Hyundai IBT LT42DW000 LCD TV User Manual

Hyundai IBT Corp. LCD TV

Contents

User Manual 1

FCC ID: PJILT42DW000 HYUNDAI CALIBRATION & CERTIFICATION TECHNOLOGIES CO., LTD. SAN 136-1, AMI-RI, BUBAL-EUP, ICHEON-SI, KYOUNGKI-DO, 467-701, KOREA TEL:+82 31 639 8517 FAX:+82 31 639 8525 www.hct.co.kr Report No. : HCT-F07-0310 1/1 ATTACHMENT E. - USER’S MANUAL-1 -
MODELS : E425D E465D E426D E466D
GENERAL INFORMATIONFCC InformationUser InstructionsThe Federal Communications Commission Radio Frequency Interference Statement includes thefollowing warning :NOTE : This equipment has been tested and found to comply with the limits for a Class B digital devicepursuant to Part 15 of the FCC Rules.These limits are designed to provide reasonable protection against harmful interference in aresidential installation. This equipment generates, uses, and can radiate radio frequency energy and,if not installed and used in accordance with the instructions, may cause harmful interference toradiocommunications. However, there is no guarantee that interference will not occur in aparticularinstallation.If this equipment does cause harmful interference to radio or television receptions, which can bedetermined by turning the equipment off and on, the user is encouraged to try to correct theinterference by one or more of the following measures :• Reorient or relocate the receiving antenna.• Increase the separation between the equipment and receiver.• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.• Consult the dealer or an experienced radio/TV technician for assistance.User InformationChanges or modifications not expressly approved by the party responsible for compliance could voidthe user’s authority to operate the equipment.Connecting of peripherals requires the use of groundedshielded signal cables.
HYUNDAI FULL HD LCD TVGENERAL INFORMATIONImportant TipImage Retention Effect (Image Sticking)1. Cause : - Image Retention Effect may come from displaying a still picture in certain period of time with at acertain area continuously, as the feature of LCD panel. This is caused due to brightness degradation.Many LCD manufacturers are trying to overcome this limitation.2. Prevention- To avoid this matter, use the product after reducing brightness and contrast, especially when a stillimage is displaying for a long time. (Contrast 50/Brightness 50 - See 33,34 page)Once image retention occurs, use the mode that displays more motion pictures. It will help reduce thismatter.3. Solution - The temporary image sticking would decrease with displaying Full-White pattern during 10 hours.* The permanent image sticking could not take off under the latest technology.This method may be used to eliminate a temporary retained image that occurs after displaying a stillimage for a certain period of time. Since it may take several minutes to several hours to remove imagesticking, it is recommendable to display motion pictures during 2~3 minutes every hour when keepingdisplaying a still image. As image sticking is influenced by the brightness of a still image beingdisplayed and its display time, it is recommended that you reduce the brightness of the screen whendisplaying a still image for a long time. * Image Sticking does not come under the warranty.
GENERAL INFORMATIONImage Sticking PrecautionWhen watching a still Image within motion pictures andWide/4:3 screen1. Note : - When the central area of the screen and the screen edges are fixed, the different brightness level ofthe edges may cause image retention on the edges when watching for a long time .- This phenomenon is the same matter to other LCD manufacturers. Please do not watch a still imagefor a long time.- If you watch a still image for a long time, this may damage your TV.* This matter does not come under the warranty. Wide, 4:3 screenBox still image
HYUNDAI FULL HD LCD TVGENERAL INFORMATIONFeaturesIntegrated HDTV A HDTV has a built-in ATSC digital tuner.It does not need a separate set-top box to receive over the-air DTV signal.Dual Scan/Multi-ViewingYou can program analog TV broadcasting and digital TV broadcasting automatically at the same timefor multi-viewing.A Wide Array of Screen SettingsYou can choose different screen settings depending on the type of program you are watching or thesurrounding conditions (the outside weather conditions). You can switch among STANDARD, MILD,VIVID, MULTIMEDIA options or you can configure the screen settings for yourself.A Wide Array of Sound SettingsYou can choose an optimal sound setting for the type of program you are watching.You can switch among custuom Standard,Movies, Music, and Speech options or you can configurethe sound settings for yourself.Favorite Channel MemoryYou can memorize the channels you are watching frequently.SRS TrueSurround XTYou can enjoy dynamic and surround sound with ordinary speakers.Dolby DigitalWhen receiving digital broadcast signal, you can enjoy dynamic and surround sound with twoordinary speakers just like Dolby Digital 5.1.A Variety of Aspect RatiosYou can adjust the screen size at your preference.
