contact your local broadcasting company or cablecompany for the required channel digits. Unlike an analog broadcast, a digital broadcast uses virtual channels,not fixed channels. For more information on virtual channels, see page 62.OK
30HYUNDAI LCD TVCHANNELHow to Set Channel Edit and Favorite ChannelsUsers can store frequently watched channels to quickly access a preferred channel.The Favorite function is available only with remote control.123OKOKOKPress Menu button.Menu items appear on the screen.Press Up or Down buttons to move to “channel” .Press button or to select “channel”.Press Up or Down button to move to “channel edit” .Press button or to select “channel edit”.Press button to “select”.You can channel and Favorite-channels by pressing add/erase, Up/Down, left/right and buttons.Press MENU or exit button after the setting is done, and youcan save the channels you select.MENUEXITOKOKOKOK
31CHANNELHow to See Signal StrengthThe function is only for DTV channel.12OKOKPress menu button.menu items appear on the screen.Press Up or Down button to move to “channel” .Press or button to select “channel”.Press Up or Down button to move to “signal strength” .Press or button to select “signal strength”then the signal strength of anntena appears on the screen.Press Menu button after the setting is done.menu goes to the previous menuIf the Exit button is pressed, the menu will disappear.MENUEXITOKOK
32HYUNDAI LCD TVCHANNELHow to Set The Input ModeThe Favorite function is available only with remote control.123OKOKOKPress Menu button.Menu items appear on the screen.Press Up or Down button to move to “channel” .Press or button to select “channel”.Press Up or Down button to move to “external input” .Press or button to select “external input”.Press left or right button to set input modeWhenever press left/right button to set input modeChanges in following order.TV(Air/Cable) AVI(CVBS) AVI(S-Video) Ypbpr1Ypbpr2 HDMi VGAPress Menu button after the setting is done, and Menu goes to the previous Menu.If the Exit button is prested, the menu will appear.You can set the input mode quickly using the remote control press the buttonWhenever press this button, the input mode changes if following orderTV(Air/Cable) AVI(CVBS) AVI(S-Video) Ypbpr1Ypbpr2 HDMi VGASOURCEMENUEXITOKOK
33PICTUREPICTURE123How to Select the Picture ModeUsers can automatically adjust the picture mode according to the input mode.How to Directly Select Picture Mode : Press Pricture button.- Whenever press this button the mode changes in following arder. Custom Standard Mild VIVID.OKOKOKPress Menu button.Menu items appear on the screen.Press Up or Down button to move to picture. Press or button to select picture.Press Up or Down button to move to picture modePress or button to select Whenever you press Up or Down button, the modechanges in following order.Custom Standard Mild Vivid Press MENU button after the setting is done, and Menu goes to the previous menu.If the EXIT button is pressed, the menu will disappear.CUSTOM : When the user wants to directly set the values See the next pageSTANDARD : Most video contents are appropriate to this mode. MILD : Soft display.VIVIDI: Clear and Vivid display- The adjustment of Contrast, Brightness, Sharpness, Saturation and Tint is allowed only in the Custom mode.MENUEXITOKOK
How to Set the Desired PictureUsers can manually adjust their desired picture.Press Menu button.Menu items appear on the screen.Press Up or Down button to move to picturePress or button to select picture mode.Press Up or Down button to move to picture modePress button or to select picture modePress Up or Down buttom to move to custom and Press button to make a selectionPress button or to move to picture mode.Press button to select Brightness .Brightness apprears on the right.Press Left or Right button to adjust.Press MENU button after the setting is done, and Menu goes to the previous menu.If the EXIT button is pressed, the menu disappears.BRIGHTNESS : Adjust the brightness of the entire picture. SATURATION : Adjust colors into deeper or lighter colors.CONTRAST : Adjust the brightness and darkness of object and background. SHARPNESS : Adjust clarity of outline of objects.TINT : Adjust colors naturally.COLOR TEMP : Whenever You Press left or right button, the mode changes infollowing order COOL NORMAL WARMDNR : Reuce the Digital Noise in the DTV mode.SHARPNESS, COLOR, TINT are not applied to PC and HDMI (or DVI) modes.123456OKOKOKOKOKOK34HYUNDAI LCD TVPICTUREMENUEXITOKOKOKOK
