Hyundai IBT P276L LCD MONITOR User Manual 002

Hyundai IBT Corp. LCD MONITOR 002

User Manual

27 ” Wide LED Monitor User Manual LCD MONITOR User Manual P276L
PrecautionsAC outletPower cord Warning The following information will help you avoid the risk of electric shock, serious injury or death.Plug the power cord into aproperly grounded outlet.There is the risk of electricshock.Do not unplug from the outletby pulling the power cord orwhen your hands are wet.There is the risk of electricshock or fire.Do not allow any object or liq-uid to enter inside the monitor.There is the risk of electricshock, fire or damage to themonitor.Do not bend the power cordexcessively nor place heavy objectson it. Keep children and pets awayfrom the power cord as they maydamage the power cord. There isthe risk of electric shock or fire.Do not use a damaged powercord or plug. Make sure theplug fits snugly into the outlet.There is the risk of electricshock or fire.Do not expose the monitor tothe direct sun light.Keep the monitor away from hightemperature, humidity, and dust.Operating environment=10~40degrees CelsiusOperating environment=20~80relative humidity.Do not block the fan louvers.There is the risk of fire or dam-age to the monitor.Use a proper voltage/currentlevel indicatedDo not clean the LCD withabrasive chemicals.There is the risk of damage tothe LCD.Do not scratch and damagethe LCD with sharp objects.Keep the monitor away fromobjects and electrical appli-ances that may generate elec-tromagnetic fields.Place the monitor on a flat, sta-ble surface. The monitor mayfall and there is the risk ofdamage or injury.Unplug the power cord whenthe monitor is not in use for along period of time.If you hear a noise or smellsmoke from the computer oradaptor, unplug the power cordimmediately, and call the servicecenter. There is the risk of elec-tric shock or fire.Do not overload an electricaloutlet with too many devices.There is the risk of fire.Do not attempt to disassemble,fix or modify the monitor.There is the risk of electricshock or fire.CautionThe following information will help you avoid the risk of minor or moderate injury or damage to the monitor.PrecautionsThe socket - outlet shall be installed near the equipment and shall be easily accessible.
11 : For Audio Model Only.Monitor StandPower Cord24pin DVI Cable Display port CableAudio CableInstall CD / Quick guide* Push the hook until hanging For Audio Model Only.AUDIO IN5 4 15-pin Dsub CableVGADVIDISPLAY PORTAUDIO Cable *115-pin D-Sub Signal CableDVI-D CableDP Cable
“UP, DOWN”“MENU”“UP, DOWN”“UP, DOWN”DOWNUPSCALE Change Ratio (Wide or Normal)SOURCE Change Input SignalLCDLCDVolume* VGA OnlyGGGGGGGGGG PICTUREBRIGHTNESS 90CONTRAST 60H.POSITION 50V.POSITION 50PHASE 76CLOCK 50AUTO ADJUST1920x1080 G GGGGGGGGGGGGGG VGA9Turn on / off DCR Function.AUTO ADJUSTPICTUREH.POSITIONV.POSITION*1 : Not available in DVI and DP mode .COLOR COLOR TEMPRED,GREEN,BLUESelect the most comfortable color tone to your eyes STANDARD -> REDDISH -> BLUISH -> USER * STANDARD : for general color tone. * REDDISH : for reddish color with warm tone. * BLUISH : for bluish color with cool tone. * USER : for adjusting degree of RGB as user wants For adjusting the each color as user wants.AUTO COLOR Automatically set optimum screen.FUNCTION INPUT SELECTASPECT RATIODCRTo switch current and other input source.OSD RECALLH.POSITIONV.POSITIONTIMERLANGUAGERecall the saved initial data.Adjusts OSD display time on the screen.Select OSD language.( 5 langauges )*1*1*1*1*1*1
8 9 800 x 6001024 x 7681280 x 960 1280 x 10241440 x 900 1680 x 1050 1920 x 1080480p576p720p1080p35.2 kHz37.8 kHz48.3 kHz60.0 kHz63.9 kHz55.9 kHz64.7 kHz67.5 kHz56 Hz60 Hz60 Hz60 Hz60 Hz60 Hz60 Hz60 Hz50/6050/6050/6050/60DVI(HDCP)Under 24W(Typ)Less then 0.5W
1 : For Audio Model Only.3597.89mm(H) x 336.31mm(V) 0.3114mm(H) x 0.3114mm(V)1920 x 1080@60Hz170º/160º(H/V)16.7M< 24W (Typ.)1Wx2AC:100V-240V 50/60Hz, 1.5ADVI-D, AUDIO *10027” Wide*110 11< 0.5W ,DSUB ,DISPLAY PORT Specification60Hz – 75Hz31KHz ~ 80KHz
12FCC complianceNote: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: ㆍReorient or relocate the receiving antenna. ㆍIncrease the separation between the equipment and receiver. ㆍConnect the equipment into an outlet on a circuit different from that to which the receiver is connected. ㆍConsult the dealer or an experienced radio/TV technician for help. Change or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment under FCC rules.

Navigation menu