GENERAL INFORMATIONENGLISH USER’S GUIDE
HYUNDAI FULL HD LCD TVGENERAL INFORMATIONTable of ContentsGeneral InformationSafety Precaution ................................................................5Contents of the Package .......................................................9Products Sold Separately ......................................................9Parts Names and Functions ................................................10Remote Control ...................................................................14Connections How to connect indoor/outdor TV Antenna(UHF/VHF) ...........16Before Connecting the Video/Audio Connections to External Device. ..............................................................................17How to Connect a VCR/Cable Receiverr ...............................18How to Connect a SET-TOP BOX or DVD Player ...................19How to Connect a Camcorder/Game Player .........................20How to Connect to a PC ......................................................21HDMI Connection ................................................................23How to Connect an External Visual Device ...........................25How to Use Digital Sound ....................................................26Channel SetupHow to Select TUNER MODE ................................................27How to Store Channels Automatically .................................28How to Add/Erase Channels Manually ................................29How to Set Channel Edit and Favorite Channels .................30How to See Signal Strength ................................................31How to Set The Input Mode .................................................32Picture SetupHow to Select the Picture Mode ..........................................33How to Set the Desired Picture ...........................................34How to Select the Aspect Ratio ...........................................35How to Watch PIP/POP ........................................................36Sound SetupHow to Select the Audio Mode ............................................38How to Adjust the Desired Audio Mode ..............................39How to Use the Automatic Volume Control ...........................40How to Listen to SRS TruSurround XT (Surround).................41How to Set Audio Language ................................................42How to Set the Digital Audio Output ....................................43Function SetupHow to Set Auto Lock .........................................................44How To Set Block By Rating.................................................46How to View Closed Captions...............................................48How to Set the EPG View ....................................................51How to View Reservation List...............................................52SetupHow to Set Date / Time........................................................53How to Set Power On Time ..................................................54How to Set Power Off Time..................................................55How to Set Sleep Time ........................................................56How to Choose Menu Language...........................................57How to Set Menu Opacity.....................................................58How to Set Emergency Alert ................................................59How to Set the Geometry in PC Mode...................................60Picture on Function Guide....................................................61AppendixHow to Use an Extemal Device Using the Remote Control ...62Glossary .............................................................................64Troubleshooting ..................................................................67Care and Cleaning ..............................................................69Product Specifications ........................................................70
5GENERAL INFORMATIONSafety Precaution The contents of this section are provided for the safety of users and their property.Please read the instructions carefully before using.Do not connect multiple electricalappliances to a single outlet.- It may cause a fire due to overheating fromthe outlet.Outdoor Antenna Grounding If an outside antenna or cable system is connected to the TV, be sure the antenna orcable system is grounded so as to provide some protection against voltage surgesand built-up static charges. Section 810 of the National Electrical Code, ANSI/NFPANo.70-1984, provides information about proper grounding of the mast and supportingstructure, grounding of the lead-in wire to an antenna discharge unit, size ofgrounding conductors, location of antenna discharge unit, connection to groundingelectrodes, and requirements for the grounding electrode.Example of Grounding According to National Electrical CodeInstructionDo not use or store a flammablespray or inflammable things near theTV.- They may cause explosion or fire.Do not install the TV in abookshelf, closet, or a place wherethere is poor air circulation.- Fire may be caused due to the rise ofinternal temperature.Make sure to remove the speakersbefore moving the TV with speakersmounted on it. - When the speakers are detached from theunit while carrying it, this may cause damageto the unit or personal injury. Any necessary action such as making theantenna cable loop at the entrance of thebuilding should be taken to prevent rainwateron the outdoor antenna cable from possiblyrunning into the indoor.- If raindrop gets into the LCD TV, it maycause a fire or an electric shock.
