ICOM orporated 366301 UHF Digital Transceivers User Manual 1
ICOM Incorporated UHF Digital Transceivers 1
Contents
- 1. User Manual 1
- 2. User Manual 2
User Manual 1
WORD DEFINITION
RDANGER! Personal death, serious injury or an explosion may occur.
RWARNING! Personal injury, fire hazard or electric shock may occur.
CAUTION Equipment damage may occur.
NOTE If disregarded, inconvenience only. No risk of personal injury, fire or electric shock.
Thank you for choosing the IC-F3360DT/IC-
F3360DS V H F DIG IT AL T R A N S C E I V E R S or IC-F4360DT/
IC-F4360DS UHF DI GITAL T R A N S C E I V E R S .
READ ALL PRECAUTIONS carefully and complete-
ly before using the transceiver.
1-1-32 Kamiminami, Hirano-ku, Osaka 547-0003, Japan A-7144?-1EX Printed in Japan
© 2014 Icom Inc.
PRECAUTIONS
VHF DIGITAL TRANSCEIVERS
Iç-F4360D series
UHF DIGITAL TRANSCEIVERS
Iç-F3360D series
Misuse of Li-ion batteries may result in the following haz-
ards: smoke, fire, or the battery may rupture. Misuse can
also cause damage to the battery or degradation of battery
performance.
R DANGER! NEVER short terminals (or charging ter-
minals) of the battery pack. Also, current may flow into nearby
metal objects such as a necklace, so be careful when placing
battery packs (or the radio) in handbags, etc.
Simply carrying with or placing near metal objects such as
a necklace, etc. may cause shorting. This may damage not
only the battery pack, but also the radio.
R DANGER! DO NOT hammer or otherwise impact the
battery. Do not use the battery if it has been severely impact-
ed or dropped, or if the battery has been subjected to heavy
pressure. Battery damage may not be visible on the outside
of the case. Even if the surface of the battery does not show
cracks or any other damage, the cells inside the battery may
rupture or catch fire.
R DANGER! NEVER use or leave battery pack in areas
with temperatures above +60°C (+140°F). High temperature
buildup in the battery, such as could occur near fires or stoves,
inside a sun heated car, or in direct sunlight may cause the
battery to rupture or catch fire. Excessive temperatures may
also degrade battery performance or shorten battery life.
R DANGER! DO NOT expose the battery to rain, snow,
seawater, or any other liquids. Do not charge or use a wet
battery. If the battery gets wet, be sure to wipe it dry before
using.
R DANGER! KEEP battery packs away from fire. Fire or
heat may cause them to rupture or explode. Dispose of used
battery packs in accordance with local regulations.
R DANGER! NEVER solder the battery terminals, or
NEVER modify the battery pack. This may cause heat gen-
eration, and the battery may burst, emit smoke or catch fire.
R DANGER! Use the battery only with the radio for which
it is specified. Never use a battery with any other equipment,
or for any purpose that is not specified in this instruction
manual.
R DANGER! If fluid from inside the battery gets in your
eyes, blindness can result. Rinse your eyes with clean water,
without rubbing them, and see a doctor immediately.
R WARNING! Immediately stop using the battery if it
emits an abnormal odor, heats up, or is discolored or de-
formed. If any of these conditions occur, contact your Icom
dealer or distributor.
R WARNING! Immediately wash, using clean water, any
part of the body that comes into contact with fluid from inside
the battery.
R WARNING! NEVER put the battery in a microwave
oven, high-pressure container, or in an induction heating
cooker. This could cause a fire, overheating, or cause the
battery to rupture.
CAUTION: Always use the battery within the specified
temperature range, for the radio –30°C to +60°C (–22°F
to +140°F), and the battery itself –20°C to +60°C (–4°F to
+140°F). Using the battery out of its specified temperature
range will reduce the battery’s performance and battery life.
Please note that the specified temperature range of the bat-
tery may exceed that of the radio. In such cases, the radio
may not work properly because it is out of its operating tem-
perature range.
CAUTION: Shorter battery life could occur if the battery is
left fully charged, completely discharged, or in an excessive
temperature environment (above +50°C; +122°F) for an ex-
tended period of time. If the battery must be left unused for a
long time, it must be detached from the radio after discharg-
ing. You may use the battery until the remaining capacity is
about half, then keep it safely in a cool dry place at the follow-
ing temperature range:
–20˚C to +50˚C (–4˚F to +122˚F) (within a month)
–20˚C to +35˚C (–4˚F to +95˚F) (within three months)
to replace the battery with a new one after five
years, even if still holds a charge. The inside battery material
will deteriorate after a period of time, even with little use.
