I Tel 0301 2.4GHz 40 Channel Cordless Dual Hanset Telephone User Manual

Download:
Mirror Download [FCC.gov]
Document ID	312575
Application ID	W3q2VBN3YdN+xL/PhHxQig==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	73.9kB (923747 bits)
Date Submitted	2003-03-24 00:00:00
Date Available	2003-03-24 00:00:00
Creation Date	2003-03-05 11:55:24
Producing Software	Acrobat 4.0 Scan Plug-in for Windows
Document Lastmod	2003-03-05 12:19:40
Document Title	User Manual
Document Creator	Acrobat 4.0 Scan Plug-in for Windows

FCC WANTS YOU TO KNOW
This equipment complies with Part 68 of the FCC rules and the requirements
adopted by the ACTA.On the bottom of this equipment is a label that contains,
among
other
information,
product
identifier
in
the
format
US:47GW902BGH3210US.If required, This number must be provided to the
telephone company .
An FCC compliant telephone cord and modular plug is provided with this
equipment. This equipment is designed to be connected to the telephone network
or premises wiring using a compatible modular jack which is Part 68 compliant. See
Installation Instructions for details.
The REN is used to determine the number of devices that may be connected to a
telephone line. Excessive RENs on a telephone line may result in the devices not
ringing in response to an incoming call. In most but not all areas, the sum of the
RENs should not exceed five (5.0). To be certain of the number of devices that may
be may connect to a line, as determined by the total RENs, contact the local
telephone company(For products approved after July 23,2001,the REN for this
product is part of the product identifier that has the format US:
47GW902BGH3210US.The digits represented by02 are the REN without a decimal
point(e.g.,03 is a REN of 0.3).For earlier products, the REN is separately shown on
the label.
If your telephone equipment causes harm to the telephone network, the telephone
company may discontinue your service temporarily. If possible, they will notify you
in advance. But if advance notice isn’t practical, you will be notified as soon as
possible. You will be informed of your right to file a complaint with the FCC. Your
telephone company may make changes in its facilities, equipment, operations, or
procedures that could affect the proper functioning of your equipment. If they do,
you will be notified in advance to give you an opportunity to maintain uninterrupted
telephone service. If you experience trouble with this telephone equipment,
disconnect from the network until the problem has been corrected or until you are
sure that the equipment is not malfunctioning.
This equipment may not be used on coin service provided by the telephone
company. Connection to party lines is subject to state tariffs.
The USOC number of the registration jack for the equipment is RJ11C.
This equipment is hearing aid compatible.
Warning: Changes or modifications to this unit not expressly approved by the
party responsible for compliance could void the user’s authority to operate the
equipment.
NOTE: This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. Some cordless telephones operate at frequencies that may
cause interference to nearby TV’s and VCR’s. To minimize or prevent such
interference, the base of the cordless telephone should not be placed near or on
top of a TV or VCR. If interference is experienced, moving the cordless telephone
farther away from the TV or VCR will often reduce or eliminate the interference.
However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the user
is encouraged to try to correct the interference by one or more of the following
measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
. • Consult the dealer or an experienced radio TV technician for help.
-9-
NOTICE: I f y o u r h o m e h a s s p e c i a l l y w i r e d a l a r m e q u i p m e n t c o n n e c t e d
to the telephone line,ensure the installation of this GH3210 does not
disable your alarm equipment. If you have questions about what will disable
alarm equipment ,consult your telephone company or qualified installer .
INTRODUCTION
About the GH3210
The GH3210 is a 2.4GHz Cordless Phone with Caller Identifier . It is designed and
engineered to exacting standards for reliability, long life, and outstanding
performance.
FEATURES
• Caller ID (50 call data memory locations) with call waiting
• 40 Channels (auto or manual selection)
• Conference / Intercom
• 10-Number One-touch Dial Memory
• Direct dialing from caller list
• Extended battery life
• Digital security coding
The GH3210 features include AutoTalk™ and AutoStandby™.
AutoTalk™ allows you to answer a call by just removing the Handset from the Base
so you don’t have to waste time pushing buttons or flipping switches.
AutoStandby™ allows you to hang up by simply returning the handset to the Base.
The UltraClear Plus™ true compander circuitry virtually eliminates background
noise. This innovative technology, together with 40 different channels, provides
you with the best possible reception during all your conversations.
TO PROTECT YOU AGAINST MISBILLED CALLS, THE GH3210 HAS RANDOM CODE™
DIGITAL SECURITY WHICH AUTOMATICALLY SELECTS ONE OF OVER 65,000
DIGITAL SECURITY CODES FOR THE HANDSET AND BASE UNIT. ALSO, THE
AUTOSECURER™ FEATURE ELECTRONICALL Y LOCKS YOUR PHONE WHEN THE
HANDSET IS IN THE BASE. TO GET THE MOST FROM YOUR GH3210, PLEASE READ
THIS OPERATING GUIDE THOROUGHLY.
- 10 -


---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.3
Linearized                      : No
Modify Date                     : 2003:03:05 12:19:40+08:00
Create Date                     : 2003:03:05 11:55:24+08:00
Creator                         : Acrobat 4.0 Scan Plug-in for Windows
Producer                        : Acrobat 4.0 Scan Plug-in for Windows
Page Count                      : 31

EXIF Metadata provided by EXIF.tools