Hyundai IBT P4200S001 PDP Monitor User Manual 1
Hyundai IBT Corp. PDP Monitor 1
User Manual
FCC ID : PJIP4200S001
ATTACHMENT E.
- USER’S MANUAL -
REPORT NO. : HCT-F03-0701 HYUNDAI C–TECH
Hyundai
Plasma Display
PD421
User’s Guide
1UIOM:M\MV\QWVMNNMK\ӧ
Image retention effect could be seen if still picture is continuously displayed for a
certain period of time as a feature of Plasma display panel.
To avoid this effect, use the product with reduced brightness and contrast especially
when a still image is displayed for long time. (example:contrast 75, brightness 50)
Once Image retention is created, change the mode into Video mode which displays
more motions. This can help to reduce Image retention effect but cannot completely
eliminate once it occurs. Especially, when a fixed pattern is frequently used, screen’s
brightness may be worsened. (For more details, see the page 25)
8Q`MT,MNMK\ӧ
Plasma panel is made of a group of refined pixels (cells). When the Panel has 99.9%
of pixels approved, that is normal product. Therefore, please do not think it is a
faulty product if some pixels of a panel flickers or off all the time.
U.S.A.
U.S.FEDERAL COMMUNICATIONS COMMISSION
RADIO FREQUENCY INTERFERENCE STATEMENT
INFORMATION TO THE USER
NOTE : This equipment has been tested and found to comply with the limits for a
Class B digital device pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful
interference in a residential installation.
This equipment generates, uses, and can radiate radio frequency energy and, if
not installed and used in accordance with the instructions, may cause harmful
interference to radio communications.
However, there is no guarantee that interference will not occur in a particular
installation.
If this equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following
measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet of a circuit different from that to which
the receiver is connected.
Consult the dealer or an experienced radio/TV technician for assistance.
Changes or modification not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
Connecting of peripherals requires the use of grounded shielded signal cables.
BACK
NEXT
Safety Precautions ................................................... 1
Contents of the Package........................................... 3
Parts Names and Functions .................................... 5
Remote Control ........................................................ 7
Connecting VCR, Cable/Satellite Receiver ............. 11
Connecting a DVD player ....................................... 12
Connecting DTV(Digital Broadcast) Receiver ........ 13
Connecting to a PC(DVI, D-SUB) .......................... 14
Resolutions Supported in PC ................................ 15
How To Select Picture Mode ................................. 17
How To Set the User Picture ................................ 18
How To Select Sound Mode .................................. 19
How To Set the User Sound ................................. 20
How To Select the Aspect Ratio ........................... 21
How To Select Color Temperature ........................ 23
How To Know the Picture Information .................. 24
How To Adjust Image ............................................25
How To Adjust Image(Under PC Input Mode) ...... 26
How To Set Key-Lock ............................................27
How To Set Multi-Screen ...................................... 28
Still Function .......................................................... 31
How To Set OSD(On Screen Display) .................. 32
How To Set the Clock ...........................................33
How To Set On Time/Off Time ............................. 34
How to Set Sleep/Run Time .................................. 35
Cleaning and Caring .............................................. 37
Troubleshooting ...................................................... 38
Product Specifications ............................................ 39
1
*);1+;
<PMKWV\MV\[WN\PQ[[MK\QWVIZMXZW^QLMLNWZ\PM[INM\aWN][MZ[IVL\PMQZXZWXMZ\a
8TMI[MZMIL\PMKWV\MV\[JMNWZM][QVO
Safety instructions are divided into “warning”and “alert”. Their meanings are as follows.
This pictorial sign is used when a caution is needed on a potentially dangerous items and operations.
Warning
:When there is a possibility of serious injury or death upon violation of the displayed instruction.
Alert
:When there is a possibility of slight injury or product damage upon violation of the displayed instruction.
Firmly plus the power cord so
that it does not pull out.
- Unstable connection may cause fire.
Do not use damaged power cord
or plug, or loose outlet.
- They may cause electric shock or fire.
Never touch power plug with wet
hand.
- They may cause electrocution.
Do not put water bowl, vase,
candle, bug repellant smoke,
cigarette, small metal palette, or
heavy thing on a PDP.
- It may cause electric shock or fire and
also heavy things may cause injury when
it falls.
Do not install in a place where
there are oil, smoke, or humidity,
or where water is sprinkled or in
a car.
- They may cause electric shock or fire.
Do not install on an unstable place
or small support.
- If a child touch a PDP on such place while
playing, PDP may fall and injury the child.
?IZVQVO
HYUNDAI Plasma Display PD421
2
*);1+;
Do not use or store flammable
spray or inflammables in a place
near a PDP.
- They may cause explosion or fire.
Do not install a PDP in a
bookshelf, closet, or a place
where air is not well circulated.
- Fire may be caused due to the rise of
internal temperature.
Bend an antenna line downward on
a point where the line pass through
from outdoor to indoor so that
rainwater may not penetrate indoor.
- If raindrop gets into a PDP, fire or electric
shock may be caused.
Never separate, fix, or modify at
user’s discretion.
- When there is a need for fixing, call a
service center. Fire or electric shock
may be caused.
Do not put a metallic object like
chopstick, wire, or puncher or
inflammables like paper or a
match in a vent, headphone
jack, or AV jacks of PDP.
- Electric shock or fire may be caused.
When a PDP produces abnormal
noise, burning smell, or smoke,
unplug the PDP immediately and
call a service center.
- Electric shock or fire may be caused.
Unplug when you do not use your
PDP for long time.
- If dust is stacked on a PDP, electric shock
or fire may be caused from heat, fire, or
deterioration of insulation.
When moving a PDP, 2 or more
people are advised to carry it.
- Injury or damage may be caused when a
PDP falls.
Consult a service center or
customer service for inside cleaning
about once a year.
- When dust is collected inside a PDP for long
time, fire or malfunction may be caused.
?IZVQVO
3
*);1+;
<WX]ZKPI[MILLQ\QWVITXIZ\[KWV[]T\ILQ[\ZQJ]\WZWZ[MTTQVOIOMV\
1NaW]_IV\\WX]ZKPI[M[MXIZI\MTa[WTLXZWL]K\[KWV[]T\I[MZ^QKMKMV\MZMTMK\ZWVQK[[PWX[WZXIZ\[[MTTMZ
:MUW\M+WV\ZWT*I\\MZQM[
>))
8+[QOVITKIJTM8W_MZKWZL
+WUXW[Q\M>QLMW)]LQWKIJTM+WUXWVMV\A8J8Z+IJTM
,M[S\aXM[XMISMZ,M[S\aXM[\IVL ,M[S\aXM[XMISMZ[\IVL
=[MZœ[/]QLM
HYUNDAI Plasma Display PD421
4
*);1+;
.Q`ML_ITTUW]V\NZIUM )LR][\IJTM_ITTUW]V\NZIUM
+MQTQVOUW]V\NZIUM ;^QLMWKIJTM
,>18+^QLMWLQOQ\ITKIJTM
5
*);1+;
.ZWV\>QM_
Remote
sensor
and
power
LED.
Point the remote control toward here. It
displays standby or operation status.
Menu
button
Use this button to display or exit from
menus.
Source
button(Page
11~14)
Use this button to switch among inputs
connected to PDP.
PC, DVI, DTV, DVD, S-VIDEO, VIDEO,
SCART are sequentially chosen.
▲▼◀▶buttons
Use these buttons to select menu items
and to make adjustments.
When no menu is displayed, you can use
the ◀▶buttons to adjust the volume level.
Power
button:
Use this button to turn on or off a PDP
HYUNDAI Plasma Display PD421
6
:MIZ>QM_
*);1+;
RS-232
input
terminal
Connect to the RS-232 terminal
of a PC for the service check.
*For the control method using
this terminal, consult an
authorized Hyundai PDP dealer.
Phone
Jack
Extend an RS-232 input.
❸ DVI
input
terminal(Page
14)
Connect to the video output
terminal of a PC.
*Provided the PC has a digital
output terminal.
❹ PC
audio
input
terminal
Connect to the audio output
terminal of a PC.
D-SUB
input
terminal
Connect to the video output
terminal of a PC.
❻ Component
input
terminal
for
DTV(Page
13)
Connect to the Component
output terminal of DTV receiver
for Digital broadcast.
❼ Audio
input
terminal
for
DTV
Connect to the audio output
terminal of DTV receiver.
❽ Component
input
terminal
for
DVD(Page
12)
Connect to the Component
output terminal of DVD player.
Audio
input
terminal
for
DVD
Connect to the audio output
terminal of DVD player.
SS--vviiddeeoo
iinnppuutt
tteerrmmiinnaall((PPaaggee
1111))
Use this for the better video
quality than video input
terminal.
Video
Composite
input
terminal
for
VCR
Connect to the Composite Video
output terminal of VCR or DVD
player.
Audio
input
terminal
for
VCR
Connect this when S-video or
Composite Video inputs.
SCART
input
terminal
For Composite Video inputs and
audio inputs used in the
European area.
Power
input
terminal
Power cord is connected here.
