HYUNDAI MOBIS HA-T001 Remote Keyless Entry System User Manual 20061113 PA 433 RTTE FCC

Hyundai MOBIS Co., Ltd. Remote Keyless Entry System 20061113 PA 433 RTTE FCC

Users Manual

HYUNDAI AUTONET Co., Ltd.San 136-1, Ami-ri, Bubal-eub, Ichon-si, Kyounki-do, 467-701, KOREARemote Keyless Entry(HA-T001, HA-B001)
- INDEX -- Description of Transmitter and BCM- Block diagram from Transmitter and BCM- An outline - Circuit diagram from Transmitter and BCM
1. How to use HA-T001, HA-B001- HA-T001 & HA-B001 is Remote Keyless System.- This unit controll door lock/unlock with wireless.- This unit consist of Transmitter(HA-T001) and Receiver(HA-B001) - Every press the button, door lock and unlock is repeated.2. Introduction of Transmitter(HA-T001)- Transmitter has one button - Transmitter use the battery- Freqency is 433.92MHz- Modulation item is SAW Resonator- Transmitter use Rolling code algorithm3. Introduction of BCM(HA-B001)- Receiver control car door- Receiver has RF module(433.92MHz)- RF module use super-heterodyne circuit- Receiver control door relay ,hazard relay - Receiver has eeprom that save code4. Regulatory Information- THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES- Operation is subject to the following two conditions; (1) this device may not cause harmful interface, and (2) this device must accept any interference received, including interference that may cause undesired operation.CAUTION: Changes and modifications not expressly approved by the party respo for compliance could void the user's authority to operate the equipmenAn outline of Transmitter and BCM
1. PRIMARY FUNTION - Remote door lock/unlock- LED turn on ( When button is pushed )- Operating distance : 30 m over- Id input(setting mode)2. ELECTRICAL CHARACTERISTICS3. DESCRIPTION MODE 1) ModeB+KEYLESSACCIGSETTING 2) Id input(Setting Mode) When Setting Mode, once the button push,Operating frequencyPower 10mW under -433.92㎒Max 10mASensitivity - -117dBm(typical)model name HA-T001 HA-B001ETC AM modulation Super-heterodyneOperating temperature -20 ~ +55 ℃-20 ~ +55 ℃Consumption currentOFFNormal ModeON Description of Transmitter and BCMOperating voltage 3 VDC 10 ~ 16 VDCTRANSMITTER BCMuse equipmentID INPUT(Setting Mode)ON--OFFOFFMode- OFF
Product ; Front View Bottom ViewPCB Top View PCB Bottom View A Picture of Transmitter
Product ; TOP PATTERN BOTTOM PATTERN PCB Pattern of a Transmitter

Navigation menu