Hyundai IBT LT42DW000 LCD TV User Manual
Hyundai IBT Corp. LCD TV
Contents
- 1. User Manual 1
- 2. User Manual 2
User Manual 2
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 778342 |
| Application ID | AfsQfIvVCf6SACWLEjdzUA== |
| Document Description | User Manual 2 |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 140.33kB (1754113 bits) |
| Date Submitted | 2007-04-09 00:00:00 |
| Date Available | 2007-04-09 00:00:00 |
| Creation Date | 2007-04-02 16:50:05 |
| Producing Software | Acrobat Distiller 6.0 (Windows) |
| Document Lastmod | 2007-04-04 19:57:48 |
| Document Title | untitled |
FCC ID: PJILT42DW000 ATTACHMENT E. - USER’S MANUAL-2 - HYUNDAI CALIBRATION & CERTIFICATION TECHNOLOGIES CO., LTD. SAN 136-1, AMI-RI, BUBAL-EUP, ICHEON-SI, KYOUNGKI-DO, 467-701, KOREA TEL:+82 31 639 8517 FAX:+82 31 639 8525 www.hct.co.kr Report No. : HCT-F07-0310 1/1 How to Select TUNER MODE You can choose the RF-input between off-air and cable. Press Menu button. Menu items appear on the screen. CHANNEL Press up or down button to move to “channel”. Press or buttons to select “channel”. Press up or down button to move to Tuner Mode. Press or buttons to select Tuner Mode. Press up or down button to move to Air / Cable and press button to select item you want. Press MENU button after the setting is done and menu goes to the previous menu. If the EXIT button is pressed, the menu will disappear. 27 HYUNDAI FULL HD LCD TV How to Store Channels Automatically - Your TV can memorize and store all of the available analog/digital broadcast signals for both “off-air” (antenna) and cable channels. - Before your television can begin memorizing the available channels, make sure to specify the type of the signal source (antenna or cable) connected to your TV. Press Menu button. Menu items appear on the screen. CHANNEL Press Up or Down button to move to “channel”. Press or button to select “channel”. Press Up or Down button to move to “AUTO SCAN”. Press or button to select “AUTO SCAN”. Press button and Auto Scan is Activated - In the middle of AUTO SCAN, if you press button or Menu Button, AUTO SCAN is interrupted. Then the original channel is returned. - If you have changed the connection of an antenna or cable, perform AUTO SCAN again. 28 How to Add/Erase Channels Manually CHANNEL Users can add or erase the desired channels. 29 Press the number buttons on remote control to view the channels that will be added. To Add Channel , Add the channel by pressing the ADD/ERASE button. To Delete Channel, Press channel buttons or the number buttons on remote control to erase the channel. Press the ADD/ERASE button to erase the channel Press Left and Right buttons to set YES/NO . HYUNDAI FULL HD LCD TV How to Set Channel Edit and Favorite Channels Users can store frequently watched channels to quickly access a preferred channel. Press Menu button. Menu items appear on the screen. CHANNEL Press Up or Down button to move to “channel”. Press button or to select “channel”. Press Up or Down button to move to “channel edit”. Press button or to select “channel edit”. Press button to “select”. You can channel and Favorite-channels by pressing add/erase, Up/Down, left/right and buttons. Press MENU or exit button after the setting is done, and you can save the channels you select. How to Directly Add and Erase Favorite Channels : Press How to Directly See Favorite Channels : Press button. button. The Favorite function is available only with remote control. 30 How to See Signal Strength The function is only for DTV channel. Press menu button. menu items appear on the screen. CHANNEL Press Up or Down button to move to “channel” . Press or button to select “channel”. Press Up or Down button to move to “signal strength”. Press or button to select “signal strength” then the signal strength of anntena appears on the screen. Press MENU button after the setting is done and menu goes to the previous menu. If the EXIT button is pressed, the menu will disappear. 31 HYUNDAI FULL HD LCD TV How to Set The Input Mode Press Menu button. Menu items appear on the screen. CHANNEL Press Up or Down button to move to “channel”. Press or button to select “channel”. Press Up or Down button to move to “external input”. Press or button to select “external input”. Press left or right button to set input mode Whenever press left/right button to set input mode Changes in following order. TV(Air/Cable) AV1(Video1) AV2(Video2) AV3(S-Video) AV4(Component1) AV5(Component2) AV6(PC) AV7(HDMI1) AV8(HDMI2) Press Menu button after the setting is done and menu goes to the previous Menu. If the Exit button is prested, the menu will disappear. You can set the input mode quickly using the remote control press the button Whenever press this button, the input mode changes if following order TV(Air/Cable) AV1(Video1) AV5(Component2) AV6(PC) AV2(Video2) AV7(HDMI1) AV3(S-Video) AV8(HDMI2) AV4(Component1) 32 How to Select the Picture Mode Users can automatically adjust the picture mode according to the input mode. PICTURE Press Menu button. Menu items appear on the screen. Press Up or Down button to move to picture. Press or button to select picture. Press Up or Down button to move to picture mode Press or button to select Whenever you press Up or Down button, the mode changes in following order. Custom Standard Mild Vivid Multimedia Press MENU button after the setting is done and menu goes to the previous menu. If the EXIT button is pressed, the menu will disappear. CUSTOM : When the user wants to directly set the values See the next page STANDARD : Most video contents are appropriate to this mode MILD : Soft display VIVID: Clear and Vivid display MULTIMEDIA : For multimedia screen like movies How to Directly Select Picture Mode : Press Pricture button. - Whenever press this button, the mode changes in following order. MILD VIVID MULTIMEDIA. CUSTOM STANDARD - If the adjustment of Contrast, Brightness, Sharpness, Saturation and Tint is changed, it’s changed to the Custom mode automatically. 