Speaker
terminal
Stand
assembly
Speaker
assembly
Carrying
handles
Screw
hole
for
fixing
on
a
wall
7
*);1+;
MUTEMUTE
SOUNDSOUND
ASPECTASPECT
SLEEPSLEEP
PC PC AUTAUTO
VOLVOL
MUTEMUTE
INFOINFO
MENUMENU
PICTUREPICTURE
STILLSTILL
POWER/STPOWER/STANDBYANDBY
VOLVOL
P
OSIT
I
ON
PIP O
N
/OF
F
MO
DE
S
OURC
E
S
I
ZE
S
WA
P
P
I
P
INPUTINPUT SOURCE SOURCE
POWER/STANDBY
PICTURE
MUTE
SOUND
ASPECT
RATIO
SLEEP
VOL
PC
AUTO
MODE
PIP
ON/OFF
POSITION
NOT
USED
STILL
MENU
SELECT/ADJUST
INFO
MUTE
VOL
INPUT
SOURCE
SOURCE(MULTI
SCREEN)
SWAP
SIZE
MUTEMUTE
SOUNDSOUND
ASPECTASPECT
SLEEPSLEEP
PC PC AUTAUTO
VOLVOL
MUTEMUTE
INFOINFO
MENUMENU
PICTUREPICTURE
STILLSTILL
POWER/STPOWER/STANDBYANDBY
VOLVOL
P
OSIT
I
ON
PIP O
N
/OF
F
MO
DE
S
OURC
E
S
I
ZE
S
WA
P
P
I
P
INPUTINPUT SOURCE SOURCE
HYUNDAI Plasma Display PD421
8
*);1+;
8ZM[[IVLPWTLƆ XIZ\IVLX][P\WWXMVKW^MZ
1V[MZ\JI\\MZQM[_Q\PXZWXMZXWTIZQ\QM[WNIVL
=[M\PMZMUW\MKWV\ZWT_Q\PKW^MZKTW[ML
*I\\MZa\aXM">=5)):
POWER/STANDBY
Power ON and OFF the product.
STILL
Hold a picture.
MENU
Display or exit from menu.
SELECT/ADJUST
BUTTONS
Select or adjust each item of menu.
INFO
For the information such as picture mode,
resolution, and so forth.
MUTE
Make no sound.
VOL
Control volume.
INPUT
SOURCE
Select input wanted among inputs connected to PDP
SOURCE(MULTI
SCREEN)
Select input signals of Sub picture.
SWAP
Switch main picture and Sub picture.
SIZE
Change the size of Sub picture.
POSITION
Change the position of Sub picture.
PIP(PICTURE
IN
PICTURE)
ON/OFF
Watch more than one picture at once.
MODE
Multi picture or Dual picture is in use.
PC
AUTO
Automatically adjust setting according to the
frequency and resolution selected in a PC mode.
SLEEP
Turn off a PDP after a preset time.
ASPECT
RATIO
Change the size of picture.
SOUND
Select the status of sound.
PICTURE
Select a mode of picture.
The buttons are reserved for functions coming with
later models and do not currently operate.
Connecting VCR, Cable/Satellite Receiver ......................... 11
Connecting a DVD player ................................................... 12
Connecting DTV(Digital Broadcast) Receiver .....................13
Connecting to a PC(DVI, D-SUB) ...................................... 14
Resolutions Supported in PC ............................................. 15
HYUNDAI PLASMA DISPLAY
+WVVMK\QWV5M\PWL
Connect Video/S-Video cable between Video/S-Video output terminal of VCR or Cable/Satellite receiver
and Video/S-Video input terminal of PDP.
(Connect cables and terminal in the same colors)
Connect Audio cable (left:white color, right:red color) between Audio output terminal of VCR or
cable/satellite receiver and Audio input terminal of PDP.
(Connect cables and terminal in the same colors)
0W_\W?I\KP
Turn on the PDP and press of remote control to select either Video or S-video.
●You can select PC DVI DTV DVD S-VIDEO VIDEO SCART in order.
VCR play : Turn on the VCR and insert a tape and play it.
Cable/Satellite receiver play : Turn on the receiver and select a channel.
●Read a user manual of VCR, Cable/Satellite Receiver for more details.
=[M;^QLMWKIJTM[NWZJM\\MZXQK\]ZMY]ITQ\a
Q ,<>ᇰዅቼၮഎ XX Q ,>,ᇰዅቼၮഎ Q
;=*ၮഎ
A8J8Z
Ⴚၗໜဨ Ⴚၗໜဨ
8JA8Z
)=,17
;>1,-7
>1,-7
: 4
)6<7=<
)6<16
VVCCRR//CCaabbllee
RReecceeiivveerr
VVIIDDEEOO
CCaabbllee
SS--VVIIDDEEOO
CCaabbllee
PPOOWWEERRCCaabbllee
AAUUDDIIOOCCaabbllee
11
+766-+<176;
INPUT SOURCE
SOURCEMODE
PIP ON/OFF
SWAPSIZE
POSITION
+WVVMK\QWV5M\PWL
Connect video cables(Y, Pb, Pr) between output terminals(Y, Pb, Pr) of DVD player and the input
terminals(Y, Pb, Pr) of Component(480i) on the rear of PDP.
(Connect cables and terminal in the same colors)
Connect Audio cable between Audio output terminal of DVD player and Audio input terminal for DVD Audio
on the rear of PDP.
(Connect cables and terminal in the same colors)
When DVD player supports the progressive scan(480p), connect to the Y, Pb, Pr input terminals for DTV
on the rear of PDP.
0W_\W_I\KP
Turn on the PDP and press of remote control to select DVD.
●You can select PC DVI DTV DVD S-VIDEO VIDEO SCART in order.
Turn on a DVD player and use it.
●Read the user manual of DVD player for more details.
7]\X]\\MZUQVITUIZSA8JIVL8ZWN,>,XTIaMZUIaJM_ZQ\\MVI[A*A:AA+J+Z
A8J8Z1\LMXMVL[WV,>,XTIaMZ
HYUNDAI Plasma Display PD421
12
+766-+<176;
,<>ၮഎ XX Q ,<>ᇰዅቼၮഎ XX Q
,;=*ၮഎၗໜဨ
A8J8Z
Ⴚၗໜဨ
8JA8Z
,>,
+75876-6<
Q >1,-7
+7587;1<-
;>1,-7
4
)=,17
: >1,-7 4
)=,17
:
;+):<
)=,17
>1,-7 ;>1,-7
+75876-6<>1,-7
DDVVDD
PPllaayyeerr
AAUUDDIIOOCCaabbllee
INPUT SOURCE
SOURCEMODE
PIP ON/OFF
SWAPSIZE
POSITION
VVIIDDEEOO((YY,,
PPbb,,
PPrr))
CCaabbllee
13
+766-+<176;
+WVVMK\QWV5M\PWL
Connect video cables(Y, Pb, Pr) between output terminals(Y, Pb, Pr) of DTV Receiver and the input
terminals(Y, Pb, Pr) of Component(480p/720p/1080i) on the rear of PDP. (Connect cables and terminal in
the same colors)
Connect Audio cable between Audio output terminal of DTV Receiver and Audio input terminal for DTV
Audio on the rear of PDP. (Connect cables and terminal in the same colors)
0W_\W?I\KP
Turn on the PDP and press of remote control to select DTV.
●You can select PC DVI DTV DVD S-VIDEO VIDEO SCART in order.
Turn on the DTV receiver and use it.
●Read the user manual for DTV receiver for more details.
<W_I\KPLQOQ\ITJZWILKI[\aW]PI^M\W[MXIZI\MTaX]ZKPI[MILQOQ\IT[M\\WXJW`IVLKWVVMK\Q\
\W8,8
INPUT SOURCE
SOURCEMODE
PIP ON/OFF
SWAPSIZE
POSITION
:/*8+ၮഎ@/):/*,<>ၮഎ XX Q ๗ಀ๗༺ဧ:;
,>1ၮഎ,1/1<)4 ,;=*ၮഎၮഎ ᆖഎ Ⴚၗໜဨ
A8J8Z 8JA8Z ື
,<>
+75876-6<
XX Q ,>,
+75876-6<
Q
4
)=,17
: 4
)=,17
:
)=,17
>1,-7 ;>1,-7
+75876-6<>1,-7
AAUUDDIIOOCCaabbllee
VVIIDDEEOO((YY,,
PPbb,,
PPrr))
CCaabbllee
DDTTVV
RReecceeiivveerr
HYUNDAI Plasma Display PD421
14
+766-+<176;
+WVVMK\QWV5M\PWL
Connect PC signal cable(15 pins D-sub) between output terminal of PC and the D-sub input terminal of
a PDP. In case of DVI(Digital) cable, connect it between output terminal for DVI(DIGITAL) of PC and
input terminal for DVI of PDP.
Connect Audio cable between Audio output terminal of PC and Audio input terminal for PC of PDP.
(Connect cables and terminal in the same colors)
?PMV=[QVO)[I8+5WVQ\WZ
Turn on the PDP and press of remote control to select PC.
●You can select PC DVI DTV DVD S-VIDEO VIDEO SCART in order.
Turn on the PC and use it. (Refer to page 15 on the back for the supported resolutions for PC)
●When using DVI, select DVI to press Source button.