6HYUNDAI FULL HD LCD TVGENERAL INFORMATIONIf there is a persistent accumulationof dusts or water on the plug, pleasemake sure to wipe it off using a drycloth.- It may cause a fire or an electric shock.Firmly plug in the power cord so thatit does not pull out.- An unstable connection may cause fire.Do not use a damaged power cordor plug, or loose outlet.- It may cause electric shock or fire.Do not put a water bowl, vase,candle, bug repellant smoke,cigarette, plants, or heavy thing onthe TV.- It may cause electric shock or fire and alsoheavy things may cause injury when theyfall.Do not install in a place where thereis oil, smoke, excessive humidity, orwhere water may be sprinkled on it.- This may cause electric shock or fire.Do not install on an unstable placeor small support.- This may cause the TV to fall, resulting inserious injury to a child or adult.Never attempt to open, fix, or modifyyour TV.- When there is a need for fixing, call aservice center. Fire or electric shock may becaused.Do not put a metallic object like chopstick,wire, or puncher or inflammables like paperor a match in a vent, headphone jack, or AVjacks of the TV.- Electric shock or fire may be caused.When the TV produces abnormal noise,burning smell, or smoke, unplug the TVimmediately and call a service center.- Electric shock or fire may be caused.
7GENERAL INFORMATIONDo not place any heat sources such asradiators and heat registers, etc. near the TV.- It may cause a fire.Do not block ventilating slits with a tablecloth.- Blocking the ventilation slits may produceinner heat increase, resulting in a fire.Keep the TV at least 10cm away from thewall for ventilation.- Fire may be caused due to the rise of innertemperature.Do not allow children to climb or play on theTV.- If it falls over on children, it may causeserious injury.Do not place toys and cookies, etc. on the TV,which may attract children’s attention. - If it falls over on children, it may cause seriousinjury. When cleaning the TV, make sure todisconnect the power plug and use a dry, softcloth for a cleanup.- Please avoid using chemicals such as wax,benzene, alcohol, thinner, mosquito spray,air freshener, lubricant or syntheticdetergent.Unplug when you do not use your TV for along time.- If dust is stacked on the TV, electric shockor fire may be caused from heat, fire, ordeterioration of insulation.When moving the TV, two or more people areadvised to carry it.- Injury or damage may be caused when theTV falls.Never touch the power plug or outlet withwet hands. - This may cause electric shock.
8HYUNDAI FULL HD LCD TVGENERAL INFORMATIONDo not install the product on the floor.- This may cause the TV to fall resulting inserious injury.Unplug the product during lightning orthunderstorms and never touch the antennacable.- It may cause a fire or an electric shock.Keep the remote control batteries out ofsight and out reach of children.- If your child swallows a battery, see yourdoctor immediately.When replacing batteries, make sure tomatch the batteries to the (+) and (-) marksin the battery compartment.- Mismatching of polarities may result ininternal damage to batteries, fire due toleakage or contamination.Always use the standard batteries and avoidusing old batteries together with new ones.- Otherwise it may result in internal damageto batteries, fire due to leakage orcontamination.In the event of damaging or dropping theproduct, switch off the power and removethe plug.- Using a damaged product may cause anelectric shock or a fire.- Contact your local service center.Before moving the product, ensure to switchoff the power and unplug all the electricalcords and the external connection cords suchas an antenna cable and other sourceconnections, etc.- Electrical cords may be damaged, resulting ina fire or an electrical shock.Ensure the power cord doesn’t trailacross any hot objects like a heater.- This may cause a fire or an electric shock.Consult a service center or customer servicefor inside cleaning about once a year.- When dust is piled inside the TV for longtime, fire or malfunction may be caused.