33 HYUNDAI FULL HD LCD TV How to Set the Desired Picture Users can manually adjust their desired picture. Press Menu button. Menu items appear on the screen. Press Up or Down button to move to picture mode. Press button or to select picture mode. Press Up or Down buttom to move to custom and Press button to make a selection. PICTURE Press Up or Down button to move to picture. Press or button to select picture. Press Up or Down buttom to move to Brightness . Press or button to select Brightness . Press Left or Right button to adjust. Press MENU button after the setting is done and menu goes to the previous menu. If the EXIT button is pressed, the menu will disappear. BRIGHTNESS : Adjust the brightness of the entire picture. CONTRAST : Adjust the brightness and darkness of object and background. SATURATION : Adjust colors into deeper or lighter colors. TINT : Adjust colors naturally. SHARPNESS : Adjust clarity of outline of objects. COLOR TEMP : Whenever You Press left or right button, the mode changes in following order NORMAL WARM COOL DNR : Reduce the Digital Noise in the DTV mode. AD.CONTRAST : Adaptive contrast TINT is not applied to PC mode 34 How to Select the Aspect Ratio Users can manually adjust size of the screen. 16 : 9 General broadcast picture is adjusted to 16:9. 4:3 4:3 general picture size ZOOM 1 PICTURE Picture enlarged to 16:9 format, letter box format. ZOOM 2 Picture which enlarges 16:9 vertically PANORAMA Picture size for panorama video REAL Real size in HDMI, Component How to Directly Select Picture Mode : Press Aspect button. You can use ASPECT key as follows. - Digital TV input : 16 : 9 4:3 Zoom 1 Zoom 2 - Analog TV input (in Video, TV mode) : 16 : 9 4:3 Zoom 1 Zoom 2 Panorama - PC mode : 16 : 9 4:3 - HDMI,COMPONENT Input : 16 : 9 4 : 3 Zoom 1 Zoom 2 Real what is Real Mode? - This Mode allows to show original display without over scanning when 1080i/p signal used in component/HDMI Input Mode. - According to inputted video sognal. Some noise can be displayed Mode on side of screen but this noise is originally from inputted video signal. 35 HYUNDAI FULL HD LCD TV How to Watch PIP/Double Window Press PIP button to set up PIP POP is selected whenever you pressbutton to select input source of sub screen. Select input source of sub screen by pressing Press PICTURE Press button and press OK button. button to adjust sub screen. Sub screen's size will change whenever you press. Press button to swap main and sub screen. Main and sub screen will be swapped whenever you press. Press button to change the position of sub screen. It moves left top Press right top right bottom left bottom buttons to select the channel of sub screen. Only in case sub screen's input is TV. Main and sub screen can't be used for same input sources. 36 Supported PIP Table PIP : O → Supported, X → Not Supported Sub TV VIDEO 1 VIDEO 2 S-VIDEO PICTURE 37 Component 1 Component 2 TV VIDEO 1 VIDEO 2 S-Video Component 1 Component 2 PC HMDI 1 HDMI 2 PC HDMI 1 HDMI 2 Main HYUNDAI FULL HD LCD TV How to Select the Audio Mode Users can adjust sound mode automatically as they want. Press Menu button. Menu items appear on the screen. Press Up or Down button to move to sound . Press or button to select sound . Press Up or Down button to move to sound mode Press or button to select sound mode. Mode is selected. Whenever you press Up or Down button, the mode changes in following order. CUSTOM STANDARD MOVIES MUSIC SPEECH CUSTOM : When the user wants to set the value. SOUND Press MENU button after the setting is done and menu goes to the previous menu. If the EXIT button is pressed, the menu will disappear. See the next page STANDARD : General sound mode. This fits most audio contents. MOVIES : For enjoying vivid sound. SPEECH : For enjoying clear sound. MUSIC : For enjoying original sound. How to Directly Select Sound Mode : Users can select Custom Standard Press SOUND button. Movies Music Speech 38 How to Adjust the Desired Audio Mode Users can adjust sound mode manually as they want. Press Menu button. Menu items appear on the screen. Press Up or Down button to move to sound mode Press or to select. Press Up or Down button to move to custom. and press button to make a selection. SOUND Press Up or Down button to move to sound. Press or button to move to sound. Press Up or Down to select items. (Table, Bass and blance) Press or button to select items. Move between the items listed using UP or Down button. Adjust the level of the item selected using Left or Right button. Press MENU button after the setting is done and menu goes to the previous menu. If the EXIT button is pressed, the menu will disappear. TREBLE: Adjusts the range size of high sound. BASS: Adjusts the range size of low sound. BALANCE : Adjusts the balance of left and right speakers. 39 HYUNDAI FULL HD LCD TV How to Use the Automatic Volume Control With this Automatic Volume Level Control, everything you watch will always maintain the volume level that you decide. Basically it is set to “ON” Press Menu button. Menu items appear on the screen. Press Up or Down button to move to sound . Press or button to select sound . Press Up or Down button to move to AVL. Press or button to select AVL. Press Press or button to set to on/off. button to set to on/off. SOUND Press MENU button after the setting is done and menu goes to the previous menu. If the EXIT button is pressed, the menu will disappear. If the SRS TruSurround XT function is activated, the AVL is disabled. 