ICOM orporated 316800 VHF Marine Transceiver User Manual

ICOM Incorporated VHF Marine Transceiver

a href="https://usermanual.wiki/ICOM-orporated" itemprop="url"> ICOM orporated >

User Manual

INSTRUCTION MANUALiM36VHF MARINE TRANSCEIVERThis device complies with Part 15 of the FCC Rules. Operation is subject to the condition that this device does not cause harmful interference.
iYour Icom radio generates RF electromagnetic energy during transmit mode. This radio is designed for and classified as  “General Population Use” in an uncontrolled environment.This radio has been evaluated for compliance at the distance of 2.5 cm (1 inch) with the FCC RF exposure limits for “Gen-eral Population Use”. In addition, your Icom radio complies with the following Standards and Guidelines with regard to RF energy and electromagnetic energy levels and evaluation of such levels for exposure to humans:  •  FCC OET Bulletin 65 Edition 01-01 Supplement C, Evaluating Compli-ance with FCC Guidelines for Human Exposure to Radio Frequency Electromagnetic Fields.  •  American National Standards Institute (C95.1-2005), IEEE Standard for Safety Levels with Respect to Human Exposure to Radio Frequency Electromagnetic Fields, 3 kHz to 300 GHz.  •  American National Standards Institute (C95.3-2002), IEEE Recom-mended Practice for the Measurement of Potentially Hazardous Electro-magnetic Fields– RF and Microwave.  •  The following accessories are authorized for use with this product. Use of accessories other than those specified may result in RF exposure levels exceeding the FCC requirements for wireless RF exposure.; Belt Clip (MB-109), Rechargeable Li-Ion Battery Pack (BP-252) and Alkaline Bat-tery Case (BP-251).To ensure that your expose to RF electromagnetic en-ergy is within the FCC allowable limits for general popu-lation use, always adhere to the following guidelines:  •  DO NOT operate the radio without a proper antenna attached, as this may damaged the radio and may also cause you to exceed FCC RF ex-posure limits. A proper antenna is the antenna supplied with this radio by the manufacturer or antenna specifically authorized by the manufacturer for use with this radio.  •  DO NOT transmit for more than 50% of total radio use time (“50% duty cycle”). Transmitting more than 50% of the time can cause FCC RF expo-sure compliance requirements to be exceeded. The radio is transmitting when the “transmit indicator” appears on the LCD. You can cause the radio to transmit by pressing the “PTT” switch.  •  ALWAYS keep the antenna at least 2.5 cm (1 inch) away from the body when transmitting and only use the Icom belt-clips which are listed on p. 28 when attaching the radio to your belt, etc., to ensure FCC RF exposure compliance requirements are not exceeded. To provide the re-cipients of your transmission the best sound quality, hold the antenna at least 5 cm (2 inches) from your mouth, and slightly off to one side.The information listed above provides the user with the information needed to make him or her aware of RF exposure, and what to do to assure that this radio operates with the FCC RF exposure limits of this radio.Electromagnetic Interference/CompatibilityDuring transmissions, your Icom radio generates RF energy that can possibly cause interference with other devices or systems. To avoid such interference, turn off the radio in areas where signs are posted to do so. DO NOT operate the transmitter in areas that are sensitive to electromagnetic radiation such as hospitals, aircraft, and blasting sites.iSAFETY TRAINING INFORMATIONW AR N IN GC AU T IO N
iiIN CASE OF EMERGENCY RECOMMENDATIONIf your vessel requires assistance, contact other vessels and the Coast Guard by sending a distress call on Channel 16.❍ USING CHANNEL 16DISTRESS CALL PROCEDURE1. “MAYDAY MAYDAY MAYDAY.”2. “THIS IS   ……………… ” (name of vessel)3.  Your call sign or other indication of the ves-sel.4. “LOCATED AT  …………… ” (your position)5.  The nature of the distress and assistance required.6.  Any other information which might facilitate the rescue.CLEAN THE TRANSCEIVER THOROUGHLY WITH FRESH WATER after exposure to saltwater, and dry it before opera-tion. Otherwise, the transceiver's keys, switches and control-lers may become unusable due to salt crystallization.NOTE: DO NOT wash the transceiver in water if there is any reason to suspect the waterproof protection may not be ef-fective. For example, in cases where the battery pack rubber seal is damaged, the transceiver/battery pack is cracked or broken, or has been dropped, or when the battery pack is detached from the transceiver.
Download:
Mirror Download [FCC.gov]
Document ID1029019
Application IDUEblgm2cGUiNilVOZw6n7A==
Document DescriptionUser Manual
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize155.01kB (1937673 bits)
Date Submitted2008-11-12 00:00:00
Date Available2009-01-05 00:00:00
Creation Date2008-11-11 13:44:05
Producing SoftwareAdobe PDF Library 7.0
Document Lastmod2008-11-11 12:36:52
Document TitleUser Manual
Document CreatorAdobe InDesign CS2_J (4.0.5)
FCC ID Filing: AFJ316800

Navigation menu