,>1KIJTMXZW^QLM[JM\\MZXQK\]ZMY]ITQ\a
<PQ[XZWL]K\[]XXWZ\[XT]OIVLXTIaN]VK\QWV
?MZMKWUUMVL\PMIJW^MUM\PWLQN\PM[I\MTTQ\MZMKMQ^MZ[]XXWZ\[,<>[QOVIT
_Q\P,>1,QOQ\ITIVL,[]JXQVKIJTMNWZ\PMJM\\MZY]ITQ\aXQK\]ZM
INPUT SOURCE
SOURCEMODE
PIP ON/OFF
SWAPSIZE
POSITION
A8J8Z
Ⴚၗໜဨ
:/*8+@/):/*,<> XX Q
,<>
+75876-6<
:;
,>1,1/1<)4 ,;=*
168=< 7=<8=<
4
)=,17
:
AAUUDDIIOOCCaabbllee
DD--SSUUBB
CCaabbllee((1155ppiinn))
DDVVII
CCaabbllee((DDIIGGIITTAALL))
15
+766-+<176;
:M[WT]\QWV[;]XXWZ\MLQV8+
* Recommend Resolution is 800x600@60Hz
:M[WT]\QWV
31.47
37.86
31.47
37.86
37.50
43.27
31.47
37.88
48.08
46.88
53.67
49.72
48.36
60.02
68.68
>MZ\QKITNZMY]MVKa
70.09
85.08
59.94
72.80
75.00
85.01
70.08
60.32
72.18
75.00
85.06
74.55
60.00
75.03
85.00
`
`
`
`
`
`
0WZQbWV\ITNZMY]MVKa
Connecting VCR, Cable/Satellite Receiver ......................... 11
Connecting a DVD player ................................................... 12
Connecting DTV(Digital Broadcast) Receiver .....................13
Connecting to a PC(DVI, D-SUB) ...................................... 14
Resolutions Supported in PC ............................................. 15
HYUNDAI PLASMA DISPLAY
+WVVMK\QWV5M\PWL
Connect Video/S-Video cable between Video/S-Video output terminal of VCR or Cable/Satellite receiver
and Video/S-Video input terminal of PDP.
(Connect cables and terminal in the same colors)
Connect Audio cable (left:white color, right:red color) between Audio output terminal of VCR or
cable/satellite receiver and Audio input terminal of PDP.
(Connect cables and terminal in the same colors)
0W_\W?I\KP
Turn on the PDP and press of remote control to select either Video or S-video.
●You can select PC DVI DTV DVD S-VIDEO VIDEO SCART in order.
VCR play : Turn on the VCR and insert a tape and play it.
Cable/Satellite receiver play : Turn on the receiver and select a channel.
●Read a user manual of VCR, Cable/Satellite Receiver for more details.
=[M;^QLMWKIJTM[NWZJM\\MZXQK\]ZMY]ITQ\a
Q ,<>ᇰዅቼၮഎ XX Q ,>,ᇰዅቼၮഎ Q
;=*ၮഎ
A8J8Z
Ⴚၗໜဨ Ⴚၗໜဨ
8JA8Z
)=,17
;>1,-7
>1,-7
: 4
)6<7=<
)6<16
VVCCRR//CCaabbllee
RReecceeiivveerr
VVIIDDEEOO
CCaabbllee
SS--VVIIDDEEOO
CCaabbllee
PPOOWWEERRCCaabbllee
AAUUDDIIOOCCaabbllee
11
+766-+<176;
INPUT SOURCE
SOURCEMODE
PIP ON/OFF
SWAPSIZE
POSITION
+WVVMK\QWV5M\PWL
Connect video cables(Y, Pb, Pr) between output terminals(Y, Pb, Pr) of DVD player and the input
terminals(Y, Pb, Pr) of Component(480i) on the rear of PDP.
(Connect cables and terminal in the same colors)
Connect Audio cable between Audio output terminal of DVD player and Audio input terminal for DVD Audio
on the rear of PDP.
(Connect cables and terminal in the same colors)
When DVD player supports the progressive scan(480p), connect to the Y, Pb, Pr input terminals for DTV
on the rear of PDP.
0W_\W_I\KP
Turn on the PDP and press of remote control to select DVD.
●You can select PC DVI DTV DVD S-VIDEO VIDEO SCART in order.
Turn on a DVD player and use it.
●Read the user manual of DVD player for more details.
7]\X]\\MZUQVITUIZSA8JIVL8ZWN,>,XTIaMZUIaJM_ZQ\\MVI[A*A:AA+J+Z
A8J8Z1\LMXMVL[WV,>,XTIaMZ
HYUNDAI Plasma Display PD421
12
+766-+<176;
,<>ၮഎ XX Q ,<>ᇰዅቼၮഎ XX Q
,;=*ၮഎၗໜဨ
A8J8Z
Ⴚၗໜဨ
8JA8Z
,>,
+75876-6<
Q >1,-7
+7587;1<-
;>1,-7
4
)=,17
: >1,-7 4
)=,17
:
;+):<
)=,17
>1,-7 ;>1,-7
+75876-6<>1,-7
DDVVDD
PPllaayyeerr
AAUUDDIIOOCCaabbllee
INPUT SOURCE
SOURCEMODE
PIP ON/OFF
SWAPSIZE
POSITION
VVIIDDEEOO((YY,,
PPbb,,
PPrr))
CCaabbllee
13
+766-+<176;
+WVVMK\QWV5M\PWL
Connect video cables(Y, Pb, Pr) between output terminals(Y, Pb, Pr) of DTV Receiver and the input
terminals(Y, Pb, Pr) of Component(480p/720p/1080i) on the rear of PDP. (Connect cables and terminal in
the same colors)
Connect Audio cable between Audio output terminal of DTV Receiver and Audio input terminal for DTV
Audio on the rear of PDP. (Connect cables and terminal in the same colors)
0W_\W?I\KP
Turn on the PDP and press of remote control to select DTV.
●You can select PC DVI DTV DVD S-VIDEO VIDEO SCART in order.
Turn on the DTV receiver and use it.
●Read the user manual for DTV receiver for more details.
<W_I\KPLQOQ\ITJZWILKI[\aW]PI^M\W[MXIZI\MTaX]ZKPI[MILQOQ\IT[M\\WXJW`IVLKWVVMK\Q\
\W8,8
INPUT SOURCE
SOURCEMODE
PIP ON/OFF
SWAPSIZE
POSITION
:/*8+ၮഎ@/):/*,<>ၮഎ XX Q ๗ಀ๗༺ဧ:;
,>1ၮഎ,1/1<)4 ,;=*ၮഎၮഎ ᆖഎ Ⴚၗໜဨ
A8J8Z 8JA8Z ື
,<>
+75876-6<
XX Q ,>,
+75876-6<
Q
4
)=,17
: 4
)=,17
:
)=,17
>1,-7 ;>1,-7
+75876-6<>1,-7
AAUUDDIIOOCCaabbllee
VVIIDDEEOO((YY,,
PPbb,,
PPrr))
CCaabbllee
DDTTVV
RReecceeiivveerr
HYUNDAI Plasma Display PD421
14
+766-+<176;
+WVVMK\QWV5M\PWL
Connect PC signal cable(15 pins D-sub) between output terminal of PC and the D-sub input terminal of
a PDP. In case of DVI(Digital) cable, connect it between output terminal for DVI(DIGITAL) of PC and
input terminal for DVI of PDP.
Connect Audio cable between Audio output terminal of PC and Audio input terminal for PC of PDP.
(Connect cables and terminal in the same colors)
?PMV=[QVO)[I8+5WVQ\WZ
Turn on the PDP and press of remote control to select PC.
●You can select PC DVI DTV DVD S-VIDEO VIDEO SCART in order.
Turn on the PC and use it. (Refer to page 15 on the back for the supported resolutions for PC)
●When using DVI, select DVI to press Source button.
,>1KIJTMXZW^QLM[JM\\MZXQK\]ZMY]ITQ\a
<PQ[XZWL]K\[]XXWZ\[XT]OIVLXTIaN]VK\QWV
?MZMKWUUMVL\PMIJW^MUM\PWLQN\PM[I\MTTQ\MZMKMQ^MZ[]XXWZ\[,<>[QOVIT
_Q\P,>1,QOQ\ITIVL,[]JXQVKIJTMNWZ\PMJM\\MZY]ITQ\aXQK\]ZM
INPUT SOURCE
SOURCEMODE
PIP ON/OFF
SWAPSIZE
POSITION
A8J8Z
Ⴚၗໜဨ
:/*8+@/):/*,<> XX Q
,<>
+75876-6<
:;
,>1,1/1<)4 ,;=*
168=< 7=<8=<
4
)=,17
:
AAUUDDIIOOCCaabbllee
DD--SSUUBB
CCaabbllee((1155ppiinn))
DDVVII
CCaabbllee((DDIIGGIITTAALL))
15
+766-+<176;
:M[WT]\QWV[;]XXWZ\MLQV8+
* Recommend Resolution is 800x600@60Hz
:M[WT]\QWV
31.47
37.86
31.47
37.86
37.50
43.27
31.47
37.88
48.08
46.88
53.67
49.72
48.36
60.02
68.68
>MZ\QKITNZMY]MVKa
70.09
85.08
59.94
72.80
75.00
85.01
70.08
60.32
72.18
75.00
85.06
74.55
60.00
75.03
85.00
`
`
`
`
`
`
0WZQbWV\ITNZMY]MVKa
How to Select Picture Mode .............................................. 17
How to Set the User Picture ............................................. 18
How to Select Sound Mode ............................................... 19
How To Set the User Sound ............................................ 20
How To Select the Aspect Ratio ....................................... 21
How To Select Color Temperature ..................................... 23
How To Know the Picture Information .............................. 24
How To Adjust Image ......................................................... 25
How To Adjust Image(Under PC Input Mode) ................... 26
How To Set Key-Lock ........................................................ 27
How To Set Multi-Screen ................................................. 28
Still Function ....................................................................... 31
How To Set OSD(On Screen Display) ............................... 32
How To Set the Clock ...................................................... 33
How To Set On Time/Off Time .......................................... 34
How to Set Sleep/Run Time .............................................. 35
HYUNDAI PLASMA DISPLAY
17
)8841+)<176;
=[MZ[KIVILR][\XQK\]ZMUWLMI]\WUI\QKITTaIKKWZLQVO\W\PMQVX]\UWLM>1,-7;>1,-7,>,;+):<,<>
0W_<W,QZMK\Ta;MTMK\8QK\]ZM5WLM"8ZM[[J]\\WV
- Users can select Standard Dynamic Movie Mild User when the input mode is DTV, DVD,
VIDEO, S-VIDEO, or SCRAT.