40 How to Listen to SRS TruSurround XT (Surround) Users can enjoy spectacular 3D sound. Press Menu button. Menu items appear on the screen. Press Up or Down button to move to sound. Press or button to select sound. Press Up or Down button to move to Surround. Press or button to select Surround. Press Left and Right buttons to set to ON/OFF . SOUND Press MENU button after the setting is done and menu goes to the previous menu. If the EXIT button is pressed, the menu will disappear. How to Directly Select Surround : Press the - User can select TruSurround XT ON button. TruSurround XT OFF is a trademark of SRS Labs, Inc. TruSurround XT technology is incorporated under license from SRS Labs, Inc. 41 HYUNDAI FULL HD LCD TV How to Set Audio Language While watching a digital program, you can listen to foreign language if the program is supported with foreign language. Press Menu button. Menu items appear on the screen. Press Up or Down button to move to sound . Press or button to select sound . Press Up or Down button to move to Pref.Aud.Lang . Press or button to select Pref.Aud.Lang . Whenever you press Left or Right button, the mode shifts in following order. ENGLISH SPANISH FRANCE How to Directly Select Audio Language : Press the SOUND Press MENU button after the setting is done and menu goes to the previous menu. If the EXIT button is pressed, the menu will disappear. button. - Whenever you press this button, the mode shifts MONO STEREO SAP in order when receiving analog signals. You can select one of the languages listed you prefer when receiving digital signals. 42 How to Set the Digital Audio Output The digital audio output terminal allows you to enjoy digital sound. Press Menu button. Menu items appear on the screen. Press Up or Down button to move to sound . Press or button to select sound. Press Up or Down button to move to “Dig.Audio Out” Press or buttons to select “Dig.Audio Out” Whenever you press Left or Right button, the mode shifts in following order. Dolby PCM SOUND Press MENU button after the setting is done and menu goes to the previous menu. If the EXIT button is pressed, the menu will disappear. Manufactured under license from Dolby Laboratories. “Dolby Digital” and the double-D symbol are trademarks of Dolby Laboratories. 43 HYUNDAI FULL HD LCD TV How to Set Auto Lock This function is used to prevent from using the control buttons on the front top of the TV or from connecting external devices to the TV. You make sure to set a PIN number to use this function. Press Menu button. Menu items appear on the screen. Press Up or Down buttons to move to “AUTO LOCK”. Press or button to select “AUTO LOCK”. Then the Enter PIN number window appears. The default is 4 digits (0-0-0-0). - To set Blocking : Press Up or Down button to move to “SET BLOCKING”. Press or button to select “SET BLOCKING” FUNCTION Press Up or Down button to move to function . Press or button to select function . Press Up or Down button to move to ON/OFF . Press button to make a selection. - To set Channel blocking : Press Up or Down button to move to “CHANNEL BLOCKING”. Press button to select “ BLOCK CHANNEL”. Then the AUX BLOCK items appear. Press Up or Down button to move to the item you want. Press button to set to LOCK/UNLOCK . If the item is set to ON, such item is disabled. Continued on next page ...... 44 Continued from previous page..... (Set the Lock External Signal function.) 10 - To update DTV rating : Press Up or Down button to move to “DTV Rating”. Press button to select “DTV Rating”. - To set setup code : Press Up or Down button to select “SETUP CODE”. Press button to select “SETUP CODE” Then the Enter PIN number window appears. Enter a 4- digit PIN number. When the Confirm PIN number window appears, enter the PIN number again. FUNCTION Press MENU button after the setting is done and menu goes to the previous menu. If the EXIT button is pressed, the menu will disappear. If you forgot your PIN number, Enter a 4-digit number (0-7-1-1)twice in the pin number window. 45 HYUNDAI FULL HD LCD TV How To Set Block By Rating This(V-Chip) is used to block program viewing based on the ratings sent by the broadcasting station. The default setting is to allow all programs to be viewed. Viewing can be blocked by the type of program and by the categories chosen to be blocked. V-Chip rating and categories Rating guidelines are provided by broadcasting stations. Most television programs and television movies can be blocked by TV Rating and/or Individual Categories. Movies that have been shown at the theaters or direct-tovideo movies use the Movie Rating System (MPAA) only. Ratings for Movies previously shown in theaters : Movie Ratings : - Blocking Off (Permits all programs) -G (General audience) - PG (Parental guidance suggested) - PG-13 (Parents strongly cautioned) -R (Restricted) - NC-17 (No one 17 and under admitted) -X (Adult only) - NR (Not Rated) If you set PG-13 : G and PG movies will be available , PG-13, R, NC-17 and X will be blocked. Ratings for Television programs including made-for-TV movies : (General audience) (Parental guidance suggested) (Parents strongly cautioned) (Mature audience only) (All children) (Children 7 years older) TV Rating Children : - Age - Fantasy Violence FUNCTION - TV-G - TV-PG - TV-14 - TV-MA - TV-Y - TV-Y7 (applies to TV-Y, TV-Y7) (applies to TV-Y7) TV Rating General : - Age - Dialogue-sexual dialogue - U Language-adult language - Sex-sexual situations - Violence (applies to TV-G, TV-PG, TV-14, TV-MA) (applies to TV-PG, TV-14) (applies to TV-PG, TV-14, TV-MA) (applies to TV-PG, TV-14, TV-MA) (applies to TV-PG, TV-14, TV-MA) Continued on next page ...... 46 Press Menu button. Menu items appear on the screen. FUNCTION Press Up or Down button to move to Auto Lock. Press or button to select Auto Lock. The message “Enter PIN” will appear. Enter your 4-digit PIN number. Press Up or Down button to move to “BLOCK BY RATING” and press buttons to make a selection. The new screen will appear. Press Up/Down and left/right buttons to select the items (MPAA and TV Parental midelines) Press up/down and left/right buttons to select the item. Press button to make a selection. Press MENU button after the setting is done and menu goes to the previous menu. If the EXIT button is pressed, the menu will disappear. 47 HYUNDAI FULL HD LCD TV How to View Closed Captions Choices in the closed caption menu are : CC Mode, Priority (Analog caption or Digital caption), and Option. 