R DANGER! NEVER charge the battery pack in ar-
eas with extremely high temperatures, such as near fires or
stoves, inside a sun-heated vehicle, or in direct sunlight. In
such environments, the safety/protection circuit in the battery
will activate, causing the battery to stop charging.
R DANGER! NEVER charge or leave the battery in the
battery charger beyond the specified time for charging. If the
battery is not completely charged by the specified time, stop
charging and remove the battery from the battery charger.
Continuing to charge the battery beyond the specified time
limit may cause a fire, overheating, or the battery may rup-
ture.
R WARNING! NEVER insert the radio (battery attached
to the radio) into the charger if it is wet or soiled. This could
corrode the battery charger terminals or damage the charger.
The charger is not waterproof.
NOTE: Charge the battery within the specified temperature
range: BC-160 and BC-171 (0˚C to +45˚C; +32˚F to +113˚F),
BC-119 and BC-121 (+10˚C to +40˚C; +50˚F to +104˚F).
Icom recommends charging the battery at +20˚C (+68˚F).
The battery may heat up or rupture if charged out of the spec-
ified temperature range. Additionally, battery performance or
battery life may be reduced.
R
DANGER! NEVER short the terminals of the battery
pack.
R
DANGER!
Use and charge only specified Icom battery
packs with Icom radios or Icom chargers. Only Icom battery
packs are tested and approved for use with Icom radios or
charged with Icom chargers. Using third-party or counterfeit
battery packs or chargers may cause smoke, fire, or cause
the battery to burst.
R WARNING! NEVER hold the radio that the antenna
is very close to, or touching exposed parts of the body, es-
pecially the face or eyes, while transmitting. The radio will
perform best if the microphone is 5 to 10 cm (2 to 4 inches)
away from the lips and the radio is vertical.
R WARNING! NEVER operate the radio with a head-
set or other audio accessories at high volume levels. Hear-
ing experts advise against continuous high volume operation.
If you experience a ringing in your ears, reduce the volume
level or discontinue use.
R WARNING! NEVER operate the radio while driving
a vehicle. Safe driving requires your full attention—anything
less may result in an accident.
CAUTION: MAKE SURE the flexible antenna, battery
pack and jack cover are securely attached to the radio, and
that the antenna and battery pack are dry before attachment.
Exposing the inside of the radio to dust or water will result in
serious damage to the radio.
DO NOT
operate the radio near unshielded electrical blast-
ing caps or in an explosive atmosphere.
DO NOT push [PTT] when you do not actually intend to
transmit.
DO NOT
use or place the radio in direct sunlight or in ar-
eas with temperatures below –30°C (–22°F) or above +60°C
(+140°F). The basic operations, transmission and reception of
the radio are guaranteed within the specified operating tem-
perature range. However, the LCD display may not be operate
correctly, or show an indication in the case of long hours of
operation, or after being placed in extremely cold areas.
DO NOT modify the radio. The specifications may change
and then not comply with the requirements of a corresponded
regulation. The radio warranty does not cover any problems
caused by unauthorized modification.
DO NOT
use harsh solvents such as benzine or alcohol
when cleaning, as they will damage the radio surfaces.
The radio will become hot when operating
it continuously for long periods of time.
The radio meets IP67 requirements for
dust-tight and waterproof protection. However, once the radio
has been dropped, dust-tight and waterproof protection can-
not be guaranteed because of possible damage to the radio’s
case or the waterproof seal.
Even when the radio power is OFF, a slight current still flows
in the circuits. Remove the battery pack from the radio when
not using it for a long time. Otherwise, the installed battery
pack will become exhausted, and will need to be recharged
or replaced.
MAKE SURE to turn the radio power OFF before con-
necting the supplied or optional equipment.
EXPLICIT DEFINITIONS
PRECAUTIONS
PRECAUTIONS (Continued)
The GPS receiver may not work if the transceiver transmits
near the 510 MHz. This is made in the internal circuit and
does not indicate a transceiver malfunction.
Icom, Icom Inc. and the Icom logo are registered trademarks of Icom
Incorporated (Japan) in Japan, the United States, the United King-
dom, Germany, France, Spain, Russia and/or other countries.
All other products or brands are registered trademarks or trademarks
of their respective holders.
This equipment has been tested and found to comply with
the limits for a Class A digital device, pursuant to part 15
of the FCC Rules. These limits are designed to provide rea-
sonable protection against harmful interference when the
equipment is operated in a commercial environment. This
equipment generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with the
instruction manual, may cause harmful interference to radio
communications. Operation of this equipment in a residential
area is likely to cause harmful interference in which case the
user will be required to correct the interference at his own
expense.