- Users can select Standard Low(Text mode) High(movie) User when the input mode is
for PC or DVI.
8ZM[[5MV]J]\\WV
Menu items appear on the screen.
8ZM[[=XIVL,W_VJ]\\WV\WUW^M\WŔ8QK\]ZMŕ
8ZM[[4MN\IVL:QOP\J]\\WV
Picture menu appears.
Press Left and Right button, then the menu
changes in order below.
Standard Day Movie Night User
Press Menu button after the setting is done, and Menu goes to the previous menu.
If the button is pressed repeatedly, the menu disappears.
STANDARD :
For
general
contents.
It
fits
most
video
contents.
DYNAMIC :
For
a
clear
display.
MOVIE :
For
movies.
MILD :
For
a
soft
display.
USER :
When
the
user
wants
to
set
the
values see the next page
81+<=:-
5-6=
;7=6,
.=6+<176
7;,
<15-
;-4-+<57>- 5-6=
81+<=:-
57,- ;<)6,):,
!
+76<:);<
*:1/0<6-;;
;0):86-;;
+747:
<16<
;-4-+<57>- 5-6=
SOURCEMODE
PIP ON/OFF
SWAPSIZE
POSITION
MENU
SOURCEMODE
PIP ON/OFF
SWAPSIZE
POSITION
MENU
SOURCEMODE
PIP ON/OFF
SWAPSIZE
POSITION
SOURCEMODE
PIP ON/OFF
SWAPSIZE
POSITION
SOURCEMODE
PIP ON/OFF
SWAPSIZE
POSITION
<PMUWLMUIaJMKPIVOMLQV\W\PM][MZœ[UWLMQN\PM][MZILR][\[KWV\ZI[\JZQOP\VM[[
[PIZXVM[[KWTWZ\QV\I\[\IVLIZLLaVIUQKUW^QMWZUQTLUWLM
SOURCEMODE
PIP ON/OFF
SWAPSIZE
POSITION
PICTURE
HYUNDAI Plasma Display PD421
18
)8841+)<176;
=[MZ[KIVUIV]ITTaILR][\\PMXQK\]ZMQV\PMQZW_V_Ia[
8ZM[[5MV]J]\\WV
Menu items appear on the screen.
8ZM[[=XIVL,W_VJ]\\WV[\WUW^M\WŔ8QK\]ZMŕ
8ZM[[4MN\IVL:QOP\J]\\WV
Picture menu appears.
8ZM[[4MN\IVL:QOP\J]\\WV\QTT\PMUMV]KPIVOM[
QV\WC=[MZE
8ZM[[=XIVL,W_VJ]\\WV\WKPWW[M1\MU
8ZM[[4MN\IVL:QOP\J]\\WV\WILR][\
Press the menu button after the setting is done, and the menu goes to the
previous menu. If the button is pressed repeatedly, the menu disappears.
CONTRAST :
Adjust
the
brightness
and
darkness
of
object
and
background.
BRIGHTNESS :
Adjust
the
brightness
of
the
entire
picture.
SHARPNESS :
Adjust
clarity
of
outline
of
objects.
COLOR :
Adjust
colors
into
deeper
or
lighter
colors.
TINT :
Adjust
colors
naturally.
81+<=:-
5-6=
;7=6,
.=6+<176
7;,
<15-
;-4-+<57>- 5-6=
81+<=:-
57,- =;-:
!
+76<:);<
*:1/0<6-;;
;0):86-;;
+747:
<16<
;-4-+<57>- 5-6=
SOURCEMODE
PIP ON/OFF
SWAPSIZE
POSITION
MENU
SOURCEMODE
PIP ON/OFF
SWAPSIZE
POSITION
MENU
SOURCEMODE
PIP ON/OFF
SWAPSIZE
POSITION
SOURCEMODE
PIP ON/OFF
SWAPSIZE
POSITION
SOURCEMODE
PIP ON/OFF
SWAPSIZE
POSITION
;M\\QVOWN+WTWZIVL<QV\Q[VW\[]XXWZ\MLQV8+IVL,<>QVX]\UWLM[
SOURCEMODE
PIP ON/OFF
SWAPSIZE
POSITION
SOURCEMODE
PIP ON/OFF
SWAPSIZE
POSITION
=[MZ[KIVILR][\[W]VLUWLMI]\WUI\QKITTaI[][MZ[_IV\
0W_<W,QZMK\Ta;MTMK\;W]VL5WLM"8ZM[[J]\\WV
Users can select Standard Music Movie News User in order.
19
)8841+)<176;
8ZM[[5MV]J]\\WV
Menu items appear on the screen.
8ZM[[=XIVL,W_VJ]\\WV[\WUW^M\WŔ;W]VLŕ
8ZM[[4MN\IVL:QOP\J]\\WV
Sound menu appears.
Press Left and Right button, then the menu
changes in order below.
Standard Music Movie News User
Press the menu button after the setting is done, and the menu goes to the previous
menu. If the button is pressed repeatedly, the menu disappears.
STANDARD :
For
the
general
sound.
This
fits
most
audio
contents.
MUSIC :
For
enjoying
original
sound.
MOVIE :
For
grandiose
sound.
NEWS :
For
the
clear
sound.
USER :
When
the
user
wants
to
set
the
values
see
the
next
page
;-4-+<57>- 5-6=
81+<=:-
5-6=
;7=6,
.=6+<176
7;,
<15-
;7=6,
57,- ;<)6,):,
>74=5-
<:-*4-
*);;
*)4)6+-
;<-:-7
5767
;-4-+<57>- 5-6=
SOURCEMODE
PIP ON/OFF
SWAPSIZE
POSITION
MENU
SOURCEMODE
PIP ON/OFF
SWAPSIZE
POSITION
MENU
SOURCEMODE
PIP ON/OFF
SWAPSIZE
POSITION
SOURCEMODE
PIP ON/OFF
SWAPSIZE
POSITION
SOURCEMODE
PIP ON/OFF
SWAPSIZE
POSITION
<PMUWLMUIaJMKPIVOMLQV\W\PM][MZœ[UWLMQN\PM][MZILR][\[
^WT]UM\ZMJTMJI[[JITIVKMQV;\IVLIZL5][QK5W^QM6M_[UWLM[
SOURCEMODE
PIP ON/OFF
SWAPSIZE
POSITION
SOUND
HYUNDAI Plasma Display PD421
=[MZ[KIVUIV]ITTaILR][\\PM[W]VLQV\PMQZW_V_Ia[
20
)8841+)<176;
8ZM[[5MV]J]\\WV
Menu items appear on the screen.
8ZM[[=XIVL,W_VJ]\\WV[\WUW^M\WŔ;W]VLŕ
8ZM[[4MN\IVL:QOP\J]\\WV
Sound menu appears.
8ZM[[4MN\IVL:QOP\J]\\WV\QTT\PMUMV]KPIVOM[
QV\WC=[MZE
8ZM[[=XIVL,W_VJ]\\WV\WKPWW[MIVQ\MU
8ZM[[4MN\IVL:QOP\J]\\WV\WILR][\
Press the menu button after the setting is done, and the menu goes to the
previous menu. If the button is pressed repeatedly, the menu disappears.
VOLUME :
Adjust
the
volume.
TREBLE :
Adjust
the
tone
of
volume.
BASS :
Adjust
the
bass
of
the
volume.
BALANCE :
Adjusts
the
balance
of
left
and
right
speakers.
STEREO :
Choose
Stereo
or
Mono.
81+<=:-
5-6=
;7=6,
.=6+<176
7;,
<15-
;-4-+<57>- 5-6=
;7=6,
57,- =;-:
>74=5-
<:-*4-
*);;
*)4)6+-
;<-:-7
5767
;-4-+<57>- 5-6=
SOURCEMODE
PIP ON/OFF
SWAPSIZE
POSITION
MENU
SOURCEMODE
PIP ON/OFF
SWAPSIZE
POSITION
MENU
SOURCEMODE
PIP ON/OFF
SWAPSIZE
POSITION
SOURCEMODE
PIP ON/OFF
SWAPSIZE
POSITION
SOURCEMODE
PIP ON/OFF
SWAPSIZE
POSITION
SOURCEMODE
PIP ON/OFF
SWAPSIZE
POSITION
SOURCEMODE
PIP ON/OFF
SWAPSIZE
POSITION
=[MZ[KIVILR][\)[XMK\:I\QWI[][MZ[_IV\
21
)8841+)<176;
8ZM[[5MV]J]\\WV
Menu items appear on the screen.