1. CC MODE : Always On : Captioning information is always shown, when available. Off : No captioning information is displayed. On When Muted : Captioning information is shown, when mute. 2. PRIORITY : You can choose whether the TV uses digital or analog captions for digital TV programs that have both or either. - ANALOG (CAPTION) : You can select a closed caption mode, which is the mode, or source, used for displaying captioning information for analog channels or digital channels, if available. • CAPTION : The form for the words that scroll across the bottom of the TV screen : usually the audio portion of the program provided for the hearing impaired. CC 1 : For video related information that can be displayed. Script can be in any language. CC 2/3/4 : Other modes used for video related information. • TEXT : The term for the words that appear in a large black frame and almost cover the entire screen : Usually message provided by the broad caster. T1 FUNCTION : Blanks out a large portion of the picture on the television screen, and display program guide or any other information currently being transmitted. T 2/3/4 : other modes that display information and blank out a large portion of the picture of the TV screen. - DIGITAL (CAPTION) : You can select a closed caption, service mode(1-6) for digital channels. The service modes support MPEG-2 based transport sources Service 1 and Service2 are the primary and secondary languages, respectively. Service3 and service4.5.6 are additional caption sources that may be available. Continued on next page ...... 48 ...... Continued from previous page. 3. OPTION : Customized closed captioning for the digital caption by choosing the settings for the following options : 1) Caption Text CAPTION SIZE : Set the size of the words - AUTO -> SMALL -> STANDARD -> LARGE CAPTION STYLE : Set the style of the words - AUTO -> STYLE1 -> STYLE2 -> STYLE3 -> STYLE4 -> STYLE5 -> STYLE6 ->STYLE7. TEXT COLOR : Choose a color for the text - AUTO -> BLACK -> WHITE -> RED -> GREEN -> BLUE -> YELLOW -> MARGENTA -> CYAN TEXT OPACIFY : Specify the opacity for the text - AUTO -> SOLID -> TRANSPARENT -> TRANSLUCENT -> FLASHING EDGE STYLE : Select Edge style for the text - AUTO -> NONE -> RASIED -> DEPRESSED -> UNIFORM -> L-DROPSHADOW -> R-DROPSHADOW EDGE COLOR : Select Edge color for the text - AUTO -> BLACK -> WHITE -> RED -> GREEN -> BLUE -> YELLOW -> MARGENTA -> CYAN ITALIC : Convert the text in to italic - AUTO -> ON -> OFF UNDERLINE : Add the underline to the text - AUTO -> ON -> OFF 2) cc Background COLOR : Set the color of the cc Background AUTO -> BLACK -> WHITE -> RED -> GREEN -> BLUE -> YELLOW -> MARGENTA -> CYAN FUNCTION OPACIFY : Specify the opacity for the - AUTO -> SOLID -> TRANSPARENT -> TRANSLUCENT -> FLASHING Press Menu button. Menu items appear on the screen. Press Up or Down button to move to function and press or to select function. Press Up and Down buttons to move to “CLOSED CAPTION” and press or to make a selection. Display MODE is highlighted. Press Left and Right buttons to select Off" or "Always On" or "On When Muted". Sub menu items are activated. 49 button Press Up or Down button to move the item. Press Left or Right button to select the item. HYUNDAI FULL HD LCD TV - To select caption option Press Up or Down button to move to caption option. Press or button to select caption option. Press left/right buttons to select Auto/Option and press to select make a selection. If caption option selected options, CC Background and caption Text are highlighted When selectiong the CC Background and caption text, press button. Press Up or Down button to move between the items (cc Background and Caption text) Press left/right buttons to select the item Then you can choose the CC Background and caption text by pressing up/down and left/Right buttons. Press MENU button after the setting is done and menu goes to the previous menu. If the EXIT button is pressed, the menu will disappear. FUNCTION 50 How to Set the EPG View - This service is only for DTV model. Press Menu button. Menu items appear on the screen. Press Up or Down button to move to function. or button to select function. Press Press Up or Down button to move to EPG View. Press or button to select EPG View. or button to see the EPG. Press Then you can get information on the broadcasting time and program. Press Up or Down button to select the program for reservation. Press to reserve the selected program. If reserved, clock mark will appear on the program. FUNCTION Press MENU button after the setting is done and menu goes to the previous menu. If the EXIT button is pressed, the menu will disappear. How to Directly Move to EPG : Press the Five programs can be reserved. 51 button. HYUNDAI FULL HD LCD TV How to View Reservation List Press Menu button. Menu items appear on the screen. Press Up or Down button to move to function. or button to select function. Press Press Up or Down button to move to Reserv. List . Press or button to select Reserv. List . Press or to activate Reservation List. If you reserved programs, Reservation List will appear. If not, No program schedule will appear. To cancel reserved programs, move to Reservation List and press to cancel. The clock symbol will disappear. FUNCTION Press MENU button. If the message "Do you want to save ?" appears, select Yes. After saving, Reservation List will disappear. 52 How to Set Date / Time Press Menu button. Menu item appear on the screen. Press Up or Down button to move to setup . Press or button to select setup. Press Up or Down button to move to “DATE/TIME” . Press or button to select “DATE/TIME”. SETUP Press or button to select “Observe or Do not observe”, DayLight Saving Time. Press button to select function Press left/right buttons to timezone. Whenever you press the buttons, timezone is changed in following order. Pacific Mountain Central Eastern Alaska Hawaii Atlantic Press button to select “SETTING”. Press Up or Down button to move to manual manually. Press button to set the current “DATE/TIME” Press Up/Down and Left/Right buttons to set year, month, day, Hour, Minute and AM/PM After setting, Press or button to exit “AUTO” is only for DTV mode. If you select “AUTO”, or button to select function Press Press MENU button after the setting is done and menu goes to the previous menu. If the EXIT button is pressed, the menu will disappear. 