This device complies with Part 15 of the FCC Rules. Opera-
tion is subject to the condition that this device does not cause
harmful interference.
CAUTION:
Changes or modifications to this transceiver, not expressly
approved by Icom Inc., could void your authority to operate
this transceiver under FCC regulations.
ISO 3166-1
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
Austria
Belgium
Bulgaria
Croatia
Czech Republic
Cyprus
Denmark
Estonia
Finland
France
Germany
Greece
Hungary
Iceland
Ireland
Italy
Latvia
AT
BE
BG
HR
CZ
CY
DK
EE
FI
FR
DE
GR
HU
IS
IE
IT
LV
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
Liechtenstein
Lithuania
Luxembourg
Malta
Netherlands
Norway
Poland
Portugal
Romania
Slovakia
Slovenia
Spain
Sweden
Switzerland
Turkey
United Kingdom
LI
LT
LU
MT
NL
NO
PL
PT
RO
SK
SI
ES
SE
CH
TR
GB
>
AT
FI
IT
PL
GB
RO
BE
FR
LV
PT
IS
TR
CY
DE
LT
SK
LI
HR
CZ
GR
LU
SI
NO
DK
HU
MT
ES
CH
EE
IE
NL
SE
BG
CLEAN THE TRANSCEIVER THOROUGHLY WITH FRESH
WATER after exposure to saltwater, and dry it before operat-
ing. Otherwise, the transceiver's keys, switches and control-
lers may become unusable due to salt crystallization.
NOTE: DO NOT submerge the transceiver in water if there is
any reason (one of the following) to suspect the waterproof
protection may not be effective.
cracked or damaged
The AMBE+2™ voice coding Technology embodied in this
product is protected by intellectual property rights including
patent rights, copyrights and trade secrets of Digital Voice
Systems, Inc. This voice coding Technology is licensed solely
for use within this Communications Equipment. The user of
this Technology is explicitly prohibited from attempting to ex-
tract, remove, decompile, reverse engineer, or disassemble
the Object Code, or in any other way convert the Object Code
into a human-readable form. U.S. Patent Nos.
#5,870,405, #5,826,222, #5,754,974, #5,701,390, #5,715,365,
#5,649,050, #5,630,011, #5,581,656, #5,517,511, #5,491,772,
#5,247,579, #5,226,084 and #5,195,166.
Your Icom radio generates RF electromagnetic en-
ergy during transmit mode. This radio is designed for
and classified as “Occupational Use Only”, meaning
it must be used only during the course of employ-
ment by individuals aware of the hazards, and the
ways to minimize such hazards. This radio is NOT
intended for use by the “General Population” in an uncontrolled en-
vironment. This radio has been tested and complies with the FCC
and IC RF exposure limits for “Occupational Use Only”. In addition,
your Icom radio complies with the following Standards and Guide-
lines with regard to RF energy and electromagnetic energy levels
and evaluation of such levels for exposure to humans:
Compliance with FCC Guidelines for Human Exposure to Radio
Frequency Electromagnetic Fields.
-
dard for Safety Levels with Respect to Human Exposure to Radio
Frequency Electromagnetic Fields, 3 kHz to 300 GHz.
-
ommended Practice for the Measurement of Potentially Hazardous
Electromagnetic Fields– RF and Microwave.
accessories that are listed in “OPTIONS” of the INSTRUCTIONS
sheet, are authorized for use with this product. Use of accessories
other than those specified may result in RF exposure levels ex-
ceeding the FCC and IC requirements for wireless RF exposure.
-
DO NOT operate the radio without a proper antenna attached, as
this may damaged the radio and may also cause you to exceed
FCC and IC RF exposure limits. A proper antenna is the antenna
supplied with this radio by the manufacturer or antenna specifically
authorized by the manufacturer for use with this radio.
DO NOT transmit for more than 50% of total radio use time (“50%
duty cycle”). Transmitting more than 50% of the time can cause
FCC and IC RF exposure compliance requirements to be exceed-
ed. The radio is transmitting when the LED indicator lights red. You
can cause the radio to transmit by pressing the “PTT” switch.
the antenna at least 2.5 cm (1 inch) away from the
body when transmitting and only use the Icom belt-clips listed in
“OPTIONS” of the INSTRUCTIONS sheet when attaching the radio
to your belt, etc., to ensure FCC and IC RF exposure compliance
requirements are not exceeded. To provide the recipients of your
transmission the best sound quality, hold the antenna at least 5 cm
(2 inches) from your mouth, and slightly off to one side.