9GENERAL INFORMATIONContents of the Packagehen opening the package, please ensure to check the following accessories provided. Products Sold Separately If you want to purchase separately sold products, consult a service center, electronics shops, or parts seller.Power CordAntenna Cable(coaxial cable) User's GuideRemote Control & 2 batteries(1.5V AAA)Hdmi cable Component Cable (Y, Pb, Pr)Composite Cable (Video/Audio)PC signal Cable (D-SUB)Audio Cable (PC)Audio Cable (DVD)Wall Mounting SupportS-video Cable
10HYUNDAI FULL HD LCD TVGENERAL INFORMATION* This product image may be a bit different from the actual product.Parts Names and Functions Front View - E425D/E465D- Power Indicator Status -Speaker Remote sensor and power LED.- Point the remote control toward here.- It displays standby or operation status.Power buttonUse this button to turn on or off the TV.Source buttonUse this button to switch among inputsconnected to the TV.Menu buttonUse this button to display or exit from menus.Select buttonUse this button to select each item of menu.Channel buttonsUse these buttons to change channels. Thesebuttons also serve as the cursor of Down andUp buttons when in Menu mode.Volume buttonsUse these buttons for your desired sound level.These buttons also serve as the cursor ofSelect/Adjust when in Menu mode.IndicatorRedGreenStatusStandbyPower on
11GENERAL INFORMATION* This product image may be a bit different from the actual product.Power(AC) input terminalconnect the power cord to thisterminalSPDIF optical digital audio outputterminalMini USB input terminalThis is used for picture on orservice check.Video output terminalAudio output terminalAV 1 (Video 1) input terminalAV 1 (Video 1) audio input terminalComponent 2 video input terminalComponent 1 video input terminalComponent 2 audio input terminalComponent 1 audio input terminaPC input terminalPC audio input terminalHDMI 1 input terminalHDMI 2 input terminalAntenna (Analgo/DTV) inputterminalAV 3 (S-Video) input terminalAV 2 (Video 2) input terminalAV 2 (Video 2) / AV 3 (S-Video)audio input terminalRS-232CThis is used for service check.Rear View - E425D/E465D
12HYUNDAI FULL HD LCD TVGENERAL INFORMATIONFront View - E426D/E466D* This product image may be a bit different from the actual product.- Power Indicator Status -Speaker Remote sensor and power LED.- Point the remote control toward here.- It displays standby or operation status.Power buttonUse this button to turn on or off the TV.Source buttonUse this button to switch among inputsconnected to the TV.Menu buttonUse this button to display or exit from menus.Select buttonUse this button to select each item of menu.Channel buttonsUse these buttons to change channels. Thesebuttons also serve as the cursor of Down andUp buttons when in Menu mode.Volume buttonsUse these buttons for your desired sound level.These buttons also serve as the cursor ofSelect/Adjust when in Menu mode.IndicatorRedGreenStatusStandbyPower on
13GENERAL INFORMATION* This product image may be a bit different from the actual product.Power(AC) input terminalconnect the power cord to thisterminalSPDIF optical digital audio outputterminalMini USB input terminalThis is used for picture on orservice check.Video output terminalAudio output terminalAV 1 (Video 1) input terminalAV 1 (Video 1) audio input terminalComponent 2 video input terminalComponent 1 video input terminalComponent 2 audio input terminalComponent 1 audio input terminaPC input terminalPC audio input terminalHDMI 1 input terminalHDMI 2 input terminalAntenna (Analgo/DTV) inputterminalAV 3 (S-Video) input terminalAV 2 (Video 2) input terminalAV 2 (Video 2) / AV 3 (S-Video)audio input terminalRS-232CThis is used for service check.Rear View - E426D/E466D
14HYUNDAI FULL HD LCD TVGENERAL INFORMATIONRemote Control 311. POWER/STANDBY2. MUTE/MagicThis button is also used when setting up to use other externaldevice.3. PIP FUNCTIONS- PIP : Use this button for PIP On/Off.- SOURCE: Use this button to select the input source of sub-picture.- SIZE : Use this button to select the size of sub-picture.- SWAP : Use this button to swap main and sub-picture.- POSITION : Use this button to select the position of sub-picture.4. A/D+- channel button5. Previous ChannelUse this button to return to the previous channel.6. Other external device selection7. MENU SELECTIONUse this button to select menu items.8. LEFT/RIGHT MOVE/ADJUSTUse these buttons to move between menu items or to adjusteach item.9. MENUUse this button to call the OSD to the screen.10. EXITUse this button to end the OSD.11. CHANNEL SELECTIONUse this button to select the channel.12-13. SUB-PICTURE CHANNEL SELECTION14. PC AUTOUse this button to automatically adjust the screen in PC Mode.15. DTV-GUIDEUse this button to see digital broadcast information.16. SRSUse this button to select 3D surround sound.17. SAPUse this button to listen in a foreign language or in Stereo
15GENERAL INFORMATION18. PICTURE MODE19. SOUND MODE20. BOOK-MARKUse this button to select/deselect your frequently-used channel.21. CC(Closed Caption)22. FAVORITE Use this button when watching your favorite channel.23. ADD/ERASEUse this button to add or erase channels.24. INFOMATIONUse this button to display resolution or various program information.25. SOURCEUse this button to select External Input 26. VOLUME27. FREEZE28. SLEEP29. ASPECT RATIOUse this button to change the picture size.30. NUMERIC KEYS31. Use this buttons to use other manufacturer’s DVD or VCR.How to Insert Batteries in Remote Control * Battery type :1.5V/AAAPress and hold Δpart and pushto open cover. Insert batteries with properpolarities of +and -.Use the remote control with coverclosed.