53 HYUNDAI FULL HD LCD TV How to Set Power on Time - Yes can automatocally turn on or off the TV at a present time, To do this, you must set the time it you wish to use the automatic on or off timers Press Menu button. Menu items appear on the screen. Press Up or Down button to move to setup. Press or button to select setup. Press Up/Down button to select power on time Press or button to select power on time. Press button to activate power on time whenever you press left and right button, the mode shifts in following order OFF ONCE DAILY If you select once or daliy in the “ACTIVATE” You can set time and channel Press Up/Down buttons to select channel. Press button to set channel. Press numeric key to set channel number. Press button to set. SETUP Press up/down button to select Time. Press button to set Time. Press Left or Right button to move between Hour, minute and AM/PM and press up or down buttons to set Hour, minute and AM/PM Press MENU button after the setting is done and menu goes to the previous menu. If the EXIT button is pressed, the menu will disappear. 54 How to Set Power Off Time Press Menu button. Menu items appear on the screen. Press Up or Down button to move to setup Press or button to select setup. Press Up/Down button to move to power off time Press or button to select power off time. Press button to activate power off time. Whenever you press left and right button, the mode shift in following order. OFF ONCE DAILY If you select once or daily in the “ACTIVATE” You can set time. SETUP Press Up/Down buttons to select time. Press button to set time. Press Left or Right button to move between hour, minute and AM/PM Press Up or Down buttons to set hour, minute and AM/PM. Press button to set. Press MENU button after the setting is done and menu goes to the previous menu. If the EXIT button is pressed, the menu will disappear. 55 HYUNDAI FULL HD LCD TV How to Set Sleep Time Press Menu button. Menu items appear on the screen. Press Up or Down button to move to setup Press or button to select setup. Press Up or Down button to move to sleep time. Press or button to set sleep time. Press up or down button to set sleep time Whenever you press up or down button the mode shifts in following order. OFF 15 30 45 60 90 120 180 240 MINUTES Press button to set. Press MENU button after the setting is done and menu goes to the previous menu. If the EXIT button is pressed, the menu will disappear. SETUP How to Directly Set the sleep timer : Press the - Whenever press this button, the mode shifts off 180 240 minutes button. 15 30 45 60 90 120 56 How to Choose Menu Language Users can select their language preference in order to display main menus and sub menus, etc. Press Menu button. Menu items appear on the screen. Press Up or Down button to move to setup. Press or button to select setup. Press up/down button to move to menu language. Press or button to select menu language. Press or button to set language Whenever you press Left or Right button, the mode shifts in following order. ENGLISH SPANISH FRENCH SETUP Press MENU button after the setting is done and menu goes to the previous menu. If the EXIT button is pressed, the menu will disappear. 57 HYUNDAI FULL HD LCD TV How to Set Menu Opacity Users can select their language preference in order to display main menus and sub menus, etc. Press Menu button. Menu items appear on the screen. Press Up or Down button to move to setup. Press or button to select setup. Press Up or Down button to move to move to menu opacify. Press or button to select menu opacity. Press left or right to set menu opacity you want. Press MENU button after the setting is done and menu goes to the previous menu. If the EXIT button is pressed, the menu will disappear. SETUP 58 How to Set Emergency Alert Press Menu button. Menu items appear on the screen. Press Up or Down button to move to setup . Press or button to select setup Press Up or Down button to move to Energ Alert. Press or button to select Energ Alert. Press Up or Down button to move to Low/medium. Press left or right button to select present/discard. SETUP Press MENU button after the setting is done and menu goes to the previous menu. If the EXIT button is pressed, the menu will disappear. 59 HYUNDAI FULL HD LCD TV How to Set the Geometry in PC Mode This function is only available in PC mode. Press Menu button. Menu item appear on the screen. Press Up or Down button to move to setup. Press or button to select setup. Press Up or Down buttons to move to “PC”. Press or button to select “PC”. Press Up and Down buttons to move to “Auto Adjustment”. Press or button to adjust H/V-position auto. Press Up and Down buttons to move to “TRACKING”. After pressing OK button, you can select Phase, Clock with Up or Down button and change the value with Left or Right button. Press Up and Down buttons to adjust V-position . Press or button to adjust H-position. After setting press button to exit SETUP Press Up or Down button to move to position. Press or button to select position. Press MENU button after the setting is done and menu goes to the previous menu. If the EXIT button is pressed, the menu will disappear. H. POSITION : To adjust the horizontal position of the picture. V. POSITION : To adjust the vertical position of the picture. If the display input signal (resolution) has been changed, the picture will be automatically optimized. 60 Picture On Function Guide Picture on function allowing users to set the customized display image on initial TV power on screen. Open your image editor software to open your desire image file. 2) Using your software tool, resize the image pixel to 960 x 550. 3) Set your image color to hi-color (16bit). 4) Select ‘Save As’ on menu and change the image file to “logo.bmp” then save it. 5) Create new file folder name “DDM40” on your USB drive. Copy your “logo.bmp” file to DDM40 directory. Then connect your USB driver to TV by using mini USB cable on LED in Red (Standby mode). 