8ZM[[=XIVL,W_VJ]\\WV[\WUW^M\WŔ.]VK\QWVŕ
8ZM[[4MN\IVL:QOP\J]\\WV
Function menu appears.
8ZM[[4MN\IVL:QOP\J]\\WV
Aspect Ratio menu appears.
Press Left and Right button, then the menu
changes in order below.
Wide Normal Panorama Zoom1 Zoom2
Press the menu button after the setting is done, and the menu goes to the previous
menu. If the button is pressed repeatedly, the menu disappears.
WIDE :
General
broadcast
picture
is
adjusted
to
16:9.
NORMAL :
General
picture
size.
PANORAMA :
Picture
size
for
panorama
video.
ZOOM1 :
Zoom
in
16:9
in
vertical
direction.
ZOOM2 :
It
moves
the
Zoom1
picture
a
little
upward
so
that
the
sub
title
may
be
seen.
;-4-+<57>- 5-6=
81+<=:-
5-6=
;7=6,
.=6+<176
7;,
<15-
.=6+<176
);8-+<:)<17
+747:<-58
16.7:5)<176
15)/-),2=;<
3-A47+3
5=4<1;+:--6
;-4-+<57>- 5-6=
);8-+<:)<17
);8-+< ?1,-
;-4-+<57>- 5-6=
SOURCEMODE
PIP ON/OFF
SWAPSIZE
POSITION
MENU
SOURCEMODE
PIP ON/OFF
SWAPSIZE
POSITION
MENU
SOURCEMODE
PIP ON/OFF
SWAPSIZE
POSITION
SOURCEMODE
PIP ON/OFF
SWAPSIZE
POSITION
SOURCEMODE
PIP ON/OFF
SWAPSIZE
POSITION
SOURCEMODE
PIP ON/OFF
SWAPSIZE
POSITION
HYUNDAI Plasma Display PD421
0W_<W,QZMK\Ta;MTMK\)[XMK\:I\QW" 8ZM[[J]\\WV
Setting Aspect Ratio depends on the input mode. Supported modes are as follows.
- Under VIDEO, S-VIDEO, DVD inputs: Users can select Wide Normal Panorama Zoom1 Zoom 2
in order.
- Under DTV input: Users can select Wide Zoom1 Zoom2 in order.
- Under PC input: Users can select Wid Normal in order.
22
)8841+)<176;
Sub Title
General broadcast picture is
adjusted to 16:9.
?1,-
General picture size.
67:5)4
Picture size for panorama
video.
8)67:)5)
Zoom in 16:9 in vertical direction.
B775
It moves the Zoom1 picture a
little upward so that the bottom
portion may be seen.
B775
SOURCEMODE
PIP ON/OFF
SWAPSIZE
POSITION
ASPECT
23
)8841+)<176;
=[MZ[KIVILR][\+WTWZI[][MZ[_IV\
8ZM[[5MV]J]\\WV
Menu items appear on the screen.
8ZM[[=XIVL,W_VJ]\\WV[\WUW^M\WŔ.]VK\QWVŕ
8ZM[[4MN\IVL:QOP\J]\\WV
Function menu appears.
8ZM[[4MN\IVL:QOP\J]\\WV\QTT\PMUMV]KPIVOM[
QV\WC+WTWZ<MUXE
8ZM[[4MN\IVL:QOP\J]\\WV
Color Temp menu appears.
Press Left and Right button, then Mode changes in order below.
Standard Cool Warm
Press the menu button after the setting is done, and the menu goes to the previous
menu. If the button is pressed repeatedly, the menu disappears.
STANDARD :
Colors
for
general
picture.
COOL :
Cool
colors
with
bluish
tone.
WARM :
Warm
colors
with
reddish
tone.
;-4-+<57>- 5-6=
81+<=:-
5-6=
;7=6,
.=6+<176
7;,
<15-
.=6+<176
);8-+<:)<17
+747:<-58
16.7:5)<176
15)/-),2=;<
3-A47+3
5=4<1;+:--6
;-4-+<57>- 5-6=
+747:<-58
+747: ;<)6,):,
;-4-+<57>- 5-6=
SOURCEMODE
PIP ON/OFF
SWAPSIZE
POSITION
MENU
SOURCEMODE
PIP ON/OFF
SWAPSIZE
POSITION
MENU
SOURCEMODE
PIP ON/OFF
SWAPSIZE
POSITION
SOURCEMODE
PIP ON/OFF
SWAPSIZE
POSITION
SOURCEMODE
PIP ON/OFF
SWAPSIZE
POSITION
SOURCEMODE
PIP ON/OFF
SWAPSIZE
POSITION
SOURCEMODE
PIP ON/OFF
SWAPSIZE
POSITION
HYUNDAI Plasma Display PD421
24
)8841+)<176;
1\LQ[XTIa[QVX]\[QOVITUWLMIVLI[XMK\ZI\QW
0W_<W,QZMK\Ta;MTMK\8QK\]ZM1VNWZUI\QWV" 8ZM[[J]\\WV
The user can immediately check the input signal and mode information.
16.7:5)<176
;7=:+- , > ,
6<;+
57,-
);8-+< ?1,-
;-4-+<57>- 5-6=
8ZM[[5MV]J]\\WV
Menu items appear on the screen.
8ZM[[=XIVL,W_VJ]\\WV[\WUW^M\WŔ.]VK\QWVŕ
8ZM[[4MN\IVL:QOP\J]\\WV
Function menu appears.
8ZM[[4MN\IVL:QOP\J]\\WV\QTT\PMUMV]
KPIVOM[QV\WC16.7:5)<176E
8ZM[[4MN\IVL:QOP\J]\\WV
Input signal, mode, and aspect ratio appear.
Press the menu button after the setting is done, and the menu goes to the
previous menu. If the button is pressed repeatedly, the menu disappears.
INPUT
SIGNAL :
Information
on
selected
input
signal.
MODE :
Information
on
the
picture
send/receive
modes.
ASPECT
RATIO :
Information
on
the
picture
size.
;-4-+<57>- 5-6=
81+<=:-
5-6=
;7=6,
.=6+<176
7;,
<15-
.=6+<176
);8-+<:)<17
+747:<-58
16.7:5)<176
15)/-),2=;<
3-A47+3
5=4<1;+:--6
;-4-+<57>- 5-6=
SOURCEMODE
PIP ON/OFF
SWAPSIZE
POSITION
MENU
SOURCEMODE
PIP ON/OFF
SWAPSIZE
POSITION
MENU
SOURCEMODE
PIP ON/OFF
SWAPSIZE
POSITION
SOURCEMODE
PIP ON/OFF
SWAPSIZE
POSITION
SOURCEMODE
PIP ON/OFF
SWAPSIZE
POSITION
SOURCEMODE
PIP ON/OFF
SWAPSIZE
POSITION
SOURCEMODE
PIP ON/OFF
SWAPSIZE
POSITION
INFO
25
)8841+)<176;
<PQ[Q[\WZML]KMQUIOMZM\MV\QWVWZVWQ[M
8ZM[[5MV]J]\\WV
Menu items appear on the screen.
8ZM[[=XIVL,W_VJ]\\WV[\WUW^M\WŔ.]VK\QWVŕ
8ZM[[4MN\IVL:QOP\J]\\WV
Function menu appears.
8ZM[[=XIVL,W_VJ]\\WV\QTT\PMUMV]
KPIVOM[QV\WC1UIOM)LR][\E
8ZM[[4MN\IVL:QOP\J]\\WV
Image Adjust menu appears.
=VLMZ8+QVX]\UWLM[MM[\MXWN\PMVM`\
XIOM
8ZM[[=XIVL,W_VJ]\\WV[\WKPWW[MIVQ\MU
8ZM[[4MN\IVL:QOP\J]\\WV\W767..
Press the menu button after the setting is done, and the menu goes to the
previous menu. If the button is pressed repeatedly, the menu disappears.
PIXEL
SHIFT :
This
is
to
avoid
the
screen
from
being
burned
in.
NOISE
REDUCE :
Eliminate
noise
created
by
unclear
input
signals.