The information listed above provides the user with the information
needed to make him or her aware of RF exposure, and what to do
to assure that this radio operates with the FCC and IC RF exposure
limits of this radio.
During transmissions, your Icom radio generates RF energy that can
possibly cause interference with other devices or systems. To avoid
such interference, turn off the radio in areas where signs are posted
to do so. DO NOT operate the transmitter in areas that are sensitive
to electromagnetic radiation such as hospitals, aircraft, and blasting
sites.
The radio transmitter is used in situations in which persons are ex-
posed as consequence of their employment provided those persons
are fully aware of the potential for exposure and can exercise control
over their exposure.
WARNING
CAUTION
FCC INFORMATION COUNTRY CODE LIST
VOICE CODING TECHNOLOGY
RECOMMENDATION
SAFETY TRAINING INFORMATION
Votre radio Icom produit une énergie électroma-
gnétique de radiofréquences (RF), en mode de
transmission. Cette radio est conçue pour un
«usage professionnel seulement» et classée
comme tel, ce qui signifie qu’elle doit être utilisée
uniquement dans le cadre d’un travail par des per-
sonnes conscientes des dangers et des mesures visant à minimiser
ces dangers. Elle N’EST PAS conçue pour une «utilisation grand
public», dans un environnement non contrôlé.
Cet appareil a été évalué et jugé conforme, aux limites d’exposition
aux RF de la FCC et d’IC, pour une «utilisation grand public». En
outre, votre radio Icom satisfait les normes et directives qui suivent en
matière de niveaux d’énergie et d’énergie électromagnétique de RF et
d’évaluation de tels niveaux en ce qui concerne l’exposition humaine:
«Evaluating Compliance with FCC Guidelines for Human Exposure
to Radio Frequency Electromagnetic Fields».
C95.1-1992 sur les niveaux de sécurité compatibles avec l’exposi-
tion humaine aux champs électromagnétiques de radiofréquences
(3 kHz à 300 GHz).
recommandée du champ magnétique potentiellement dangereux
des radiofréquences et des micro-ondes.
sont approuvés pour une utilisation avec ce produit. L’utilisation
d’accessoires autres que ceux précisés peut entraîner des niveaux
d’exposition aux RF supérieures aux limites établies par la FCC et
d’IC en matière d’exposition aux RF sans fil.
NE PAS faire fonctionner la radio sans qu’une antenne appropriée
y soit fixée, car ceci risque d’endommager la radio et causer une
exposition supérieure aux limites établies par la FCC et d’IC. L’an-
tenne appropriée est celle qui est fournie avec cette radio par le
fabricant ou une antenne spécialement autorisée par le fabricant
pour être utilisée avec cette radio.
NE PAS émettre pendant plus de 50 % du temps total d’utilisation
de l’appareil («50 % du facteur d’utilisation»). La notion «50% du fac-
teur d’utilisation» s’applique également au mode VOX/PTT. Émettre
pendant plus de 50 % du temps total d’utilisation peut causer une
exposition aux RF supérieure aux limites établies par la FCC et d’IC.
Lorsque le voyant DEL rouge s’allume, cette radio est en train d’émet-
tre. La radio émettra si vous appuyez sur le bouton du microphone.
TOUJOURS l’antenne éloignée d’au moins 2,5 cm de votre
corps au moment d’émettre et utiliser uniquement l’attache pour
ceinture Icom illustrée dans “Options” de la feuille d'instructions,
lorsque vous attachez la radio à votre ceinture, ou à autre chose,
de façon à vous assurer de ne pas provoquer une exposition aux
RF supérieure aux limites fixées par la FCC et d’IC. Pour offrir à vos
interlocuteurs la meilleure qualité de transmission possible, tenez
l’antenne à au moins 5 cm de votre bouche et légèrement de côté.
Les renseignements ci-dessus fournissent à l’utilisateur toute l’in-
formation nécessaire sur l’exposition aux RF et sur ce qu’il faut faire
pour assurer que cette radio fonctionne en respectant les limites
d’exposition aux RF établies par la FCC et d’IC.
En mode de transmission, votre radio Icom produit de l’énergie de
RF qui peut provoquer des interférences avec d’autres appareils ou
systèmes. Pour éviter de telles interférences, mettez la radio hors
tension dans les secteurs où une signalisation l’exige. NE PAS faire
fonctionner l’émetteur dans des secteurs sensibles au rayonnement
électromagnétique tels que les hôpitaux, les aéronefs et les sites de
dynamitage.