6) Turn on your TV using the Power ON from the remote controller. Then the file is loaded automatically. 7) When you see “SPLH: OK” screen, Turn OFF TV using OFF button on the remote controller. 8) Disconnect the Mini USB cable from the TV and Power ON the TV. 9) Initial power on screen is set and now you can view your selected image. SETUP 1) - Requirements : File Format - Bit Map(*.BMP) / Image pixel size - 960X540 / BIT- 16bit Free image editor software’s can be downloading at the www.download.com Recommended USB Drive - SanDisk Cruzer, Micro USB Flash Drive 256Mb, Hana Micro 61 HYUNDAI FULL HD LCD TV How to Use an External Device Using the Remote Control When setting other manufacturer s product using the remote control, some of the buttons on the remote control may not operate or different functions may be activated, or some of other manufacturer s products may not work. Some of DVD/VCR combos are allowed only either in DVD mode or VCR mode. 1. Turn on the external device you want to set. 2. Whenever you press VCR DVD Or Press the button on the remote control, the mode shifts SAT(Satellite Receiver) TV in order. button and the prefered device(TV/VCR/DVD/SAT) at once. 3. If the external device has been chosen, press the at the same time for two seconds. button and button 4. Enter an appropriate 3-digit number of the manufacturer from the DVD Setting Number Table. (If the product brand you want to set has multiple setting numbers, attempt to enter the setting numbers repeatedly until the product is turned off.) 5. When the product has turned off, press the button again. (The appropriate button associated with the product will flash 3 times to show the product operates properly.) 6. Check that the Power button works normally and then check that other function buttons work normally. If the Power button works normally but other function buttons do not, repeat the above steps from the beginning. Depending on product brands or setting numbers, the power button may work normally but other function buttons do not work. VCR Setting Number Table APPENDIX 62 DVD Setting Number Table APPENDIX Satellite Receiver Setting Number Table 63 HYUNDAI FULL HD LCD TV Glossary 1 Component video Component video is sent through three cables: two color shade (chrominance) signals and one brightness (luminance) signal. Component video achieves greater color accuracy than composite video or S-VIDEO by splitting chrominance into two separate portions. Composite video Composite video is sent through a single cable. Composite video combines the color shade (chrominance) and brightness (luminance) information into one video signal. S-VIDEO S-VIDEO requires a single cable, which carries the brightness (luminance) and color (chrominance) signals of the picture separately. S-VIDEO provides better resolution than composite video, which carries the signals together. 480i Provides 480 lines of resolution. Displays images using interlaced scanning, which first transmits all the odd lines on the TV screen and then the even lines. 480p Provides 480 lines of resolution. Displays images using progressive scanning, which transmits each line from top to bottom. 720p Provides 720 lines of resolution. Displays images using progressive scanning, which transmits each line from top to bottom. 1080p Provides 1080 lines of resolution. Displays images using progressive scanning, which transmits each line from top to bottom. 1080i Provides 1080 lines of resolution. Displays images using interlaced scanning, which first transmits all the odd lines on the TV screen and then the even lines. 1080i is one of the formats used by HDTV (High Definition TV). Digital television (DTV) HDTV(High Definition TV) Cable Broadcast Receiver (Converter) Satellite Broadcasting VHF/UHF HDTV is a new kind of digital TV, creating a high quality picture, high definition. The HDTV provides a theater-like screen with an aspect ratio of 16:9. Supports 720p or higher. APPENDIX SDTV(Standard Definition TV) A new technology for transmitting and receiving broadcast television signals. DTV provides higher resolution and improved sound quality over analog television. SDTV is a new kind of standard definition digital TV, having a range of lower resolution than the HDTV. Supports 480i. A device that receives cable broadcasting. Connecting it to your TV set allows you to watch a various channels. Provides crisp picture and clear audio quality throughout the country via a satellite. VHF (Very High Frequency) is the part of the frequency spectrum from 30 to 300 megahertz. UHF (Ultra High Frequency) is the part of the frequency spectrum from 300 to 3,000 megahertz. 64 Glossary 2 DVD Coaxial Cable Coaxial cable is the kind of rounded copper cable, which is generally used for TV antenna. Aspect ratio Refers to the ratio between the width and height of the screen. This TV has a 16:9 (widescreen) aspect ratio, as opposed to a 4:3 aspect ratio. Picture Mode Picture Mode features the optimal picture quality. There are Standard-Mild-Vivid Multimedia-Custom features in order. “CUSTOM” allows you to adjust Contrast, Brightness, Sharpness, Color and Tint. Sound Mode Video and Audio signals digitized and transmitted by broadcasting companies complying with the new digital television standard developed by the ATSC (Advanced Television System Committee). Digital Broadcasting technology provides multimedia services including a variety of additional services as well as high-definition quality picture. Analog Broadcasting ATSC-based Video and Audio signals transmitted by broadcasting companies. SRS TruSurround TX A well-recognized 3D sound technology developed by US SRS Labs, Inc. This technology delivers the ultimate audio experience only with two speakers as if through multi-channel speakers. Mono APPENDIX Sound Mode features the optimal sound quality. There are Standard-Movies-SpeechMusic features in order. “CUSTOM” allows