ICOM orporated 307400 VHF Air Band Transceiver User Manual

ICOM Incorporated VHF Air Band Transceiver IC A14 S Instruction Manual

a href="https://usermanual.wiki/ICOM-orporated" itemprop="url"> ICOM orporated >

Manual

INSTRUCTION MANUALiA14iA14SVHF AIR BAND TRANSCEIVERThis device complies with Part 15 of the FCC Rules. Operation is subject to the condition that this device does not cause harmful inter-ference.YIC-A14 YIC-A14S
iSAFETY TRAINING INFORMATIONW AR N IN GYour Icom radio generates RF electromagnetic energy dur-ing transmit mode. This radio is designed for and classified as “Occupational Use Only”, meaning it must be used only during the course of employment by individuals aware of the hazards, and the ways to minimize such hazards. This radio is NOT intended for use by the “General Population” in an uncontrolled environment.This radio has been evaluated for compliance at the distance of 2.5 cm with the FCC RF exposure limits for “Occupational Use Only”. In addition, your Icom radio complies with the following Standards and Guidelines with regard to RF energy and electromagnetic energy levels and evaluation of such levels for exposure to humans: • FCC OET Bulletin 65 Edition 97-01 Supplement C, Evaluating Com-pliance with FCC Guidelines for Human Exposure to Radio Frequency Electromagnetic Fields. • American National Standards Institute (C95.1-1992), IEEE Standard for Safety Levels with Respect to Human Exposure to Radio Frequency Electromagnetic Fields, 3 kHz to 300 GHz. • American National Standards Institute (C95.3-1992), IEEE Recom-mended Practice for the Measurement of Potentially Hazardous Electro-magnetic Fields– RF and Microwave. • The following accessories are authorized for use with this product. Use of accessories other than those specified may result in RF exposure lev-els exceeding the FCC requirements for wireless RF exposure.; Belt Clip (MB-94/96F) and Rechargeable Li-ion Battery Pack (BP-230N/232N).To ensure that your expose to RF electromagnetic en-ergy is within the FCC allowable limits for occupational use, always adhere to the following guidelines: • DO NOT operate the radio without a proper antenna attached, as this may damage the radio and may also cause you to exceed FCC RF ex-posure limits. A proper antenna is the antenna supplied with this radio by the manufacturer or antenna specifically authorized by the manufac-turer for use with this radio. • DO NOT transmit for more than 50% of total radio use time (“50% duty cycle”). Transmitting more than 50% of the time can cause FCC RF ex-posure compliance requirements to be exceeded. The radio is transmit-ting when “ ” appears on the function display. You can cause the radio to transmit by pressing the “PTT” switch. • ALWAYS keep the antenna at least 2.5 cm (1 inch) away from the body when transmitting and only use the Icom belt-clips which are listed on page 36 when attaching the radio to your belt, etc., to ensure FCC RF exposure compliance requirements are not exceeded. To provide the re-cipients of your transmission the best sound quality, hold the antenna at least 5 cm (2 inches) from your mouth, and slightly off to one side.The information listed above provides the user with the information needed to make him or her aware of RF exposure, and what to do to assure that this radio operates with the FCC RF exposure limits of this radio.Electromagnetic Interference/CompatibilityDuring transmissions, your Icom radio generates RF energy that can possibly cause interference with other devices or systems. To avoid such interference, turn off the radio in areas where signs are posted to do so. DO NOT operate the transmitter in areas that are sensitive to electromagnetic radiation such as hospitals and blasting sites.Occupational/Controlled UseThe radio transmitter is used in situations in which persons are exposed as consequence of their employment provided those persons are fully aware of the potential for exposure and can exercise control over their exposure.C AU T IO N
iiFOREWORDThank you for purchasing this Icom product. The IC-A14/S VHF AIR BAND TRANSCEIVER is designed and built with Icom’s state of the art technology and craftsmanship. With proper care this product should provide you with years of trouble-free operation.IMPORTANTREAD ALL INSTRUCTIONS carefully and completely before using the transceiver.SAVE THIS INSTRUCTION MANUAL— This in-struction manual contains important operating instructions for the IC-A14/S.EXPLICIT DEFINITIONSSUPPLIED ACCESSORIES The following accessories are supplied with the transceiver. Qty.q Flexible antenna ............................................................. 1w Battery pack ................................................................... 1e Belt clip .......................................................................... 1r Hand strap ..................................................................... 1t Battery charger .............................................................. 1y AC adapter ..................................................................... 1WORD DEFINITIONRWARNINGCAUTIONNOTEPersonal injury, fire hazard or electric shock may occur.If disregarded, inconvenience only. No risk of personal injury, fire or electric shock.Equipment damage may occur.q wt yer
Download:
Mirror Download [FCC.gov]
Document ID899013
Application ID3suFyBraHFKyV+gd9JZnMQ==
Document DescriptionManual
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize242.63kB (3032826 bits)
Date Submitted2008-02-05 00:00:00
Date Available2008-02-07 00:00:00
Creation Date2008-01-11 15:25:43
Producing SoftwareAdobe PDF Library 7.0
Document Lastmod2008-01-11 15:27:13
Document TitleIC-A14/S Instruction Manual
Document CreatorAdobe InDesign CS2_J (4.0.5)
Document Author: Icom Inc.
FCC ID Filing: AFJ307400

Navigation menu