ICOM orporated 376901 UHF Digital Transceivers User Manual IC F5400D F6400D Series Instructions

Download:
Mirror Download [FCC.gov]
Document ID	3104954
Application ID	VHBSeYa1hJOyZAeQlY6nDQ==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	79.86kB (998257 bits)
Date Submitted	2016-08-19 00:00:00
Date Available	2016-12-15 00:00:00
Creation Date	2017-12-12 22:16:37
Producing Software	GPL Ghostscript 9.18
Document Lastmod	2017-12-12 22:16:37
Document Title	IC-F5400D/F6400D Series Instructions
Document Creator	Adobe InDesign CS6 (Windows)
Document Author:	Icom Inc.

FUNCTION DISPLAY
INSTRUCTIONS
LCD type
VHF DIGITAL TRANSCEIVERS
Icon Area
Iç-F5400D series
UHF DIGITAL TRANSCEIVERS
NOTE: The screen capture
shows an example.
Display position of each
icon differ, depending on
the function being used.
Text Area
Iç-F6400D series
Thank you for choosing this Icom product.
READ ALL INSTRUCTIONS carefully and completely
before using this product.
Key Icon Area
SUPPLIED ACCESSORIES
IMPORTANT
D Icon Area
BROADCAST CALL ICON
Indicators
• Displayed when the Broadcast Call function is ON.
• Blinks while receiving a Broadcast Call.
q SIGNAL STRENGTH INDICATOR
Displays the relative received signal strength.
w CLOCK
Displays the current time.
SITE LOCK ICON
Displayed when the Site Lock function is ON.
LONE WORKER ICON
Displayed when the Lone Worker function is ON.
Icons
POWER ICON
NOISE CANCEL ICON
Displayed when the Noise Cancel function is ON.
• “L1” is displayed when the output power is set to low.
• “L2” is displayed when the output power is set to mid.
• “H” is displayed when the output power is set to high.
SURVEILLANCE ICON
Displayed when the Surveillance function is ON.
AUDIBLE ICON
Displayed when the channel is in the ‘audible’ (unmute)
mode.
VOX ICON
Displayed when the VOX function is ON.
MESSAGE ICON
• Displayed when Bluetooth® is activated.
• Lights Blue when a Bluetooth® device is connected.
• Does not light when there is no Bluetooth® device connected.
Bluetooth® ICON
• Displayed when a received message (Short Data Message or
Status Message) is stored in the message memory.
• Blinks when an unread message is in the message memory.
microSD ICON
Displayed when a microSD card is inserted.
BELL ICON
Displayed when a matching signal is received, depending
on the presetting.
This instruction sheet includes some functions that are
usable only when they are preset by your dealer. The
transceiver may have other functions and operations that
are not described in this instruction sheet. Ask your dealer
for preset function details.
USB ICON
Displayed when a USB device is connected.
• Displayed while scanning.
• Blinks while a scan is paused.
D Text Area
SCAN TARGET CHANNEL ICON
• Displayed when the channel is selected as a scan target channel.
Displays the selected Zone number, Channel number, and
Channel name, if set.
SCRAMBLER ICON
// for the Analog mode //
D Key Icon Area
• Displayed when the Voice Scrambler function is ON.
• Blinks when receiving a scrambled signal.
Displays the assigned function of [P1] and [P2].
 Ask your dealer about the assigned Software key function.
// for the Digital mode //
• Displayed when the Voice Encryption function is ON.
• Blinks when receiving an encrypted signal.
GPS ICON
Microphone
Microphone
Microphone hanger Microphone
and screw set
hanger cable
ANTENNA
A key element in the performance of any communication
systems is the antenna. Contact your dealer for information
regarding antennas and how to install them.
Mounting bracket
Microphone hanger
and screw set
DC power cable
FUSE REPLACEMENT
Fuses are installed in the supplied DC power cable. If a fuse
blows, track down the source of the problem, repair it, and
then replace the damaged fuse with a new rated one.
 Fuse rating: 20A
USE only 20 A fuses
Bracket bolts
Mounting screws
(M5×12)
Self-tapping screws
(M5×16)
Flat washers
Spring washers
Nuts
NOTE: Some accessories may not be supplied, or the
shape may be different, depending on the transceiver
version.
CLEANING
If the transceiver becomes dusty or dirty, wipe it clean with a
soft, dry cloth.
DO NOT use harsh solvents such as Benzine or
alcohol, as they may damage the transceiver's
surfaces.
Segment type
• Displayed when a valid position data is received.
Self-grounding type
OR
 “R” is displayed when the microSD card has not been formatted.
SCAN ICON
Non-self-grounding type
RECORD ICON
• Displayed when the Record function is ON.
• Blinks while recording the audio.
Icom, Icom Inc. and the Icom logo are registered trademarks of Icom Incorporated (Japan) in Japan, the United States, the United Kingdom, Germany,
France, Spain, Russia, Australia, New Zealand, and/or other countries.
The Bluetooth word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Icom inc. is under license.
All other products or brands are registered trademarks or trademarks of their
respective holders.
Displays the selected
channel number.
TALK AROUND ICON
Displayed when the Talk Around function is ON.
PHONE ICON
• Displayed when the transceiver is connected to a telephone
network on the selected channel.
• Blinks while receiving a phone call.
–1–
–4–
1-1-32 Kamiminami, Hirano-ku, Osaka 547-0003, Japan
A-7312D-1EX
Printed in Japan
© 2016 Icom Inc.
PANEL DESCRIPTION
REAR PANEL CONNECTION
NOTE: Different functions may have been assigned to the keys by your dealer, except for the Power key.
Antenna
LCD type
Status
indicator
Function
display
q ANTENNA CONNECTOR
Connect to an antenna. Contact
your dealer about antenna selection
and placement.
w GPS ANTENNA CONNECTOR
Connect the UX-241 GPS antenna.
[OK] [Emer]
[VOL]
[Up]/[Down]
[Right]/[Left]
Microphone
connector
Speaker
[P1]
Segment type
Status
indicator
[P2]
R WARNING! NEVER
remove the fuse
holders from the DC
power cable.
Fuse holders
[Back] Power key
Function
display
Non-self-grounding type
[Up]
[Emer]
Red
Black
NOTE: Use the terminals as shown
below for the cable connections.
Crimp
12 V
Battery
[VOL]
Self-grounding type
Solder
Speaker
Microphone
connector
F1
F2
[F1] [F2]
F3
[F3]
Power key
[Down]
D About the Status indicator
D About the Microphone connector
• Lights red while transmitting.
• Lights green while receiving a signal, or when the squelch is
open.
Connect the supplied or optional microphone.
NEVER connect non-specified microphones. The pin
assignments may be different and may damage the
transceiver.
e EXTERNAL SPEAKER JACK
u MICROPHONE HANGER
Connect a 4 ~ 8 Ω external speaker.
For a non-self-grounding type:
Connect the supplied microphone hanger
r IGNITION LEAD
to the vehicle’s ground for microphone
Connects to an ignition line.
ON/OFF hook functions.
R Do not put pressure on this
For a self-grounding type:
lead. Binding to the DC power
The microphone ON/OFF hook functions
cable is recommended.
can be used without the vehicle’s ground.
t D-Sub 25-pin
i Connects to a 12 V DC battery.
Connects to an external unit.
Pay attention to polarities. NEVER connect
to a 24 V battery.
y USB CABLE
This will damage the transceiver.
Connects to a PC.
Connect the microphone
hanger to the vehicle’s
ground for microphone
ON and OFF hook
functions when the
HM-221/HM-221T
User supplied
microphone is used.
OPTIONS
BASIC OPERATION
D Turning power ON
• RMK-5 SEPARATION KIT + OPC-2364 SEPARATION CABLE
Enables you to separately install the transceiver’s main
unit from the front panel for convenient operation.
Hold down [ ] for 2 seconds to turn ON the transceiver.
D Receiving and Transmitting
• RMK-7 DUAL HEAD KIT + OPC-2364 SEPARATION CABLE
Enables you to separately install the transceiver’s main
unit from the front panel for convenient operation.
Receiving:
1. Push [Up] or [Down] to select a channel.
2. When receiving a call, rotate [VOL] to adjust the audio
output level to a comfortable listening level.
• SP-30, SP-35, SP-35L EXTERNAL SPEAKERS
Input impedence: 4 Ω
SP-30:
Rated input= 20 W, Maximum input = 30 W
SP-35/SP35L: Rated input= 5 W, Maximum input = 7 W
Transmitting:
1. Wait until the channel is clear to avoid interference.
2. While holding down [PTT], speak at your normal voice
level.
3. Release [PTT] to receive.
• HM-218, HM-220, HM-220T, HM-221, HM-221T
HAND MICROPHONES
HM-218:
HM-220:
HM-220T:
HM-221:
HM-221T:
IMPORTANT:
To maximize the readability of your signal:
1. After pushing [PTT], pause briefly before you start
speaking.
2. Hold the microphone 5 ~ 10 cm (2 ~ 4 inches) from your
mouth, then speak at your normal voice level.
–2–
When using a self-grounding type:
Command microphone with a built-in speaker
Self-grounding heavy duty microphone
Self-grounding heavy duty DTMF microphone
Hand microphone
DTMF microphone
• SM-29 DESKTOP MICROPHONE
• UX-241 GPS ANTENNA
Enables you to use the GPS function.
–3–