Press Aspect button.Menu items appear on the screen.Whenever you press aspect button the mode changes in following order.WIDE NORMAL ZOOMSOUNDASPECTHow to Directly Select Sound Mode : Press SOUND button.Users can select Custom Standard M ovies Music Speech Press Menu button.Menu items appear on the screen.Press Up or Down button to move to sound . Press or button to select sound .Press Up or Down button to move to sound modePress or button to select sound mode.Mode is selected.Whenever you press Up or Down button, the mode changes in following order.CUSTOM STANDARD MOVIESMUSIC SPEECH Press MENU button after the setting is done, and Menu goes to the previous menu.If the EXIT button is pressed, the menu will disappear.CUSOTM : When the user wants to set the value. See the next pageSTANDARD : General sound mode. This fits most audio contents.MOVIES : For enjoying vivid sound.SPEECH : For enjoying clear sound. MUSIC : For enjoying original sound.123OKOKOK35PICTUREHow to Select the Aspect RatioUsers can manually adjust size of the screen.How to Select the Audio ModeUsers can adjust sound mode automatically as they want.MENUEXITOKOK
36HYUNDAI LCD TVHow to Adjust the Desired Audio Mode Users can adjust sound mode manually as they want.Press Menu button.Menu items appear on the screen.Press Up or Down button to move to soundPress or button to move to soundPress Up or Down button to move to sound modePress button or to selectPress Up or Down button to move to customand press button to make a selectionPress Up or Down to select items(Table, Boss and blance)Press or button to select itemsMove between the items listed using UP or Down button. Adjust the level of the item selected using Left or Right button.Press MENU button after the setting is done, and Menu goes tothe previous menu.If the EXIT button is pressed, the menu disappears.TREBLE: Adjusts the range size of high sound.BASS: Adjusts the range size of low sound. BALANCE : Adjusts the balance of left and right speakers.12345OKOKOKOKOKMENUEXITOKOKOKOKSOUND
37SOUNDHow to Use the Automatic Volume ControlWith this Automatic Volume Level Control, everything you watch will always maintain the volume level that youdecide. Basically it is set to “off”Press Menu button.Menu items appear on the screen.Press Up or Down button to move to sound .Press or button to select sound .Press Up or Down button to move to AVL.Press or button to select AVL. Press or button to set to on/off.Press button to set to on/off.Press MENU button after the setting is done, and Menu goes to the previous menu.If the EXIT button is pressed, the menu will disappear.123OKOKOKMENUEXITOKOKOK
38HYUNDAI LCD TVSOUNDHow to Listen to SRS TruSurround XT (Surround)Users can enjoy spectacular 3D sound. Press Menu button.Menu items appear on the screen.Press Up or Down button to move to sound.Press or button to select sound.Press Up or Down button to move to SRS.Press or button to select SRS.Press Left and Right buttons to set to OFF/Tresurround XT . Press MENU button after the setting is done, and Menu goes to the previous menu.If the EXIT button is pressed, the menu will disappear.123The SRS TruSurround XT function is activated only when the audio input signal is Stereo.is a trademark of SRS Labs, Inc.TruSurround XT technology is incorporated under license from SRS Labs, Inc.OKOKOKMENUEXITOKOK
39SOUNDHow to Set Audio LanguageWhile watching a digital program, you can listen to foreign language if the program is supported with foreignlanguage.Press Menu button.Menu items appear on the screen.Press Up or Down button to move to sound .Press or button to select sound .Press Up or Down button to move to AUDIO LANGUAGE .Press or button to select AUDIO LANGUAGE .Whenever you press Left or Right button,the mode shifts in following order.ENGLISH SPANISH FRANCEPress MENU button after the setting is done, and Menu goes to the previous menu.If the EXIT button is pressed, the menu will disappear.123OKOKOKSAPHow to Directly Select Audio Language : Press the button.- Whenever you press this button, the mode shifts MONO STEREO SAP in order when receiving analogsignals.You can select one of the languages listed you prefer when receiving digital signals.- If you want to see language information while watching a digital channel, press the button to displaylanguage information that is currently received.INFOMENUEXITOKOK
