ICOM orporated 306600 VHF/UHF Digital Transceiver User Manual

ICOM Incorporated VHF/UHF Digital Transceiver IC 92A AD indd

a href="https://usermanual.wiki/ICOM-orporated" itemprop="url"> ICOM orporated >

user manual

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.WARNING: MODIFICATION OF THIS DEVICE TO RECEIVE CEL-LULAR RADIOTELEPHONE SERVICE SIGNALS IS PROHIBITED UNDER FCC RULES AND FEDERAL LAW. INSTRUCTION MANUALNew2001Y- The above photo shows IC-92AD.i92AVHF/UHF FM TRANSCEIVERi92ADVHF/UHF DIGITAL TRANSCEIVER
iNew2001FOREWORDThank you for purchase of this fine Icom product. We un-derstand you have a choice of many different radios in the market place. Many hours of research and development went into the design of your IC-92A/92AD, following Icom’s philosophy of “technology fi rst.” The IC-92A/92AD VHF/UHF FM TRANSCEIVER is designed with Icom’s superior technology and craftsmanship combining traditional analog technologies with the new digital D-STAR technologies for a balanced packaged. With proper care, this product should provide you with years of trouble-free operation. We want to take a couple of mo-ments of your time to thank you for making your IC-92A/92AD your radio of choice, and hope you agree with Icom’s philosophy of “technology fi rst.” EXPLICIT DEFINITIONSFEATURES❍  DV mode (Digital voice + Low-speed data communication) operation is ready  – GPS receiver connection  – Text message and call sign exchange (Optional UT-121 DIGITAL UNIT is required for IC-92A.)❍ Simple band scope ❍ Dualwatch operation ❍ Optional PC remote control IMPORTANTREAD ALL INSTRUCTIONS carefully and completely before using the transceiver.SAVE THIS INSTRUCTION MANUAL— This in-struction manual contains important operating instructions for the IC-92A/92AD. WORD DEFINITION R-WARNING!  CAUTION NOTEPersonal injury, fire hazard or electric shock may occur.Equipment damage may occur.Recommended for optimum use. No risk of personal injury, fi re or electric shock.Icom, Icom Inc. and the         logo are registered trademarks of Icom Incorporated (Japan) in the United States, the United Kingdom, Germany, France, Spain, Russia and/or other countries.
12345678910111213141516RWARNING RF EXPOSURE! This device emits Radio Frequency (RF) energy. Caution should be observed when operating this device. If you have any questions re-garding RF exposure and safety standards please refer to the Federal Communications Commission Office of Engi-neering and Technology’s report on Evaluating Compliance with FCC Guidelines for Human Radio Frequency Electro-magnetic Fields (OET Bulletin 65)RWARNING! NEVER hold the transceiver so that the antenna is very close to, or touching exposed parts of the body, especially the face or eyes, while transmitting. The transceiver will perform best if the microphone is 5 to 10 cm (2 to 4-inches) away from the lips and the transceiver is verti-cal.RWARNING! NEVER operate the transceiver with a earphone, headphones or other audio accessories at high volume levels. Hearing experts advise against continuous high volume operation. If you experience a ringing in your ears, reduce the volume level or discontinue use.RWARNING! NEVER operate the transceiver while driving a vehicle. Safe driving requires your full attention—anything less may result in an accident.NEVER connect the transceiver to a power source of more than 16 V DC. This will ruin the transceiver.NEVER connect the transceiver to a power source using reverse polarity. This will ruin the transceiver.NEVER expose the transceiver to rain, snow or any liq-uids. The transceiver may be damaged.NEVER operate or touch the transceiver with wet hands. This may result in an electric shock or damage the trans-ceiver.DO NOT operate the transceiver near unshielded electri-cal blasting caps or in an explosive atmosphere.DO NOT push the PTT when not actually desiring to trans-mit.BE CAREFUL! The transceiver will become hot when operating it continuously for long periods.DO NOT use or place the transceiver in direct sunlight or in areas with temperatures below –20°C (–4˚F) or above +60°C (+140˚F).Place the unit in a secure place to avoid inadvertent use by children.DO NOT use of chemical agents such as benzine or al-cohol when cleaning, as they can damage the transceiver’s surfaces.For U.S.A. onlyCAUTION!: Changes or modifications to this device, not expressly approved by Icom Inc., could void your authority to operate this device under FCC regulations.171819iiPRECAUTIONS
Download:
Mirror Download [FCC.gov]
Document ID882334
Application IDPSW3ErHpptqwkdqfqpim3A==
Document Descriptionuser manual
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize218.12kB (2726453 bits)
Date Submitted2007-12-20 00:00:00
Date Available2007-12-26 00:00:00
Creation Date2007-11-15 11:31:44
Producing SoftwareAcrobat Distiller 8.1.0 (Windows)
Document Lastmod2007-12-06 12:20:37
Document TitleIC-92A_AD.indd
Document CreatorPScript5.dll Version 5.2
Document Author: i29319
FCC ID Filing: AFJ306600

Navigation menu