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : Yes
Encryption                      : Standard V4.4 (128-bit)
User Access                     : Print, Copy, Extract, Print high-res
Author                          : Icom Inc.
Create Date                     : 2016:05:16 14:08:47+09:00
Modify Date                     : 2016:08:17 09:39:56-04:00
XMP Toolkit                     : Adobe XMP Core 5.2-c001 63.139439, 2010/09/27-13:37:26
Instance ID                     : uuid:152061d7-b8b8-4109-926d-f2240731c074
Original Document ID            : adobe:docid:indd:3c0bbfe1-c10b-11e3-810c-c1dda02cd51f
Document ID                     : xmp.id:92B3513E241BE611A215F75296FADA94
Rendition Class                 : proof:pdf
Version ID                      : 1
Derived From Instance ID        : xmp.iid:91B3513E241BE611A215F75296FADA94
Derived From Document ID        : xmp.did:C43A86DAB506E611831FC8A5BE59461D
Derived From Original Document ID: adobe:docid:indd:3c0bbfe1-c10b-11e3-810c-c1dda02cd51f
Derived From Rendition Class    : default
History Action                  : converted
History Parameters              : from application/x-indesign to application/pdf
History Software Agent          : Adobe InDesign CS6 (Windows)
History Changed                 : /
History When                    : 2016:05:16 14:08:47+09:00
Metadata Date                   : 2016:08:17 09:39:56-04:00
Creator Tool                    : Adobe InDesign CS6 (Windows)
Format                          : application/pdf
Title                           : IC-F5400D/F6400D Series Instructions
Creator                         : Icom Inc.
Producer                        : Adobe PDF Library 10.0.1
Trapped                         : False
GTS PDFX Version                : PDF/X-1:2001
GTS PDFX Conformance            : PDF/X-1a:2001
Page Count                      : 2

EXIF Metadata provided by EXIF.tools