Ce radio émetteur est utilisé dans des cas où des personnes sont
exposées en raison de leur travail, pourvu qu’elles soient conscien-
tes du risque d’exposition et qu’elles puissent exercer un contrôle
sur cette exposition.
About the LED indicator D
About the Multi connector D
CAUTION:
V H F DIG IT AL T R A N S C E I V E R S
UHF DI GITAL T R A N S C E I V E R S .
READ ALL INSTRUCTIONS-
Iç-F4360D
Iç-F3360D
Battery pack Belt clip
Connector cover
(with screw)
Flexible antenna
(This illustration is
for the UHF type.)
Antenna
connector
[Selector]
[Emer]*
[Side1]*
[PTT]
[Side2]*
[Side3]*
10-keypad
[P0][P1]
[P2][P3]*
Function display
(LCD)
Microphone
Speaker
LED indicator
Multi connector
[VOL]
GPS Receiver
SUPPLIED ACCESSORIES
PANEL DESCRIPTION
FUNCTION DISPLAY
Turning power ON D
➥
Receiving and Transmitting D
CAUTION: -
Receiving:
q
w
Transmitting:
q
w
IMPORTANT:
BASIC OPERATION
-
FOREWORD
-
q SIGNAL STRENGTH ICON
w LOW POWER ICON
e AUDIBLE ICON
➥
➥
r SCRAMBLER ICON
t SCAN ICON
y MESSAGE ICON
u BELL ICON
IC-F3360D
qwe rt y u i o
!0
!2
!3
i GPS ICON
o BATTERY ICON
!0 SCAN TARGET CHANNEL ICON
!1 VOX ICON
!2 ALPHANUMERIC DISPLAY
!3 KEY ICONS
!4 SCAN TARGET ZONE ICON
!1
!4
BATTERY PACKS D
LION B AT T E R Y P A C K
VHF UHF
Digital
mode
Analog
mode
Digital
mode
Analog
mode
B A T T E R Y C A S E
×
B A T T E R Y C A S E
×
DC CABLES D
C I G A R E T T E L I G H T E R C A B L E
D C P O W E R C A B L E S
CHARGERS D
D E S K T O P C H A R G E R C H A R G E R A D A P T E R
A C A D A P T E R
-
M U L T I -C H A R G E R C H A R G E R A D A P T E R
A C A D A P T E R
-
D E S K T O P C H A R G E R A C A D A P T E R
-
D E S K T O P C H A R G E R A C A D A P T E R
-
BELT CLIPS D
S W I V E L B E L T C L I P
B E L T C L I P
L E A T H E R B E L T H A N G E R
ANTENNAS D
S T U B B Y A N T E N N A S
F L E X I B L E A N T E N N A S
C U T A N T E N N A S
H I G H G A I N A N T E N N A S
OTHERS D
A C C A D A P T E R
-
CAUTION:-
NEVER
S P E A K E R M I C R O P H O N E
P T T S W I T C H C A B L E H E A D S E T
V E H I C L E C H A R G E R B R A C K E T
D E S K T O P C H A R G E R
-
OPTIONS
BATTERY CHARGING
D
AC adapter
(A different type, or no AC
adapter is supplied, de-
pending on the version.)
Optional OPC-515L* (for
13.8 V power source) or
CP-23L (for 12 V cigarette
lighter socket) can be used
instead of the AC adapter.
CAUTION: NEVER connect the OPC-
515L to a power source using reverse
polarity. This will ruin the battery charger.
White line: Black line :
*
Transceiver
Battery
pack
AD-106 charger
adapter is installed
in the BC-119N.
Tu rn OFF
the power
D
Charging time
-
AC adapter
(A different type, or no AC adapter is
supplied, depending on the version.)
Transceiver
Battery
pack
Optional OPC-515L* (for
13.8 V power source) or
CP-23L (for 12 V cigarette
lighter socket) can be used
instead of the AC adapter.
CAUTION: NEVER
connect the OPC-
515L to a power
source using reverse
polarity. This will ruin
the battery charger.
White line:
Black line :
*
Tu rn OFF
the power
D
C H A R G E R A D A P T E R
q C H A R G E R A D A P T E R
w
Screws supplied
with the charger
adapter
AD-106
Plugs
Sockets
This illustration shows
the BC-119N.
IMPORTANT: Battery charging caution
CAUTION:
NEVER
+ _
Guide rail
Tabs
D
-
Transceiver
Battery
pack
AD-106 charger
adapters are installed
in each slot.
Tu rn OFF the power
OPC-656* DC power cable
(Connect with a DC power supply;
13.8 V/at least 7 A)
*Polarity of the OPC-656
Red line : Black line :
AC adapter