40HYUNDAI LCD TVSOUNDHow to Set the Digital Audio OutputThe digital audio output terminal allows you to enjoy digital sound. (For more details, see page 30)Press Menu button.Menu items appear on the screen.Press Up or Down button to move to sound .Press or button to select sound.Press Up and Down buttons to move to“DIGITAL AUDIO OUT”Press or buttons to select Digital Audio out.Whenever you press Left or Right button, the mode shifts in following order.Dolby PCM Press MENU button after the setting is done, and Menu goes to the previous menu.If the EXIT button is pressed, the menu will disappear.Manufactured under license from Dolby Laboratories.“Dolby” and the double-D symbol are trademarks of Dolby Laboratories.12OKOKOKMENUEXITOKOK
41SOUNDHow to Set Auto LockThis function is used to prevent from using the control buttons on the front top of the TV or from connectingexternal devices to the TV. You make sure to set a PIN number to use this function.1234567Press Menu button.Menu items appear on the screen.Press Up or Down button to move to function .Press or button to select function .Press Up or Down buttons to move to “AUTO LOCK”.Press or button to select “AUTO LOCK”.Then the Enter PIN number window appears. The default is 4 digits (0-0-0-0).- To set Key Lock :Press Up or Down button to move to “SET BLOCKING”. Press or button to select “SET BLOCKING”Press Up or Down button to move to ON/OFF . Press or button to select “SET BLOCKING”- To set Channel blocking :Press Up or Down button to move to “CHANNEL BLOCKING”.Press button to select “CHANNEL BLOCKING”.Then the AUX BLOCK items appear.Press Up and Down buttons to move to theitem you want. Press button to set to LOCK/UNBAK . If the item is set to ON, such item is disabled.OKOKOKOKOKOKOKMENUOKOKOKOKOKOK
42HYUNDAI LCD TVSOUNDContinued from previous page.....(Set the Lock External Signal function.)98- To set block by rating :Press Up or Down button to move to “block by rating”. Press button to select “block by rating”.- To update DTV rating :Press Up or Down button to move to “setup code”. Press button to select “block by rating”.Press Up or Down button to select “SETUP CODE”. Press button to select “SETUP CODE”Then the Enter PIN number window appears.Enter a 4- digit PIN number.When the Confirm PIN number window appears,emter the PIN number againPress MENU button after the setting is done, and Menu goes to the previous menu.If the EXIT button is pressed, the menu will appear.OKOK- The Lock External SIGNAL function is designed to prevent a VCR or game player from being connected to the TV. - If you forgot your PIN number, Enter a 4-digit number (2-5-0-1) inthe pin number window. - The Key Lock function will be disengaged when you turn off and then on AC power or when a power failurehappens. 1110OKOKOKEXIT
43FUNCTIONHow To Set Block By RatingThis(V-Chip) is used to block program viewing based on the ratings sent by the broadcasting station.The default setting is to allow all programs to be viewed. Viewing can be blocked by the type of program and bythe categories chosen to be blocked.V-Chip rating and categoriesRating guidelines are provided by broadcasting stations. Most television programs and television movies can beblocked by TV Rating and/or Individual Categories. Movies that have been shown at the theaters or direct-to-video movies use the Movie Rating System (MPAA) only.Ratings for Movies previously shown in theaters :Ratings for Television programs including made-for-TV movies :Continued on next page ......Movie Ratings : - Blocking Off (Permits all programs)- G (General audience)- PG (Parental guidance suggested)- PG-13 (Parents strongly cautioned)- R (Restricted)- NC-17 (No one 17 and under admitted)- X (Adult only)If you set PG-13 : G and PG movies will be available , PG-13, R, NC-17 and X will be blocked.- TV-G (General audience)- TV-PG (Parental guidance suggested)- TV-14 (Parents strongly cautioned)- TV-MA (Mature audience only)- TV-Y (All children)- TV-Y7 (Children 7 years older)TV Rating Children : - Age (applies to TV-Y, TV-Y7)- Fantasy Violence (applies to TV-Y7)TV Rating General : - Age (applies to TV-G, TV-PG, TV-14, TV-MA)- Dialogue-sexual dialogue (applies to TV-PG, TV-14)- U Language-adult language (applies to TV-PG, TV-14, TV-MA)- Sex-sexual situations (applies to TV-PG, TV-14, TV-MA)- Violence (applies to TV-PG, TV-14, TV-MA)
44FUNCTIONHYUNDAI LCD TV...... Continued from previous page.12345Press Menu button. Menu items appear on the screen. Press Up or Down button to move to Auto Lock. Press or button to select Auto Lock.The message “Enter PIN” will appear. Enter your 4-digit PIN number.Press Up or Down button to move to “BLOCK BY RATING” and press buttons to mode a selection.The new screen will appear.Press Up/Down and left/right buttons to select the items(MPAA and TV Parental midelines)Press up/down and left/right buttons to select the item Press button to mode a selection. Press MENU button after the setting is done, and Menu goes to the previous menu.If the EXIT button is pressed, the menu will disappear.OKOKOKOKOKMENUEXITOKOKOK
