I AM PLUS IAMEP2001 Buttons User Manual User s Guid by IAM
i.am.plus, LLC Buttons User s Guid by IAM
Users Manual
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 3165022 |
| Application ID | ivTHunU2S9ayciDPtDF+QA== |
| Document Description | Users Manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 44.93kB (561633 bits) |
| Date Submitted | 2016-10-17 00:00:00 |
| Date Available | 2016-11-15 00:00:00 |
| Creation Date | 2016-09-21 09:16:00 |
| Producing Software | Acrobat Distiller 10.1.0 (Windows) |
| Document Lastmod | 2016-09-21 09:16:00 |
| Document Title | Microsoft Word - User's Guid by IAM+ |
| Document Creator | PScript5.dll Version 5.2.2 |
| Document Author: | ls |
USER GUIDE DOTS by i.am+ Bluetooth Headphones IAMEP2001 Visit PULS.com for support. English User guide Warning letter: This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. 1. 2. 3. 4. + Button • Power On 0 忏/ Pairing / Function Button - Button LED indicator Micro USB(only for charging) USB door Microphone What’s in the Box. DOTS by i.am+ Bluetooth Headphones Micro USB charging cable. Quick Start Guide User Guide Warranty Headphones operation Item Requirement and Description Power On/Off l Power On: Press and hold the Function button for 3 seconds. (release the button after the blue LED bright, the red LED and blue LED start flashing means the device enter pairing mode) l Power Off: Press and hold the Function button until the red LED light up. Red LED turn off means the device power off Pairing l First paring: Press and hold Function button for 3 sec. to power on, earphones auto-enter pairing mode - LED alternates flashing Red and White. l To paring with your PULS or phone, go to settings on your PULS or phone, make sure Bluetooth is switched on. l The ear-phones appears as “DOTS by i.am+” Select to pair. l Bluetooth pairing after a successful first pairing: n Power off then Press and hold Function button for 5 sec. to place earphones in pairing mode - LED alternates flashing Red and White, mobile phone search the Bluetooth device to connect the headphones (headphones ID is “ DOTS by i.am+ ” n If the earphones are outside Bluetooth range and disconnect from PULS or your phone, the headphones will automatically try to re-connect. If reconnection is unsuccessful for more than 5 mins, the headset will power off. l Set up use of DOTS headphones with multiple devices such as your PULS and your smartphone. 1. Pair headphones to PULS or phone 1 2. Turn off the Bluetooth on PULS phone 1, and turn on Bluetooth on phone 2 3. Search and pair the headset to phone 2 4. Turn on Bluetooth on PULS phone 1 and connect to headset Charging Open USB door “6” on controller and connect micro USB cable “5” The headset will power off then enter charging mode - LED signal red while charging Solid white when full charge is reached Use the Aneeda button on your PULS device to speak to and hear Aneeda on your Using Headphones headphones with Aneeda voice assistant LED l LED turned off when headset powered off or not charging Indication Power on: white LED on 1s Power off: red LED on 1s Pairing: LED alternates flashing Red and White Connected: white LED 0.1s on/4s off Disconnected: white LED 0.1s on 2 times/2s off Incoming call: white LED 0.5s on /0.5s off Outgoing call: white LED 0.5s on /0.5s off Active call: white LED 1s on /1s off Music play: white LED 1s on /4s off LED is changed from white blinking to Red blinking when battery low l Charging：The headset will power off and enter charging mode - LED signal red while charging, Solid white when full charge is reached. Music Mode Function Status Sound indication Operation Volume up Music or phone No call mode Press volume + Volume down Play/Pause Next song Previous song Music or phone call mode Music mode Music mode Music mode No Press volume - No No No Short press Function button Double press Function button Phone mode call Answer call Reject incoming call Hang up phone call Switch call between headset and phone Mute Incoming call Incoming call During call During call ‘Beep’ once No phone ‘Beep’ one time phone No sound Press Function button 1 time Press and hold Function button for 2 seconds sound Press Function button 1 time During phone ‘Beep’ sound call two times Cancel Mute During phone No call l Incoming call status: Double press Function button Fast press volume down button for 2 times Fast press volume up button for 2 times n When mobile phone connected to headset through Bluetooth, mobile phone will stop music player and play ring tone when have incoming call n Mobile phone to resume playing music after hanging up phone call l 3 party phone call: - Short press Function button to connect the waiting phone call and hang off current call - Long press 1s the Function button to connect the waiting phone call and hold current call. Long press 1s again to switch the two phone call status § 15.19 Labeling requirements. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. § 15.21 Information to user. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. § 15.105 Information to the user. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -Reorient or relocate the receiving antenna. -Increase the separation between the equipment and receiver. -Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -Consult the dealer or an experienced radio/TV technician for help. The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction. This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: (1) This device may not cause interference, and (2) This device must accept any interference, including interference that may cause undesire d operation of the device. Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes: (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement.
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.5 Linearized : Yes Author : ls Create Date : 2016:09:21 09:16:00+08:00 Modify Date : 2016:09:21 09:16:00+08:00 XMP Toolkit : Adobe XMP Core 5.2-c001 63.139439, 2010/09/27-13:37:26 Creator Tool : PScript5.dll Version 5.2.2 Format : application/pdf Title : Microsoft Word - User's Guid by IAM+ Creator : ls Producer : Acrobat Distiller 10.1.0 (Windows) Document ID : uuid:db9fbff5-a837-4eca-ab6b-7f37b17e4d85 Instance ID : uuid:34ba3910-5298-4a9d-bf67-1a5c329dfbc3 Page Count : 6EXIF Metadata provided by EXIF.tools