you to adjust high frequency sound, middle frequency sound and low frequency sound. Digital Broadcasting Dolby Digital Stereo 65 DVD (Digital Versatile Disc) is an optical disc that can store a huge volume of multimedia such as video, game, and audio application, etc. Formerly known as AC-3, Dolby Digital is a digital audio coding technique that reduces the amount of data needed to produce high quality sound. Audio signals are produced through a single channel. It is difficult to experience a spectacular sound since audio signals are reproduced with a single speaker. Audio signals are produced through two channels. A spectacular sound is reproduced with two separated speakers. Widescreen Term given to picture displays with a wider aspect ratio than NTSC 4:3. Digital HDTV is 16:9 widescreen. Most motion pictures also have a widescreen aspect ratio, some even wider than 16:9. External source Refers source signals that come from other external devices such as a VCR, camcorder and DVD player, etc. than a TV set. HYUNDAI FULL HD LCD TV Glossary 3 MTS A bilingual service provided when an overseas film, foreign drama or overseas news, etc. is aired. You can select one of two choices: mother tongue and foreign language. Or you can listen to both languages at the same time. DVI Digital Visual Interface is a specification for digital signals. This interface using TMDS transmission reduces the loss of signal, allowing to enjoy a clear and crisp image. HDMI Virtual channels HDMI (High-Definition Multimedia Interface) is the first and only industry-supported, uncompressed, all-digital audio/video interface. HDMI provides an interface between any audio/video source, such as a set-top box, DVD player, or A/V receiver and an audio and/or video monitor, such as a digital television (DTV), over a single cable. There is a new numbering system for DTV channels. The system, called the “DTV virtual channels,” gives a number for each DTV program service, and almost always uses the analog NTSC channel number as the first number for that station. The use of virtual channels allows stations to use the same channel number “brand” for both NTSC and DTV. The printed listing services have not yet changed their format to show only the DTV virtual channel numbering system. So in the example, the station is using RF Channel 38 for DTV and is transmitting DTV programs with virtual channel numbers 15.n. The 15.n is short hand for 15.1, and 15.2 and 15.3, etc., as there can be more than one DTV program lineup from the station. So, 15.1 is the first DTV program lineup, 15.2 is the second, 15.3 is the third. Some DTV stations may have only one virtual channel, others perhaps as many as six. APPENDIX 66 Troubleshooting Installation Problems Symptom Possible solution How can I install an antenna? Refer to page 16. TV screen is not clear after installing an indoors antenna. How can I view cable broadcasting? Indoors antenna may experience poor reception due to surrounding buildings. Please install an outdoors antenna or wireless antenna. Please install a cable broadcasting receiver (Converter). Picture Problems Symptom Neither picture nor sound comes up. Picture turns on slowly after power is on. Picture is distorted or frozen while watching digital broadcasting. APPENDIX Input Source information only appears on black screen. Poor reception on some channels. Black and white on some channels. TV won’t turn on. Screen is too bright or too dark. 67 Possible solution Check whether power is on. Check whether the power is cut or whether power cord is properly connected. Try to plug another product’s power cord to the outlet the TV is plugged into. This symptom is not a malfunction. This delay is designed to prevent the distorted and noisy picture when power is on. However, if the picture does not appear more than 5 minutes after power is on, call a service center. This symptom may be caused by weak reception. Contact your local station or cable company. Check whether your TV is properly connected to external devices. Check whether you selected proper channels. Try re-orienting your antenna. Check other channels for black and white screen. Adjust colour. Ensure the power cord is plugged. Adjust brightness. HYUNDAI FULL HD LCD TV Auto On does not work. Ensure to use the remote control or power button on the product to turn off your TV. If you unplug the power cord, the stand-by consumption power becomes 0 (zero), which causes the programmed time to be erased. After setting the time, I turned TV off and turn it on. The programmed information has been erased. Ensure to use the remote control or power button on the product to turn off your TV. If you unplug the power cord, the stand-by consumption power becomes 0 (zero), which causes the programmed time to be erased. Sound Problems Symptom Too much noise occurs. No sound while viewing a cable channel Possible solution Check whether the audio setting is in the Stereo mode. In the Stereo mode, the sound may be distorted in the area where experiences poor reception or is located far away from a TV broadcasting station. Make sure an audio or audio/video component is securely inserted into the appropriate jacks. Check other channels for sound. Check the volume settings on the cable broadcasting receiver. Picture is OK but sound does not come out. Try to press volume up/volume down buttons of your remote control. Try to press MUTE buttons of your remote control. One of the speakers does not produce sound. Select sound balance and make proper adjustment. (Page 39) Check the speaker connection cables. General Symptom Possible solution Check whether there is a blocking object between the remote control and TV. Make sure your TV is Power On. (In case of normal, LED on the front panel is in Red.) Check whether batteries are inserted with proper polarities(+, -). When the batteries are worn out, replace with new ones. Where does the S-Video cable plug in for audio output? Connect the two Audio jacks from the S-Video cable to the left and right