45FUNCTIONHow to View Closed CaptionsChoices in the closed caption menu are : CC Mode, Priority (Analog caption or Digital caption), and Option.1. CC MODE :ON : Captioning information is always shown, when available. OFF : No captioning information is displayed.2. PRIORITY : You can choose whether the TV uses digital or analog captions for digital TV programs that have both or either.- ANALOG (CAPTION) : You can select a closed caption mode, which is the mode, or source, used for displayingcaptioning information for analog channels or digital channels, if available.- DIGITAL (CAPTION) : You can select a closed caption, service mode(1-7) for digital channels.The service modes support MPEG-2 based transport sources Service 1 and Service2 are theprimary and secondary languages, respectively.Service3 and service4.5.6 are additional caption sources that may be available. Continued on next page ......• CAPTION : The form for the words that scroll across the bottom of the TV screen : usually the audio portion of the programprovided for the hearing impaired.CC 1 : For video related information that can be displayed. Script can be in any language.CC 2/3/4 : Other modes used for video related information.• TEXT : The term for the words that appear in a large black frame and almost cover the entire screen :Usually message provided by the broad caster.T 1 : Blanks out a large portion of the picture on the television screen, and display program guide or anyother information currently being transmitted.T 2/3/4 : other modes that display information and blank out a large portion of the picture of the TV screen.
46FUNCTIONHYUNDAI LCD TVCOLOR : Set the color of the cc Background AUTO -> BLACK -> WHITE -> RED -> GREEN -> BLUE -> YELLOW ->MARGENTA -> CYAN OPACIFY : Specify the opacity for the - AUTO -> SOLED -> FIASHUNG -> TRANSLUCENT -> TRANSPARECAPTION SIZE : Set the size of the words - AUTO -> SMALL -> STANDARD -> LARGE CAPTION STYLE : Set the style of the words - AUTO -> STYLE1 -> STYLE2 -> STYLE3 -> STYLE4 -> STYLE5-> STYLE6 ->STYLE7.TEXT COLOR : Choose a color for the text - AUTO -> BLACK -> WHITE -> RED -> GREEN -> BLUE -> YELLOW ->MARGENTA -> CYAN TEXT OPACIFY : Specify the opacity for the text - AUTO -> SOLED -> FIASHUNG -> TRANSLUCENT -> TRANSPARENTEDGE STYLE : Select Edge style for the text - AUTO -> NONE -> RASIED -> DEPRESSED -> UNIFORM -> DROP-> SHADOWEDGE COLOR : Select Edge color for the text - AUTO -> BLACK -> WHITE -> RED -> GREEN -> BLUE -> YELLOW ->MARGENTA -> CYANITALIC : Convert the text in to italic - AUTO -> ON -> OFF UNDERLINE : Add the underline to the text - AUTO -> ON -> OFF...... Continued from previous page.3. OPTION : Customized closed captioning for the digital caption by choosing the settings for the following options :1) cc Background2) Caption TextPress Menu button. Menu items appear on the screen. Press Up or Down button to move to function and press or to select functionPress Up and Down buttons to move to “CAPTION” and press or button to make a selection.Display MODE is highlighted.Press Left and Right buttons to select “OFF” or ALWAYS ON”.Sub menu item are activated.Press Up or Down button to move the itemPress Left or Right button to select the item.1234OKOKOKOKMENUOKOK
47FUNCTIONTo select caption optionPress Up or Down button to move to caption option.Press or button to select caption option.Press left/right buttons to select Auto/Option andpress to select make a selection. If caption option selected options, CC Background and caption Text are highlighted When selectiong the CC Background and caption text, press button.Press Up or Down button to move between the items (cc Background and Caption text)Press left/right buttons to select the itemThen you can choose the CC Background and caption text by pressing up/down and left/Right buttons.Press MENU button after the setting is done, and Menu goes to the previous menu.If the EXIT button is pressed, the menu will disappear.657OK8OKOKOKEXITOKOKOKOK