16HYUNDAI FULL HD LCD TVHow to connect indoor/outdor TV Antenna(UHF/VHF)Connection MethodMake sure that the antenna cable is connected to ANT.- Antenna or Cable service without a cable box connections- For optimum picture quality, adjust antenna direction if need,How to WatchTurn on TV to activate Auto Channel (See page 28) to memorize the available channels.Press button or button to select the desired channels.12- When inserting a 75 (ohm) coaxial cable into the input connection, ensure the wire tip not to bend.- If you experience poor signal reception, we recommend you purchase a signal amplifier for better picture quality.CONNECTIONS
17CONNECTIONS- When connecting an external device, ensure to read the connecting device’s manual. The location or the numberof the terminals on the external device may be different depending on its model. - Connect a HDMIconnection to the output of DVD, cable receiver or satellite receiver. Connecting a HDMIconnection to a PC may result in a message, “Unknown Signal”. - Do not power on until all necessary connections are made. If power is given before connections completed, thismay damage the product. - Make sure to match the cable in color with the terminal.- Make sure to check the type of terminals to be connected.Before Connecting the Video/Audio Connections to External Devices... Please make sure to read the following information on connection to enjoy best picture quality.Video/Audio connectorsTypes of video/audio cable :➀HDMI ➁ 15-Pin D-Sub ➂ COMPONENT ➃ S-VIDEO ➄ COMPOSITE Best picture quality is displayed in the following order.The superior picture quality starts from the far left side.
18CONNECTIONSHYUNDAI FULL HD LCD TVHow to Connect a VCR/Cable ReceiverConnection MethodConnect the Video cable or S-Video cable between Video/S-Video output terminal of VCR or Cable receiver andVideo/S-Video input terminal of TV. (Connect the jacks to terminals in the same color.)Connect the Audio cable (Left: white, Right: red) between Audio output terminal of VCR or cable receiver andAudio input terminal of TV. (Connect the jacks to terminals in the same color.)How to WatchTurn on TV and press on remote control and then select AV1/AV2/AV3banner on the botton side.For more information, read the user’s guide of VCR or cable receiver. 11To enjoy better picture quality, use the S-Video cable rather than the composite cable. Audio cableVideo CableVideo/Cable receiver2Audio cable
19CONNECTIONSHow to Connect a SET-TOP BOX or DVD PlayerConnection MethodConnect the Video cable (Y, Pb, Pr) between output terminals (Y, Pb, Pr) of DTV receiver or DVD player and theinput terminals (Y, Pb, Pr) of DTV/DVD (480i/480p/576i/576p/720p/1080i) on the rear of TV. (Connect the jacks to terminal in the same color.)Connect the Audio cable between Audio output terminal of DTV receiver or DVD player and Audio inputterminal for DTV/DVD Audio on the rear of TV. (Connect the jacks to terminals in the same color.)How to WatchTurn on TV and press on remote control until showing AV4/AV5 banner on the botton side.For more information, read the user’s guide of DTV receiver or DVD player.1- Output terminal mark (Y, Pb, and Pr) of DVD player may be indicated as Y, B-Y, R-Y/Y-Cb-Cr /Y-Pb-Pr accordingto the type of DVD player models.- If your DVD player or Set Top Box supports HDMI /D-SUB, see Connecting to a PC (page 21) for connection.You can enjoy more clear picture quality.1Audio cable2Video (Y, Pb, Pr) cableDTV receiver / DVD Player
20CONNECTIONSHYUNDAI FULL HD LCD TVHow to Connect a Camcorder/Game PlayerConnection MethodConnect the Video/S-Video cable between Video/S-Video output terminal of Camcorder/Game player andVideo/S-Video input terminal of TV. (Connect cables and terminal in the same colors.)Connect the Audio cable (Left-white, Right-red) between Audio output terminal of Camcorder/Game playerand Audio input terminal of TV. (Connect the jacks to terminals in the same color.)How to WatchTurn on TV and press on remote control and then AV1/AV2/AV3 banner on the bottom side.For more information, read the user’s guide of Game player or Camcorder.112Game PlayerCamcorderAudio cableVideo cable
21CONNECTIONSHow to Connect to a PCConnection MethodConnect the PC signal cable (15-pin D-sub) between the output terminal of PC and the D-sub input terminal ofTV.Connect the Audio cable between Audio output terminal of PC and Audio input terminal for PC on the rear ofTV. (Connect the jacks to terminals in the same color.)When Using as a PC MonitorTurn on TV and press on remote control until showing PC/HDMI1/HDMI2 banner on the bottom side.121HDMI CableAUDIO CableD-SUB Cabke- If you use the HDMI connection, you can enjoy better picture quality.- This product supports Plug-and-Play function.- We recommend the above method if the DVD player or set top box supports DTV signal with HDMI/D-Sub (15 pin)cable for the better picture quality.- If you input an unsupported resolution in PC or HDMI mode, the screen won’t be displayed properly.
