ICOM orporated 356100 UT-133 User Manual Short term Confidential Users Manual for OEM

ICOM Incorporated UT-133 Short term Confidential Users Manual for OEM

Contents

(Short term Confidential)Users Manual for OEM

Installation Manual
㻌
In case this module is installed to host device by manufacturer please note following
requirement.
- For the details about this module, please refer to the specification sheet of module.
- This module should be installed in the host device according to the interface specification
(installation procedure).
This module should be provided to specified OEM integrator including our own use, as it has not RF shielding,
The following information must be indicated on the host device of this module;
[for FCC]㻌
㻌
Contains FCC ID: AFJ356100
This device complies with part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1)
T
his device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that
may cause undesired operation.
*If it is difficult to describe this statement on the host product due to the size, please describe in
the User's manual.
[for IC]
㻌
Contains IC: 202D-356100
The following statements must be described on the user manual of the host device of this
module;
㻌
[for FCC]㻌
㻌
㻌
&$87,21
Changes or modifications to this device, not expressly
approved by Icom Inc., could void your authority to
operate this device under FCC regulations.
This transmitter must not be
co-located or operated in conjunction
with any other antenna or transmitter.
Cet émetteur ne doit pas être co
-localisé ou fonctionner en
conjonction avec une autre antenne ou émetteur
For Mobile use
㻌
This equipment complies with FCC/IC radiation
exposure
limits set forth for an uncontrolled environment
and meets
the FCC radio frequency (RF) Exposure Guidelines and RSS-
102 of the IC radio frequency
(RF) Exposure rules. This
equipment has very low levels of RF energy that it deemed
to comply without
maximum permissive exposure evaluation
(MPE).
Cet équipement est conforme aux limites d’exposition aux
rayonnements énoncées pour
unenvironnement non contrôlé
et respecte les règles les radioélectriques (RF) de la FCC
lignes directrices
d’exposition et
d’exposition aux frequencies radioélectriques (RF) CNR-102 de l’IC. Cet équipement
émet une énergie RF très faible qui est considérée conforme
sans évaluation de l’exposition maximale
autorisée.
For Portable use
This equipment complies with FCC/IC radiat
ion exposure
limits set forth for an uncontrolled environment
and meets
the FCC radio frequency (RF) Exposure Guidelines and RSS-
102 of the IC radio frequency
(RF) Exposure rules. This
equipment has very low levels of RF energy that are deemed to comply wi
thout
testing of specific absorption ratio (SAR).
Cet équipement est conforme aux limites d’exposition aux
rayonnements énoncées pour un
environnement non contrôlé
et respecte les règles les radioélectriques (RF) de la FCC
lignes directrices
d’exposition
et d’exposition aux frequencies radioélectriques (RF) CNR-
102 de l’IC. Cet équipement émet
une énergie RF très faible qui est considérée conforme sans
évaluation du débit d’absorption spécifique
(DAS).
㻌㻌
㻌
This device complies with Part 15 of FCC and
Industry Canada licence-exempt RSS standard(s).
Operation is subject to
the following two conditions: (1) this device may not cause interference,
and (2) this device must accept any interference,
including interference that may cause undesired
operation
of the device.
Le présent appareil est conforme aux la partie 15 des règles
de la FCC et CNR d'Industrie Canada
applicables aux appareils
radio exempts de licence. L'exploitation est autorisée
aux deux conditions suivantes : (1) l'appareil ne doit pas
produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter
tout brouillage radioélectrique subi, même si le brouillage
est susceptible d'en compromettre le fonctionnement.
ವ
ವ )25&/$66%81,17(17,21$/5$',$7256
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to
part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may cause harmful interference
to radio communications. However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the interference by
one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician
for help.

Navigation menu