48HYUNDAI LCD TV3How to Set the EPG View - This service is only for DTV mODEL.OK21OKOKPress Menu button.Menu items appear on the screen.Press Up or Down button to move to function.Press or button to select function.Press Up or Down button to move to EPG ViewPress or button to select EPG ViewPress or button to see the EPGThen you can get information on the broadcastiontime and program.Press MENU button after the setting is done, and Menu goes to the previous menu.If the EXIT button is pressed, the menu will appear.MENUOKOKOKEXITSETUP
49SETUP50345678How to Set Date / Time - Yes can automatocally turn on or off the TV at a present time, To do this, you must set the time it you wish touse the automatic on or off timersOKOKOK21OKOKOKOKOKPress Menu button.Menu item appear on the screen.Press Up or Down button to move to setupPress or button to select setupPress Up or Down button to move to “DATE/TIME”Press or button to select “DATE/TIME”Press Up or Down button to move to manual manually.Press button to set the current “DATE/TIME” Press Up/Down and Left/Right buttons to set year, month, day, Hour, Minute and AM/PMAfter setting, Press or button to exit“AUTO” is only for DTV mode.If you select “AUTO”.Press or button to select functionPress Up/Down or left/right buttons to timezoneWhenever you press the buttons, timetone is changed in following orderPacifuc Mountain Central Eastern Alaska Hawaii AtalamticPress Up or Down button to move to “DAYLIGHT SAVING”Press or button to select “DAYLIGHT SAVING”Press Up or Down button to select observe/Do not observePress or button to make a selection.Press MENU button after the setting is done, and Menu goes to the previous menu.If the EXIT button is pressed, the menu disappears.MENUOKOKOKOKOKOKOKEXIT
50HYUNDAI LCD TVSETUP51How to Set Power on Time DTV GUIDE12345Press Menu button.Menu items appear on the screen.Press Up or Down button to move to setupPress or button to select setup.Press Up/Down button to select power on timePress or button to select power on time.Press button to activate power on timewhenever you press left and right button, the modeshifts in following orderOFF DAILY ONCEIf you select once or daliy in the “ACTIVATE”You can set time and channelPress up/down button to select TimePress button to set TimePress Left or Right button to move between Hour, minute and AM/PM and Press up or down buttons to set Hour, minute and AM/PMPress Up/Down buttons to select channelPress button to set channel.Press numeric key to set channel number Press button to set.Press MENU button after the setting is done, and Menu goes to the previous menu.If the EXIT button is pressed, the menu will appears.OKOKOKOKOKMENUEXITOKOKOKOKOKOK
51SETUPHow to Set Power Off Time 1234Press Menu button.Menu items appear on the screen.Press Up or Down button to move to setupPress or button to select setup.Press Up/Down button to move to power off timePress or button to select power off time.Press button to activate power off timewhenever you press left and right button, the modeshift in following orderOFF DAILY ONCEIf you select once or daliy in the “ACTIVATE”You can set time.Press Up/Down buttons to select timePress button to set time.Press Left or Right button to move between Hour, minute and AM/PMPress Up or Down buttons to setHour, minute and AM/PM.Press button to setPress MENU button after the setting is done, and Menu goes to the previous menu.If the EXIT button is pressed, the menu will appears.OKOKOKOKMENUEXITOKOKOKOKOK
52HYUNDAI LCD TVSETUPHow to Set Sleep Time 1234Press Menu button.Menu items appear on the screen.Press Up or Down button to move to setupPress or button to set sleep time.Press Up or Down button to move to sleep timePress or button to set sleep time.Press up or down button to set sleep timewhenever you press up or down button the modeshifts in following orderOFF 15 MINUTES 30 MINUTES 60 MINUTES 90 MINUTES 120 MINUTESPress button to set.Press MENU button after the setting is done, and Menu goes to the previous menu.If the EXIT button is pressed, the menu will disappear.OKOKOKOKHow to Directly Set the sleep timer : Press the button.- Whenever press this button, the mode shifts off 15 30 60 90 120 minutesMENUOKOKOKEXITSLEEP
53SETUPHow to Choose Menu LanguageUsers can select their language preference in order to display main menus and sub menus, etc.123Press Menu button.Menu items appear on the screen.Press Up or Down button to move to setup.Press or button to select setup.Press up/down button to move to menu languagePress or button to select menu languagePress or button to set languageWhenever you press Left or Right button, the mode shifts in following order.ENGLISH FRANÇAIS ESPAÑOL Press MENU button after the setting is done, and Menu goes to the previous menu.If the EXIT button is pressed, the menu will appear.OKOKOKMENUOKOKEXIT