(Sharpness may be decreased when this function is used)
;-4-+<57>- 5-6=
81+<=:-
5-6=
;7=6,
.=6+<176
7;,
<15-
.=6+<176
);8-+<:)<17
+747:<-58
16.7:5)<176
15)/-),2=;<
3-A47+3
5=4<1;+:--6
;-4-+<57>- 5-6=
15)/-),2=;<
81@-4;01.< 76
671;-:-,=+-
;-4-+<57>- 5-6=
SOURCEMODE
PIP ON/OFF
SWAPSIZE
POSITION
MENU
SOURCEMODE
PIP ON/OFF
SWAPSIZE
POSITION
MENU
SOURCEMODE
PIP ON/OFF
SWAPSIZE
POSITION
SOURCEMODE
PIP ON/OFF
SWAPSIZE
POSITION
SOURCEMODE
PIP ON/OFF
SWAPSIZE
POSITION
SOURCEMODE
PIP ON/OFF
SWAPSIZE
POSITION
SOURCEMODE
PIP ON/OFF
SWAPSIZE
POSITION
SOURCEMODE
PIP ON/OFF
SWAPSIZE
POSITION
6WQ[M:ML]KMQ[VW\[]XXWZ\MLQV8+IVL,<>QVX]\UWLM[
?PMV8Q`MT;PQN\Q[7..\PMUWLMJMKWUM[)]\W<ZIKSIVL\PMXQK\]ZMUIaNTQKSMZ
<PQ[N]VK\QWVQ[VW\XZW^QLMLQV,>1QVX]\UWLM
?PMVM`MK]\QVO8+)=<7WX\QU]UXQK\]ZMKIVJMWJ\IQVMLQN\PM[M\\QVOQ[UILM]VLMZ\PM
N]TTXI\\MZV
SOURCEMODE
PIP ON/OFF
SWAPSIZE
POSITION
SOURCEMODE
PIP ON/OFF
SWAPSIZE
POSITION
SOURCEMODE
PIP ON/OFF
SWAPSIZE
POSITION
SOURCEMODE
PIP ON/OFF
SWAPSIZE
POSITION
MENU
HYUNDAI Plasma Display PD421
26
)8841+)<176;
0W_<W,QZMK\Ta;MTMK\)]\W<ZIKS" 8ZM[[J]\\WV
Automatically adjust Horizontal/Vertical position of picture.
;IUMI[\PM[\MX[\WQV\PMXZM^QW][XIOM
8ZM[[4MN\IVL:QOP\J]\\WV[
Image Adjust menu appears.
8ZM[[=XIVL,W_VJ]\\WV\W[MTMK\IVQ\MU
8ZM[[4MN\IVL:QOP\J]\\WV[\WILR][\
Press the menu button after the setting is done, and the menu goes to the previous
menu. If the button is pressed repeatedly, the menu disappears.
HORIZONTAL
POSITION :
to
adjust
the
horizontal
position
of
the
picture.
VERTICAL
POSITION :
to
adjust
the
vertical
position
of
the
picture.
FREQUENCY :
to
adjust
to
reduce
the
noise
on
the
picture.
PHASE :
to
adjust
to
eliminate
the
shake
of
picture.
PIXEL
SHIFT :
It
moves
pixels
to
prevent
partial
image
retention.
AUTO
TRACK :
Horizontal/vertical
positions
are
automatically
adjusted.
15)/-),2=;<
087;1<176
>87;1<176
.::9=-6+A
80);-
81@-4;01.<
)=<7<:)+3
7..
;-4-+<57>- 5-6=
SOURCEMODE
PIP ON/OFF
SWAPSIZE
POSITION
PC AUTO
<PQ[Q[\WTWKS\PMKWV\ZWTJ]\\WV[WV\PMJW\\WUWN8,8
27
)8841+)<176;
8ZM[[5MV]J]\\WV
Menu items appear on the screen.
8ZM[[=XIVL,W_VJ]\\WV[\WUW^M\WŔ.]VK\QWVŕ
8ZM[[4MN\IVL:QOP\J]\\WV
Function menu appears.
8ZM[[=XIVL,W_VJ]\\WV\QTT\PMUMV]
KPIVOM[QV\WC3Ma4WKSE
8ZM[[4MN\IVL:QOP\J]\\WV\W767..
After the information is viewed, press the menu button and the menu returns to the
previous menu. If the button is pressed repeatedly, menu disappears.
OFF :
When
you
use
the
buttons
on
the
bottom
of
PDP
and
a
remote
control
at
once.
ON :
When
you
use
a
remote
control
only.
;-4-+<57>- 5-6=
81+<=:-
5-6=
;7=6,
.=6+<176
7;,
<15-
.=6+<176
);8-+<:)<17
+747:<-58
16.7:5)<176
15)/-),2=;<
3-A47+3
5=4<1;+:--6
;-4-+<57>- 5-6=
3-A47+3
3-A47+3 7..
;-4-+<57>- 5-6=
SOURCEMODE
PIP ON/OFF
SWAPSIZE
POSITION
MENU
SOURCEMODE
PIP ON/OFF
SWAPSIZE
POSITION
MENU
SOURCEMODE
PIP ON/OFF
SWAPSIZE
POSITION
SOURCEMODE
PIP ON/OFF
SWAPSIZE
POSITION
SOURCEMODE
PIP ON/OFF
SWAPSIZE
POSITION
SOURCEMODE
PIP ON/OFF
SWAPSIZE
POSITION
1N\PMXW_MZQ[\]ZVMLWNNIVLWVWZ_PMV\PMXW_MZ[]XXTaQ[K]\WNNSMaTWKSN]VK\QWV
Q[I]\WUI\QKITTaWNN
HYUNDAI Plasma Display PD421
<PQ[Q[\W[M\8188QK\]ZM1V8QK\]ZMUWLMWZ<_QVUWLM
28
)8841+)<176;
8ZM[[5MV]J]\\WV
Menu items appear on the screen.
8ZM[[=XIVL,W_VJ]\\WV[\WUW^M\WŔ.]VK\QWVŕ
8ZM[[4MN\IVL:QOP\J]\\WV
Function menu appears.
8ZM[[=XIVL,W_VJ]\\WV\QTT\PMUMV]
KPIVOM[QV\WC5]T\Q;KZMMVE
Press Left and Right button, then the menu
changes in order below.
OFF PIP TWIN
)N\MZ[M\\QVO\PQ[OW\W[\MX\W[M\\PM1VX]\
[QOVIT
PIP :
To
watch
the
Sub
screen
in
a
main
screen
at
once.
TWIN :
To
watch
two
screens
in
half
and
half.
;-4-+<57>- 5-6=
81+<=:-
5-6=
;7=6,
.=6+<176
7;,
<15-
.=6+<176
);8-+<:)<17
+747:<-58
16.7:5)<176
15)/-),2=;<
3-A47+3
5=4<1;+:--6
;-4-+<57>- 5-6=
5=4<1;+:--6
57,- 818
;>1,-7
;7=:+-
87;1<176
;1B- 4):/-
:1/0<<78
;-4-+<57>- 5-6=
SOURCEMODE
PIP ON/OFF
SWAPSIZE
POSITION
MENU
SOURCEMODE
PIP ON/OFF
SWAPSIZE
POSITION
SOURCEMODE
PIP ON/OFF
SWAPSIZE
POSITION
SOURCEMODE
PIP ON/OFF
SWAPSIZE
POSITION
SOURCEMODE
PIP ON/OFF
SWAPSIZE
POSITION
5IQV
;]J
5IQV ;]J
< PIP > < TWIN >
29
)8841+)<176;
<PQ[Q[\W[M\\PMQVX]\[QOVITTWKI\QWVIVL[QbMWN\PM;]JXQK\]ZM-`=VLMZ8+,>1IVL,<>QVX]\UWLM
0W_<W,QZMK\Ta;\IZ\5]T\Q;KZMMV"8ZM[[J]\\WV
- To ON/OFF the Multi-screen function.
8ZM[[=XIVL,W_VJ]\\WV[\WUW^M\WC;W]ZKME
Press Left and Right button, then menu changes
in order below.
OFF DVD S-VIDEO VIDEO SCART
1VKI[MWN818UWLMOW\W[\MXQNaW]VMML\W
[M\\PMCXW[Q\QWVEWN;]JXQK\]ZM
8ZM[[=XIVL,W_VJ]\\WV[\WUW^M\WC8W[Q\QWVE
Press Left and Right button, then the menu
changes in order below.
Right bottom Right top Left Top Left bottom
)N\MZ[M\\QVO\PM8W[Q\QWVOW\W[\MX!QNaW]VMML
\W[M\\PMC;QbMEWN;]JXQK\]ZM
8ZM[[=XIVL,W_VJ]\\WV[\WUW^M\WC;QbME
8ZM[[4MN\IVL:QOP\J]\\WV[\WQVKZMI[MWZ
ZML]KM\PM[QbM
After setting is done, press the menu button to return to the previous menu. If the
button is pressed repeatedly, the menu disappears.
5=4<1;+:--6
57,- 818
;>1,-7
;7=:+-
87;1<176
;1B- 4):/-
:1/0<<78
;-4-+<57>- 5-6=
5=4<1;+:--6
57,- 818
;>1,-7
;7=:+-
87;1<176
;1B- 4):/-
:1/0<<78
;-4-+<57>- 5-6=
5=4<1;+:--6
57,- 818
;>1,-7
;7=:+-
87;1<176
;1B- 4):/-
:1/0<<78
;-4-+<57>- 5-6=
SOURCEMODE
PIP ON/OFF
SWAPSIZE
POSITION
SOURCEMODE
PIP ON/OFF
SWAPSIZE
POSITION
SOURCEMODE
PIP ON/OFF
SWAPSIZE
POSITION
SOURCEMODE
PIP ON/OFF
SWAPSIZE
POSITION
SOURCEMODE
PIP ON/OFF
SWAPSIZE
POSITION
SOURCEMODE
PIP ON/OFF
SWAPSIZE
POSITION
SOURCEMODE
PIP ON/OFF
SWAPSIZE
POSITION
MENU
SOURCEMODE
PIP ON/OFF
SWAPSIZE
POSITION
HYUNDAI Plasma Display PD421
30
)8841+)<176;
0W_<W,QZMK\Ta;MTMK\5]T\Q;KZMMV" 8ZM[[J]\\WV
To watch PIP/TWIN ways.