ports on the Composite. Strange noises are heard. Ticking noise during or after watching is caused by the change of ambient environment such as humidity and temperature, which is characterized by plastic products. Strange ticking noise occurs because a signal is suddenly transmitted to the TV panel. So, this is not a malfunction. I tried to use the TV screen as a PC monitor but it doesn’t work. Adjust the resolution referring to the standard signal mode table. Check the specification of your video card installed in your PC. If your video card does not work in supported hardware. Try upgrading the video card’s driver. APPENDIX Remote control won't work. 68 Care and Cleaning Cabinet Cleaning Wipe a soft dry cloth. Do not use inflammables like Benzene or Thinner, or wet clothes. Do not scratch the panel of LCD with a fingernail or pointed object. Screen Cleaning Clean the screen with a soft cloth moistened in mild glass detergent and dry with a soft cloth. Never use any solvent on the screen such as Acetone, Benzene, or Thinner, etc. Cleaning Inside When the inside needs to be cleaned, contact a service center or distribution agent where the item is purchased. APPENDIX It is recommended cleaning is complete before the rainy season. 69 HYUNDAI FULL HD LCD TV Product Specifications - E425D/E465D E425D E465D S-Video 1(A/V audio common) 1(A/V audio common) Video (RCA) 2(Audio included) 2(Audio included) Component(Y/Cb/Cr) 2(Audio included) 2(Audio included) Antenna PC Connection jack D-SUB D-SUB Max. resolution 1920 X1080 @ 60 Hz 1920 X 1080 @ 60 Hz Audio L/R L/R HDMI Memory Slot No No Video Audio 2(L/R, SPDIF) 2(L/R, SPDIF) Analog NTSC M / FM NTSC M / FM Digital ATSC ATSC Video system Component, S-Video, Composite, PC, HDMI Component, S-Video, Composite, PC, HDMI Supply AC 100 - 240 V, 50/60 Hz AC 100 - 240 V, 50/60 Hz Consumption power 200W (Typical ) 260W (Typical ) Stand-by power < 1W < 1W Dimension (W x D x H mm - Stand included) 1057 x350 x 796 1143 x350 x 845 Weigh (Stand included) 32.6 Kg 31.5 Kg Control type Remote control, Key control Remote control, Key control Model Input Output TV/Video Power - The above specifications may be subject to change without prior notice. APPENDIX 70 Product Specifications - E426D/E466D E426D E466D S-Video 1(A/V audio common) 1(A/V audio common) Video (RCA) 2(Audio included) 2(Audio included) Component(Y/Cb/Cr) 2(Audio included) 2(Audio included) Antenna PC Connection jack D-SUB D-SUB Max. resolution 1920 X1080 @ 60 Hz 1920 X 1080 @ 60 Hz Audio L/R L/R HDMI Memory Slot No No Video Audio 2(L/R, SPDIF) 2(L/R, SPDIF) Analog NTSC M / FM NTSC M / FM Digital ATSC ATSC Video system Component, S-Video, Composite, PC, HDMI Component, S-Video, Composite, PC, HDMI Supply AC 100 - 240 V, 50/60 Hz AC 100 - 240 V, 50/60 Hz Consumption power 200W (Typical ) 260W (Typical ) Stand-by power < 1W < 1W Dimension (W x D x H mm - Stand included) 1237 x310 x 708 1323 x310 x 757 Weigh (Stand included) 32.6 Kg 31.5 Kg Control type Remote control, Key control Remote control, Key control Model Input Output TV/Video Power APPENDIX - The above specifications may be subject to change without prior notice. 71 HYUNDAI IT SERVICE CENTER Germany/Austria/Benelux Sw/Fi/De POLAND Hyundai IT Germany SVC Hessenring 13B D-65546 Mörfelden-Walldorf Germany Tel Total : 0049 (0) 6105 4088 211 IT : 0049 (0) 180 50 70113 TV : 0049 (0) 180 59 13 134 e-mail : oezer.oeguen@ hyundai-service.eu Attn : Oezer Oeguen A Novo Nätverksgränd 11, 721 36 Västerås Sweden Tel : 0046 21812310 e-mail : andreas.gerhardsen@anovo.se Attn : Andreas Gerhardson Zolter Sp. z o. o. Piaseczno 05-500 ul.żoytnia 1 Tel : 0048 (0) 22735 54 30 e-mail : A.Gorayski@zolter.com.pl Attn Antoni Gorayski France SERRIB 25 rue Albert Camus BP355, 90006 BELFORT Cedex Tel - IT : +33 (0) 4-70-58-44-11 TV : +33 (0) 4-70-58-44-02 e-mail : g.demeusy@serrib.com Attn : Gilles Demeusy UK RepairTech Ltd Unit 5, Westfield Road, Southam, Warwickshire, CV47 0JH Tel : 0871 855 3171 e-mail : john.satchwell@ repairtech.co.uk Attn : John Satchwell SLOVENIA Spain Seltron, S.L. C/INDUSTRIA,44-46 Tel : 0034 (0) 902014909 e-mail : ruiz@seltron.org Attn : JL RUIZ GREECE DATA LOGIC SL Pol Ind Mas Batlle, C/I. Iglesias 161, 43206 Reus Tel : 0034 (0) 902141209 e-mail : jmfortuny@datalogic.es Attn : JM Fortuny ALMAN HELLAS LTD ORTANSIAS 23, GR-13677 ACHARNAI, ATHENS, GREECE Tel : 00302 (0) 102409150 e-mail : support@alman.gr Attn : JOHN SPANOS Switzerland Turkey Pictronic AG Aavorstadt 40,5600 Lenzburg Tel : 0041 (0) 62 892 96 00 e-mail : correia@pictronic.ch Attn : Thomas Correia Multimedya Küçükköy karayolları mah 569. Sk no:6 k:2 GaziosmanPaşa Istanbul Tel : 0090 (0) 212 479 46 46 e-mail : gurhan.bayir@multimedya.com Attn : Gürhan Bayır ITALY Czech Republic, Slovakia SIL Eastern Europe a.s. Tesinska 1970/56, 710 00, Ostrava,Czech Republic Tel : 00420 (0) 596 253 677 e-mail : schneider@sil.cz Attn : Tomas Schneider Euvision SRL Via di Grotte Portella, 6/8 00044 Frascati - Roma - Italy EU Tel : 0039 06 94293 321 e-mail : Infoservizi@hyundai.it Attn : LUCARELLI STEFANO Lithuania Norway A Novo Fetveien 1 Tel : 0047 63804538 e-mai : joa@anovo.no Attn : Joakim Skriung E-MISIJA d.o.o. LJUBLJANSKA CESTA 21 D Tel : 00386 (0) 18303560 e-mail : hyundai@e-misija.si Attn : ZAPLOTNIK BOSTJAN "ServiceNet" UAB Gaiziunu g.3, Kaunas LT-50128, Lithuania Tel : 00370 (37) 400160 e-mail : Robertas_Zubrus@servicenet.lt Attn : Robertas Zubrus Croatia HG Spot Avenija Dubrovnik 46 10010 Zagreb Tel : +385 (1) 66 11 548
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.4 Linearized : No XMP Toolkit : 3.1-701 About : uuid:4d701af6-bfd1-4223-b36e-a80a7af7f262 Producer : Acrobat Distiller 6.0 (Windows) Modify Date : 2007:04:04 19:57:48+09:00 Create Date : 2007:04:02 16:50:05+09:00 Metadata Date : 2007:04:04 19:57:48+09:00 Document ID : uuid:253c2e2a-3ff1-4b76-87fe-0aa2c7b342b6 Instance ID : uuid:e536ffbe-8ad5-4822-95d6-123fd9bf26dc Format : application/pdf Title : untitled Has XFA : No Page Count : 48EXIF Metadata provided by EXIF.tools