54HYUNDAI LCD TVSETUPHow to Set Menu OpacifyUsers can select their language preference in order to display main menus and sub menus, etc.123Press Menu button.Menu items appear on the screen.Press Up or Down buttons to move to setup .Press or button to select setupPress Up or Down button to move to move to menu opacifyPress or button to select menu opaciftyPress left or right to set menu opacify you wantPress MENU button after the setting is done, and Menu goes to the previous menu.If the EXIT button is pressed, the menu will disappear.OKOKOKMENUEXITOKOK
55SETUPHow to Set Energency Alert123Press Menu button.Menu items appear on the screen.Press Up or Down buttons to move to setup .Press or button to select setupPress Up or Down button to move to Energency Alert.Press or button to select Energency Alert.Press Up or Down button to move to Low/mediumPress left or right button to select present/descard.Press MENU button after the setting is done, and Menu goes to the previous menu.If the EXIT button is pressed, the menu will appear.OKOKOKMENUEXITOKOK
56HYUNDAI LCD TVSETUPHow to Set the Geometry in PC ModeThis function is only available in PC mode.12345Press Menu button.Menu item appear on the screen.Press Up or Down button to move to setup.Press or button to select setup.Press Up or Down buttons to move to “PC”. Press or button to select “PC”. Press Up or Down button to move to setup.Press or button to select Press Up and Down buttons to adjust v-position Press or button to adjust h-positionAfter setting press button to exitPress Up and Down buttons to move to “AUTO” Press or button to adjust h/V-position auto Press MENU button after the setting is done, and Menu goes to the previous menu.If the EXIT button is pressed, the menu disappears.H. POSITION : To adjust the horizontal position of the picture.V. POSITION : To adjust the vertical position of the picture. OKOKOKOKOKIf the display input signal (resolution) has been changed, the picture will be automatically optimized.MENUEXITOKOKOKOK
APPENDIX49VCR Setting Number Table
APPENDIX50HYUNDAI LCD TVDVD Setting Number Table
APPENDIX51AMP Setting Number TableCATV Setting Number Table
APPENDIX52HYUNDAI LCD TVGlossary 1Component video Component video is sent through three cables: two color shade (chrominance) signalsand one brightness (luminance) signal. Component video achieves greater coloraccuracy than composite video or S-VIDEO by splitting chrominance into two separateportions.Composite video Composite video is sent through a single cable. Composite video combines the colorshade (chrominance) and brightness (luminance) information into one video signal.S-VIDEO S-VIDEO requires a single cable, which carries the brightness (luminance) and color(chrominance) signals of the picture separately. S-VIDEO provides better resolutionthan composite video, which carries the signals together.480i Provides 480 lines of resolution. Displays images using interlaced scanning, which firsttransmits all the odd lines on the TV screen and then the even lines.480p Provides 480 lines of resolution. Displays images using progressive scanning, whichtransmits each line from top to bottom.720p Provides 720 lines of resolution. Displays images using progressive scanning, whichtransmits each line from top to bottom.1080i Provides 1080 lines of resolution. Displays images using interlaced scanning, whichfirst transmits all the odd lines on the TV screen and then the even lines. 1080i is oneof the formats used by HDTV (High Definition TV).Digital television (DTV) A new technology for transmitting and receiving broadcast television signals. DTVprovides higher resolution and improved sound quality over analog television.HDTV(High Definition TV) HDTV is a new kind of digital TV, creating a high quality picture, high definition. TheHDTV provides a theater-like screen with an aspect ratio of 16:9. Supports 720p orhigher.SDTV(Standard Definition TV) SDTV is a new kind of standard definition digital TV, having a range of lower resolutionthan the HDTV. Supports 480i.Cable Broadcast Receiver A device that receives cable broadcasting. Connecting it to your TV set allows you towatch a various channels. (Converter)Satellite Broadcasting Provides crisp picture and clear audio quality throughout the country via a satellite. VHF/UHF VHF (Very High Frequency) is the part of the frequency spectrum from 30 to 300megahertz. UHF (Ultra High Frequency) is the part of the frequency spectrum from 300to 3,000 megahertz.