0W_<W,QZMK\Ta;MTMK\;]JXQK\]ZM1VX]\" 8ZM[[J]\\WV
To select the Input source of Sub picture.
0W_<W,QZMK\Ta;MTMK\\PM8W[Q\QWVWN;]JXQK\]ZM"8ZM[[J]\\WV
To select the Position of Sub picture.(Right bottom Right top Left top Left bottom).
0W_<W,QZMK\Ta;MTMK\;]JXQK\]ZM;QbM" 8ZM[[J]\\WV
To adjust the Size of Sub picture.
0W_<W;_IX5IQV8QK\]ZMIVL;]J8QK\]ZM"8ZM[[J]\\WV
To swap the Main picture and sub picture.
?PMV\PMUIQVXQK\]ZMQ[8+,>1WZ,<>QVX]\UWLM[;]JXQK\]ZM[]XXWZ\,>,;>1,-7
>1,-7IVL;+):<?PMV\PMUIQVXQK\]ZMQ[,>,;>1,-7>1,-7WZ;+):<QVX]\UWLM
;]JXQK\]ZM[]XXWZ\[ITTQVX]\UWLM[
ƀ5IQVIVL[]JXQK\]ZM[KIVVW\PI^M\PM[IUMQVX]\[W]ZKM
▶Adjust the location in PIP
Adjust the size in PIP ▶
SOURCESOURCEMODE
PIP ON/OFF
SWAPSIZE
POSITION
SOURCEMODEMODE
PIP ON/OFF
SWAPSIZE
POSITION
SOURCEMODE
PIP ON/OFF
SWAPSIZE
POSITIONPOSITION
SOURCEMODE
PIP ON/OFF
SWAPSIZESIZE
POSITION
SOURCEMODE
PIP ON/OFF
SWSWAPAPSIZE
POSITION
31
)8841+)<176;
<PM
][MZ
KIV
\MUXWZIZQTa
[\WX
\PM
XTIaQVO
XQK\]ZM
8ZM[[;\QTTJ]\\WV
Playing picture is stopped.
- Under multi-screen mode(PIP, TWIN), the main picture stops.
<WLM[MTMK\;\QTTN]VK\QWV
Press Still button once more.
?PMV;\QTT.]VK\QWVKWV\QV]M[NWZUWZM\PIVUQV]\M[XQK\]ZMJMKWUM[LIZSMZ
1NaW]XZM[[;\QTTJ]\\WVWVKMUWZMI\\PQ[\QUMXQK\]ZMZM\]ZV[\W\PMVWZUITJZQOP\VM[[
SOURCEMODE
PIP ON/OFF
SWAPSIZE
POSITION
ESTILL
8ZM[[UMV]J]\\WV
Menu items appear on the screen.
8ZM[[=XIVL,W_VJ]\\WV[\WUW^M\WC7;,E
Press Left and Right button, then the menu changes in order below.
English French German Spanish
Italian Korean
8ZM[[=XIVL,W_VJ]\\WV\QTT\PMUWLM
KPIVOM[QV\WC,Q[XTIa<QUME
Press Left and Right button, then the menu changes in order below.
5secs 10secs 15secs 20secs
30secs 40secs 50secs 60secs
8ZM[[=XIVL,W_VJ]\\WV[\WUW^M\WC,85;E
8ZM[[4MN\IVL:QOP\J]\\WV\W767..
Press the menu button after the setting is done, and the menu goes to the
previous menu. If the button is pressed repeatedly, the menu disappears.
SOURCEMODE
PIP ON/OFF
SWAPSIZE
POSITION
MENU
SOURCEMODE
PIP ON/OFF
SWAPSIZE
POSITION
SOURCEMODE
PIP ON/OFF
SWAPSIZE
POSITION
SOURCEMODE
PIP ON/OFF
SWAPSIZE
POSITION
SOURCEMODE
PIP ON/OFF
SWAPSIZE
POSITION
SOURCEMODE
PIP ON/OFF
SWAPSIZE
POSITION
SOURCEMODE
PIP ON/OFF
SWAPSIZE
POSITION
MENU
SOURCEMODE
PIP ON/OFF
SWAPSIZE
POSITION
;-4-+<57>- 5-6=
81+<=:-
5-6=
;7=6,
.=6+<176
7;,
<15-
7;,
4)6/=)/- -6/41;0
,1;84)A<15-
,85; 7..
;-4-+<57>- 5-6=
7;,
4)6/=)/- -6/41;0
,1;84)A<15-
,85; 7..
;-4-+<57>- 5-6=
7;,
4)6/=)/- -6/41;0
,1;84)A<15-
,85; 7..
;-4-+<57>- 5-6=
,85;XW_MZ[I^QVOWVTaWXMZI\M[QV8+QVX]\UWLMIVL[MXIZI\M[aVK
,Q[XTIa<QUM"<PM\QUM\PI\7;,UMV]Q[LQ[XTIaMLWV\PM[KZMMV
HYUNDAI Plasma Display PD421
32
)8841+)<176;
<PQ[Q[\W[M\\PMTIVO]IOMLQ[XTIa\QUMIVL,85;XW_MZ[I^QVOWV7;,C7V;KZMMV,Q[XTIaE
-`<W[M\\W"XU
33
)8841+)<176;
8ZM[[UMV]J]\\WV
Menu items appear on the screen.
8ZM[[=XIVL,W_VJ]\\WV[\WUW^M\WC<QUME
8ZM[[4MN\IVL:QOP\J]\\WV
Time menu appears.
8ZM[[WVMUWZM\QUM
It moves to “hour”unit.
8ZM[[=XIVL,W_VJ]\\WV[\W[M\\WŔŕ
8ZM[[4MN\IVL:QOP\J]\\WV[\WUW^M\W
ŔUQV]\Mŕ]VQ\
8ZM[[=XIVL,W_VJ]\\WV[\W[M\\WŔŕ
8ZM[[4MN\IVL:QOP\J]\\WV[\WUW^M\W)585
8ZM[[=XIVL,W_VJ]\\WV[\W[M\\WŔ85ŕ
1N\PM][MZVMML[\W[M\C7V<QUM7NN<QUMEUW^M\W[\MX WV\PM
VM`\XIOM
SOURCEMODE
PIP ON/OFF
SWAPSIZE
POSITION
MENU
SOURCEMODE
PIP ON/OFF
SWAPSIZE
POSITION
SOURCEMODE
PIP ON/OFF
SWAPSIZE
POSITION
SOURCEMODE
PIP ON/OFF
SWAPSIZE
POSITION
SOURCEMODE
PIP ON/OFF
SWAPSIZE
POSITION
SOURCEMODE
PIP ON/OFF
SWAPSIZE
POSITION
SOURCEMODE
PIP ON/OFF
SWAPSIZE
POSITION
SOURCEMODE
PIP ON/OFF
SWAPSIZE
POSITION
;-4-+<57>- 5-6=
81+<=:-
5-6=
;7=6,
.=6+<176
7;,
<15-
"
)5
)57..
)57..
7..
7..
<15-
+47+3
76<15-
7..<15-
;4--8
:=6<15-
;-4-+<57>- 5-6=
"
)5
)57..
)57..
7..
7..
<15-
+47+3
76<15-
7..<15-
;4--8
:=6<15-
;-4-+<57>- 5-6=
"
85
)57..
)57..
7..
7..
<15-
+47+3
76<15-
7..<15-
;4--8
:=6<15-
;-4-+<57>- 5-6=
?PMV\PMXW_MZ[]XXTa)+UIQVXW_MZQ[K]\WNN\PMKTWKSQ[ZM[M\\W\PM^IT]MJMNWZM\PM
<QUM[M\
HYUNDAI Plasma Display PD421
<PQ[Q[\W\]ZVWVIVLWNNI\\PM\QUM\PM][MZ[M\
-`1N\PM][MZ_IV\[\W[M\"XUI[\PM\]ZVWVWZ\]ZVWNN\QUM
34
SOURCEMODE
PIP ON/OFF
SWAPSIZE
POSITION
SOURCEMODE
PIP ON/OFF
SWAPSIZE
POSITION
SOURCEMODE
PIP ON/OFF
SWAPSIZE
POSITION
SOURCEMODE
PIP ON/OFF
SWAPSIZE
POSITION
SOURCEMODE
PIP ON/OFF
SWAPSIZE
POSITION
SOURCEMODE
PIP ON/OFF
SWAPSIZE
POSITION
SOURCEMODE
PIP ON/OFF
SWAPSIZE
POSITION
SOURCEMODE
PIP ON/OFF
SWAPSIZE
POSITION
SOURCEMODE
PIP ON/OFF
SWAPSIZE
POSITION
.QZ[\Ta;M\\PMKTWKS
?PMV\PM\]ZVWV\]ZVWNN\QUMIZM[M\8W_MZ4-,Q[KPIVOMLQV\WOZMMVIVLNTQKSMZ[
)8841+)<176;
8ZM[[=XIVL,W_VJ]\\WV[\WUW^M\W
C<]ZV7V<]ZV7NN\QUME
8ZM[[4MN\IVL:QOP\J]\\WV[\WUW^M\WŔPW]Zŕ
]VQ\
8ZM[[=XIVL,W_VJ]\\WV[\W[M\\WŔŕ
8ZM[[4MN\IVL:QOP\J]\\WV[\WUW^M\W
ŔUQV]\Mŕ]VQ\
8ZM[[=XIVL,W_VJ]\\WV[\W[M\\WŔŕ
8ZM[[4MN\IVL:QOP\J]\\WV[\WUW^M\W
Ŕ)585ŕ
8ZM[[=XIVL,W_VJ]\\WV[\W[M\\WŔ85ŕ
8ZM[[4MN\IVL:QOP\J]\\WV[\WUW^M\W767..
