ICOM orporated 307801 UHF P25 Trunking Handheld Transceiver User Manual SP 27 Instruction Manual
ICOM Incorporated UHF P25 Trunking Handheld Transceiver SP 27 Instruction Manual
Contents
- 1. User Manual
- 2. Updated User Manual
- 3. Accessory Specs
- 4. Updated Manual
Accessory Specs
![INSTRUCTIONSACC ADAPTERAD-118Thank you for purchasing the AD-118 acc adapter.Please read these instructions thorough-ly before using the AD-118.PRECAUTIONSCAUTION: NEVER expose the adapter and the connected transceiver to rain, snow or any liquids.NEVER disassemble the adapter. The adapt-er contains no user-serviceable parts.DO NOT use harsh solvents such as ben-zine or alcohol to clean the adapter, because they can damage the adapter’s surfaces.BE SURE to attach the socket cover when the accessory is not connected.Use only the recommended accessories*. Connection to other equipment may cause problems, such as;• Audio does not output correctly.• The transceiver does not detect the con-nected accessory.• The PTT switch of the connected acces-sory is disabled.* See the back page for details of the recom-mended accessories.DESCRIPTIONSocket coverqweq ACCESSORY SOCKET Connects to the recommended acces-sories. See the back page for details of the rec-ommended accessories, pin assign-ments and connections.w PTT SWITCH Hold down to transmit; release to receive. • While holding down this switch, speak into the microphone of the accessory at a nor-mal voice level.e CONTACT PINS Contacts with the transceiver’s multi connector. See the back page for details of the pin assignments and connections.SUPPLIED ACCESSORYFerrite core( See the back page for details.)Icom, Icom Inc. and the Icom logo are registered trademarks of Icom Incorporated (Japan) in Japan, the United States, United Kingdom, Germany, France, Spain, Russia and/or other countries.](https://usermanual.wiki/ICOM-orporated/307801.Accessory-Specs/User-Guide-1269276-Page-1.png)
![1-1-32 Kamiminami, Hirano-ku, Osaka 547-0003, Japan. A-6827X-1EX Printed in Taiwan© 2010 Icom Inc.RECOMMENDED ACCESSORIES• V4-10148 : Noise cancelling over-the-head headset• V4-10001 : Noise cancelling behind-the-head headset• V4-BA2MD1 : Light weight behind-the-head headsetPIN ASSIGNMENTS AND CONNECTIONSAD-118 TransceiverAccessory socket Contact pins Multi connectoryt qr e wetyqrwiyuowqFrontqwertywioyquExternal Mic. inputExternal Mic. powerExternal Speaker (+)GroundExternal PTT inputACC detectionAD-118 Transceiver2.2 kø1 ½F5.1 V(Top panel view) (Side panel view) (Side panel view)To the AD-118Ferrite corePTT SwitchTo the HeadsetThe ferrite core that comes with the AD-118 must be attached to the headset side cable of the V4-BA2MD1, as close to the PTT switch as possible.It is not necessary to attach the ferrite core to the V4-10148 and V4-10001.FERRITE CORE ATTACHMENTMake sure to twist the cable around the ferrite core.](https://usermanual.wiki/ICOM-orporated/307801.Accessory-Specs/User-Guide-1269276-Page-2.png)