APPENDIXGlossary 253DVD DVD (Digital Versatile Disc) is an optical disc that can store a huge volume ofmultimedia such as video, game, and audio application, etc.Coaxial Cable Coaxial cable is the kind of rounded copper cable, which is generally used for TVantenna.Aspect ratio Refers to the ratio between the width and height of the screen. This TV has a 16:9(widescreen) aspect ratio, as opposed to a 4:3 aspect ratio.Picture Mode Picture Mode features the optimal picture quality. There are Standard-Dynamic-Movie-Mild- Custom features in order. “CUSTOM” allows you to adjust Contrast, Brightness,Sharpness, Color and Tint.Sound Mode Sound Mode features the optimal sound quality. There are Standard-News-Music-Sports- Custom features in order. “CUSTOM” allows you to adjust high frequencysound, middle frequency sound and low frequency sound.Digital Broadcasting Video and Audio signals digitized and transmitted by broadcasting companiescomplying with the new digital television standard developed by the ATSC (AdvancedTelevision System Committee). Digital Broadcasting technology provides multimediaservices including a variety of additional services as well as high-definition qualitypicture.Analog Broadcasting ATSC-based Video and Audio signals transmitted by broadcasting companies.SRS TruSurround TX A well-recognized 3D sound technology developed by US SRS Labs, Inc.This technology delivers the ultimate audio experience only with two speakers as ifthrough multi-channel speakers.Dolby Digital Formerly known as AC-3, Dolby Digital is a digital audio coding technique that reducesthe amount of data needed to produce high quality sound.Mono Audio signals are produced through a single channel. It is difficult to experience aspectacular sound since audio signals are reproduced with a single speaker.Stereo Audio signals are produced through two channels. A spectacular sound is reproducedwith two separated speakers.Widescreen Term given to picture displays with a wider aspect ratio than NTSC 4:3. Digital HDTV is16:9 widescreen. Most motion pictures also have a widescreen aspect ratio, someeven wider than 16:9.External source Refers source signals that come from other external devices such as a VCR, camcorderand DVD player, etc. than a TV set.
APPENDIXGlossary 354HYUNDAI LCD TVMTS A bilingual service provided when an overseas film, foreign drama or overseas news,etc. is aired. You can select one of two choices: mother tongue and foreign language.Or you can listen to both languages at the same time. DVI Digital Visual Interface is a specification for digital signals. This interface using TMDStransmission reduces the loss of signal, allowing to enjoy a clear and crisp image.HDMI HDMI (High-Definition Multimedia Interface) is the first and only industry-supported,uncompressed, all-digital audio/video interface.HDMI provides an interface between any audio/video source, such as a set-top box,DVD player, or A/V receiver and an audio and/or video monitor, such as a digitaltelevision (DTV), over a single cable. Virtual channels There is a new numbering system for DTV channels. The system, called the “DTVvirtual channels,” gives a number for each DTV program service, and almost alwaysuses the analog NTSC channel number as the first number for that station. The use ofvirtual channels allows stations to use the same channel number “brand” for bothNTSC and DTV. The printed listing services have not yet changed their format to showonly the DTV virtual channel numbering system. So in the example, the station is usingRF Channel 38 for DTV and is transmitting DTV programs with virtual channelnumbers 15.n. The 15.n is short hand for 15.1, and 15.2 and 15.3, etc., as there canbe more than one DTV program lineup from the station. So, 15.1 is the first DTVprogram lineup, 15.2 is the second, 15.3 is the third. Some DTV stations may haveonly one virtual channel, others perhaps as many as six.