8ZM[[=XIVL,W_VJ]\\WV[\W[MTMK\Ŕ76ŕ
1NC;TMMX<QUMZE[M\\QVOQ[VMMLMLOW\W[\MXWV\PMVM`\XIOM
"
)5
)57..
)57..
7..
7..
<15-
+47+3
76<15-
7..<15-
;4--8
:=6<15-
;-4-+<57>- 5-6=
"
"
)5
)57..
)57..
7..
7..
<15-
+47+3
76<15-
7..<15-
;4--8
:=6<15-
;-4-+<57>- 5-6=
"
)5
857..
)57..
7..
7..
<15-
+47+3
76<15-
7..<15-
;4--8
:=6<15-
;-4-+<57>- 5-6=
"
"
)5
8576
)57..
7..
7..
<15-
+47+3
76<15-
7..<15-
;4--8
:=6<15-
;-4-+<57>- 5-6=
35
)8841+)<176;
<PQ[Q[\WI]\WUI\QKITTa\]ZVWNNI\\PMXZM[M\\QUMIVL[PW_[\PM^QM_\QUM
0W_<W,QZMK\Ta;\IZ\;TMMX" 8ZM[[J]\\WV
- Press Sleep button, then the setting changes in order below.
Cancel 30 60 120 240
8ZM[[=XIVL,W_VJ]\\WV[\WUW^M\WC;TMMXE
Press Left and Right button, then the menu
changes in order below. (Unit: minute).
Cancel 30 60 120 240
1NC:]V<QUME[M\\QVOQ[VMMLMLUW^M\W[\MX!
8ZM[[=XIVL,W_VJ]\\WV[\WUW^M\WC:]V
<QUME
8ZM[[4MN\IVL:QOP\J]\\WV[\W[MTMK\767..
After setting is done, press the menu button to
return to the previous menu. If the button is pressed repeatedly,
the menu disappears.
SOURCEMODE
PIP ON/OFF
SWAPSIZE
POSITION
SOURCEMODE
PIP ON/OFF
SWAPSIZE
POSITION
SOURCEMODE
PIP ON/OFF
SWAPSIZE
POSITION
SOURCEMODE
PIP ON/OFF
SWAPSIZE
POSITION
MENU
SOURCEMODE
PIP ON/OFF
SWAPSIZE
POSITION
"
85
8576
8576
7..
<15-
+47+3
76<15-
7..<15-
;4--8
:=6<15-
;-4-+<57>- 5-6=
"
85
8576
8576
7..
<15-
+47+3
76<15-
7..<15-
;4--8
:=6<15-
;-4-+<57>- 5-6=
7VMUQV]\MJMNWZM\PMXZM[M\[TMMX\QUMŔ8W_MZWNNQVIUQV]\MŕUM[[IOM[PW_[
?PMV\PM;TMMX\QUMQ[768W_MZ4-,\]ZV[QV\WOZMMVIVLNTQKSMZ[
SOURCEMODE
PIP ON/OFF
SWAPSIZE
POSITION
SLEEP
HYUNDAI Plasma Display PD421
Cleaning and Caring .......................................................... 37
Troubleshooting ................................................................... 38
Product Specifications ........................................................ 39
HYUNDAI PLASMA DISPLAY
37
;-:>1+-
5IVIOQVO)XXMIZIVKM
?QXM_Q\P[WN\LZaKTW\PM[
Do not use inflammables like Benzene or Thinner, or wet clothes.
Do not scratch the panel of PDP with a fingernail or pointed object.
8QK\]ZM5IVIOMUMV\
8]\OTI[[KTMIVMZWVIKTMIVKTW\PIVLUWXWV\PMXQK\]ZM
Never use Acetone, Benzene, or thinner.
+TMIVQVO1V[QLM
?PMVQV[QLMVMML[\WJMKTMIVMLKWV[]T\I[MZ^QKMKMV\MZWZ
LQ[\ZQJ]\QWVIOMV\_PMZM\PMQ\MUQ[X]ZKPI[ML
Cleaning is more effective when it is done before humid monsoon season.
HYUNDAI Plasma Display PD421
38
;-:>1+-
6MQ\PMZ
XQK\]ZM
VWZ
[W]VL
KWUM[
]X
8QK\]ZM
Q[
73
J]\
[W]VL
LWM[
VW\
KWUM
W]\
:MUW\M
KWV\ZWT
LWM[
VW\
WXMZI\M
8QK\]ZM
\]ZV[
WV
[TW_Ta
IN\MZ
XW_MZ
Q[
WV
+WTWZ[
LW
VW\
[PW_
>MZ\QKIT
IVL
PWZQbWV\IT
TQVM[
IVL
_MJ
XI\\MZV[
JZQMNTa
IXXMIZ
WV
\PM
XQK\]ZM
IVL
[PISM
7VM
[XMISMZ
LWM[
VW\
XZWL]KM
[W]VL
;\ZIVOM
VWQ[M[
IZM
PMIZL
ň+PMKS_PM\PMZXW_MZQ[WV
ň+PMKS_PM\PMZ\PMXW_MZQ[K]\WZ_PM\PMZXW_MZKWZLQ[
XZWXMZTaKWVVMK\ML
ň<Za\WXT]OIVW\PMZXZWL]K\œ[XW_MZKWZL\W\PMW]\TM\\PM
8,8Q[XT]OOMLQV\W
ň<Za\WXZM[[^WT]UM]X^WT]UMLW_VJ]\\WV[WNZMUW\M
KWV\ZWT
ň+PMKS_PM\PMZ\PMZMQ[IJTWKSQVOWJRMK\JM\_MMV\PM
ZMUW\MKWV\ZWTIVL8,8
ň+PMKS_PM\PMZJI\\MZQM[IZMQV[MZ\ML_Q\PXZWXMZ
XWTIZQ\QM[
ň?PMV\PMJI\\MZQM[IZM_WZVW]\ZMXTIKM_Q\PVM_WVM[
8IOM
ň<PQ[[aUX\WUQ[VW\IUITN]VK\QWV<PQ[LMTIaQ[VW\\W[PW_
\PMVWQ[MWV\PMXQK\]ZM_PQTM\]ZVWV0W_M^MZQN\PM
XQK\]ZMLWM[VW\\]ZV[WVUWZM\PIVUQV]\M[IN\MZXW_MZ
WVKITTI[MZ^QKMKMV\MZ
ň;MTMK\+WTWZJ]\\WVIVLXZM[[=XJ]\\WV8IOM
ň;QVKM\PM[aUX\WUUIaJMKI][MLJa[\ZWVORIUUQVONZWU
PQOPNZMY]MVKaMTMK\ZWVQKMY]QXUMV\[WZW\PMZ<>MTMK\ZQK
_I^M[[\WX][QVOKWZLTM[[XPWVMPIQZLZaMZWZMTMK\ZQKLZQTT
ň;MTMK\[W]VLJITIVKMIVLUISMXZWXMZILR][\UMV\
8IOM
ň+PMKS\PM[XMISMZKWVVMK\QWVKIJTM[
ň<QKSQVOVWQ[ML]ZQVOWZIN\MZ_I\KPQVOQ[IXPMVWUMVIKI][ML
L]M\W\PMIUJQMV\MV^QZWVUMV\TQSMP]UQLQ\aIVL\MUXMZI\]ZM
KWUJQVML_Q\P\PMKPIZIK\MZQ[\QK[WNXTI[\QKXZWL]K\[
6WQ[MPMIZL_PMVaW]\]ZV767..Q[IXPMVWUMVWVUILM
_PMV[QOVITQ[IJZ]X\TaXZW^QLMLWZLQ[KWVVMK\ML\WIVLNZWU
\PM8,8XIVMT6MQ\PMZ[aUX\WUQ[IUITN]VK\QWV
;A58<75 87;;1*4-
;74=<176
39
;-:>1+-
Width(mm)
Height(mm)
Depth(mm)
Weight(kg)
Power
Pixel
Colors
Use
Temperature
Use
Humidity
1030
631(Excluding stand), 717(Including stand)
79
32(With Package), 26(Net Product)
AC 100 - 240V 50/60Hz
Horizontal 852 x Vertical 480 DOT
16,770,000 colors(256 colors for each R, G, B )
0
0
~40
0
C
Below 80%
8,
MODEL
www.hyundaiQ.com
P/N 632 0236 102 Rev.00