22CONNECTIONSHYUNDAI FULL HD LCD TVResolution31.4737.5031.4737.8846.8848.3656.5060.0263.9067.50Vertical frequency(Hz)59.9475.0070.0860.3275.0060.0070.1075.0360.0060.00720 x 4001280 x 10241920 x 1080800 x 6001024 x 768640 x 480Horizontal frequency(KHz)Resolutions Supported in PC
23CONNECTIONSHDMI Connection HDMI *1 (High Definition Multi media Interface) is the first all digital consumer electronics A/V interface thatsupports uncompressed standard. The HDMI terminal supports both video and audio information.To the HDMIinput terminal, you can connect an EIA/CEA-861/861B*2 compliant consumer electronic device, such as a SetTop Box or DVD player with HDMI or DVI output terminal.Input a High-bandwidth Digital Content Protection(HDCP) high-definition picture source to this HDMI terminal, so you can display the high-definition pictures onthis TV in the digital form.Compatible VIDEO SignalThis input terminal is not intended for use with computers.Resolution1920 X 1080 p/i1280 X 720 p720 X 576 p/i640 X 480 p/iVertical scanning frequency(Hz)50/6050/6050/6050/601080 p/i720 p576 p/i480 p/iNo. of dots(HXV)HDMIHDMI CableSet Top BoxDVD PlayerIf the external device has DVIoutput only, use a DVI to HDMIadapter cable to connect to theHDMI terminal.
24CONNECTIONSHYUNDAI FULL HD LCD TVCompatible sampling freguency of AUDIO signal through HDMI (L.PCM) : 48kHz / 44.1kHz / 32 kHzNotes:• This HDMI connector is Type A.• If you connect an equipment without a digital output terminal, connect to the COMPONENT VIDEO, S VIDEO orVIDEO input terminal on the TV so you can enjoy an analog signal.• The DIGITAL IN terminal can only be used with 480i/576i/480p/576p/720p/1080i/1080p picture signals. Setthe Digital Set -Top -Box DIGITAL OUT terminal Output setting to 1080i, 1080p, 480i or 480p. For detailedinformation, refer to the Digital Set -Top -Box instruction manual. If you cannot display the picture becauseyour Digital Set -Top -Box does not have a DIGITAL OUT terminal Output setting, use the component VideoInput (or the S Video Input or Video Input). In this case the picture will be displayed as an analog signal.How to WatchTurn on TV and Press on remote control until showing HDMI1/HDMI2banner on the bottom side.- *1 HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMILicensing LLC.- *2 EIA/CEA-861/861B profiles compliance covers profiles for transmission of uncompressed digital videoincludinghigh bandwidth digital content protection.1
25CONNECTIONSHow to Connect an External Visual DeviceYou can connect your TV to other visual device to watch TV program at the same time.Connection MethodConnect the Composite Video cable between Video input terminals of an external device and the Video outputterminals for Video on the rear of TV.(Connect the jacks to terminals in the same color.)Connect the Audio cable between Audio input terminal (Left-white, Right-red) of an external device and Audiooutput terminal for Video on the rear of TV. (Connect the jacks and terminals in the same color.)For more information, read the user’s guide of an external device.123External Visual DeviceAudio CableVideo CableVideo and Audio outputs are available only when watching an Analog TV, Digital TV or VCR. This is not supportedin the Input Mode of Component, HDMI /D-SUB or S-Video.
26CONNECTIONSHYUNDAI FULL HD LCD TVHow to Use Digital SoundConnection MethodConnect the optical cable to the digital audio output terminal for SPDIF optical digital audio output terminal onthe rear of TV.Select Digital Sound Output. (See page 43)For more information, read the user’s guide of the external sound device.123SPDIF CableAmplifier with Built-in Dolby Digital AC3

Navigation menu