APPENDIX55Troubleshooting Installation ProblemsPicture ProblemsSymptomHow can I install anantenna? TV screen is not clear afterinstalling an indoorsantenna.How can I view cablebroadcasting?SymptomNeither picture nor sound comes up. Picture turns on slowly after power is on.Picture is distorted or frozenwhile watching digitalbroadcasting.Input Source informationonly appears on blackscreen.Poor reception on somechannels. Black and white on somechannels.TV won’t turn on.Screen is too bright or toodark.Possible solutionRefer to pages 19~20.Indoors antenna may experience poor reception due to surrounding buildings. Pleaseinstall an outdoors antenna or wireless antenna. Please install a cable broadcasting receiver (Converter).Possible solutionCheck whether power is on.Check whether the power is cut or whether power cord is properly connected.Try to plug another product’s power cord to the outlet the TV is plugged into.This symptom is not a malfunction. This delay is designed to prevent the distorted andnoisy picture when power is on. However, if the picture does not appear more than 5minutes after power is on, call a service center. This symptom may be caused by weak reception. Contact your local station or cablecompany.Check whether your TV is properly connected to external devices.Check whether you selected proper channels. Try re-orienting your antenna. Check other channels for black and white screen. Adjust colour.Ensure the power cord is plugged.Adjust brightness.Ensure to use the remote control or power button on the product to turn off your TV. If
APPENDIX56HYUNDAI LCD TVSound ProblemsGeneralAuto On does not work.After setting the time, I turned TV off and turn it on.The programmed informationhas been erased.SymptomToo much noise occurs.No sound while viewing acable channelPicture is OK but sound doesnot come out. One of the speakers does notproduce sound.SymptomRemote control won't work.Where does the S-Videocable plug in for audiooutput?Strange noises are heard.I tried to use the TV screenas a PC monitor but it doesn’t work. you unplug the power cord, the stand-by consumption power becomes 0 (zero), whichcauses the programmed time to be erased.Ensure to use the remote control or power button on the product to turn off your TV. Ifyou unplug the power cord, the stand-by consumption power becomes 0 (zero), whichcauses the programmed time to be erased.Possible solutionCheck whether the audio setting is in the Stereo mode. In the Stereo mode, the soundmay be distorted in the area where experiences poor reception or is located far awayfrom a TV broadcasting station. Make sure an audio or audio/video component is securely inserted into the appropriatejacks. Check other channels for sound. Check the volume settings on the cablebroadcasting receiver. Try to press volume up/volume down buttons of your remote control.Try to press MUTE buttons of your remote control.Select sound balance and make proper adjustment. (Page 39)Check the speaker connection cables. Possible solutionCheck whether there is a blocking object between the remote control and TV.Make sure your TV is Power On. (In case of normal, LED on the front panel is in Red.)Check whether batteries are inserted with proper polarities(+, -).When the batteries are worn out, replace with new ones.Connect the two Audio jacks from the S-Video cable to the left and right ports on theComposite.Ticking noise during or after watching is caused by the change of ambientenvironment such as humidity and temperature, which is characterized by plasticproducts. Strange ticking noise occurs because a signal is suddenly transmitted to theTV panel. So, this is not a malfunction.Adjust the resolution referring to the standard signal mode table. Check thespecification of your video card installed in your PC. If your video card does not work insupported hardware. Try upgrading the video card’s driver.
APPENDIX57Care and CleaningCabinet Cleaning Wipe a soft dry cloth. Do not use inflammables like Benzene or Thinner, or wet clothes. Do not scratch the panel of PDP with a fingernail or pointed object. Screen Cleaning Clean the screen with a soft cloth moistened in mild glassdetergent and dry with a soft cloth.Never use any solvent on the screen such as Acetone, Benzene, orThinner, etc.Cleaning Inside When the inside needs to be cleaned, contact a service center ordistribution agent where the item is purchased. It is recommended cleaning is complete before the rainy season.

Navigation menu