ICOM orporated 287900 Communication Receiver User Manual

ICOM Incorporated Communication Receiver

a href="https://usermanual.wiki/ICOM-orporated" itemprop="url"> ICOM orporated >

User Manual

INSTRUCTION MANUALiR2500COMMUNICATION RECEIVERThis device complies with Part 15 of the FCC rules. Operation is sub-ject to the following two conditions: (1) This device may not causeharmful interference, and (2) this device must accept any interferencereceived, including interference that may cause undesired operation.
iFOREWORDThank you for purchasing this Icom product. The IC-R2500VHF/UHF FM RECEIVERis designed and built with Icom’s supe-rior technology and craftsmanship. With proper care, this prod-uct should provide you with years of trouble-free operation.We want to take a couple of moments of your time to thankyou for making your IC-R2500 your radio of choice, and hopeyou agree with Icom’s philosophy of “technology first.” Manyhours of research and development went into the design ofyour IC-R2500.DDFEATURES❍Wide frequency coverage with all mode re-ceive❍Both Remote controller operation and PCcontrol application are available❍ANF and NR functions are available (Onlywhen the optional DSP unit is installed.)❍IF shift functionIMPORTANTREAD ALL INSTRUCTIONS carefully and completelybefore using the receiver.SAVE THIS INSTRUCTION MANUAL— This in-struction manual contains important operating instructions forthe IC-R2500.EXPLICIT DEFINITIONSWORD DEFINITIONRWARNING!CAUTIONNOTEPersonal injury, fire hazard or electric shockmay occur.Equipment damage may occur.Recommended for optimum use. No risk ofpersonal injury, fire or electric shock.Icom, Icom Inc. and the logo are registered trademarks of IcomIncorporated (Japan) in the United States, the United Kingdom, Ger-many, France, Spain, Russia and/or other countries.
RWARNING! NEVER connect the receiver via the OPC-254L to an AC outlet. This may pose a fire hazard or result in an elec-tric shock.RWARNING! NEVER operate the receiver while driving avehicle. Safe driving requires your full attention— anything less mayresult in an accident.NEVER connect the receiver to a power source of more than 14 VDC. This will damage the receiver.NEVER connect the receiver to a power source using reverse po-larity. This will damage the receiver.NEVER cut the DC power cable between the DC plug and fuseholder. If an incorrect connection is made after cutting, the receivermay be damaged.NEVER expose the receiver to rain, snow or any liquids. The re-ceiver may be damaged.NEVER operate or touch the receiver with wet hands. This mayresult in an electric shock or damage the receiver.NEVER place the receiver where normal operation of the vehiclemay be hindered or where it could cause bodily injury.NEVER let objects impede the operation of the cooling fan on therear panel.AVOID using or placing the receiver in direct sunlight or in areaswith temperatures below –10°C (+14°F) or above +60°C (+140°F).BE CAREFUL! The receiver will become hot when operating itcontinuously for long periods.AVOID setting the receiver in a place without adequate ventilation.Heat dissipation may be affected, and the receiver may be damaged.AVOID the use of chemical agents such as benzine or alcoholwhen cleaning, as they can damage the receiver’s surfaces.For U.S.A. onlyCAUTION: Changes or modifications to this device, not ex-pressly approved by Icom Inc., could void your authority tooperate this device under FCC regulations.iiPRECAUTION
Download:
Mirror Download [FCC.gov]
Document ID651046
Application ID6AAJLTPvLH+VifgvEUnxoQ==
Document DescriptionUser Manual
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize230.6kB (2882472 bits)
Date Submitted2006-04-26 00:00:00
Date Available2006-04-25 00:00:00
Creation Date2006-02-23 02:28:31
Producing SoftwareAcrobat Distiller 5.0.5 for Macintosh
Document Lastmod2006-04-10 10:20:23
Document TitleUser Manual
FCC ID Filing: AFJ287900

Navigation menu